After Replicating New DataSource

We went to our Development box (r/3 side) and activated the new delta enabled 0Coorder_Attr. It created a transport that I moved to r/3 Q box. On the BW Development box I replicated the datasource. With the new 0cOrder_attr i had to adjust the transfer structure manually and activate mannualy. It also created a transport.
I then went to the Q bw box and replicated the datasource then moved my Bw transport to the bw Q box that should of changed and activated the tranfer rules and transfer structure but it did not.
Problem is the transfer structure is still inactive on the BW side.
Is there a way to activate this with a transport ?
Thanks

Hi Richard,
If your infosource is transported successfully and you replicated your data source in Q system, and then if you think that your infosource is not active the go to "se38"
and run the program "RS_TRANSTRU_ACTIVATE_ALL" give your source system and infosource name and say execute this will activate your trasfer structure and communication structure as you do not have direct ICON of activate in Q system.
Hope this will help you.
Suneel

Similar Messages

Creat a new Datasource in BW

In Administration Workbench->modelling->Source Systems:I want to creat Data source in BW and replicate it from R3.I have already created a Data source based on a table in R3 and when creating it,there is only one item in applcation component:NEW_HIER_ROOT,not a tree hierachy.And in BW,when I creat a new data source,the background user in BW is grey,couldn't be changed.After I finished the procedure,system displayed that source system already exit.but it contains the tree hierachy.After I replicated,It hadn't datasource which I created.What's the problem?How to fix it? Give me the hits,please.Thanks.

Hi dear and welcome on board!
First of all, if you want to see all the other items of the std hierarchy, you have to execute RSA9 transaction...
Then, I'm not undersatnding what are you doing with your new datasource...
You simply have to create your datasource in RSO2...then go in RSA1, source system, replicate datasources...
Then go to the infosource page, create a new infosource, assign a source system and then you will see a list of available datasources...here you have to see your new one, choose it, manage the transfer structure/rules...
That's all!
Hope it helps!
Bye,
Roberto
...and please don't forget to reward the answers...it's THE way to say thanks here !!

Crystal Reports 2008 - Error setting new datasource location

Hi All,
We are experiencing an issue while trying to set datasource location for our RM 3.0 reports in Crystal Reports 2008 designer. As per guide "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports" (step 11), after opening the desire report we go to DataBase-->Set DataSource Location and when selecting our RM system (which actually has the BI content addon installed on it), we got the following error message:
"Some tables could not be replaced, as no match was found in the new data source. Please verify the table required for any unmodified tables"
I'm new on this so I'm not sure if the table indicated in the original datasource should exist in my DB (new datasource) before doing this? If so, how those tables are imported or created in our DB?
Could you please help me on this issue?
Please let me know if any other detail or data is required.
Regards

Hi Don,
Thanks for the update.
Actually I've installed SAP Integration Kit and its Fixpack in both....BOE Server (which is the same as the SAP server) and in client pc. In all cases we have select a typical installation which supposes the required drivers are available. Also I've followed Ingo's documentation to activate and publish standard Risk Management reports (RM reports). Everything works ok with them. We are able to access reports through the application.
The issue appears when trying to customize one of these standard reports through CR Designer. For example if we select the "GRRM_Risk_by_Risk_Category" and try to customize it as indicated in the "SAP BusinessObjects Process Control 3.0 and Risk Management 3.0 - How to build and Personalize Custom Crystal Reports"...the table behind this report (table GRFN_CY_API_GRRM_R1) it's not in our RM System. My main concern or question is regarding this....Did I miss something while importing transports files, activating or publishing RM reports, etc....and thatu2019s the reason why this (and any other) table is not already in my system? I was not able to find where those tables are supposed to be or how they should be imported in my system. The odd thing is...that we are trying to customize and set the new data source for these reports to the same system from where they are being opened. Put in this way...RM reports have been activated in system A (RM System) and published to system B (BOE System). While customizing reports through CR Designer...we are actually opening reports from system A. These reports have as their original data source...a demo SAP system info (uxcir1p.wdf.sap.corp) and when we want to update this data source with our RM system....the error appears. The whole process is explained in the above mentioned guide for your reference.
Hope being clear enough..
Thanks for your help

Replicating the datasource

Hello SAP Gurus,
I have a question on Replication of Datasources.
If I create a new datasource in R/3 Development system and replciate the datasource in BW
and create an Infosource and collect the objects of BW (infosource Communication structure ,Transfer structure, Cube) and R/3 (Data source).
and I imported R/3 datasource to Next environment (QA) ....and without replicating the datasource in BW.
I want to transport the BW objects without replicating the datasource.
Is it Possible?
Thanks.

