After reinstall my magic mouse and keyboard are not working properly

so i've had various problems with my mac so did a clean reinstall, now my magic mouse wont scroll and my the f buttons on my wireless keyboard don't work ie volume buttons, i've checked the system preferences and all is well there, any ideas????
i have a 2008 24' imac

Hi
It is not easy to say much about this issue.
Do you use wireless devices? Are batteries OK?
Have you noticed the same problem using other USB devices?
I presume both devices uses USB port on your notebook.

Similar Messages

  • TS3048 turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?

    Try resetting the SMC (no peripherals required).
    Barry

  • Touchsmart 520-1047c Mouse and Keyboard will not work after sleep mode

    I have an issue which I need some help with. When my computer goes to sleep the wireless mouse and keyboard will not work unless I restart, however each one will wake the system up but will not operate after that. I have tried just making the display go to sleep, both go to sleep but that makes no difference same issue occurs. The only work around I have found is going into the power settings and turning the sleep mode off for booth the computer and display. This does not solve the problem it just masks it. New batteries, unplugged and replugged the dongle, updated the bios and all drivers. Don't know what else to try. Anybody know how to fix this? Thank you in advance for your help.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that the mouse and keyboard on your desktop computer does not work if your computer enters sleep mode, and I would be happy to assist you in this matter! To correct this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). This should help enable your system to wake from sleep mode using your wireless keyboard and mouse. I also recommend connecting wired peripherals to diagnose the functionality of your keyboard and mouse. If your system is still not able to wake from sleep mode, please follow the steps below to restore the default power schemes on your computer: Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command PromptStep 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter  reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards  

  • Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

    Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
    In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
    I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

    We're sorry.
    We can't find the article you're looking for.
    Please return to the Apple Support homepage.
    Sigh.

  • TS3048 I can't log in the mouse and keyboard are not paired to computer

    I can't log in to my computer because both the mouse and keyboard lights are blinking

    Hello:
    Try resetting the SMC (no peripherals needed).
    Barry

  • Windows 10 install (64 bit). Mouse and keyboard do not work, can't click through setup configuration.

    I've tried with both upgrade and iso installation (starting from Windows 7), but for some reason, after setup is finished and I get into the configuration area (IE, accepting license agreements or choosing network or choosing express setup), I do not have
    a mouse and keyboard to do anything with.  The keyboard and mouse are powered, but aren't giving input.  For example, toggling cap's lock does not show up on the keyboard's lights.
    Keyboard is Razer Black Widow, mouse is Gigabyte M8000X.  I also tried with a Microsoft wireless mouse/keyboard pair with the Razer unplugged during setup (Reason being, a separate razer setup window would appear during the 'configuring devices' stage).
     I am able to install to virtual box, but I've only tried the 32 bit installer.  I have not yet tried the 32 bit installer on the actual machine, and I have not yet tried booting to the CD.

    Review these,
    http://www.tenforums.com/tutorials/1950-windows-10-technical-preview-clean-install.html
    http://www.tenforums.com/tutorials/2108-windows-10-dual-boot-windows-7-windows-8-a.html
    http://www.tenforums.com/tutorials/2087-hyper-v-virtualization-setup-use-windows-10-a.html

  • Magic mouse and number keys not working

    Last year, Wet Baloney had a problem:
    I have a first generation iMac with the wireless keyboard of that vintage and a new Magic Mouse.
    All of a sudden the keys on the numeric keypad part of the keyboard do not work. The number
    keys at the top do work.
    Also (all of a sudden) this computer is not detecting my wireless Magic Mouse. There is no battery
    problem. The mouse works fine with my MacBook Pro.
    Does anyone have any troubleshooting ideas ??
    While this question was not answered, Apple decided to archive it anyway so I'm reposting. I had this problem and my sysadmin wizard figured out what is happening. The solution is to open "System Preferences" --> "Universal Access" and select Mouse. Turn off "Mouse Keys". What I don't know is how that got turned on but it happened when I did a Mac OS update that came out around March 28, 2011. Anyway, that fixed both the mouse and the keypad problems. I'm posting so that someone doing the same search I did can find this answer.

    Thank You for this!! I was having problems using my Numeric keypad on a wired keyboard - when I used the number keys, the wireless magic mouse would lock up - the only way out was to Force Close the Application . . . Turning off "Mouse Keys" and hitting Shift > Clear turned everything back to normal.

