After restart only one OWSM server agent is installed

I have created two OWSM server agents. One for the home container, the other for a custom container. (SOA Suite 10.1.3.3 - Basic install)
Whenever the Application Server is restarted, only the home container's server agent remains installed. I have to run wsmadmin.sh again to install the second agent before the custom container services are accessible again.
Is there any way to avoid having to do this?

Yes, there is a server agent for weblogic, see http://www.oracle.com/technology/software/products/web-services-manager/index.html to download it (see Third-Party Server Agents). The zip file also contains a pdf about the installation.
Kind Regards,
Andre

Similar Messages

OWSM server agent for BPEL process in Weblogic

Hello,
We are trying to protect a BPEL process (in Weblogic) with a OWSM server agent, but we couldn't find clear guidelines on that.
OWSM 10.1.3.x is in one machine, and Oracle BPEL 10.1.3.x is in another, with Weblogic 9.2.
Can anyone give us instructions or tips on how to do this, considering this scenario?
Thanks a lot.
Daniel Viero.

Dave, Andre,
It's unfortunate that you were given incorrect information.
Let's take this issue offline by contacting me directly.
OWSM agent support for .NET was taken out as .NET was going through multiple revisions while 10.1.3.1 was being developed, and the old agent wasn't compatible with the new .NET versions; and there were resource restrictions on our part to keep up with the new version support.
While on this topic, I would like to hear from you and others what their thoughts are around this kind of support in a future release.
1. We could add back .NET agent (similar to 4.0.3)
2. We could manage the policies for .NET through Oracle Enterprise Manager while letting the .NET framework enforce them. This will allow for centralized management of policies, while leveraging the security stack of .NET for enforcement.
Which approach would you prefer?
Thanks,
Vikas Jain
http://ws-security.blogspot.com

BPEL Web Service with OWSM Server Agent NOT AUTHENTICATING

I have deployed OWSM Server Agent to enable WS-Security Username/Password Authentication following the steps in the below URL.
http://www.oracle.com/technology/obe/fusion_middleware/owsm/secure%20soa/securing%20soa%20with%20owsm.htm
Section: Creating and Installing an Oracle WSM Server Agent
The OWSM agent configuration is working fine with individual Web Services.
For BPEL, the authentication is not happening if we call the default endpoint from JAVA proxy or Soap UI e.g
http://host.domainame:7777/orabpel/bpelprocess1/050101 - Authenticates as per the OWSM policy and WORKS FINE
http://host.domainame:7777/orabpel/bpelprocess1 - Executes the process WITHOUT authenticating
Any help would be appreciated.
Thanks
Shehzad

Did you resolve this issue ? We are having same issue with one of our BPEL process ........ any help would be highly appreciated .....
Thanks in Advance

Work Items to PR Agents (Only one of two agents received)

Dear all,
I am facing a problem like this:
In my PR Workflow, the task TS00007986 is assigned agents by position. There is one position applied for a particular release strategy and there are two agents under this position.
Now, there is one PR created, it went to the correct release strategy and thus sent to the correct agent. However, only one of the agent is receiving that work item while the other don't. In another words, instead of sending to both the agents, only one received.
In SWEL, the possible agents are showing both agents' names, but the icon "In User's Inbox" is only appearing on one of the agent.
I would like to know, what would be the possible error for this and in such cases, how could I trace the errors?
Thank you very much in all advances.

Here's an update on this issue:
For example, the two agents are Agent A and Agent B.
I think Agent A and Agent B both received the work items. However, Agent A executed the work item but later canceled the action without processing the work item (approved or rejected the PR). When Agent A executed the work item, the same work item would be removed from Agent B's inbox, but it is still in Agent A's inbox.
The problem is, the work item has yet to be processed. In this case, how this issue should be solved (only processed work item is removed from all the agents' inbox)?
Thank you very much.

One sql server agent job suspend

One sql server agent job--run full backup of one database is suspended from activity monitor.
How to find why it is suspended and troubleshoot?

"Suspended" is a common status for a thread. It indicates the thread is waiting on an external resource, which backups often are
Check few things:
1. Database size, how much backup is completed from below command and location where backup files are being placed
select session_id,command, percent_complete
from sys.dm_exec_requests
If that on network than might be due to slow netword backup take some time.
2. Check job history, expected
completion time of backup job and also if any change in the I/O and CPU time for the SPID
3.Check wait type of suspended spid, SQL server and event viewer logs. If any I/O issue on the server. Like disk responding slowly that might be a cause of delay.
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Load balancing with only one Real Server on CSM

Other than create a VSERVER with only one real server in it - is there a way of load balancing when you have only one real server now and may be additional servers to be added later?

the only way is to use the vserver.
Gilles.

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

OWSM Server Agent custom steps

Can someone please lead me to a document and/or provide instructions that detail how to configure a custom step (like the one in C:\product\10.1.3.1\OracleAS_1\owsm\samples\customsteps) into an existing server agent policy as one of the pipeline steps. It's not obvious which option it is in the "Step Template" drop-down menu; unless I'm missing something; I'm also thinking the custom step (code/package) itself is a template and needs to be configured so that it appears in the pipeline "Step Template" drop-down.
Thanks in advance!

Found it.
http://www.oracle.com/technology/obe/fusion_middleware/owsm/custom%20steps/custom%20steps.htm

OWSM server agent installation

Is it possible to install WSM server agents in other oc4j instances than the home instance? How? We've tried to find an option in the agent.properties, but no luck... Worse still, the installation script depends on libraries in the home instance for communicating with opmn.... The documentation only mentions changing the property file...

See this thread for the solution: How to secure web service deployed on a different servers using OWSM?

