After restart, Macbook Pro is on, but screen is not.

When ever I do a restart on my MBP, it starts up, the greeting sound chimes, but the screen does not come on. If i start it from when it is completely shut down, it does not have the problem. I end up having to hold down the power button to hard boot it, which, I know is not a very good idea, but I cannot figure out how to shut it down gracefully.
The most recent event happened when I installed Snow Leopard on the MBP and then used system update to install software updates. It did the install and then went to restart, and the sounds came on, the keyboard lit up, but the screen was "off". I tried typing keys, using commandoptionesc but nothing. Eventually, when hitting the return key, I was getting that sound when you try do to something but it does not want to let you, the "dun" sound.
I had the MBP in to see the genius bar last weekend and they said nothing appeared to be wrong in the diagnostic.
I have to update my safari to 5.0.3 but I don't want to hard boot again tonight.
Any help or thoughts would be greatly appreciated.
Thank you.

have you tried a SMC reset or NVRAM reset?
Have you installed all the software updates? when the issue happens, if you shine a light on the screen can you make out the desktop or any thing? if so, if you press the brightness up button, dose it show the brightness at 100%? If you move the display like your opening/ closing the computer dose the display flicker?
to try a more graceful shutdown. if the computer is at the desktop. you might be able to shutdown the computer by pressing the power button, wait a few seconds, then press the return key.
-tt

Similar Messages

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao.

I received a macbook pro in april but it has not any optical drive although it was included in the order form. What should I do?

i received a macbook pro in april but it has not any optical drive although it was included in the order form. What should I do?

I now the place but it is my first time to work with mac and no body is here to help me and i should figure it out by myself. The slot looks closed with the similar color as aluminum so i thought it is blocked. But in system info i saw that there is a drive on my macpro so i test a cd to insert and .

HT1338 MacBook Pro 13.3: Desktop screen will not come up when turned on. Screen is blank except for an icon of a folder with a question mark on it, in the middle of an otherwise blank screen, laptop making a clicking noise.

My MacBook Pro 13.3 MAC OS X v10.7 laptop will not come up. Blank screen comes up, no color/desktop, etc., only an icon of a folder in the middle of the screen with a question mark on the folder. Laptop making a clicking noise. Suggestions? Thanks!

It's under warranty. Take it in to have Apple fix it.
The "flashing ?" means the machine can't find the start up disk. The clicking noise is a give away that the drive is damaged.

I have a great number of Hi8 video tapes and I would like to burn them onto CDs through MacBook Pro (ME665LL/A), but I do not know how to transfer those footage into Mac. What would you recommend?

Hello everybody! My question is; my parents and I have a great number of video tapes (Hi8 and mini DV) and since I purchased a MacBook Pro (ME665LL/A) I would like to burn them onto CDs, but I do not know how to transfer those footage into Mac. What would you recommend(it can be a software, a hardware or combination of both)? By the way, I also purchased an external DVD-RW(Asus SDRW-08D2S) separately.

Just Google "convert hi8 to dvd" and you'll find a number of software/hardware combinations that will allow you to do what you want. One important piece of the puzzle is whether or not you still have access to the video recorder(s) that the movies were shot on.
Good luck,
Clinton

MacBook Pro 10.5.2 Screen does not wake from sleep

This is probably the 80th time this issue has been posted.
I am hoping someone at Apple or otherwise can give me an answer on it.
What is the deal with this? Why can't my Macbook wake properly?
I thought this stuff was supposed to be "Reliable" and "easy to use" ?
I love OS X, but this wake from sleep issue is making me second guess my decision to switch.

I've been experiencing this issue 2-3 times a day, and it bugs the **** out of me.
I've followed the steps on the link provided.
I note there is no noise or visual indicator to suggest the reset took place (possibly because tehre is no power source there?) but I'll report back if I have any further hangs on the screen when waking up.
Cheers!

I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and ican't access mac or win 7 what should I do i cant format it because i dont have a backup

I tried to install windows 7 in my macbook pro late 2011 but i tried to create partions after it installed and it turn to dynamic disks and i can't access mac or win 7 what should I do i cant format it because i dont have a backup

It's not that you can't format it because you have no backup, it's because you'll lose everything when you do. Lesson learned. Always have a backup.

I am thinking of being a new macbook pro with retina but after reading the problems with overheating would i be better of buying a dell ??

i am thinking of buying a macbook pro retina 15 but after reading reports of this overheating am i better of buying a dell ?? i already have a imac that has started to overheat when put to sleep unless i close safari down.

Good grief no. I've just done a consulting job that involved Dells, and if you think there are some issues with Apple, wait until you try to deal with Dell. The tech support is awful, they transfer you 4 times then hang up. The product is marginal at best. Google that if you want confirmation.
While Apple machines have had some issues on specific models, for the most part my experience has been very favorable. Especially if you have Applecare. Take the computer in if you have a problem and let the Genius Bar fix it for you.
Your "overheating" issues are probably due to something like Flash running in the background, which just continues to grow in size and suck up machine resources the longer it's on.

