After rendering a clip it plays back slow

For christmas i recived a gopro hero 3, since then i have been out to the beach filming with it.
The setting i filmed in is 48fps at 1080p
I first brought it straight into premiere cc and started to edit it, i noticed that some clips after rendering seemed to have slown down, but kept the same duration.
At first i thought it was because i was stablizing the clips, but only certian clips became slow, while others were fine.
I then downloaded the gopro program and converted the clips to avi files as apparently the gopro files straight from the camera arn't the best for playback and editing.
Even after converting the same clips slow down and i dont know why, i have looked around for a good few hours now and noone seems to know why its happening?
Is it because of the framerate i recorded in? i have had problems before with the sequence settign being right but for this i made the sequence from the clips so they are the same.
Im a regualr editor of dslr footage and all that is fine, its just when i start to edit gopro footage that it happens
Please could someone help

historically film cameras are 24 FPS ...and broadcast ( in the US ) is 30 FPS...so a lot of what happens in editing is sometimes related to that stuff...
If you shot at 48 FPS and showed it on a film projector ( which is 24 fps ) as " film " it would look twice as SLOW as normal footage shot at 24 FPS.
If you shot at 48 FPS and want it to look NORMAL than you would play it on a projector that actually projects at 48 FPS...and then it would normal.
See what I mean about the stuff being related ??
So if you shot 48 FPS and want it to look normal you can try " intrepret footage " settings...and there are others here who can help you more... I don't shoot overcranked and haven't done what you are trying to do .. but you should stipulate whether you want the motion you shot to look " normal " or slowed twice as much or what ... keeping in mind what I said above ...
hope that helps ?

Similar Messages

After rendering, my video is playing back the wrong size.

After rendering my sequence changed to 1440 x 1080 instead of 1920 x 1080. I am unable to change this in sequence settings. Help please?

"Creative Cloud with all the current updates" is not enough information; please report the exact version number displayed in the About Premiere Pro dialog. If it turns out that you're on 7.1, they you might be hitting the bug discussed in this thread: http://forums.adobe.com/message/5826830#5826830.
I'm not clear on what exactly the problem is. Is it that the video appears squeezed in the horizontal dimension during playback? Or did the sequence's dimensions actually get changed?
What are the Program Monitor's Zoom Level and Playback Resolution?
What are the sequence settings? (a screenshot of the Sequence Settings dialog would help.)
Do you have GPU acceleration enabled? If so, please try switching the Renderer to Software Only and see if the problem persists.

Captured clips are playing back at least TWICE as fast

Hey all- I am capturing HD footage from a JVC Pro HD camera - footage shot at 24P. Everything seems fine with the capture (except for the fact that there is no device control - only capture now), but when I play back the captured clips I hear the audio playing at normal speed but the video is playing back at leat at twice the speed - all actors are in FAST motion. I hear the crew and director speaking, getting ready to shoot as I watch the scene start and speed through and end right as the clip ends.
Any ideas? Is it a setting on the OUTPUT for the camera?
Thanks for any help.
Cayce

Neither Final Cut Express nor Final Cut Pro support
720p24 material. You need a product like HDVxDV to
bring it in.
Tom-
Thanks for getting back to me last night. You seem to be a master in these parts. I am new here. I am really a director and writer but through my production company I have done a number of things in FCP over the years, always without any problems. That is until the introduction of HD and 24p at which time I sort of started saying to our amazing editor "whatver you say" and clouding over with confusion. After I got your message I went and got FCP 5 from the Apple store in an attempt to keep my friend, whose short we were trying to edit, from crying. Once installed and running we had the same issue as we had in FCE HD - the video - in terms of quality - was captured perfectly, but the clips would play back at almost twice the speed that they should have. I tried virtually every easy set-up that pertained to HD and nothing worked. On a few of them I could get an actual Log and Capture window to come up but when I went to play the material via device control there was no image, althoug I could see TC running. A friend suggested that you have to take the captured HD 24p clip and bring it into the timeline and render it for it to work. Is that true? I tried it to no avail. So, he shot on JVC GY-HD 100 at 24p. I now have FCP 5 HD and am considering buying LUMIERE software that purports to streamline this very issue. Any thoughts or suggestions you may have for me would be greatly appreciated.
Thanks so much,
M Cayce Lindner