  • Bluetooth mouse and keyboard do not work

    I purchased an iMac G5 about 6 months ago. I got it with a bluetooth mouse and keyboard. I have had trouble with it from day 1. Apple had me replace the logic unit, and it worked for a couple of weeks. Then as soon as the 90-day warranty for complimentary service ran out, it began working sporadically. Now it doesn't work at all. It says I don't have a bluetooth module installed or attached to my computer (which is what it said before the logic unit was replaced. The computer works fine with a USB mouse and keyboard. Had I known bluetooth was so tempermental and difficult, I sure wouldn't have got it with my computer.
    Unless there is a smart person out there who knows what is going on, I guess I need to buy a new USB keyboard and mouse. Anybody interested in buying a bluetooth keyboard and mouse cheap?

    Russell,
    The warranty period on your mac is 1 year. The complimentry phone service period is 90 days unless you have a hardware problem. I'd say you likely have a hardware problem and will not be charged for the phone call.
    I'd suggest 2 things:
    1. Sign up for Applecare as has been recommended countless times.
    2. Make the call to tech support and see what they say about your problem.
    Good Luck,
    John

  • Bluetooth Mouse and keyboard STILL Not working can someone help me?

    i have an apple Bluetooth Keyboard and wireles mighty mouse. Since i have installed leopard months ago it was working fine but then my mouse and keyboard stopped pairing with my Powerbook it recognises the devices but the refuse to pair i changed the batteries and installed the software that cam ith the keyboard and mouse and still nothing works.
    Can someone help me please

    After updating to 10.5.2 I am still experiencing problems with my Apple wireless mouse and keyboard. This is a Leopard issue ( here is just one blog on the topic
    http://aralbalkan.com/1086 ) in 2005 I purchased a Mac Mini which I love and never experienced a Bluetooth problem till I installed Leopard several months ago, now at least once a week, on average 2-3 times a week, I loose connection with the keyboard or the mouse and it takes awhile to re-establish the connection. I was hoping the last upgrade would address this issue but no such luck.

  • Letters on my keyboard are not working properly?

    I turned on my HP pavilion dv6 3032 month ago, and noticed that some of the keys I was clicking weren't showing up. And keys still not working.
    The following keys are the ones that aren't working:
    The left "shift" key, z, left "fn" key, x, c, v, space bar, m, <, >, and ? key. Basically the whole bottom row of letters are NOT working except "b" and "n" ARE working for some odd reaso.
    I found in internet that i'm not only one who have the same problem.
    https://answers.yahoo.com/question/index?qid=20130711150142AAgpXRt
    Can somebody help me solve this problem please.

    Hi Neatceros,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion dv6-3032nr  Notebook  and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically. You might need to update the BIOS.  If this does not help  please call our technical support at 800-474-6836. If you are calling within North America, the number is 1-800-474-6836 and for all other regions click here.
    They will be able to assist you.
    Let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Bluetooth and calls are not working properly

    Please somebody help me!!!
    I have a Hyundai Elantra 2012 and a Curve 9300, the bluetooth has been working fine for a year, however my phone is having problems to connect to my car, what is funny is that I can watch a video and the sound will come out from my car's speakers, I can be listening to a mp3 by using the car's speaker, but phone calls won't get through, I tried to connect my wife's BB10 to my car and everything is perfect.
    My question is, what went wrong???
    Thank you!!!

    I have a similar problem
    Product - HP Pavillion dv6 7135nr
    OS - Win 8
    Bios - F24
    After updgrading from win 7 to win 8 following are the issues I am facing
    a. Wi-Fi not working
    b. Bluetooth not working
    Earlier I spoke to online chat and on their advise updated the drivers for my laptop
    From the link
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&amp;dlc=en&amp;lc=en&amp;product=5273543&a...;
    Following were installed successfully but still the wifi n bluetooth are not working
    1. Ralink 802.11 Wireless LAN Adapter - but problem is not resolved.
    On troubleshooting the network connection - I'm able to enable / disable the wireless adaptor but not able to connect. as it says its OFF.
    The wireless on/off function key is continuously showing red light and its not switching on
    2. Broadcom Bluetooth Software - was installed when i connected through lan cable. 
    3. Also installed the latest broadcom driver frrom ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61836.exe was installed
    4. The HP Wireless Button driver sp59835 available at
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-112632-1
     was also installed
    Funnily, at times the wifi starts working and the colour of the F12 key changes to white after the laptop has been on sleep mode. Although this does not happen everytime it wakes up from sleep mode.
    Pl. give some solution

  • Color Swatches in Toolbar for Fill and Stroke are not working properly.

