After resetting all plug-ins a recently installed plugin no longer works and will not reinstall. It will not show up in the add-ons depsite saying it installed

I recently had to reset my plugins using Firefox 12 in safemode to get rid of an extension/add-on causing a redirect problem. All has been well, except a plugin I needed no longer works. It is called "missing-e" and is for Tumblr.
I have tried reinstalling it at least 5 times, per their instructions, and am now here after they said it was a browser issue. I do get prompted to install it to firefox, I have it install, I get the message it was installed correctly - but then it never shows up in either the Extensions or Plugins area under Add-Ons area (though nothing ever shows up in Extensions). And the features it enables in tumblr are not enabled.
The 'missing-e' people sent me here saying they believe this is a browser problem.

Are you talking about plugins or extensions (Tools > Add-ons > Extensions) as you mention Safe mode?
It is possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.

Similar Messages

  • Why are my installed extentions on FF 5.01 suddenly not showing up in the add-ons window tab (to change preferences), even though the extentions (like Google toolbar and Awesome Screenshot) are visible on the FF interface?

    My Google toolbar was working fine earlier this morning. A few hours later, the search window stopped opening new tabs. I did some snooping and discovered that none of my extension add-ons were showing up in the add-ons tab. However, the appearance and plug-ins are still listed. When I click on the Extensions tab there is just a small box that says "You don't have any add-ons of this type installed." However, my Google toolbar, Add Blocker, and Awesome Screenshot etc. is still visible in the FF interface. When I try to uninstall the Google toolbar using the options button on the toolbar itself, nothing happens. What's up?

    Same solution as dplavin. Thanks!
    Afterwords there were some changes in Add-ons that were enabled/disabled that then had to be straightened out.
    I disabled Test Pilot which was in the process of testing thinking that it might have had something to do with the problem. I have not updated to the latest version of 5.0 because one favorite Add-on [Firegestures] is supposed to be incompatible.

  • I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this

    I have the newest version of the mac book pro and i recently bought iLife 11 because i needed idvd but when i installed iLife my iphoto no longer works and will not let me open. How do i fix this

    Welcome to Apple Support Communities
    iTunes in Mac OS X Tiger is outdated. Open  > Software Update to install the latest iTunes version for Tiger.
    If you need iTunes 10.7 or a newer version, you have to upgrade to Mac OS X Snow Leopard. First, check that your Mac is supported > http://support.apple.com/kb/sp575 If it is, buy Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    After buying Snow Leopard, make a backup of your data, insert the DVD and upgrade to Snow Leopard. After upgrading, open  > Software Update, and install the latest Snow Leopard version. Finally, run Software Update again to install iTunes 11.0.4. If you want to install iTunes 10.7 instead, download it from the Apple website > http://support.apple.com/kb/dl1576

  • After updating Firefox to 5.0.1 the add-ons Manager did not show any of my add-ons, although they were all running.

    After updating Firefox to 5.0.1 the add-ons Manager did not show any of my add-ons, although they were all running. Several restarts of Firefox, even with the add-ons disabled did not bring them back. I then installed another add-on and after restarting, all of the previous add-ons are now shown in the manager.
    Running on Mac 10.5.8. Add-ons installed:
    Adblock Plus, Add-on Compatibility reporter, Ant Video Downloader, Forecastfox, Google toolbar, Reload Every, Session Manager, and Steep and Cheap Watcher.
    Note: the troubleshooting information was taken after the problem was fixed. Prior to fixing the issue, there were no items under the Extensions heading. Add-on Compatibility Reporter was the add-on that was added to restore all of the other add-ons, even though it was already installed.

    '''Good to know you solved your own problem by simply installing another extension''', I like solutions that aren't going to cause extra work, or loss of data.
    Here is what people normally have to do for missing extensions, as if not installed.-- <br>https://support.mozilla.com/questions/826729
    :http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_%28Firefox%29
    FWIW, renaming or deleting extensions.sqlite and the other files beginning with "extensions." causes the files to be rebuilt from the extensions directory, so nothing is lost, but they will be restored in alphabetical order.
    I've solved places.sqlite problems by simply restoring a bookmarks backup, or creating a bookmarks backup and restoring that rather than face loss of history.
    Please mark as solved so others will see your answer when looking for solved problems as solutions to there own or other people's problems.