Program Monitor - I'm not seeing whole clip when playing back

I'm real worried! Having spent days of my life importing video and editing it - and then trying to fix my problem of only seeing a part of the playing-back clip in the program monitor which led me onto your site. I've spent hours looking at your posts (and indeed Adobe help pages) trying to solve this and clearly (I think!) my original sequence settings have been wrong. Maybe I can come back to that because I'm really not sure how to set these correctly. My initial question please, if I complete my editing and then export this file, will I still only see part of the clips in the final version, or will I see the whole of the original movie clip?
Some information:
- Windows 7
- Premiere Pro CS4
- Program Monitor setting is "Fit"
- 16:9 aspect ratio
- PAL (based in the UK)
- Sony HD camcorder - SR12E
- 1920 x 1080i HD
Phew, hope that's enough information for you to 'kick start' me!
Thank you.
Regards, Doreen.

Would you also be able to tell me if the Sequence Preset below is my correct preset for the future. Thanks.
- AVCHD
- 1080i
- AVCHD 1080i30 60i (Amamorphic)
Oh, it's like a new language!
Regards,
Doreen.

Record audio clip and play back it into media player

how can i record voice clip using java application and play back it with media player.

870902 wrote:
how can i record voice clip using java application and play back it with media player.1) Record from "javasound://0" using a Processor / DataSink
2) Play back the file from 1 using a Player

Music plays back slow once exported to another program.

How do I get it to play at normal speed? It plays fine in GarageBand but once exported to Adobe After Effects or Premiere Pro it plays way slower than the speed I had it set at in GarageBand. Any suggestions?

Well I ended up exporting the song to iTunes, finding the .aif file on my computer, importing it into adobe audition, then exporting it as a .wav and my audio sounded just fine! ... In case anyone comes across this issue!

After rendering clip is in slow motion

Hi,
I've been using Gopro shots, which were converted to AVI with Cineform, following the CS 6 issue:
Sequence setting, and clip rate: 1280x720, 100fps, avi. after the rendering the clip takes place in slow motion on the timeline.
Why is that?
If I use the same clip in the setting 1920x1080 60fps render remains the original speed, so it will not slow down.
Thanks, Alex.

The pc can handle the yellow line, but not some of the cross fades.
The clip plays in normal speed after exporting the 1280x720, 100fps.
It only slows down on the timeline.
Any solution or idea what the problem is?
i put it in 60fps sequence because it doesnt slow down after rendering.

Imported audo plays back too slow

I dragged and dropped a 48k wav file into GB and it played back slow. Is GB set to 44.1? Do I need to convert it 44.1k?

you have been SO HELPFUL ! thanks !! we need more people like you.
so you are saying i can render out an .flv file and just rename the extension to .swf ?? would this be a smaller file ? i cant seem to get the .swf file smaller than 56 megs out of after effects, the only way would be to make the actual size (600x336) smaller....but this would make the animation too small on the screen....and i like the size of it now. i will try the .flv thing tonight.
the firefox thing fixed itself. this morning when i tried it, it played the flash file. slowly and sluggishly, like safari, but it played it back. so maybe it had to update ? dont know....not sure. thanks again....and let me know about renaming the file...can i just change the extension ?
thanks a million!!
B

WAV files play back too fast

When I choose File->Open to open an AIFF, MP3 or other file in Audition CS6, it simply plays back at normal speed. However, when I open a WAV file, it plays back at double speed (voices become high-pitched). NOTE: The sample rate (44.1) and bit size settings match exactly. This is not a sample rate issue. The frame rate is NOT set to custom.
This happens only to WAV files. The platform Mac OS X 10.8.3. Any ideas?