Photosmart C7280 locks up after printing only one page

Recently, my Photosmart C7280 has started locking up after printing only about one page of any document. The LCD display just says, "printing....", and the only way I've found to clear it is to unlug the printer from the mains. It happily prints multiple copies of single page documents, but the only way to print muli-page documents is to do them one page at a time.
I have the same problem from both my desktop and laptop.

Thank you for the suggestion. unfortunately, it did not help with this problem. I ran the utility and it indicated that there were no problems with the printer.
it seems likely to me that this is some sort of memory or buffering problem within the printer itself. However, I can't find any options on the printer's menu to clear the buffer or internal memory. I have tried 'restore factory settings' but this made no difference.
The problem appears to be getting worse - while printing multiple copies of a single page document today, the printer locked up after just 3 copies. I had to rpint 20 copies by printing 3 copies several times over.
Thanks,
Anne

After booting only one workspace on my second monitor

I got a MAC PRO 5.1 with 2 screens connected.
Problem after rebooting yosemite, on my second screen only one workspace is left. All others are at the first screen.
I also can't tell applications to open at a specific screen. After reboot the screen information is lost.

In Mac OS X, if a screen disappears -- all the items on it are moved so that at least some part of each window is on another screen so that it is not "lost" on a screen that is off. This problem sounds similar. Perhaps for some reason, your Mac thinks a screen has disappeared, and your workspaces are moved.
If this is the case, I thought of some workarounds that may prevent that from happening:
1) If you do not already use a "regular" user account (as opposed to an Admin account), I suggest you create a new Admin account, log in to it, and use it to demote your daily-use account to a regular account. Then cancel auto-login and endure the login screen. [You will also have to enter the Admin username and password when installing new software, but your Mac will be slightly more secure that way.]
This moves the creation of your workspaces away from the Startup sequence, and may mean the screens are stable by the time you log in and your workspaces will not be changed.
2) reverse which screen is the primary screen, in hopes that it (and its workspaces) will be maintained instead of dropping out

Update server classes without restarting sun one web server 6.1

hi,
I'm facing a problem in updating server classes on sun one web server 6.1. i did not deploy any application and we are using simple jdbc+jsp approach.i write a class for db connections and now whenever i made some changes in it i must have to restart web server for changes to take effect. I also delete class files from classcache folder but it doesn't work.
my class is placed on /opt/ and this path is also placed in web server class paths.
i do not want to restart web server again and again. can some one tell me how to solve this problem.
Regards,
Kashif.

if you just change your jsp files, you don't need to restart WebServer. WS will automatically recompile your jsps when it find the changes.
You may also use reconfig command to reload server.

How to deploy a MDBean into cluster with only one JMS server instance running on one of the cluster servers

          I am trying to deploy a MDBean in my cluster ( two servers). The MDBean requires
          the destinestion has to each cluster server. It means that I have to deploy my
          JMS server over the cluster. This will result multiple destinations (queue or
          topic) are created.
          Is there a way to run one JMS server with a clustered MDBean?
          Thanks,
          Taohe


Check out my posting from 4-3 in this thread.
http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=5&jump=true
I think I may have answered your question before you asked it.
In that example I use the picture control to manipulate a bunch of rectangular images of booleans.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Sun One Web Server 6.1 | Install wildcard certificate

Hello everyone. I am new to this forum. I'll start off by saying that I am very "green" with the Sun One Web Server as well.
My question/problem pertains to installing a wildcard certificate on our server. I am not able to find good documentation on this, so I am hoping that some of you could provide some guidance or, better yet, a link to documentation specifically for the Sun One Web Server 6.1.

There is no difference with installing a wildcard or any other certificate. You simply create a CSR and specify an asterix instead of the hostname followed by a . and your domainname for the subject, send it to a CA and get back a certificate that you import.

Server unresponsive after restarting, only sometimes

Hello,
I've been having an issue that will only sometimes occur after a scheduled server restart. My SBS 2011 Essentials server is configured to restart every Sunday so updates will apply. Most restarts occur normally and the server comes back up fine. However,
sometimes the server will restart and then enter an unresponsive state.
What I mean by unresponsive state is:
- The power light on the server box is on, and the Ethernet status LEDs at the Ethernet connection are active.
- The server will not perform its DHCP duties, causing all workstations to hang while trying to start up (Ethernet cable pull works around this and allows login with machine local users)
- Setting a static IP on a workstation and attempting to remote desktop or even ping the server fails.
- Physically using the servers monitor, keyboard and mouse to login fails, it will hang attempting to login to the administrator user.
The only way we have found to get the server up again is to restart it. Pressing the power button and waiting does not shut down the server at all, so, undesirably, we have to hold the power button down to do a hard power off.
After this happens I comb through the event log and look for issues but nothing really stands out, googling the event IDs usually just shows the things I find to be symptoms of the root cause, but I can never find the root cause. Interestingly, the event
log is completely clear from about 5 minutes after scheduled restart to the time we come in on Monday morning and have to give it a kick. Eg, Server restarts at 6am Sunday, last event log item is 6:05am and then nothing, until 7:30am Monday morning when we've
given it a hard power cycle.
Any ideas what I can look at to chase this down?

After some deeper parsing of the event log I found that two virtual box VMs starting as services were terminating for most startups, instead of starting well. I've added these two services to delay automatic start and they no longer terminate on the first
start.
If anyone wants to analyse their startup events here's the script I wrote: http://codepad.org/6rUvYRdb
I'm not sure if this has/will fix the problem, since it only randomly happens on restart and we restart once a week.
If it happens again does anyone know what would be the best way to shutdown the computer? As I said above, pressing the power button does nothing, and it only responds to having the power button held down to do an abrupt power off.

After restart only one OWSM server agent is installed

Similar Messages

Maybe you are looking for