After rendering, the play back is balck

I noticed in the past few months after rendering 10 sec or so its playing nothing but a black on my monitor. When I adjust the transparancy the clip is showing up again. And re-rendering solves the problem.
Please help.

Yas gotta give us more info. What version of fcp are you using, what version of qt, are you applying effects, if so which ones, what format are your clips, what format is your sequence?
What you're doing when you adjust the opacity is forcing a rerender. Try this, control click on a problem clip and choose remove attributes, choose nothing and hit OK. Does this have the same effect?

Similar Messages

  • After Effects rendering with Format MXF OP1a 1080i/25, XDCAM with colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is "30-217"

    Hello!
    I have a very annoying problem in After Effects. I'm making an Animation with the format "MXF OP1A, Codec XDCAMHD 50 PAL (4:2:2)" with 8-Bit and with the colour space "HDTV (Rec. 709) 16-235" but after rendering the colour space is not 16-235, it is 30-217 RGB. After I activate the colour space in After Effects, then it shows the right values, but after rendering the value for white is 217 and for black is 30. Hopefully someone can help me. Thanks in advance.
    Bye

    Thanks for your answer, but i don't know an Adobe Media Composer, you surely mean Adobe Media Encoder, or not? Anyway i do not find the option for colour space in Media Encoder, so i would be very thankful if you could tell me where to find it.

  • After rendering the video is blurry and pixelated.

    I have 70 + hours invested in this edit.  I recently rendered it for the first time and it became blurry and pixellated.  I published it to see if it would come out clear but it did not.  I found the tab for deteting rendered files and this seemed to help a little.  I published that one and it was a little less blurry but still poor quality.  How can I get the video back to the pre-render quality.  I am using Powerpoint slides saved as jpegs.  I did this in another video and the finished video was super clear, however, now after I rendered this one I am unable to get that same quality.

    cwrardin
    You need to supply more details than you have in order to get to the core of the issue.
    What version of Premiere Elements are you using and on what computer operating system is it running? What do your computer resources look like, installed and available RAM, total and free hard drive space, location and free space for the Scratch Disks?
    What are the properties of the source media that you are putting on the Timeline?
    Based on the properties of your source media, what is the project preset that you or the program are setting in the new project dialog?
    Video (video audio compression, frame size, frame rate, interlaced or progressive, file extension, duration, PAL vs NTSC, camera source, etc.)
    Photos (how many, what format, what pixel dimensions)
    What is your export choice and settings?
    Let us start here and then we can decide the troubleshooting strategy.
    Thank you.
    ATR

  • CS6 - Why is my rendered timeline playing back as black/white and flipped vertically?

    This doesn't make any sense. It only happens inside of the preview monitor in Premiere Pro CS6. When my footage isn't rendered yet, it plays back just fine, but when I go to render everything in the time line, it makes everything flipped vertically and black/white. When I export a render to a file, it's completely fine. This only happens in Premiere and not AE or Prelude.
    I'm using a PC, Windows 7 64-bit. My computer has quad-core i7 running at 3.8ghz, 16GB of RAM, and a 1GB GPU. I just upgraded from CS4, where I never had any of these issues in Premiere. Thanks!

    There have been other messages (not exactly like yours) indicating that CS6 is enough different that you will need to update your graphics card driver
    Do NOT let Windows update do this... go directly to the nVidia or ATI site and find the most recent driver for your (un-named) 1Gig GPU

  • I need to play back a video-recording i have taken myself and have it show the time count in seconds on the play back. Can you help?

    I need to play back a video-recording that I have taken myself and have it show the time counter in secs/minutes in the playback. Can anyone help?

    the movie editing app "Avid Studio" displays a time counter, as does the Pinnacle editing app.  Oddly enough, I movie does not.  (unless I have it somehow turned off.)

  • Getting the Failed status while doing the Play Back in oats

    Hi,
    i have recorded the script using the oats load testing with web/http.The script recorded succesfully without any errors .. but playing back the scirpt the overall result is displaying as failed.
    the errors are ...
    Variable "web.jscript.httpwwwgooglecom_88" not found for string: {{web.jscript.httpwwwgooglecom_88,aA12TaixLsnIrQem_5TMBQ}}12995821717263
    Failed to solve JavaScript variable web.jscript.httpwwwgooglecom_61:1:25:0:0.