For some reason the songs seem to play back faster than they should. Any ideas?
How much faster? Have you timed the playback speed with a stop watch and compared the actual duration with the duration (Time) in the browser?
If youtube plays back slower, it might be caused by the network.
I have only seen this on iTunes for Windows so far - you are not by any chance on Windows right now, are you?
Are you running the latest version of iTunes?
And do you have any non-standard Audio devices installed - look at System Preferences > Audio > Output ?
Did you install any Audio Drivers?
Also look at the Audio Devices in Audio MIDI setup (Applications > Utilities):
Check the Format for you output device if it is set to 441000 Hz (compare the setting to the sample rate you see on your songs in the iTunes Library).
If this setting is wrong, iTunes may try to playback at the wrong speed.
Regards
Léonie

Songs play back too fast

For some reason the songs seem to play back faster than they should. Any ideas?
I even went on youtube and played the songs simultaneoulsy and it isnt just one song it seems to be that my entire itune library plays back faster than it normally would. Any ideas at all?

For some reason the songs seem to play back faster than they should. Any ideas?
How much faster? Have you timed the playback speed with a stop watch and compared the actual duration with the duration (Time) in the browser?
If youtube plays back slower, it might be caused by the network.
I have only seen this on iTunes for Windows so far - you are not by any chance on Windows right now, are you?
Are you running the latest version of iTunes?
And do you have any non-standard Audio devices installed - look at System Preferences > Audio > Output ?
Did you install any Audio Drivers?
Also look at the Audio Devices in Audio MIDI setup (Applications > Utilities):
Check the Format for you output device if it is set to 441000 Hz (compare the setting to the sample rate you see on your songs in the iTunes Library).
If this setting is wrong, iTunes may try to playback at the wrong speed.
Regards
Léonie

FCP X viewer window plays back video with color errors

I am new to Final Cut X and Final Cut PRo in general. I am doing a project at work where I needed to learn FCPX.
I figured out a lot pretty fast. But one issue i am having is that all of the clips being played back in the viewer window are being played back with this weird color error. Its happens to movie clips, still photos and titles. See below, This is a screenshot of what it looks like. When I first installed FCP it wasn't doing this but now it started doing it all the time. Its annoying because I can't see the transitions properly, and sometimes video gets out of sync with audio.
I am running Lion 10.7.1 with a Mac Pro 2 x 2.8ghx Quad Core Xeon. 16GB RAM. Nothing special on the HD's but they are at 7200rpm.
I tried adjusting prefs for playback quality, I tried transcoding media. However, its doing this to a still frame jpeg as well, which should be giving the machine ay trouble. I feel like my machine should be able to keep up with FCPX.
EDIT: I also restarted my machine a bunch of times and killed all processes that weren't necessary for the machine to run and for FCP to be working. I also have an NVIDIA GeForce 8800 GT graphics card, which meets the requirements for FCP X.

I am also seeing the same issue. I have an Eizo Display and if I color correct with the i1 it behaves as above. It has been driving me crazy. If I switch back to standard profile it seems to work but my dislplay is not color calibrated. Is there a fix?

Audio doesn't play back through DAE audio tracks

I work on Digidesign HD hardware and Logic as a front end and a problem has crept in over the last week or so.
I will be working on a song and suddenly with no warning Logic freezes for about 30sec or so. After this all audio files playing back on DAE tracks will not playback or white noise plays back from those track. The DTDM tracks and instruments tracks work fine. This happens wether i have a couple of tracks on the go or loads. It's like the DAE audio playback side crashes but all other things still play back through the DAE so it half works.
PLEASE PLEASE help as i have to reboot Logic everytime and 10-20 mins later it happens all over again.
Thanx
G5 dual 2Gh Mac OS X (10.4.2)

Just some quick thoughts....I'm not a "techie", but have had my share of softwaretrouble!!
It could be that Logic is set to global 16bit - and you try to play back 24bit files. Had kind of same problem a year ago, but don't remember if it was Logic OR ProTools that gave this result (played for a while...then a burst of white noise). But the crash...no. This is probably caused by other components. It's usually a good thing to trash the Logic preference file and restart. Then check preferences>audio>drivers>DAE that the global bitrate is set as desired (according to your already recorded files). The DAE preferences don't contain that much information, but could be helpful to trash too. Just remember to set the playback buffersize to a reasonable amount for your setup.
Hope this will help.
G5 Dual 1.8 / 3GB RAM Mac OS X (10.4.6) Logic Pro 7.2/ProTools 7.1 HD2 Accel/192 IO

Dynamics audio effect glitchy. Audio plays back too softly.

