After Release material in PR not create new line item material
Hi friends
I m facing a problem in PR . When PR is Release then not add new line item in existing PR. It have any solution .
pls give the solution .
thanks .
Anup .
Hi,
Go to ME54N > Here reverse Release of PR and then add the new line item and then release it again.
OR if you don't want to do as above then Go to SPRO > MM > Purchase Requisition > Release Procedure > Procedure with Classification > Set Up Procedure with Classification > Release indicator > Here for Release indicator "2" (RFQ/purchase order), if you have entered Changeabil. as "1" then change it to "4"
Also check if you have assigned a Field Selection Key as only Display PR then you have to change it or remove it.
Similar Messages
-
Reconfigure sales BOM deletes line item and creates new line item
We are having issue with Sales BOM. Once sales BOM is reconfigure, line item is automatically deleted and creates new line item. These changes are not captured by reporting tool. Is it standard SAP behavior? if its not standard behavior, how to fix this issue?
Hi,
If i am not wrong, i assume you are using site instead of plant. If it is plant , then "yes", we can have a order with same material being line item 10 and 20 with different plants. Reg delivery, if the plants are configured to a same shipping point then you will have one delievery. if the plants are configured for a different shipping point , then delivery will be split up.
Reward if it helps,
Thanks & regards,
CLN -
Create new line item while saving a new order
I have a requirement to create a new line item with different item category while creating an order.
i.e
if the item category is ICT1, then create a new line item like item 1 but with item category ICT2.
Also in the conditions tab, we need to update the condition type with different values for both existing and new item.
All this has to be in VA01 i.e on save.
I tried to append lines of structure XVBAP at SAVE_DOCUMENT _PREPARE by changing the item no and item caegory. This works fine. But, how can I get other table details like XKOMV(which stores pricing condition details) for the new item?
Please can you suggest any other exit/subroutine for this?
or any other alternative solutionsHi,
Try to use this EXIT:
'EXIT_SAPMM06E_013' Update Customer's Own Data in Purchasing Document
The Badi and exit contains same parameter.
Thanks,
AMS -
Substitution to create new line item
Hi,
I am looking for a way of creating an additional line item when posting an FI document (incoming payment) based on one of the documents actual line items.
(well, actually the customer is looking for this...) ;o)
Something like:
IF line item account number EQ 1234 THEN
Check how many invoices are paid by this transaction
Check something in SD via the invoice number for all line items
Based on findings, create a new line item.
END IF.
Can I do this via a substitution and user exit?
Did anyone ever do something like this?
Thanks in advance!
DirkHi,
Good evening and greetings,
I dont think it is possible through substitution...Please go through the following
FBICRC002POPULATE_LINEITEMS
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan -
How to create new line item in credit memo request in rebate settlement
HI friends,
I need aimmediate help on following.
Requirenment is for given agreement all invoices for that needs to be retrieved. In those invoices we need to check the tax code or tax city for all invoices. If all are same then do nothing.
But if any of these 2 fields are different in all retrieved invoices, then we need to sum up the qty for all invoices having same tax code/city & like wise ned to create a credit memo request which will have one line item for each tax code/city.
Example:
Agreement 9999 with the relevant sales volume:
Invoice 1: Material A, tax key X, quantity 1 kg
Invoice 2: Material B, tax key X, quantity 2 kg
Invioce 3: Material C, tax key Z, quantity 4 kg
The credit memo request for agreement 9999 should look as such:
Thanks & regards,
Abhijeet.
Item line 1: SETTLEMENT MATERIAL, tax key X, 3 kg
Item line 2: SETTLEMENT MATERIAL, tax key Z, 4 kg
Please help me . I am not getting the user exit / badi for this development.
Please let me know if any one of you know from where to do this?Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay -
AO Create new line items/new data records
Hello,
I´m looking for a feature to create new data records for a planning query in AO.
I know this worked for BExAnalyzer, but can´t find any documentation for AO.
Would be great if anyone can help me out
Best Regards,
SandraHi Thorsten,
the planning query I use is using characteristic relationships. There are no free characteristics.
All characteristics are somehow derived by relationship or restricted with single values via variables.
I tried to define the planning kpi as no disaggregation, but even though it doesn´t work.
The query is ready for input and I can enter, recalculate and save the data.
But I got the kpi in the rows and as soon as I drag the key figure into the columns it is working.
Thanks
Sandra -
How to Reject Quotation line item and update New line item
Hi all,
I have a doubt in Quotation Rejection,Here it goes....
For VC implementation,We are Creating a quotation with Dummy Material,and after Creating Material Masters we have to update the Newly created material back in Quotation for same quotation number and after this the dummy material i.e the previous line item should be rejected with reason as a duplicate(reason code 23)..
So Pls help me in Rejecting the line item of quotation.how this is done.
Reply soon.
Thanks in Advance,
Balaji MedaHi,
The requirement is also to Update the Quotation with the newly created material.
