After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

Thanks Ian! I see the other topics now, and I did the deauthorize thing, although it said this computer was not authorized (I know it was because I just bought songs on it.) So I authorized it again and now it works fine! Except now it says there are 3 computers authorized, I only have 2. I guess it thinks this computer is authorized twice now somehow? I hope this bug gets fixed.

Similar Messages

After upgrading to 8.1 my new ipad works very slowly

after upgrading to 8.1 my new ipad works very slowly. Constant errors safari, slow text input, slow ibook

Apple does not support iOS downgrades.
I would take it in for diagnosis/testing.
Barry

Apps keep crashing after reinstalling Yosemite

Several applications on my computer always crash at startup after I attempted to reinstall Yosemite.I checked the crash logs and I saw something common of these crashed applications:
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000000
0x981d1000 - 0x981d9fff libsystem_pthread.dylib (105.10.1) <4A229519-29A1-3ABF-8CEF-43BCE4ACDA06> /usr/lib/system/libsystem_pthread.dylib
Any help will be greatly appreciated.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

After reinstalling Yosemite I cannot run Mail anymore

I reinstalled Yosemite and my mail app and contacts app don't work anymore. When I open the application it prompts me to begin the message import process.
I click 'continue' but nothing happens.

The Adobe Updater does seem to work in CS4 however.
A new Updater has been posted and there are a bunch of small updates for the Suite listed for downloading and installing and it would be a pain to do all of them manually.
If you have library/application Support/Adobe open while the installation is happening, you will see just how many files are being uninstalled and replaced by this operation!
I have just run the Updater (via Photoshop CS4's Help Menu) and it went flawlessly.

After reinstalling CS3 I cannot get bridge (or photoshop) to update

I had to reinstall CS3 due to some graphics issues. I've restarted the computer and bridge/ps several times...and keep hitting the update button but after updateing adobe reader..it doesn't find anymore updates. So I still have 4.0 and cannot read canon 50D raw files as well as many more issues.
I'm running 10.5.5 2,0 dual core PC chip with 5 gig ram.

The Adobe Updater does seem to work in CS4 however.
A new Updater has been posted and there are a bunch of small updates for the Suite listed for downloading and installing and it would be a pain to do all of them manually.
If you have library/application Support/Adobe open while the installation is happening, you will see just how many files are being uninstalled and replaced by this operation!
I have just run the Updater (via Photoshop CS4's Help Menu) and it went flawlessly.

Keeping backup history after reinstalling Yosemite

Can I reinstall (clean) Yosemite and keep my backup history?

Have you tried making a backup of your main.db file then try viewing it with Skype log viewer or Sqlite database viewer?
http://nirsoft.net/utils/skype_log_view.html
http://sqlitebrowser.org/
https://suurjaak.github.io/Skyperious/
If the data is there you should be able to read it. If there is some corruption in the database file you can try using Skyperious to see if it can repair it or join it with another empty database file (cleared history). In any case you may want to backup your %appdata%/Skype folder before attempting such things.
If you have root access to your phone you could also try backing up that main.db file or possibly transplanting that information over to your desktop if the data is missing by replacing the current file or using Skyperious to merge the old data. Remember when you perform clean installs of your OS your Skype history does not go with you. It would be best to retrieve that main.db file from before you reloaded the OS via a planned backup. What could be happening is the data could be attempting to sync from your phone but eventually only pulls/limits the information from the cloud (up to 30 days).

Help!!after reinstall my 10.6 is not opening some internet pages!

i reinstalled my imac.now i have snow leopard 10.6 and everything great exept that not all internet pages is working.its loading and when its almoust finished its just gone.i mean no loading just white screen.any ideas?

Welcome to Apple Support Communities.
First, use the Safari menu and Empty Cache, forcing web pages to reload entirely.
If that doesn't help, check to see which version of Safari is installed now.
It's quite likely you're now on Safari 5.0.5 after the reinstall of OS X 10.6.8.
For some reason, Software Update does not offer to install the latest version.
The latest version of Safari for OS X 10.6.8 is 5.1.7, available to download from this non-Apple link at macupdate.com, a reliable vendor of Mac software. Click on 'Download Older Release' to get the correct version:
http://www.macupdate.com/app/mac/15675/apple-safari
I responded to a similar thread earlier today, although that person was having problems specifically with Flash content:
https://discussions.apple.com/message/19445640#19445640

Firefox opens pages very slowly, and flash crashes every time a new page is opened?