  • I have been using aurora and updated to 12.0a2 and my computer continually freezes even after disabling all plug-ins and i have even dumped stuff from the memory on my hard drive.

    i continually get the same 12.0a2 update box that pops up in the bottom right corner even though i have the updated version and i have to wait for the aurora updater to do something everytime i start a new session. i went through and disabled all plug-ins and have no extensions active and this doesn't solve the problem. according to plug-in check all plug-ins are up to date. aurora does crash every once in a while where it closes out all my windows...but i do not get the crash report anymore to report it. is there a problem with aurora? i even updated FF in case that had a factor in the crashes/freezes!! FF used to do this same thing all the timea fter a new update but this is ridiculous!! WHAT IS THE PROBLEM? typos courtesy of freezing!!!is there a problem with aurora? i can't go more than 2 minutes without constant freezing and the "not responding" message. i have run scans on my computer weekly since i updated to aurora and there is no threats/problems...why does this keep happening?
    addendum...i have added the crash reports for the last week...does that give any insight into why this keeps happening?

    i am not sure what this means? "not for public use"? i did not seek out another version of FF it was an option on mozilla's page when i needed to update FF!! i know that i will run into these problems if i do not keep current and it was an option so i chose it. are you suggesting that i dump aurora from my system and go back to using just FF? i'm not a developer or know anything deep regarding the physical or logical of systems...i am just trying to keep good maintenance on my system!! i need a browser that works with me and not against me...chrome does not do what i need...neither does opera...FF is the only browser that i have used for almost 4 years now and i don't plan on going back to IE or changing to those mentioned above...i just want to know that when i see new offerings on mozilla products and i accept them into my system that they work much better than what i am experiencing currently!! i get that it is open-sourced and therefore a work in progress

  • I have the latest Adobe flash player installed but it does not show up in my add-ons or plug-ins on Firefox 3.6. In the plug-in check, it recognizes that the shockwave flash is up to date. How can I have the plug-in appear and be enabled on firefox?

    I have uninstalled the flash player and installed it numerous times with no recognition by the Firefox plug-ins. I also have uninstalled Firefox and reinstalled it as well. I have also restarted my computer several times as well. The flash player is certainly installed but not working on Firefox. Thanks in advance for your help.

    James j,
    You have a different problem. Your screenshot shows "The Adobe Flash plugin has crashed".
    See [[Plugin crash reports]] and [[The adobe Flash plugin has crashed]]. If you need more help you should [[ask a question|ask a new question]] (start a new thread).

  • My Iphone isnt working and its not showing the home screen after trying yesterday to download OS5, please help me

    hi
    yesterday i tryed to sownload the new software OS5 for my iPhone and after waiting the proccess to end, suddenly a message appeares saying the iphone wont restore!
    after that the iphone stop working at all and not showing the home screen to me !
    just it works by showiin the apple logo then a loading process that works for ever till the barrerry ends.
    so please help meand can i fix it here or i have to go to a maintinace shop
    thank you

    Connect the charger and let it charge for at least 30 minutes before you try to turn it on. Then let it charge  untill full. The iPhone (or iPad) need at least a little charge before you can turn it on.

  • . FF Ver 4 is very slow and does perform as well as 3.6. I uninstalled 4 after downloading ver 3.6.16 and that is causing colorfultabs not to color and the Add-ons page is freezing making it unable to use it. Ver 4 runs very slow. Please help.

    It seems my machine does not like your ver4 and 3.6.16. I want the ver prior to 3.6.16. . Since the last 2 updates have not been able to use FF to browse or play Webkinz. It is way too slow. Following the install of 3.6.16 the Colorfultabs is not working and I can't fix it or adjust it because the Add-ons list/page freezes. I have removed/disabled several add-ons and extensions and nothing seems to help. If it were not for IE I would not be able to use my machine. I have 2.5 GB of memory and 30 percent plus of free space on my hard drive. I use Windows XP SP3 if that makes a difference. I don't think I need a lot of add-ons but need to know what I can remove. The feature to open FF without any add-ons is gone for some reason. Please give me back my simple smooth operating FF. Thank you.

    I had all the dot nets in add/remove but discovered they were not installed. Got all up to date. Puter is 2005, I have all that U listed except Win7. I just don't know if I need that or not. Did U say that I need more than the 2.5 GB
    memory that I have? Please tell me why Win7 is better than WinXP.
    FF is running much better now but Webkinz accounts are still loading slower than in IE. I am wondering if maybe I should totally remove all of FF including customizations and personal info and start over fresh with a clean install of ver 4. I am still using ver 3.6.16. Is it possible that this is reason for Webkinz (a flash, java and Unity game) not loading good? Also, are there some of the Plug-ins that I can remove? What Audio players do I need? I have wmp, real player, aol media playback, realarcade, realjukebox, also is Zylom usable? Thank you so much for your help.

  • " plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

    Hi,
    Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
    Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
    Thanks,
    Shyam

    Hi Linc,
    Thank you for your response. Here is the screenshot of the warning that I am talking about.
    Here is what I do:
    1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
    2. Click Security Tab and click Manage WebSite Settings
    3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
    4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
    I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
    Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
    Thanks again,
    Shyam

  • Add-ons Manager Says Java Needs Update, But Latest Version Already Installed

    I have Java version SE7 U51 10.51.2.13 installed and working fine. Today I "upgraded" to FF 28.0. Now the Add-Ons Manager says Java is out-of-date, but when I go to the Java website, this is the very latest version available. I downloaded both the 32- and 64-bit versions anyway (though I had already installed them a month ago) and re-installed both. The FF Add-Ons Manager still has same warning: "Vulnerable- Update Now!" The Java Test page says I have the latest version, and it works.
    So what the heck to do?