My MACBOOK pro comes on but had a blank screen and the circle keeps spinning- not connecting

My MacBook Pro comes on but nothing displays , just a blank screen with the apple logo and a spinning wheel? How do I get the screen display back?

Start with this trouble shooting guide:
https://discussions.apple.com/docs/DOC-5282
It would be helpful if you provided the EXACT model MBP you have and the OSX.
Ciao.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.

My Macbook Pro has a black screen when running in Bootcamp Windows 7. Since I updated the mac side my windows side now starts up with completely black screen - no prompt, nothing, Cap keys still light up as does mouse and DVD drive seems to run.
Will not show up in safe mode, will not show when started from Windows 7 DVD.
I suspect the Mac update wiped out my PC video drivers but can not think of a way to re-install?
Can see the PC volume from Mac side with files.
I've looked at all the online solutions so far and have tried most of them without success. Please help!
Specs:
2009 Macbook Pro, 3.06 GHz Intel 2 core, Max 10.6.8.
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          3.06 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Serial Number (system):          7302300GANE
Hardware UUID:          B2D4B4B4-CD92-5C7A-BDC2-527D30DD8DF3
Sudden Motion Sensor:
State:          Enabled

EDIT: RESOLVED
For anyone else who finds their way here like I did, this link did it for me: https://forums.geforce.com/default/topic/527599/windows-8-issues-solved-please-r ead-if-you-39-re-having-black-screen-and-or-flickering-/
Specifically, the posts by Dunsany and valkyr did the trick. I booted in safe mode, uninstalled and deleted the Nvidia driver, disabled automatic driver installation, and restarted normally. I then manually downloaded and installed the previous Nvidia driver for my graphics card (which at the time of this writing was 335.23, rather than the latest which was 337.88), and everything is now bueno!
Two hiccoughs along the way: First, when I tried to uninstall the Nvidia driver the first time, when I restarted I got the login screen (which was a good sign), but it quickly went black again. I powered down, restarted in safe mode again, and repeated the uninstallation process, and it worked the second time. Second, when I started the manual install of the 335.23 driver, the computer played a sound similar to the one for disconnecting a USB device, and the screen went black. I'd seen a lot about trying to increase the brightness (though it hadn't worked up to this point; but if you haven't tried it yet, might as well); I tried it, and it worked! So far I'm back up and running. [/fingers crossed]
Hope this helps someone else!

I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

I have both a MacBook Pro and macair but the pro won't let me in I think it something to do with hard disc or permissions as it says system profiler in utilities , if anyone could help I'd be very grateful

Restart the MBP and immediately hold the option key down. Release the key when you see the Apple logo. The computer will boot and show you a screen with two hard drive icons.
Select Recovery and hit Return.
On the new screen, select Disk Utility and hit Return.
In DU do this:
In the list at the left, select the name of your hard drive. (Be sure to select the name that’s indented to the right in the list, not an item at the far left.)
Click First Aid.
If Disk Utility tells you the disk is about to fail, back it up and replace it. You can’t repair it.
Click Repair Disk.
When that is done, click Repair Permissions. Be patient!
When that is done, quit DU and restart in the usual way.

My macbook pro went from startup screen to grey vertical stripes

my macbook pro went from startup screen to grey vertical stripes with a bit of flashing. Force quit twice and it is still doing it. Had a bit of problem last time I started it with flashing screen, but it settled. After leaving it on screen went black (as usual) and on waking had desktop up but continued to flash. Any suggestions?

Hi there Lochside,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displayshttp://support.apple.com/kb/ht1573
-Griff W.

After upgrading macbook pro from mountain lion to mavericks computer performance slowdown

after upgrading macbook pro from mountain lion to mavericks computer performance slowdown

Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Macbook pro-Freezes with black screen at start up.

Macbook pro-Freezes with black screen at start up. I've tried inserting the Mac OS X install disc to run the hardware test(Restart and hold down D), But it still does nothing. Just the black screen. Now I can't get the disc out. I've tried holding down the track pad key upon start up but that doesn't work neither.
What do I do??? Please help.

Remove the battery to find your serial number in the battery bay. Then you can look your MBP up on EveryMac.com:
http://www.everymac.com/ultimate-mac-lookup/
That will give you all the information on your Mac.
This is assuming that you have the MBP with the removable battery and not the unibody. The unibody has different graphic chips.
Good luck!
Message was edited by: S.U.

My MacBook Pro shows a grey screen at start-up how do I fix this problem?

My MacBook Pro shows a grey screen when I try to login and won't go onto my homepage. Why has this happened and how do I fix it?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

After restart, Macbook Pro is on, but screen is not.

Similar Messages

Maybe you are looking for