    It's trying to extract a dynamic value from a javascript block, but it cannot find it. You could try turning off javascript correlation and then re-recording. To turn off this correlation go to Tools -> OpenScript Preferences -> HTTP -> Web Dom Correlation -> Edit -> de-select JavaScript -> OK.
    Regards,
    Jamie

  • Captivate 3 - What I record isn't always reflected accurately in the play back.

    I have been attempting to use Adobe Captivate 3 to record short video tutorials.  Everything seems very straight forward until I play back my slides. I then find that what I thought I had recorded isn't reflected in the slides. For example, I may have selected an 'OK' button low down on the page.  In play back the mouse doesn't reach the OK button but appears to click half way down a page.  There must be something simple that I am doing wrong but I don't know what it is.  I just want to be able to set up Captivate to record and play back exactly what I'm doing on the screen. I don't want to have to go through every slide readjusting things.  I'm sure it is some simple set up error that I'm making. Can someone advise me please?

    Hello,
    Could you explain how you did the capture: Full Motion Recording, Automatically (demonstration or simulation). I'd recommend the last one, but try to be a bit slower when performing actions, listen for the clicks that indicate that this has been captured. You can also force manually extra slides by using the PrintScreen key. You can also do the whole capture manually, if you want to.
    Lilybiri

  • Get rid of the play/pause it the play back

    Does anyone know how I can get rid of the play/pause symbols of my slide show when I play it on a DVD player?
    Thanks
    Tim

    Ok, I figured it out
    Its a function of the DVD player i was using, not IDVD
    Thanks
    Tim

  • Can I disable the Play Back Controls?

    Hello all
    In my project, I need the PlayBackControls(playbar controls) to work only on few slides instead of on all slides. I can hide the Play Bar but it would look unlike the other slides.
    So, can I disable the PlayBack Controls(i.e., the play bar sholud be visible but the controls shouldn't work) using advanced actions on particular slides?
    Regards,
    Kartik.

    Hello Kartik,
    I'm not a Flash programmer, only using functionalities of Captivate (inc. advanced actions) and AFAIK there is not such a possibility.
    If you want to have the same functionalities, you could insert custom navigation buttons, and you will be able to disable them on specific slides. Let me know if you want to try that, and in that case which buttons you want to have and which ones you would like to disable on certain slides?
    Lilybiri

  • Songs in "MUSIC" on my iPhone 4s won't start after tapping the PLAY icon.

    Songs in MUSIC on my iPhone 4S won't start after tapping the START icon.

    Make sure that is completely dried out. You can put it in a bowl of dry rice to ensure this. Otherwise its likely that the water damage ruiend a comonent. Try letting it dry, and if not take the product into apple. Unless you know how to take phone apart safely and look at the internal components.

  • Attached Documnets couldnt be retrived after rendering the Form

    Hello,
    I am using a process in which I render a pdf form (as XDP) and use a exceuteScript service to retrive attachment form a Database as a BLOB.
    I have done required conversions of BLOB to com.adobe.idp.Document i.e Document Type and these  document is then uesd as attachment to create a Map of Documents as required in renderPDFForm operation.
    Now process runs fine and it renders a PDF which i saved to see the attachments being attached, on pin Symbol of Acrobat.
    But when i try to open or Save the attachment (just as a check) it gives a warning and doesnt allow me to do so.
    The warning shown is :
    "Adobe cannot open the file attachment because your PDF file attachment settings do not allow this
    file type to be opened" (when trying to open form Pin Symbol)
    Other warning when i select attachment and try to save it from PIN sysmbol is
    "You have selected a file that cannot be exported from acrobat".
    Kindly suggest as to what is the problem.

    I am running into a similar scenario where a flat file (ASCII) is attached to a PDF form and when the file has no extension, the file can be attached but can not be saved or viewed after the file is attached.  Adobe gives the same error "Adobe Reader security settings do not allow this type of file to be opened."
    We already have the preference set to allow the opening of non-pdf file attachments.
    We have been able to edit the registry to allow the opening of a file with the .ASC extension, but when there is no extension, we are finding that Microsoft Registry settings will not accept the wildcard setting (.*).
    We are running Adobe Reader version 9.1.

  • Shaky play back after export

    The play back in imovie was fine. I then exported and the play back became very shaky. Even now after ecporting,  the play back with in imovie is shaky as well. Any suggestions?