So we need a Bapi or a function module which does 2 things:
1. Reject the previous Line item with a reason code.
2. Update the Quoation with the new material and insert a a new line item.
Thanks,
Balaji. -
Adding new line item while save
Hi all,
use an implementation of BADI ME_PROCESS_REQ_CUST in the MM-Purchase-Requisition, method IF_EX_ME_PROCESS_REQ_CUST~POST while save.
based on the line items available(USER ENTERED) i have to add few more line items based on the account assignment category and quantity while save.
How to create new line items (copying the existing line item and change the quantity ) and save the requestion with the additional line items. I used this code. while calling the method CRETE_ITEM create based on the object REF_ITEM in the MY_STATE.
the REF_ITEM object is Initial . so while creation the empty object is created.
kindly help to give tips/details to handle.
Coding:
data: l_item_list TYPE MMPUR_REQUISITION_ITEMS,
l_item TYPE MMPUR_REQUISITION_ITEM,
l_item_akt TYPE mereq_item,
l_item_ref TYPE ref to IF_PURCHASE_REQUISITION_ITEM.
l_item_list = im_header->get_items().
loop at l_item_list into l_item.
l_item_akt = l_item-item->get_data( ).
IF l_item_akt-MENGE > 1 AND
l_item_akt -KNTTP = 'A'.
DO l_item_akt -MENGE TIMES.
l_item-item= IM_HEADER->CREATE_ITEM( IM_ITEM = l_item-item).
INSERT l_item INTO TABLE IT_ITEMS_list.
%%%%% here i checked useing get data method i am not getting any data other than relesing procedure data.
I used SET_DATA method to set the data. even I am not getting data.
endloop.
(Debugging the code, I manage by doubleclicking while create Item method the fieldcontent of l_item (e.g ) to show the content of the class-attribute my_state. This works only if the field Interface in the Debugger is empty because then I see the attributes of the class. If the field Interface is filled with IF_PURCHASE_REQUISITION_ITEM, there arent any attributes shown.)
Thanks in advance for your kind help!!
NicoleI searched sdn and found this not possible.
-
I had used Iphone4 to update to ios 7.0.4(11B554a) but after update whenever I want to create new contact, I can't type in the word because the keypad don't appear, what should I do? Can I uninstall the update of ios 7.0.4?
You cannot uninstall the update. Apple does not support downgrading. What troubleshooting have you done? Start with a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot. Are you syncing contacts with iCloud?
-
Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)
The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie -
What is procedure for creating new vendor and material master data in ABAP
What is procedure for creating new vendor and material master data in ABAP .
see below code which is used for creation of vendor master as well as extension...
*& Report ZFC_VENDOR_CREATE *
REPORT ZFC_VENDOR_CREATE LINE-SIZE 100
NO STANDARD PAGE HEADING
MESSAGE-ID ZZ.
TABLES
TABLES : SSCRFIELDS. " Fields on selection screens
CONSTANTS
DATA : C_SPLIT TYPE C VALUE '#'. " Used for Has Separator in GUI_UPLAOD
TYPES
Int'table to hold Vendor Master Data
TYPES : BEGIN OF TY_VENDOR_MASTER,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
ANRED TYPE ANRED, " Title
NAME1 TYPE NAME1_GP, " Name1
NAME2 TYPE NAME2_GP, " Name2
SORTL TYPE SORTL, " Search Term 1
SORT2 TYPE AD_SORT2UL, " Search Term 2
STRAS TYPE STRAS_GP, " Street
PSTLZ TYPE PSTLZ, " Postal Code
ORT01 TYPE ORT01_GP, " City
REGIO TYPE REGIO, " Region
LAND1 TYPE LAND1_GP, " Country
SPRAS TYPE SPRAS, " Language
VBUND TYPE RASSC, " Trading Partner
BANKS TYPE BANKS, " Country
BANKL TYPE BANKK, " Bank Key
BANKN TYPE BANKN, " Bank Account
BKONT TYPE BKONT, " Bank Control Key
BANKA TYPE BANKA, " Name of Bank
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_MASTER,
Int'table to hold Vendor Extend Data
BEGIN OF TY_VENDOR_EXTEND,
FLAG TYPE C, " Update Flag
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
KTOKK TYPE KTOKK, " Account Group
REF_LIFNR TYPE LIFNR, " Reference Vendor Number
REF_BUKRS TYPE BUKRS, " Reference Company Code
AKONT TYPE AKONT, " Reconciliation Account
FDGRV TYPE FDGRV, " Cash Management Group
ZTERM TYPE DZTERM, " Payment Terms
REPRF TYPE REPRF, " Check Double Invoice
ZWELS TYPE DZWELS, " Payment Methods
XPORE TYPE XPORE, " Pay all items separately
END OF TY_VENDOR_EXTEND,
Int'table to hold Error Records Data
BEGIN OF TY_ERROR,
MSG(200) TYPE C, " To hold Message
LIFNR TYPE LIFNR, " Vendor Number
BUKRS TYPE BUKRS, " Company Code
END OF TY_ERROR.