    Never mind- found the answer. It's the same old silly runaround between Firefox and Oracle. The Firefox link send you to the wrong Java version (outdated) and you have to find the correct Oracle webpage that now has Java version 8 (actually v.1.8.0 plug in 11.0.2.132) and download and install THAT. It would be nice if this were simpler...

  • MAVERICK INSTALLED AND LAUNCHPAD NOT SHOWING APPLICATION ICONS

    maverick installed and launchpad not showing icons

    I have the same problem on my NMac Mini but not on my iMac.

  • The "edit in" does not launch if I make any develop changes.  I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine.  Edit in does work if I reset the image or load an unmodified DNG.

    I am using LR5.6 on a Windows 7 machine with plenty of memory.  LR, CS5 and all of my plug ins have been working just fine.  Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch.  I can use the Edit in command on an unmodified image, or if I reset the modified image.  I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne.  I believe that all of the plug ins are current.  I've been working with them yesterday and I had no issue.  I cannot recall anything that has changed since then, and I have not installed any software.  I'm at a loss!!  Please help!

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • After Effects PLUG-INS WON'T Install

    After Effects CS5 64-bit PLUG-INS WON'T Install..
    Pls help me... I know how to install plug-ins.. Just paste the File or Folder that i downloaded to C:\Program Files (x86)\AdobeCreativeSuite5\After effects\Support files\ Plug-ins.But After that I open After Effects and in Effects panel none of the plug-ins show. all the forum saying this.. But i already try it many time . even resetting the PC or AE.. I really need the Plug-ins so please anyone reply..
    Its sad that my other Question about Adobe media Player in this site no one answered it. anyway All the plug-ins that i buyed and download are saying the same procedure. that i said earlier,  just to copy and paste. but none of the readme file correct.

    >  I know how to install plug-ins.. Just paste the File or Folder that i
    downloaded to C:\Program Files (x86)\AdobeCreativeSuite5\After
    effects\Support files\ Plug-ins.
    That's the wrong path.
    This is the right path (as provided in "Plug-ins"):
    C:\Program Files\Adobe\Adobe After Effects CS5\Support Files\Plug-ins
    > Its sad that my other Question about Adobe media Player in this site no one answered it.
    You didn't ask such a question here in the After Effects forum. I don't know what question you're talking about.

  • Why can't I install the latest version of Flash Player?  I have all plug-ins allowed.

    Why can't I install the latest version of Flash Player?  I have all plug-ins allowed.

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 8. Back up all data before making any changes.
    Step 1
    You might have to log out or restart the computer before a Flash update takes effect.
    Step 2
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
    and confirm. Close the window. Then select
               ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.
    Step 3
    If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 4
    a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
              When visiting other websites
    From that menu, select either Allow or Ask.
    b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
    c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
    /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
    Right-click or control-click the highlighted text and select
              Services ▹ Open
    from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    Step 5
    In the Safari preferences window, select the Advanced tab and uncheck the box marked
              Stop plug-ins to save power
    Step 6
    Open this folder as in Step 4:
    /Library/Internet Plug-Ins
    Delete the following item, or anything with a similar name, if present:
              Flash Player (failing).plugin 
    You may be prompted for your login password.
    Step 7
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 8
    If you get a "missing plug-in" error, select
              Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked  
              Allow (or Enable) plug-ins
    Then click the button marked
              Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 9
    Select
              Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.

  • Upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then diabled all plug ins and extenstions - still 60 seconds to load browser.

    I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

    I upgraded from 3.6 to 7 - changed nothing else - now takes 50-60 seconds to for the browser to start - works OK after that as long as I keep a window open. I then disabled all plug ins and extensions - still 60 seconds to load browser. I also keep getting a high memory warning from AVG with mem usage up to 600,000 k

Maybe you are looking for

  • Dynamic Column Name on Interactive Report

    Hi all, Is it possible to assign a SQL result to a Column name on an interactive report? I have been able to do this on a standard SQL Report though the use of page items but have not had much luck with interactive reports. Any help is appeciated. Th

  • Component resize, paint and AffineTransform

    Hello, I am resizing a JInternalFrame that contains a JPanel. When I call: MyJPanel.repaint();The paint function gets the dimensions of the JPanel using getWidth() and getHeight(), once, at the start of the paint function. The function then proceeds

  • How to store/display images with SQL Server 2000

    Hi everybody, I'm totally new to ColdFusion, and creating a sample project, where a user would enter in a person's info and upload a picture of that person. I trying to get my app to save that image to SQL Server database and then to display that pic

  • Initialize a global with a global from another file

    hi, I know that initialization order for global variables across compilation units is not defined, but if I have file1.cpp   int x0 = 33, x1 = 55;   extern int y0, y1;   static int a[] = { y0, y1 };   void print_a( void ) { printf( "\na[0] = %d\na[1]

  • Regarding perfrommance tuning

    hi expert, i am having 5 millions records i want to insert record in a table which statement is faster from following. 1 insert into test1 values() select * from test 2 using bulk collect plz can me help me which one is the improvement of performance