After repeatedly authorizing my computer in order to transfer my apps, I still keep getting the same error that says I can't since my computer is "not authorized". What should I do?

I'm trying to back up my iPad using my computer. But an error keeps coming up that says some apps could not be transferred. I've already authorized my computer but the iPad keeps saying that it's not. I've already clicked on "Store" and authorized it repeatedly. What's wrong?

Not sure if you were told what error 2009 is caused by so I'll let you know if you havn;t been informed. In the article http://support.apple.com/kb/TS3694 is says:
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Similar Messages

I am trying to order a book, I keep getting the same error message," A network error occurred while processing your order, please check your network connection and try again"

I am trying to order a book with iphoto, I keep getting the same error message.
" A network error occurred while processing your order, please check your network connection and try again"
I get the billing part up, it has even uploaded my jpegs but at the final process, I get the same message.
I have ordered two books a few months ago without any problems.
Now I keep getting the same message either half way into
the order or at the final hurdle after the images have been uploaded.
Any ideas?
My shared Network has been fine and that does'nt seem an issue.
Help.

Try again in a couple of hours - sometimes it is a temp condition
LN

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over

I need to update illustrator, flash and after effects and I keep getting the same error 49 over and over. Please help thanks!

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

HT201210 I have followed the restoration guidelines mention here but I keep getting the same error; 2009. At the end of my tether and don't what else to do as my phone can't get out of restoration mode. My computer is HP DC500 running Windows XP Pro with

I was updating my iPhone 3g from iOS 4.1 to 4.2.1 when suddenly I lost network connection and the process failed. I have since tried to restore my iPhone 3g with no luck. I keep getting the error code 2009. Which instructs me to check my computer is up to date and all third party security software are turned off. I have done all these pulled out all usb devices but for the one that is my internet modem. I am running Windows XP Pro SP2 on HP DC500 minitower. How do I get out of restore mode. Thank you kindly.

Not sure if you were told what error 2009 is caused by so I'll let you know if you havn;t been informed. In the article http://support.apple.com/kb/TS3694 is says:
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Once I connect my iPhone to the computer to sync., the computer crashes. I unistalled and installed iTunes, still I get the same results. If I disconnect the iPhone from the computer, iTune will work, I therefore uninstalled the iTune from my computer.

Once I connect my iPhone to the compjuter to sync., the computer crashes, and continues to reboot as long as the charge cable is connect between the iPhone and the computer, once I disconnect it, then the computer and iTunes will function normally.
I had uninstalled and reinstalled the iTunes 3 different times, still I am getting the same results, I therefore had to uninstall the iTune from my computer to be able to do my work, and charge the iPhone at the same time. Please note that few weeks ago, everything was working fine.
What can I do to resolve this issue.
Thank you.
Magdi

If you have photos in the Camera Roll on your iPhone and have preferences set to open an image azure application on your pc when a camera is connected, your pc will do just that. That's how one transfers photos taken with the phone to a PC.
You can do two things to avoid this.
1. Just quit the image capture application and open iTunes. You do have iTunes 10.7 or higher installed on your pc, right?
2. You can change the preferences on your pc to do nothing when a camera is connected. And you can set the preference in iTunes to open iTunes when your iPhone is connected.

Can anyone help me get my iMac to reboot? I get a gray "curtain" over the start up screen saying I need to restart my computer but it won't restart. I just keep getting the same message every time.

Can anyone help me get my iMac to reboot? I get a gray "curtain" over the light gray start up screen with a message that I need to restart my computer and to hold the power button until it powers off and then press the power button again to restart. It just does this over and over again and won't restart.

Yeah, as necronym stated, it is a hardware issue and more than likely a RAM problem. Disconnect everything from the computer except keyboard and mouse and try again. If it still happens try removing one and/or swapping your RAM sticks over. Keep trying until you have eliminated all possible combinations. Just put a mark on one RAM stick so you know what have tried. If it still fails to boot properly you should probably replace your RAM, but that is no guarantee of success. Have a look at this link for more info on a Kernel Panic.
The X-Lab - http://www.thexlab.com/faqs/kernelpanics.html
Does the display look like this?

After several attempts to download Illustrator CC I keep getting the same error message about Error Loading plugins

I have run out of ideas.

Mojorocker64 what error messages are you receiving during the installation process for Illustrator CC? For details on how to locate and interpret the installation log files please see Creative Cloud Help / Troubleshoot install issues with log files | CC. You are welcome to post any specific errors which you discover.