DATA (Simple Fields)
DATA : W_COUNT TYPE I, " Variable to hold count of Records
W_SUCC_REC TYPE I, " No. of Success Records
W_SUCC_REC1 TYPE I, " No. of Updated Records
W_ERR_REC TYPE I, " No. of Error Records
w_noupdate_rec type i. " No. of Records not Changed
INTERNAL TABLES
Int'table to hold uploaded data from File
DATA : IT_VENDOR_MASTER TYPE STANDARD TABLE OF TY_VENDOR_MASTER,
WA_IT_VENDOR_MASTER TYPE TY_VENDOR_MASTER,
IT_VENDOR_EXTEND TYPE STANDARD TABLE OF TY_VENDOR_EXTEND,
WA_IT_VENDOR_EXTEND TYPE TY_VENDOR_EXTEND,
WA_IT_BDCDATA TYPE BDCDATA,
IT_BDCDATA TYPE STANDARD TABLE OF BDCDATA,
WA_IT_MESSTAB TYPE BDCMSGCOLL,
IT_MESSTAB TYPE STANDARD TABLE OF BDCMSGCOLL,
IT_ERROR TYPE STANDARD TABLE OF TY_ERROR,
WA_IT_ERROR TYPE TY_ERROR,
it_error_fk01 type standard table of ty_error,
wa_it_error_fk01 type ty_error,
it_error_fk02 type standard table of ty_error,
wa_it_error_fk02 type ty_error,
it_succ_rec1 type standard table of ty_error,
wa_it_succ_rec1 type ty_error,
it_noupdate type standard table of ty_error,
wa_it_noupdate type ty_error.
FLAGS
DATA : FL_FLAG1 TYPE C, " Flag to check error upload file
FL_FLAG2 TYPE C, " Flag to hold value
FL_FLAG3 TYPE C, " Flag to hold value
FL_FLAG4 TYPE C. " Flag to hold value
SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-001,
POSITION POS_LOW.
PARAMETERS : P_FILE(128) DEFAULT 'C:\UPLOAD.TXT' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-002,
POSITION POS_LOW.
PARAMETERS : P_VENMAS RADIOBUTTON GROUP R1 DEFAULT 'X'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-003,
POSITION POS_LOW.
PARAMETERS : P_VENEXT RADIOBUTTON GROUP R1.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-004,
POSITION POS_LOW.
PARAMETERS : P_MODE(1) DEFAULT 'N'.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-005,
POSITION POS_LOW.
PARAMETERS : P_GROUP(12) DEFAULT 'ZFC_VENDOR_C' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
COMMENT 1(30) TEXT-016,
POSITION POS_LOW.
PARAMETERS : P_GROUP1(12) DEFAULT 'ZFC_VENDOR_U' OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
Form to get file path for upload of data
PERFORM GET_FILE_PATH.
AT SELECTION-SCREEN ON BLOCK B1.
Form to Validate data specified on Selection Screen
CHECK SSCRFIELDS-UCOMM EQ 'ONLI'.
PERFORM VALIDATE_DATA.
START - OF - SELECTION
START-OF-SELECTION.
IF P_VENMAS = 'X'.
Form to upload data from Presentation Server for Vendor Master
PERFORM UPLOAD_DATA TABLES IT_VENDOR_MASTER.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_MASTER BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_MASTER WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM INSERT_VENDOR_MASTER_DATA.
ENDIF.
ELSEIF P_VENEXT = 'X'.
Form to upload data from Presentation Server for Vendor Extend
PERFORM UPLOAD_DATA TABLES IT_VENDOR_EXTEND.
IF FL_FLAG1 NE 'X'.
SORT IT_VENDOR_EXTEND BY LIFNR BUKRS KTOKK.
DELETE IT_VENDOR_EXTEND WHERE LIFNR = ' '
AND BUKRS = ' '
AND KTOKK = ' '.
Form to process data for Vendor Master
PERFORM CHK_AND_INS_VENDOR_EXTEND_DATA.
ENDIF.
ENDIF.
END - OF - SELECTION
END-OF-SELECTION.
IF FL_FLAG1 NE 'X'.
FORMAT COLOR 7.
WRITE:/2 TEXT-O01. " Total Number of records read :
FORMAT COLOR OFF.
WRITE:40 W_COUNT.
FORMAT COLOR 7.
WRITE:/2 TEXT-O02. " Total Number of Success records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O07. " Total Number of Updated records :
FORMAT COLOR OFF.
WRITE:40 W_SUCC_REC1.
FORMAT COLOR 7.
WRITE:/2 TEXT-O08. " Total Number of Unchanged records :
FORMAT COLOR OFF.
WRITE:40 W_noupdate_REC.
FORMAT COLOR 7.
WRITE:/2 TEXT-O03. " Total Number of Error records :
FORMAT COLOR OFF.
