After replacing the logic board in my Macbook Pro it will no longer connect to the App Store.

I recently had to replace the logic board in my early 11 Macbook Pro (first gen i7).  With the release of Yosemite just a few weeks away I am trying to update from Snow Leopard 10.6.8 to Mavericks.  I'm afraid if I don't after this update it will become much harder.  I always lived by the rule if it ain't broke and for a long time Snow Leopard worked very well for what I needed to do.  All my software is current and there are no updates pending.  All my Keychain Access System Roots Certificates are good and I have no problems getting into iTunes.  I thought it might be something on Apples end but after 36 hours it's still the same problem.  When I try to open the App Store I get this:
Any ideas.  I don't use the App Store that much but until this I had never had this problem before.
Thanks for the help.
-Chris

From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

Similar Messages

  • The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

  • My Mac Book Pro suddenly will no longer connect to the Internet at my house. Help?

    My Mac Book Pro suddenly will no longer connect to the Internet at my house. My son's MacBook connects just fine. My MacPro connects at work, at Starbucks, etc. just fine, but not at my house. My son's however has no problem whatsoever. I assume that since his computer connects that the router and modem is not the problem. And since my computer connects everywhere but here . . . . it is not a hardware issue. When directly connecting my MacBook Pro to the modem or router the problem was the same. . . no connection. Help?

    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

  • I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?, I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?

    I need to buy a logic board for 
    Apple MacBook Pro 15" A1286, but i couldn´t find online to buy it where can i get one and if it´s possible if i can have it delivered to my hotel

    There are a lot of MacBook Pros with the model # A1286 - which year is your model (e.g., "15-inch Late 2011")?
    The only place that I know that you might could score a specific logic board is www.ifixit.com. They may be able to ship to your hotel.
    Clinton

  • The Logic Board of my MacBook Pro Retina Display stopped working.

    I purchased my MacBook Pro Retina Display 13 months ago. Barring a few errors the computer functioned beautifully, and I maintained it with the care it deserved. On Wednesday, last week, the laptop ceased to work completely. It wouldn't start, or charge. On submitting it for repair, I was informed that the logic board failed. Since its warranty lapsed a month ago, $1050 is required for its replacement. That outrageous amount is more than half of what I paid initially for the laptop. The service provider would not agree to any concession, or plea.
    For an Apple enthusiast, it is very disheartening to learn that its foremost product stops operating in this manner. I am a high school senior, who has accustomed himself to his computer, and cannot at this time purchase a new laptop, let alone a Windows laptop. With college admission deadlines fast approaching, I solicit your help and suggestions, very desparately.

    As much as it will suck to hear this answer, there really is no solution. Because the computer is now out of warranty, you have to pay the full $1050 to get the logic board replaced. I know this is a large sum of money, but you have to remember that the logic board includes the CPU, Graphics Card and RAM, all soldered onto the board. You're paying to replace all of the most expensive components of your computer, even if only one of them failed.
    So, long story short, you'll have to either pay to replace the logic board, because it's out of warranty, or buy a new computer.

  • I need to find an Unibody 2.66GHz core i7 logic board  for my MacBook Pro 15"

    I need to find an Unibody 2.66GHz core i7 logic board  for my MacBook Pro 15". Where can I find it?

    have you searched the internet? perhaps ifixit.com might have one.

  • I have a macbook, and i want to replace a processor and convert in macbook pro isthat possible , and wich processor is the best for my computer

    have a macbook, and i want to replace a processor and convert in macbook pro isthat possible , and wich processor is the best for my computer

    If you don't see any messages, not have anti-malware running or the Firewall on, try installing the Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8 (according to your profile).
    Restart your Mac after the combo in installed, try the App Store.
    Also... if you have an app called Little Snitch installed, that can prevent a connection to the App Store.

  • Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

    Who can shed some light on my ongoing connection problem.
    After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
    I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
    So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
    I tried all things of resets and forgets. No result.
    I have been fondling with my Airport Extreme 5 , but that did not help much.
    This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
    I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
    Ideas anyone ?

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • HT3964 I have a MacBook Pro that will not boot up. The apple symbol   Read more: I have a MacBook Pro that will not boot up. The apple symbol is there and a spinning wheel continues to spin. Any options??

    I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?

    Reinstall OS X.
    Reinstalling Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    OR
    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    The hard drive on my Macbook Pro is getting full (mainly due to the size of my iTunes library). Can I store it on my time capsule and if so, how is it done ?