I am unable to use Iboost app, when i try to use it, I get an error "iBoost App is damaged" and reinstall from app store. I get the same error even after installing a fresh copy. Need help to resovle this issue.

“iBoostUp.app” is damaged and can’t be opened. Delete “iBoostUp.app” and download it again from the App Store.
Because of the above error, i am not able to use iboostup application. I have even tried to reinstall from app store, but the issue still continues.
Need help.

Perhaps the damaged file is an auxiliary file outside the app bundle and stored elsewhere on your Mac. Try deleting the app and all it files with an app for that purpose. Afree one is AppCleaner;
http://www.freemacsoft.net/appcleaner/

Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"... I have deauthorized and reauthorized the account and still getting the same error.

Trying to sync my iPod with iTunes and I am getting this message:"This computer is no longer authorized to play purchased items that are on the ipod"... I have deauthorized and reauthorized the account and still getting the same error. I have read and followed the instructions in the support article TS1389. I do NOT have an SC info folder at /Users/Shared/ directory to delete.
I just installed Lion yesterday, and am running iTunes 10.4. First attempt to sync since upgrade.
Thanks
Dan

Yup,
Me too...this is stupid, stupid, stupid. Just purchased my 200 (ish) mac and now I am told that my new Mac Book pro is not "authorized".
Which if my 200 macs are authorized. Can someone please tell me???
I "deauthorized" my old MBP and still told I cannot use my iPhone with iTunes.
Interesting that my old $2500 MBP, my new $3000 MBP and my $500 iPhone all cannot work cuz of some pinhead's decision to use this assorization process.
Yes I am very, very, very mad.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

HT204088 How how can I synch my ipod + iphone music to my new computer? I get the same error "my ipod or iphone is synched with another itunes library.An Ipod can be synched with only one itunes library at a time. What would I like to do Erase and Synch

How can I synch my ipod & iphone music (purchased from itunes on my old laptop) to my new laptop? I keep getting the same message on my itunes on my new laptop: " The ipod/Iphone is synched with another itunes library. An ipod/iphone can be synched with only one itunes library at a time. What would you like to do - Erase and Synch or Transfer Purchases?" What do I do?
A couple of other items:
1) I am guessing Apple does not keep a history of all my music purchases? As I did not have my entire library backed-up anywhere, and relying on the music I have on my ipod and my iphone as my only source of itunes music....I have lost over 500 songs!!!
2) I used to have an Apple account under another account name, and since have switched to a new account name. Is there anyway to find the history of purchases from my old Apple account name and transfer these over to my new account name and onto my new laptop?
I hope someone can help, I am having a very difficult time trying to obtain answers. Angie

The iphone/ipod is NOT a storage/backup device. Not maintaining a backup copy is a big mistake.
You can transfer itunes purchases from your iphone/ipod to your computer:
Authorize your computer for all accounts and then click File>Transfer Purchases

I am selling my Macbook and am trying to erase and do a clean install of 10.6. I keep getting an error that says I can't install OSX on this computer and can only restore from a back up. I've tried repartitioning the disk and made sure it was GUID.

After restoring the disk from a back up, I'm still getting the same error. Why won't it let me erase and re-install??

Are you using the original gray-faced OS X DVDs that came with the system (if so, what OS X level does it say on the disk) or a retail copy of OS X 10.6 or another gray-faced OS X disk from another system? You can't use a gray-faced OS X disk from, for example, an iMac or MacBook Pro, to install on your MacBook.
Was it originally delivered with an OS X level that is greater than what you're trying to install? You can't install an earlier level than what came with the system.
Did you boot to the DVD, and use Disk Utility to create one disk partition, then reboot and try to install?

I too cannot download latest itunes version. Am seeing all of the same error messages. MSVCR80.dll is missing from computer. For windows "Error 7 (Windows error 126) appears. Must be a defect in the lastest software update. How do you get Apple to respond

I too cannot download latest itunes version. Apple needs to respond and fix what is certainly a software defect. Am seeing all of the same error messages including MSCVR80.dll is missing from computer. For Windows 7 a "Error 7 (Windows errror 126) appears. How do you get Apples's attention. It is impossible to link up with real support from their website?

Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)

After repeatedly authorizing my computer in order to transfer my apps, I still keep getting the same error that says I can't since my computer is "not authorized". What should I do?

Similar Messages

Maybe you are looking for