    The color swatches in toolbar for fill and stroke are not functioning as they should.  When I select an object on the artboard, the swatches display fine in the toolbar for what they should be.  However, when I double-click on those swatches from within the toolbar to modify the color, the color which comes up is #000000 instead of the actual color it should be. 
    I am using 16.2.1 (cloud) for Mac OS 10.8.2
    I've submitted a bug report, but want to know if anyone else has had this issue and what they did to resolve the issue.
    Also, the eyedropper tool is buggy and occasionally places the #000000 into an object instead of the characteristics the eyedropper is selecting.  I don't have any hidden layers or weird groupings, it just randomly decides when it is going to work or not.
    I've never had these issues on previous versions of illustrator and have been proficient in all versions since 2007.

    Double click the eyedropper, and turn on appearance, is off by default.
    For your #000000 color problem that also likely is related to appearance setting. You may have for example have some with #000000 at the character level, and another color at the type level.

  • Please help!  my iMac keeps freezing, mouse and keyboard do not work after

    Early this morning I turned on my iMac and started downloading updates through software update as usual. I was browsing a website in Safari when all of a sudden the "zoom" feature activated itself and I could not turn it off. I restarted and the keyboard started typing different characters but not letters, so I took out my installation CD and it took me quite a while to reboot the computer using the CD as a startup. Since the keyboard had a different input, the C key was not running the CD. I tried loggin into the support page, but it downloaded the links into the desktop. I used system utilities to restart the computer from the CD, I verified the Disk Permissions, then Repaired the permisions, then the Verify Disk and then the Repair disk, in that order. I restarted the computer and everything seemed fine, but after a couple of minutes the mouse starts closing windows, downloading website links into the desktop and then the keyboard freezes and does not let me type! This has repeated over and over, and I don't know what to do!
    Posting this message has been quite an achievement, because I have restarted the computer a lot of times in order to finish.
    Someone please help! I don't know what else to do!!!
    Thanks!

    Yes. And since you aren't backed up, you may have to use Prosoft Data Rescue to try to recovery any information that is critical. First though, do you have another Mac you can hook this one up to using Target Disk Mode?
    If you do, that's another way to rescue information. Target Disk Mode is explained here:
    http://docs.info.apple.com/article.html?artnum=58583
    Similarly, if you have a bootable external hard drive, you can try to boot off that with the Startup manager:
    http://docs.info.apple.com/article.html?artnum=106178
    To rescue your information. This at least will allow you to do further analysis to see what data corruption might have happened. If the drive is invisible when booted off another, that may indicate a directory issue. But first let's see if we can attach or boot off another and see the internal drive of the machine.

  • Mouse and keyboard shortcuts not working

    I running Firefox 3.6.12 on a Mint 10 Gnome system. Firefox has worked very well for the past month with no problems. Today the mouse quit working when trying to click on any of the pulled down menus at the top, "File, Edit, View..." it also will not work on any pull down menus on screen, address bar, stumble tools... The shortcut keys for the top menu are also not working, Alt F will not pull the file menu down. The mouse works on links and single buttons such as the stumble button or bookmark buttons. Also, right clicking does not work anywhere in Firefox, but works in other programs.
    I have rebooted the system and uninstalled and reinstalled Firefox to no avail. Any help would be greatly appreciated.

    I started Firefox in safe mode and everything started working as it should.
    Restarted in normal mode and everything is again working, I didn't make any changes.
    The theme was set at default as I have never changed it. I installed all the addons when I first got Firefox, no new ones have been added in over a month.
    Does starting in safe mode reset the addons and plugins? Curious as to why starting in safe mode corrected the problem.

  • MAC Mouse and Keyboard Do Not Work, when I am trying to re-install the OS using "Command R" option

    I am trying to re-install MAC OS 10.8.2, but when I hold "command R" I am asked for the firmware password, but the keyboard and mouse do not work.
    If I only select "option" during the boot up process it will ask me for the firmware password, keyboard and mouse work, but I can only select the HD option.
    Can someone advise what is the problem here, and your resolution.
    I have tried different commands "option + command + R' with no luck.

    I tried what was provided on the link, but it is not working.
    I hold it down, before the gray screen and the chime, but it only prompts but the firmware password.
    I tried based on the specific order in the support document and at a random press and hold.
    No go any other thoughts?

Maybe you are looking for