    You can store your iTunes library on a Time Capsule.  So that you can access on your local (home) network (I wouldn't recommend access via the internat), (off site.....to slow).  
    If you do decide to put your libray on Time Capsule I'd recommend doing this.
    Option 1:
    1.  Don't use TC as a Backup (Time Machine).
    2.  Connect a USB drive to your TC or Computer and backup to the  drive. Backup when a change is made to the library (adding Apps, Songs you get the idea). 
    Option 2:  (What Im doing)
    1.   Two Time Capsule's connected via ethernet cable (roaming mode, bridge).
    2.   Use TC1 as a Time Machine backup
    3.   Use TC2 as network drive.  (The information on TC2 does NOT get backed up to TC1).
    3a. Connect a USB, FW, drive to your desktop computer (if you have one) use SilverKeeper to schedule backups.       Silverkeeper will look at TC2 and back it up to a external or internal HD.  I've been doing the or some time now.  Or connect to your TC and do an archive.
    I have this setup because I don't trust Cloud base services and I want access to my files (in Sync) on TC where ever I am, as long as there's a internet connection.  It's expensive, but does exactly what I expect.
    The most important thing is to safe guard your data in case of a failure.
    In your situation it would probably be better to get a high speed SD or thumb drive, however I've never been successful in backing up those type of drives with TM.  What ever you decide to do make sure you have a GOOD duplicate (backup).

  • Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    Hi how do I unistall the Adobe downlaod assistant from MacBook Pro?  I've managed to unistall the Acrobat Pro and the Acrobat Pro Cloud but the assistant app doesnt give me this option (I'm suing Finder). Thanks

    AMelie Eliabeth the Adobe Download Assistant can be dragged to your trash can.  There is no separate uninstaller or any other application files to remove.

  • Will no longer connect to the internet

    All of a sudden Adobe Digital editions will no longer connect to the internet.  It was fine before last Tuesday. Check internet settings and firewall and nothing helps. Why is it doing this and how can we fix it.  Windows 7 - 64 bit

    Did this [[Cannot connect after upgrading Firefox|start after upgrading firefox?]]
    Generally if Firefox can't connect, but other applications can, it's a configuration problem with a [[Firewalls|software firewall]], either one you installed yourself, one that was included with other security software, or the built-in Windows Firewall.

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • My ipad will no longer connect to the internet. Everything else does.

    My ipad 1 will no longer connect to the internet. Everything else does. and nothing new was done to the ipad. It's running ios 4 and was fine since the day it came out.

    Emma-
    In Safari, press on the Bookmarks icon and select History.  Then press on Clear History at the top of that menu, and see it there is any improvement.
    If not, try unplugging your WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    Fred

  • Since updating my ipad it will no longer connect to the internet

    since i've updated my software on my ipad it will no longer connect to the internet. my husbands iphone will not connect either. my laptop connects immediately and my internet signal is full strength. is there something we are missing?

    Hello dchoffa,
    Thank you for using Apple Support Communities!
    I would start with this troubleshooting from the article named:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    If the above troubleshooting does not resolve the issue, I would next try the troubleshooting in one of the other sections down toward the bottom that fits your scenario.
    Regards,
    Sterling

Maybe you are looking for

  • Podcasts won't sync to iPod

    I have some podcasts that aren't syncing to my iPod. I have tried resetting my iPod. I have tried un-syncing, letting it complete, disconnecting my iPod then reconnecting it and choosing "sync all podcasts". When I do that, all the podcasts sync over

  • Excise asset tranfer from one plant to another within the company code

    Hi All, Please provide me the procedure how to transfer an asset from one plant to another. The asset is an excisable pls provide the process for accounting in SAP for movement of FA on which we have taken excise duty and further we have to pay duty

  • Keyboard temporary malfunction 10.8.4

    Hello, I have big problem. After upgrade to 10.8.4 I have problem with my macbook (I'm not sure, if upgrade is problem, but it's singnificant event). I install some other problems.. I use notebook every day, average 10hours. Before this I don't have

  • Text letters are jumbled, or shuffled

    My text characters keep getting jumbled after I reopen and after effects file. The only way I've been able to save it, is by recreating the text effect, or transition. It happens with text effects and presets or just basic transforms. Has anyone else

  • Library gone - 'file could not be used..."

    I know this question has come up before and I've read a lot of posts to figure out what has happened, but I don't know if they are what I'm looking for. The other night I was listening to itunes just fine, the next afternoon, I open it to play music