WRITE:40 W_ERR_REC.
if not it_succ_rec1 is initial.
skip 1.
perform display_changed_report.
endif.
if not it_noupdate is initial.
skip 1.
perform display_nochange_report.
endif.
IF NOT IT_ERROR IS INITIAL.
SKIP 3.
Form to display error data
PERFORM DISPLAY_ERROR_REPORT.
ENDIF.
IF FL_FLAG2 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O04. " BDC Session Name for Creation (FK01) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP.
perform display_error_report_fk01.
ENDIF.
IF FL_FLAG3 = 'X'.
SKIP 2.
FORMAT COLOR 4.
WRITE:/2 TEXT-O09. " BDC Session Name for Updation (FK02) :
FORMAT COLOR OFF.
WRITE:40 P_GROUP1.
perform display_error_report_fk02.
ENDIF.
ENDIF.
*& Form GET_FILE_PATH
This form is used to get the specified path for uploading of data from
flat file with the help of F4 function key
FORM GET_FILE_PATH .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = P_FILE.
ENDFORM. " GET_FILE_PATH
*& Form VALIDATE_DATA
This form is used to validate the data given by user on the Selection
Screen and the appropriate message is been displayed when an wrong
entry is inputted
FORM VALIDATE_DATA .
IF SY-BATCH EQ 'X'.
CLEAR SSCRFIELDS-UCOMM.
MESSAGE E001(ZZ) WITH TEXT-011.
" Excel file not to be used in Batch Mode
ENDIF.
IF P_MODE NE 'A' AND P_MODE NE 'N' AND P_MODE NE 'E'.
MESSAGE E001(ZZ) WITH TEXT-012.
" Session Mode should be either A or N or E
ENDIF.
ENDFORM. " VALIDATE_DATA
*& Form UPLOAD_DATA
This form is used to upload data from Presentation Server for either
Vendor Master or Vendor Extend
FORM UPLOAD_DATA TABLES P_IT_VENDOR.
DATA : L_FILENAME TYPE STRING,
L_FILETYPE TYPE CHAR10 VALUE 'ASC',
L_HEADER_LENGTH TYPE I VALUE 0,
L_READ_BY_LINE TYPE CHAR01 VALUE 'X'.
MOVE P_FILE TO L_FILENAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENAME
FILETYPE = L_FILETYPE
HEADER_LENGTH = L_HEADER_LENGTH
READ_BY_LINE = L_READ_BY_LINE
HAS_FIELD_SEPARATOR = C_SPLIT
TABLES
DATA_TAB = P_IT_VENDOR
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE I001(ZZ) WITH TEXT-006 L_FILENAME.
MESSAGE ID SY-MSGID TYPE 'I' NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
FL_FLAG1 = 'X'.
ELSEIF P_IT_VENDOR[] IS INITIAL.
MESSAGE I001(ZZ) WITH TEXT-014. " Uploaded File contains no data
FL_FLAG1 = 'X'.
ENDIF.
ENDFORM. " UPLOAD_DATA
*& Form INSERT_VENDOR_MASTER_DATA
This form is used to process BDC data for Vendor Master
FORM INSERT_VENDOR_MASTER_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR.
sort it_vendor_master by flag.
LOOP AT IT_VENDOR_MASTER INTO WA_IT_VENDOR_MASTER.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-LIFNR.
if wa_it_vendor_master-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_MASTER-LIFNR
AND BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION.
ENDIF.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_MASTER.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_MASTER.
elseif wa_it_vendor_master-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
WA_IT_noupdate-MSG = TEXT-018.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_MASTER.
endif.
ENDLOOP.
IF FL_FLAG3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " INSERT_VENDOR_MASTER_DATA
*& Form POPULATE_BDC_DATA_VEN_MASTER
This form is used to populate BDC data of Vendor Master
FORM POPULATE_BDC_DATA_VEN_MASTER .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_MASTER-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_MASTER-ZTERM.
IF WA_IT_VENDOR_MASTER-REPRF = 'Y'.
WA_IT_VENDOR_MASTER-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_MASTER-XPORE = 'Y'.
WA_IT_VENDOR_MASTER-XPORE = 'X'.
