After resizing a photo and viewing in album picture offsets to one side and crashes ios7
After resizing a photo using the edit function , viewing the photo in camera roll
Offsets the picture to one side so its not in the middle , zoom into the pic and zoom back out
The black borders appear at the top and bottom and all looks in centre
But when i flick back and forward through my pics and get back to my
First pic i resized it offsets to one side and the camera roll crashes and freezes
Since you can't drag a photo when viewing in the large mode you can try the following:
1 - make sure the Info drawer on the right side is displayed.
2 - click on a photo and hit the Space bar.
3 - click on the Full Screen button at the lower left.
Now you're in full screen mode with the Info drawer at the right.
4 - either set the rating of the photo to one that you can use to group in a smart album (Command-1 for 1 star, Command-2 for 2 starts, etc.) or add a keyword that can also be used to group the photos in a smart album.
5 - use the right or left arrow keys on the keyboard to move to the next or previous photos.
6 - when complete go to the smart album and drag the photos into a regular album.
Similar Messages
-
Why and how do I fix this? When I go into cellular data and view account it says my ipad is activated and ready to go. What gives???
It was working fine up until I upgraded the OS which I hadn't done in many versions so the ipad was not working as well as it should. Now it is searching for the network.
.Hello noodles074!
Let's get your device working again! It's possible that your device just needs to be reprovisioned on our network. Please go to Settings>General>Reset>Subscriber Services>Reprovision Account. This may take several minutes. After allowing about 5 minutes for completion, please power your iPad off and back on, and test it again. Let us know if this takes care of it!
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Running 10.6.8. Trying to open and view contents of a CD (of an MRI) and getting message 'This program cannot be run in DOS mode' Is there a way? Thanks for the help.
Go to the support site for the provider of the MRI software.
Sounds like it windows/PC. I have ran across that for the CDs that veterinarians provide for digital x-rays.
I would try on a PC or on yuur Mac with Windows via BootCamp or a virtual machine like VirtualBox -
I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?
An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad? -
All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.
-
I have an iPod Video. (30GB 5th gen) The headphone jack only works if I push the headphone cable input to one side and hold it t here. If I leave it alone it either doesnt play at all or I hear a crackling sound. Any suggestions? Thanks.
There are threads ongoing on similar topics. This is not a suitable topic for this forum.
I will pass on any comments from the other threads and original post in this one, but I'm closing this topic and any further petitions like this as it will just result in "Creative-bashing" and unproducti've comments.
Cat -
I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?
You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.
-
Panoramas in CC 2014 are darkened on one side and too light on the opposite side.
I have both Photoshop CC and Photoshop CC 2014 on my MacBook Pro.
When sending images from Lightroom for merge ring to panorama and CC 2014 is open, the final product is different from what happens in the CC version. The final pano is severely darker on one side and somewhat too light on the opposite side of the panorama.
I should mention that I used Lightroom to color corrected the images used. I used RAW images from my Canon Rebel xTi and all the images are equally lit (or close to it.)
If Photoshop CC is open, and I send the images to merge to Panorama from Lightroom, the final pano is fine and consistent in lighting across the panorama.
Anyone else experiencing this issue?
Here are my specs:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro11,3
Processor Name: Intel Core i7
Processor Speed: 2.3 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP112.0138.B02
SMC Version (system): 2.19f3I am having this exact problem and it is driving me crazy. I have to keep switching workspaces to see any, but sometimes they all disappear.
Restarting AI does not seem to make a difference.
Any help or tips, other than uninstalling and reinstalling would be appreciated. -
Count moving object (Inter the ROI from one side and leave ROI from other side)
Hello All
I want to design program that can counting moving object that inter ROI from one side and come out from the other side, I want to give each object ID number
I have design a program that compare between object distances from one frame to the next frame, but the program efficiency is very low
If any one can give me a sample code that I can use or modify it to suite my applicationHello,
you will find the code in the attachment (saved for LV2013). There is a longer delay inside the loop, remove it for efficiency.
Roughly measuring the time to read an image, the processing takes ~8 ms on my computer (~500x200 image resolution). That is ~125 samples/images per second. Is this not fast enough for you? Considering better image resolution, the time is of course increased.
My specifications:
Core i7 3632QM
6 Gb RAM
Win 7 x64 (Labview x86 though).
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."
Attachments:
IDMovingObjects.zip 64 KB -
Hi, my current plans and products include Creative Cloud Photography plan (one-year) and Creative Cloud single-app membership for Photoshop (one-year), I only use photoshop occasionally and for very basic things, are these two plans required for basic photoshop use or am I able to go with one or the other ?
PS is part of the photography plan, so your single app plan is redundant.
Mylenium -
hi I got photoshop cc and want to take if of my one computer and put if on a other computer with a different email add
Hello cmc313,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 10 for Mac: Consolidate your iTunes library
http://support.apple.com/kb/ph990
You can consolidate all the files in your library in the iTunes folder so that, for example, it’s easier to move your library to a new computer.
Best of luck,
Mario -
I am unable to print cd covers. All I get is the songlist on one side and a black space where the picture should be. Any suggestions?
Thanks Bob.
I am thinking along the same line.
It's interesting that some of the unaffected graphics in the document come up as embedded, but some are just placed there with no link information.
I guess it's just a matter of how the original graphic was treated or saved. -
My daughter made an iMovie project using picures from her Camera Roll and then delted the pictures from her camera roll and now she can not export the project. Does anyone know of a way to still export this project?
jkrijgsman wrote:
Does anyone have a good workaround for burning a DVD from an iMovie project now that iDVD is no longer around?
There's Toast.
http://www.roxio.com/enu/products/toast/titanium/
$79.99
Final Cut Pro X will also burn DVDs.
$299.99
How large is your movie? Is it possible that you could output it as a QuickTime file and then burn that as a data DVD? Is uploading to YouTube an option?
Matt -
my will not do anything and it has a picture of the usb cable and the itunes logo on the screen
Your iPhone is telling you you need to restore it using iTunes on a computer. Follow the instructions below.
Use iTunes to restore your iOS device to factory settings - Apple Support -
when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System
Maybe you are looking for
-
Adl quits unexpectedly - while debugging AIR app in Flash Builder 4.5
the crash scenario: - i'm debugging an AIR app, things are running fine - my app is a media rotator and i've set it up to load in images, videos, sounds, and swfs (all good no problems there) - the original was built for AIR 2.6 and us
-
Bulk Fetch From an Oracle Sequence
I am trying to get a range of sequence values from an Oracle sequence. I am using the option as show below using query SELECT SEQUENCE_NAME.NEXTVAL FROM SYS.DUAL CONNECT BY LEVEL <= 10. The above SQL gets 10 sequence value. I just wanted to to check,
-
OLAP server uses a lot of memory
Hello Experts, We are having a BPC Microsoft multi server environment. The application serv
-
Error -42408....What does this mean??
Error -42408....What does this mean??
-
Add a field in BP_BPbT/accountopportunities
Hi guys, I need to include a new column in this component. when i create a new element in the attributes with the wizard appears the builopportunity bol entity and it has no relations to navigate to the attribute i want to show. Any idea? thanks jon