Every single time I open a new page, not only does it take awhile to open but I get a message saying Shockwave Flash has stopped working. I've made sure that I have the current up to date version of Adobe flash and Firefox. It's making it impossible to do my work, which requires flash player. My last 5 crash reports were there;
8b6f82df-08e3-40b8-ad20-19f877dff7a3
e957d070-838b-4cd8-a053-15e88d8e673e
bp-5f85676f-6252-40c2-b356-2ddf92141213
e37dd7c7-eadd-4889-aa46-b6b0b00c10ba
2a473716-6e36-4765-8b32-267b75198825
Looking at my crash report, Flash has crashed 28 times in the last 30 minutes.

Your crash report; bp-5f85676f-6252-40c2-b356-2ddf92141213
Process Type plugin Shockwave Flash Version:16.0.0.235
If you have problems with current Shockwave Flash plugin versions then check this:
* see if there are updates for your graphics drive drivers
'''https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration'''
* disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
'''https://forums.adobe.com/message/4468493#TemporaryWorkaround'''
* disable hardware acceleration in the Flash plugin
'''https://forums.adobe.com/thread/891337'''
See also:
* '''http://kb.mozillazine.org/Flash#Troubleshooting'''

All applications are opening/quitting very slowly or not at all.

Hi, I have a question about my MacBook Pro. Lately, when I've been opening or quitting different applications, they take several seconds to open, and they often say "Application not responding", and I have to force quit. I'm not sure what to do. Any suggestions would be appreciated. Thank you.

A few tips you can try:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh17.html
You can also boot from an installer disk, and run diskutility to repair the HD.
This article refers to starup troubles, but can also be used for other issues as well
http://docs.info.apple.com/article.html?artnum=106214
If none of this helps, post back for other ideas.
Jeff

Reader X opens Docs very slowly, need help

Just upgraded to X, prior versions opened files immediately, this version takes 10-15 seconds to open, frustratingly slow. Any recommendations to speed it back up?
Noticed a discussion that mentioned this version accesses internet with every file opened. How much data is exchanged and can this be turned off? Part of speed problem? In rural area, I have limited data usage on wireless card.

I have this problem too and I have since long suspected the sandbox to be the culprit. It wasn't until today that I started Googling it though. I first found this forum and now I think I have found the solution here:
http://www.sevenforums.com/software/131325-adobe-reader-x-very-slow-open-some-pdf-under-wi ndows-7-64-bit.html
"Go to Edit / preferences / general - then uncheck box 'Enable protected mode at startup' This got rid of the lag in opening adobe docs."
I'm trying this out now! Even though it will kill what little security Adobe has created I cannot stand the lag anymore.

Numbers runs very slowly after installing Yosemite ?

iMac (20-inch, Early 2008)
2.4 GHz Intel Core 2 Duo
4 GB 800 MHz DDR2 SDRAM
ATI Radeon HD 2400 XT 128 MB
After installing Yosemite, all my Numbers spreadsheets respond only very slowly (e.g several seconds to click open a cell or scroll to a new line).
I have updated to OS X 10.10.2 with no improvement. Has anyone else had this? Can anybody tell me how to fix it?

I have stumbled on the apparent solution to the slow Numbers issue. When I upgraded old Numbers files to the latest issue of software, and opened them from the hard drive (instead of via the original dock icon) everything worked normally, and the new dock icon [ 3.5.2 (2118) ] remained in the dock when I dropped the old one into the Trash (removing it from the dock). Incidentally, I noticed that for each Numbers file that I upgraded, the file size was roughly doubled.
Being a non-technical user I was a bit surprised that the upgrade to Yosemite didn't take care of this sort of issue, but perhaps there's someone in the community who can enlighten me ?

Laptop totally laggy and slow even after reinstall windows

Hello,
I have an issue woth my laptop. My problem is my computer has become very slow it would take a very long time to open an application. Some times the applications run by explorer would not open. Web pages take forever to load even windows explorer loads the folders very slowly. Lots of time the windows say "not responding"(incl. Chrome, FF etc.).
BUT that problems happens ocasionally. I mean laptop is doing fine for 5 minutes and that again lags etc. for like 5 minutes.
I can´t launch any game.
I reinstalled(with a format) the Windows for 3 times and problem still presists yet is was fine till 2 weeks ago.
Specs:
Hp Pavilion dv6940ec
Procesor Intel® Core™ 2 Duo T5750, 2 GHz,
RAM 3GB,
Windows 7, 32bit,
NVIDIA® GeForce™ 8400M GS
HDD 320 GB, 5400 rpm,
Even know that this laptop is made for W Vista, I used W7 for 2 years and it was running great.
Please help.
Thanks for response