ENDIF.
if wa_it_vendor_master-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_MASTER-KTOKK,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_master-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_MASTER-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_MASTER-BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '=MALL',
BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-D0110' 'X',
BDC_FIELD USING 'RF02K-D0120' 'X',
BDC_FIELD USING 'RF02K-D0130' 'X',
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'RF02K-D0220' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0110',
BDC_FIELD USING 'LFA1-ANRED' WA_IT_VENDOR_MASTER-ANRED,
BDC_FIELD USING 'LFA1-NAME1' WA_IT_VENDOR_MASTER-NAME1,
BDC_FIELD USING 'LFA1-NAME2' WA_IT_VENDOR_MASTER-NAME2,
BDC_FIELD USING 'LFA1-SORTL' WA_IT_VENDOR_MASTER-SORTL,
BDC_FIELD USING 'LFA1-STRAS' WA_IT_VENDOR_MASTER-STRAS,
BDC_FIELD USING 'LFA1-ORT01' WA_IT_VENDOR_MASTER-ORT01,
BDC_FIELD USING 'LFA1-PSTLZ' WA_IT_VENDOR_MASTER-PSTLZ,
BDC_FIELD USING 'LFA1-LAND1' WA_IT_VENDOR_MASTER-LAND1,
BDC_FIELD USING 'LFA1-REGIO' WA_IT_VENDOR_MASTER-REGIO,
BDC_FIELD USING 'LFA1-SPRAS' WA_IT_VENDOR_MASTER-SPRAS,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0120',
BDC_FIELD USING 'LFA1-VBUND' WA_IT_VENDOR_MASTER-VBUND,
BDC_FIELD USING 'BDC_OKCODE' '/00',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'LFBK-BANKS(01)' WA_IT_VENDOR_MASTER-BANKS,
BDC_FIELD USING 'LFBK-BANKL(01)' WA_IT_VENDOR_MASTER-BANKL,
BDC_FIELD USING 'LFBK-BANKN(01)' WA_IT_VENDOR_MASTER-BANKN,
BDC_FIELD USING 'BDC_OKCODE' '=BANK',
BDC_DYNPRO USING 'SAPLBANK' '0100',
BDC_FIELD USING 'BNKA-BANKA' WA_IT_VENDOR_MASTER-BANKA,
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0130',
BDC_FIELD USING 'BDC_OKCODE' '=ENTR',
BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_MASTER-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_MASTER-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_MASTER-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_MASTER-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_MASTER-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_MASTER-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_MASTER
*& Form BDC_DYNPRO
This form is used to move data to BDCDATA int'table
FORM BDC_DYNPRO USING PROGRAM TYPE BDC_PROG
DYNPRO TYPE BDC_DYNR.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-PROGRAM = PROGRAM.
WA_IT_BDCDATA-DYNPRO = DYNPRO.
WA_IT_BDCDATA-DYNBEGIN = 'X'.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
This form is used to move data to BDCDATA int'table
FORM BDC_FIELD USING FNAM TYPE ANY
FVAL TYPE ANY.
CLEAR WA_IT_BDCDATA.
WA_IT_BDCDATA-FNAM = FNAM.
WA_IT_BDCDATA-FVAL = FVAL.
APPEND WA_IT_BDCDATA TO IT_BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CALL_TRANSACTION
This form is used to Call FK01 for processing of data either for
Vendor Master or Vendor Extend. The error records are inserted to
Session which can be processed using SM35
FORM CALL_TRANSACTION .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC = W_SUCC_REC + 1.
ELSE.
IF FL_FLAG2 NE 'X'.
PERFORM OPEN_BDC_SESSION.
FL_FLAG2 = 'X'.
ENDIF.
PERFORM BDC_INSERT.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA.
ENDIF.
ENDFORM. " CALL_TRANSACTION
*& Form OPEN_BDC_SESSION
Form used to open session for Error out Records
FORM OPEN_BDC_SESSION .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
ENDFORM. " OPEN_BDC_SESSION
*& Form BDC_INSERT
This form is used to insert error records to a Session method
FORM BDC_INSERT .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK01'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
ENDFORM. " BDC_INSERT
*& Form ERROR_RECORD_DATA
This form is used to process the messages for the error records which
will be displayed on the output report
FORM ERROR_RECORD_DATA .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk01-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk01-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk01-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk01 TO IT_ERROR_fk01.
CLEAR WA_IT_ERROR_fk01.
ENDIF.
ENDFORM. " ERROR_RECORD_DATA
*& Form CLOSE_BDC_SESSION
Form used to close session of the Error Records
FORM CLOSE_BDC_SESSION .
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-010. " Unable to Close BDC Session
ENDIF.
ENDFORM. " CLOSE_BDC_SESSION
*& Form CHK_AND_INS_VENDOR_EXTEND_DATA
This form is used to process BDC data for Vendor Extend
FORM CHK_AND_INS_VENDOR_EXTEND_DATA .
DATA : L_LIFNR TYPE LIFNR.
CLEAR : L_LIFNR, fl_flag4.
sort it_vendor_extend by flag.
LOOP AT IT_VENDOR_EXTEND INTO WA_IT_VENDOR_EXTEND.
W_COUNT = W_COUNT + 1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-REF_LIFNR.
if wa_it_vendor_extend-flag = 'A'.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
IF SY-SUBRC NE 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-REF_LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-REF_BUKRS.
WA_IT_ERROR-MSG = TEXT-007.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-LIFNR
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-LIFNR.
SELECT SINGLE LIFNR
FROM LFB1
INTO L_LIFNR
WHERE LIFNR = WA_IT_VENDOR_EXTEND-LIFNR
AND BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
IF SY-SUBRC EQ 0.