PP 7.1.0
Mac OS X 10.8.4
Basic timeline. Three tracks of audio. One of the tracks is playing back VERY quietly. This track has a dynamics effect applied, with only the "limiter" function checked on (at -3db). Audio on this channel plays back too softly. A restart of premiere fixes the problem for a few moments, but then its back to soft again. Playing the clip in the source monitor plays it back at the correct volume. Turning the effect off altogether also plays the audio at the original (louder) volume - albeit minus the limiter. The waveform itself is plenty loud. But when the effect is engaged, the clip suddenly plays back about 15db quieter than it should.
Any ideas?

Hi T-MACK,
This may not be much help but I had the same problem. Inspection showed that I'd inadvertantly set the camera on long play when shooting the footage. It seemed fine when importing into imovie but playback appeared to be double speed. I posted a question on this forum but couldn't get a satisfactory solution. Re-setting the camera and reimporting didn't help. However, I borrowed a friends camcorder and reimported the same video from that. It worked. I can't see why but it did.
Perhaps sommeone will come up with a better answer.
Regards
Rob

Video clips won't play back after capture

I am a long-time user of Premiere Elements, currently using version 9.0. I am capturing video clips from the same videocamera that I've used in previous versions of PE. My video clips won't play back after I capture them. The clip is in my "media" area, but when I try to play it back, the audio plays but the picture remains frozen on the starting image. What is happening?

It is a Sony Handycam DCR-HC28, mini DV, using a firewire connection.
Operating System is Windows XP Pro, Service Pack 3, system specs are SATA 2 RAID 1 with dual 1 TB hard drives. 4 GB RAM. As far as how fast my processor is, I looked on my invoice and it says, "Intel Core2 processor Q6600 (2.4 Ghz, 1066 FSB) with Quad Core technology and 8 MB cache, 4 GB DDR2 SDRAM at 800 MHz.
I defragmented my hard drive before beginning and have 779 GB or 83 percent free space on hard drive.
I have not placed my video clips on the timeline yet so don't know if there is a red line on top, indicating it hasn't been rendered. I merely wanted to play back my clip to set "in" and "out" points. This has never happened before in my long history of using Premiere Elements. Would prefer not to have to go back to PE 8, as that was a disaster.

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created with a older mac os x (lion) and converted them to import into fce. after doing this as well as putting clips on the fce timeline when playing back t.h

My current os x is 10.9.5, using final cut express vers. 4.0.1. I have imported .mov clips created on a older mac os x (lion) and when I wanted to import them into fce, a quicktime conversion window opened up and converted them (I haven't experienced this in the past). I then imported the converted quicktime clips into my fce project. After doing this I took selected clips and put those edited clips on the fce timeline. When playing the video back in the fce timeline,I noticed
1) the video wasn't playing back smoothly like the original content
2) when looking at the timecode reading of the timeline, the timecode was sputtering as well as the video and audio. I exported to quicktime just to see if that was consistent, it was.
When I play the converted quicktime content independently of fce, it plays normally (no sputtering of timecode, video and audio. Need help to resolve the sputtering playback of converted video content in the fce timeline. I've never experienced this before. Any suggestions?

When you say you converted the clips before importing them into FCE, did you convert to AIC or DV and do the converted clips match your FCE Sequence settings exactly? If not, go back and convert the original files again, using the intended Sequence settings as a guide.
-DH

After rendering a clip it plays back slow

Similar Messages

Maybe you are looking for