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HHActiveX.dll - Windows Explorer open folders in separate window (Win7/ Vista)

Windows Explorer will open folders in a separate window when you double click them.
Adobe RoboHelp HTML 8 with update 1 and 2 installed sequentially on Windows XP.
HHActiveX.dll 8.0.0.203 registered by installer
Problem:
What we're seeing is, after installing HHActiveX.dll with our product suite on a 32-bit Windows 7 system (and probably Vista also), after rebooting the computer, Windows Explorer will open folders in a separate window when you double click them. This occurs even when Windows Explorer is set to open them in the same window.
Solution:
This seems to have something to do with the registration of actxprxy.dll and/or ieproxy.dll. Reregistering these DLLs and rebooting usually fixes this problem.
This web article mentions side effects in Internet Explorer and a couple of other programs that also come from this.
Here's a web page that outlines what we're seeing and how to fix it manually:
http://www.davidmoore.info/2009/08/19/solution-explorer-open-each-folder-in-same-window-er ror-and-sql-management-studio-ie-and-team-explorer-errors/
In Windows 7 (and probably Vista also), the GUID of this library has changed from {B8DA6310-E19B-11D0-933C-00A0C90DCAA9} to {C90250F3-4D7D-4991-9B69-A5C5BC1C2AE6}. Also, the registry entries that are concerned with actxprxy.dll are under HKCR\CLSID\{B8DA6310-E19B-11D0-933C-00A0C90DCAA9}; the last component in that registry path is the old GUID, and that's probably what is causing the problem.
Questions:
The previous approach provides a way to fix the problem by adding some code to reregister the two DLLs at the end of the install. The developer would prefer not to have to add install code to fix this problem in the first place.
1) Is this a known issue with Adobe HHActiveX.dll and Windows 7 / Vista? (I didn't find much with a web search or in Adobe Forums.)
2) Is a newer HHActiveX.dll available to fix this issue?
3) Does Adobe have a fix for the Windows Explorer problem that this DLL is causing in Windows 7 (and probably Vista also).
4) Any suggestions?
Thanks

Hi,
Here is what the developer did to fix the issue.
MSI Install: The installer is unregistering actxprxy.dll and ieproxy.dll on Windows 7 32-bit PCs
Problem: The problem was being caused by Adobe's HHActiveX.dll, a DLL that we have to install because of the browse sequences/ glossary in the new application help. This DLL was registering itself against actxprxy.dll using the GUID that was in use prior to Vista; and that in turn caused the Windows Explorer problem, among others.
Fix: Added a custom action that is called after the application is installed (or reinstalled or upgraded) that reregisters the 32-bit actxprxy.dll and ieproxy.dll. (Since the problem doesn't manifest itself on 64-bit systems, the custom action leaves the 64-bit actxprxy.dll and ieproxy.dll as they are.) Rolled back the registry deletions that were done in the Shared - help third party merge module in the previous attempt to fix this bug, as those changes were found to be unnecessary.
Cheers

Thunderbird runs very slowly after latest round of 11 updates from Microsoft, restoring computer to earlier date fixes problem.

Thunderbird version 24.4.0
Windows 7 Professional Service Pack 1
Microsoft uploaded 11 new updates ( 7 updates for Windows 7 and 4 for Office 2010) on 9 April 2014. After automatically installing updates on my computer Thunderbird runs very slowly, i.e., every time anything is selected, Thunderbird give error "Thunderbird fails to response" which takes about 1 minute to clear. I restored computer to earlier date that did not have these updates and Thunderbird works OK.
Also updates changed default search engine in Firefox 28.0 from Google to Bing ! ! !
Marti Sarigul-Klijn, Ph.D.

Appears that you are right.
McAfee was running a scan continuously. I uninstalled it. Then ran all of the Microsoft updates. Finally I reinstalled McAfee and turned off real time scanning of e-mail.
Thunderbird appears to be working OK now.
Thanks for your help.
Marti

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and conver

After reinstalling CS6 the bridge photo downloader isn't able to read raw files and fails to convert the raw files to DNG. Previously downloaded raw files, now DNG, open up successfully in Camera Raw 7. How do I get the photo downloader to read and convert raw files. MacBook Pro with Snow Leopard. No such problem before this reinstallation.

You should install Camera Raw 4.6.
Visit this page and follow the instructions carefully:
PC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4039
-Noel

After reinstalling Yosemite 10.10.2 Bridge opens folders very slowly.

Similar Messages

Maybe you are looking for