WA_IT_ERROR-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
WA_IT_ERROR-MSG = TEXT-015.
APPEND WA_IT_ERROR TO IT_ERROR.
W_ERR_REC = W_ERR_REC + 1.
CLEAR : WA_IT_ERROR, L_LIFNR.
ELSE.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_EXTEND.
PERFORM CALL_TRANSACTION.
ENDIF.
ENDIF.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'C'.
IF FL_FLAG2 = 'X' and fl_flag4 ne 'X'.
PERFORM CLOSE_BDC_SESSION.
fl_flag4 = 'X'.
ENDIF.
REFRESH IT_BDCDATA.
CLEAR IT_BDCDATA.
PERFORM POPULATE_BDC_DATA_VEN_extend.
PERFORM CALL_TRANSACTION_FK02.
CLEAR : WA_IT_VENDOR_EXTEND.
elseif wa_it_vendor_extend-flag = 'N'.
WA_IT_noupdate-LIFNR = WA_IT_VENDOR_extend-LIFNR.
WA_IT_noupdate-BUKRS = WA_IT_VENDOR_extend-BUKRS.
WA_IT_noupdate-MSG = TEXT-019.
APPEND WA_IT_noupdate TO IT_noupdate.
W_noupdate_REC = W_noupdate_REC + 1.
CLEAR : WA_IT_noupdate, WA_IT_VENDOR_EXTEND.
endif.
ENDLOOP.
IF FL_FLAG2 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
if fl_flag3 = 'X'.
PERFORM CLOSE_BDC_SESSION.
ENDIF.
ENDFORM. " CHK_AND_INS_VENDOR_EXTEND_DATA
*& Form POPULATE_BDC_DATA_VEN_EXTEND
This form is used to populate BDC data of Vendor Extend
FORM POPULATE_BDC_DATA_VEN_EXTEND .
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = WA_IT_VENDOR_EXTEND-ZTERM
IMPORTING
OUTPUT = WA_IT_VENDOR_EXTEND-ZTERM.
IF WA_IT_VENDOR_EXTEND-REPRF = 'Y'.
WA_IT_VENDOR_EXTEND-REPRF = 'X'.
ENDIF.
IF WA_IT_VENDOR_extend-XPORE = 'Y'.
WA_IT_VENDOR_extend-XPORE = 'X'.
ENDIF.
if wa_it_vendor_extend-flag = 'A'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0105',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_EXTEND-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_EXTEND-BUKRS,
BDC_FIELD USING 'RF02K-KTOKK' WA_IT_VENDOR_EXTEND-KTOKK,
BDC_FIELD USING 'RF02K-REF_LIFNR'
WA_IT_VENDOR_EXTEND-REF_LIFNR,
BDC_FIELD USING 'RF02K-REF_BUKRS'
WA_IT_VENDOR_EXTEND-REF_BUKRS,
BDC_FIELD USING 'BDC_OKCODE' '/00'.
elseif wa_it_vendor_extend-flag = 'C'.
PERFORM :BDC_DYNPRO USING 'SAPMF02K' '0106',
BDC_FIELD USING 'RF02K-LIFNR' WA_IT_VENDOR_extend-LIFNR,
BDC_FIELD USING 'RF02K-BUKRS' WA_IT_VENDOR_extend-BUKRS,
BDC_FIELD USING 'RF02K-D0210' 'X',
BDC_FIELD USING 'RF02K-D0215' 'X',
BDC_FIELD USING 'BDC_OKCODE' '/00'.
endif.
perform :BDC_DYNPRO USING 'SAPMF02K' '0210',
BDC_FIELD USING 'LFB1-AKONT' WA_IT_VENDOR_EXTEND-AKONT,
BDC_FIELD USING 'LFB1-FDGRV' WA_IT_VENDOR_EXTEND-FDGRV,
BDC_FIELD USING 'BDC_OKCODE' '=/00',
BDC_DYNPRO USING 'SAPMF02K' '0215',
BDC_FIELD USING 'LFB1-ZTERM' WA_IT_VENDOR_EXTEND-ZTERM,
BDC_FIELD USING 'LFB1-REPRF' WA_IT_VENDOR_EXTEND-REPRF,
BDC_FIELD USING 'LFB1-ZWELS' WA_IT_VENDOR_EXTEND-ZWELS,
BDC_FIELD USING 'LFB1-XPORE' WA_IT_VENDOR_extend-XPORE,
BDC_FIELD USING 'BDC_OKCODE' '=UPDA'.
ENDFORM. " POPULATE_BDC_DATA_VEN_EXTEND
*& Form DISPLAY_ERROR_REPORT
This form is used to display the error records on the output screen
FORM DISPLAY_ERROR_REPORT .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H03, " Error Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR INTO WA_IT_ERROR.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
ENDFORM. " DISPLAY_ERROR_REPORT
*& Form CALL_TRANSACTION_FK02
Form used to Call Transaction FK02
form CALL_TRANSACTION_FK02 .