Super Man,
what ever it may be the verrsion you need to replicate the DS. when ever you make any chnages(any technical changes to the DS i.e. adding new fields, changing the technical attributes of the field etc) or create new DS or install BC DS, you need to replicate in BW. When ever you replicate the DS, it copy logical view of DS in SAP BW(Means Meta data will Transfered). without replicating it's not pissible setup data flow.
All the best.
Regards,
Nagesh Ganisetti.

New datasource does not get copied to oc4j-config directory

Today I created a new data source (jdbc/BLUETEST) in my projects data-sources.xml file and assigned it to all of my beans (that used to be assigned another datasource). After rebuilding the project and starting up the application, I got an error that said that there was no datasource jdbc/BLUETEST. Apparently, the new datasource had not been copied to the jdev/system9.0.5.0.0.1375/oc4j-config/data-sources.xml file. I copied the info manually and the app server is booting ok now.
Is this a bug?
Rudi.

Thanks Richard for the note. Can you please provide details on the rfc? We were wondering of creating a BADI and calling the same using a process chain through BPC DM. How is this different from rfc?

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.

If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go

After updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

fter updating my IOS TO 8.1 (12B411) on 10/23/14, I went to update my blood sugar level in the IHealth app. And now after the new IOS update I'm unable to find the blood glucose option in the IHealth app. Did Apple remove it or just mess up AGAIN?

Apple removed blood glucose until further notice. The reason behind this is that it gave a distorted picture in countries where the medical world used other measuring units. I suspect it will be available again in a future update.

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though

I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod.

I have several albums by and an artist as is expected for a number of artists. But after the new iOs5 update my ipod touch now only showing one on my ipod. I have already resynced it, any suggestions on how to fix the problem without having to restore my iPod to factory settings.

Becaise the digitizer is broken in that area
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created

Sorry, something went wrong --- I got an error message after a new webapp was built and a new site collection was created.
This in SharePoint 2013 Farm.
What should I do?
1- I did a DisableLoopBack and set the value to "1".
For hostname do I have to do : 111.111.111.111 (sample) and serversp2013?
P.S. I fixed this issue once, long time ago and I forgot how it ... be done.

Hi,
For troubleshooting your issue, please take steps as below:
1.Go to IIS, make sure the web application is actived.
2.Go to IIS -> Applicaiton Pools, make sure the application pool related to your web application is started.
Reference:
http://support.microsoft.com/en-us/kb/926642/en-us
http://www.techrepublic.com/forums/questions/cannot-browse-created-web-application-site-in-sharepoint-services-30/
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

HT204406 after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button?

after this new itunes and ios7 update all my music is off my ipod touch unless i download them one artist at a time, i have over 3500 songs in there. really? is there no easier way to get my music back into my ipod? like a download all button? thanks.

thanks for the reply. guess i'll have to do that. apple, not really happy with what you've done with this latest update. have not been able to enjoy my music in my car since the update. most of us dont mind changes that progress timely, but this was much more than just a progression. this was a complete change. and not a good one, at all. thanks to the two people that replied. appreciate it.

I had to reset my IPhone 5 after the new IOS update because I was not getting phone calls. Now I no longer have the microphone on my keyboard for emails or text messages. Any suggestions on where to go to fix this?

I had to reset my IPhone 5 after the new IOS 7.2 update because phone calls were not coming through. Now I no longer have the microsphone on the bottom of my key pad to do voice texts.

Can any one tell me how to put it back on there?

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
Do anyone know what I supposed to do in that situation?
Really need help!
Thanks in advance.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HDR is not working after a new installation of Photoshop

After a system crash of my computer I had to reinstall all programms. In the past I made a lot of HDR pictures, I will say I know what i have to do. But after the new installation of PS when I merge some photos with HDR pro the result is much more darker then the darkest of the braketing photos, and there is no way in the ACR (adobe camera raw) to get an acceptable result. I will show you screen prints:
Do you have a solution for this?
Many thanks...

Chmeva wrote:
It also makes "a lot of noise" ("a lot" in the sense that if I put it next to my ear I can hear a lot of clicking sounds from inside) while attempting to transfer songs/sync,
This normally, is a sign that your iPod Hardisk is dying. Do the iPod Disk Diagnostic as posted by tt2. it wont fix your problem, but it will help in troubleshooting.
Have a nice day!

After Replicating New DataSource

Similar Messages

Maybe you are looking for