    Hi(Bonjour)!
    Did you render your final sequence before monitoring?
    JES deinterlacer can does a great job with movie speed, and many other things.
    Look at:
    http://www.xs4all.nl/~jeschot/home.html
    See the demo movie at:
    http://www.xs4all.nl/%7Ejeschot/slomotests-JES-DEinterlacer-vs-imovie.mp4
    You have to export your clip before using JES as an external application.
    Set your speed, export from JES and import in FCE browser.

  • Getting back play counts and ratings after moving the librar

    Hi,
    I have just moved my music library on to my other internal hard drive. I pointed itunes to the new folder and then imported the iTunesMusicLibrary.xml and got all my playlist back. Unfortunately I cannot get my playcounts or my ratings to import. Does anyone know where these are located and how I can get them imported. With thanks.
    Sean

    Sean hello,
    the reason that none of the info was in was in your library is, you started a new library file... by default when iTunes starts it looks in the home iTunes folder for the file 'iTunes Library' if it is not there a new file will be created and all songs will need to be added again but all playcounts, ratings and date added data will be lost ...
    To recover your situation open the home iTunes folder and put the iTunes Library file on the desktop... now move the original iTunes Library file from the other HD back to it's proper place the home iTunes folder and leave it there... start iTunes for the 1st time after putting the file back by double/clicking on the file.
    TP

  • Version FCE 2 after rendering video, playback is jurky about 10 frames at a time. Audio is fine.  What is the fix?, version FCE 2 after rendering video playback is jurky about 10 frames at a time. Audio is fine.  What is the fix?

    I am useing FCE 2.  After rendering the video playback is jurky about 10 frames at a time.  Audio is fine.  What created the problem?

    I had been working on the project for a few days. It is mostly pix and a couple videos. It has several scrolling text segments. Everything was going fine, then after a rendering a large scrolling text it started. It appears that it skips 12 frames each time as I'm  playing back.
    Sequence:
    Tracks 3v, 4 A
    Vid Rate 29.97 fps
    Frame 720 x 480
    Comp DV/DVCPRO-NTSC
    Data Rate
    Pixel Aspect NTSC - CCIR 601
    Anamo
    Field Dom Lower (even)
    Audio Stereo
    Aud Rte 48.0 KHz
    Aud For. 32 Bit
    The video is a clip I purchased off istock (8sec.) of a flag waving
    CLIP:
    Size 35.9
    Tracks 1V
    Vid Rate 30 fps
    Frame Sz 640 x 360
    Comp. Photo JPEG
    Data Rate 1.8 MB /sec
    Pixzl Aspect Square
    Ana
    Field Dom. Not Set
    Alpha None / Ingore
    Rev Alpa
    Composite

  • How to retain the dialog messages defined in processRequest after rendering

    In my page one piece of code is there as "oapagecontext.forwardImmediatelyToCurrentPage(null,true,null);"
    which is used to render back to the current page,but after rendering the dialog messages which i have defined in processRequest are not coming.
    My issue is how can i retain that dialog message.

    Hi
    You can try and use guard conditions or check the table for data, if there is no data in the table the application will return an error message.
    Jarrod Williams

Maybe you are looking for

  • Fill in the blanks...

    Alright so I have this asteroid project I am having to do for a class... I pretty much have to make the asteroids game out of a template he gave us... I have a lot of it done but There are probably like 12ish blanks I need help fiilling in. He gives

  • ST05 LOBSTA what is this and how to interpret it.

    Hi all, there is an object LOBSTA in sql trace called LOBSTA, which has quite big execution time and points to some Classes.  Have you any idea how to interpret this object and what to do to improve execution times on it.

  • Can't transfer files from a mac external hard drive to a windows hard drive

    Today I went to a friends house to try and take some of his music from his external hard drive. So we plugged his mac converted hard drive into my computer, which is operating on windows 7, and my computer could not read that anything was there. So w

  • Why is icloud blocking my mails containings special words?

    I figured out, that icloud blocks any mails which I will recieve or send via my @me.com account. If I send those mails via another mailaccount it works, if my mail-partner sends the same mail to the other mailaccount it works, too. I tried a long tim

  • How  to update image in adobe form

    Good Day I am trying to update image in adobeform. i used object library->image->and double clicked it and i got a popup and given the path. i got my image there but when i am running my adobeform in url  I am unable to see the image on it.  is it  b