DATA : L_OPTION TYPE CTU_PARAMS,
L_SUBRC TYPE SYSUBRC.
REFRESH IT_MESSTAB.
CLEAR IT_MESSTAB.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK02'
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
L_SUBRC = SY-SUBRC.
IF L_SUBRC = 0.
W_SUCC_REC1 = W_SUCC_REC1 + 1.
WA_IT_succ_rec1-MSG = Text-017.
IF P_VENMAS = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_succ_rec1-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_succ_rec1-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_succ_rec1 TO IT_succ_rec1.
ELSE.
IF FL_FLAG3 NE 'X'.
PERFORM OPEN_BDC_SESSION_fk02.
FL_FLAG3 = 'X'.
ENDIF.
PERFORM BDC_INSERT_fk02.
W_ERR_REC = W_ERR_REC + 1.
PERFORM ERROR_RECORD_DATA1.
ENDIF.
endform. " CALL_TRANSACTION_FK02
*& Form OPEN_BDC_SESSION_fk02
Form used to Open session for FK02
form OPEN_BDC_SESSION_fk02 .
DATA : L_USERID TYPE APQ_MAPN, " Variable to hold user-id
L_GROUP TYPE APQ_GRPN. " Variable to hold value
MOVE P_GROUP1 TO L_GROUP.
MOVE SY-UNAME TO L_USERID.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
GROUP = L_GROUP
KEEP = SPACE
USER = L_USERID
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-008. " Unable to open BDC Session
ENDIF.
endform. " OPEN_BDC_SESSION_fk02
*& Form BDC_INSERT_fk02
Form used to insert data into BDC session using FK02
form BDC_INSERT_fk02 .
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
TABLES
DYNPROTAB = IT_BDCDATA
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7.
IF SY-SUBRC <> 0.
WRITE:/ TEXT-009. " Unable to Insert Data to BDC Session
ENDIF.
endform. " BDC_INSERT_fk02
*& Form display_changed_report
Form to display Updated Vendor data
form display_changed_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O10. " Updated List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O11. " Updated List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_succ_rec1 INTO WA_IT_succ_rec1.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_succ_rec1-LIFNR,
17 SY-VLINE,
18 WA_IT_succ_rec1-BUKRS,
31 SY-VLINE,
32 WA_IT_succ_rec1-MSG,
100 SY-VLINE.
CLEAR : WA_IT_succ_rec1.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_changed_report
*& Form display_nochange_report
Form to display No Changed data for Vendors
form display_nochange_report .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O12. " No Changes List for Vendor Master
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O13. " No Changes List for Vendor Master Extended
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_noupdate INTO WA_IT_noupdate.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_noupdate-LIFNR,
17 SY-VLINE,
18 WA_IT_noupdate-BUKRS,
31 SY-VLINE,
32 WA_IT_noupdate-MSG,
100 SY-VLINE.
CLEAR : WA_IT_noupdate.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_nochange_report
*& Form ERROR_RECORD_DATA1
Form to get Error Message for Changed Vendors
form ERROR_RECORD_DATA1 .
DATA : L_LINES TYPE I,
L_MSG(200) TYPE C.
DESCRIBE TABLE IT_MESSTAB LINES L_LINES.
READ TABLE IT_MESSTAB INTO WA_IT_MESSTAB INDEX L_LINES.
IF SY-SUBRC = 0.
CLEAR L_MSG.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = WA_IT_MESSTAB-MSGID
LANG = SY-LANGU
NO = WA_IT_MESSTAB-MSGNR
V1 = WA_IT_MESSTAB-MSGV1
V2 = WA_IT_MESSTAB-MSGV2
V3 = WA_IT_MESSTAB-MSGV3
V4 = WA_IT_MESSTAB-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC = 0.
WA_IT_ERROR_fk02-MSG = L_MSG.
ENDIF.
IF P_VENMAS = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_MASTER-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_MASTER-BUKRS.
ELSEIF P_VENEXT = 'X'.
WA_IT_ERROR_fk02-LIFNR = WA_IT_VENDOR_EXTEND-LIFNR.
WA_IT_ERROR_fk02-BUKRS = WA_IT_VENDOR_EXTEND-BUKRS.
ENDIF.
APPEND WA_IT_ERROR_fk02 TO IT_ERROR_fk02.
CLEAR WA_IT_ERROR_fk02.
ENDIF.
endform. " ERROR_RECORD_DATA1
*& Form display_error_report_fk01
Form to display Error Report for Master Vendors (FK01)
form display_error_report_fk01 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O05. " Error List for Vendor Master (FK01)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O06. " Error List for Vendor Master Extended (FK01)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number
17 SY-VLINE,
18 TEXT-H02, " Company Code
31 SY-VLINE,
32 TEXT-H04, " Message
100 SY-VLINE.
FORMAT COLOR OFF.
WRITE:/ SY-ULINE(100).
LOOP AT IT_ERROR_fk01 INTO WA_IT_ERROR_fk01.
FORMAT COLOR 2.
WRITE:/1 SY-VLINE,
2 WA_IT_ERROR_fk01-LIFNR,
17 SY-VLINE,
18 WA_IT_ERROR_fk01-BUKRS,
31 SY-VLINE,
32 WA_IT_ERROR_fk01-MSG,
100 SY-VLINE.
CLEAR : WA_IT_ERROR_fk01.
FORMAT COLOR OFF.
ENDLOOP.
WRITE:/ SY-ULINE(100).
endform. " display_error_report_fk01
*& Form display_error_report_fk02
Form to display Error Report for changed Vendors (FK02)
form display_error_report_fk02 .
IF P_VENMAS = 'X'.
WRITE:/ TEXT-O14. " Error List for Vendor Master (FK02)
ELSEIF P_VENEXT = 'X'.
WRITE:/ TEXT-O15. " Error List for Vendor Master Extended (FK02)
ENDIF.
WRITE:/ SY-ULINE(100).
FORMAT COLOR 1.
WRITE:/1 SY-VLINE,
2 TEXT-H01, " Vendor Number -
System should not creates new version when value of PO increased..
Hi Experts,
Need your help to solve this problem. When i increase value of PO it should retrigger Release strategy but it creates version first, then i have to tick completion indicator and check then only release strategy retriggers..
It should not create new version when change po
Please check below screenshot
Please helpHi
Please reveiw the following points in note
- 493900 FAQ: Release Strategy
4. Why is the release strategy not determined?
"If you use version management, the determination of the release
strategy starts when the version is completed.
You complete a version by setting the "version completed"
indicator in the version tab."
- 662993 Resetting an already occurred release
You edit a purchasing document with release strategy.
You change the quantity or the price. In spite of that, the
already set release is not reset.
The release strategy works the same with or without version management
active - the only difference in case - version management is active -
is that if release is to be reset, it will be reset only on version
I hope this helsp to clarify this issue
Kind regards,
Lorraine -
IDOC_INBOUND_ASYNCHRONOUS FM not creating new IDOC?
Hi,
IDOC_INBOUND_ASYNCHRONOUS function module is not creating new IDOC in SAP.
I configured all related functions against message type and idoc type.
Please let me know the issue.
I am processing old IDOC (created from non sap system) through BD87 and using custom function module. I called IDOC_INBOUND_ASYNCHRONOUS in custom function module.
ChandraHello,
Aren't you getting any error messages ? You may check by creating watch points on the message id and / or number .
Thanks -
Why i can't not create new database in oracle 10g express
why i can't not create new database in oracle 10g express?
should i use oracle 11g standard edition?
thanksIn Oracle a schema is what a 'database' is in Sqlserver.
And if you would have been aware about the limitations of XE, you would have known you can only create *1* (one) database using Oracle XE.
However, probably you don't need a new database at all, and a schema will suffice.
Sybrand Bakker
Senior Oracle DBA -
ORA-27142: could not create new process/ when i am duplicating DB
I am trying to duplicated DB on new server and getting this error
Need suggestions to solve this ?
RMAN-03002: failure of Duplicate Db command at 10/03/2006 16:58:58
RMAN-03015: error occurred in stored script Memory Script
ORA-27142: could not create new processcheck the availability of disk space where netbackup writes log files.
if its is all set,
open the netbackup log file and look for any recent relevant messages.
look closely in rmanlogs and netbackup logs for any messages ralating to DBMS_BACKUP_RESTORE.RESTOREBACKUPPIECE
Maybe you are looking for
-
Key password for the demonstration identity key
Anybody know the key password for the cert in the DemoIdentity keystore. I know the store passphrase but I can't find the key password documented anywhere on BEA's web site. Anybody know the private key password? Grant
-
Also, I changed my ID on one of the iTunes accounts on my MacBook Pro. However, when I go to download music or apps on my iPhone, the old account ID keeps popping up and i don't know how to get that to update the account ID- even after synching the
-
Free Oracle Tool to Simplify Commonly Run Dictionary Queries
(orastat has a very good 'Hot Blocks' query) Hi, My co-workers and I at Agilent Technologies have developed a useful tool to simplify running common dictionary queries. It runs on UX and requires that you be the "oracle" user. You can download it fro
-
Hi, I'm doing subtitles for my movie in Premiere CS5.5 but everytime I create a new title clip, I have to configure the letters all over again and put them in the bottom end, etc. Is there a way to create the next title cilp with the same settings as
-
Quicktime Pro VS Sorenson Squeeze which is better for uploading to YouTube?
I'm thinking of buying Quicktime Pro or Sorenson Squeeze - which is better for uploading to YouTube? Which would give my video better quality? Also, with regard to Sorenson Squeeze: The website says these are its requirements - could someone explain