After restarting the Services, Foundation service is not starting

Hi All,
Recently, i have applied patch and restarted the services, later found that foundation services is not starting. I have referred the logs and it showing below error.
<Apr 29, 2015 7:45:30 PM PDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Apr 29, 2015 7:45:31 PM PDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA= from the file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
Enter username to boot WebLogic server:
I have logged to Weblogic server and checked, the foundation service is not started.
We dont have the backup of installation folder.
I manually edited the user name and password and started the services, but no luck.
Do any one idea about processBootProperties.cmd, shall i trigger it to get the new boot.properties.
Please suggest.
Thanks

Hi all,
I manually enter the credential for the Web logic server and started the services. It worked out.
I did the same first, but i did some typo error in credential, it killed me for more that 1 hour... ):
Thanks

Similar Messages

  • Site does not load after some minutes of creation or after restart the server

    Hello,
    I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
    Backed up the production web application's content database: Prod_WSS_ContentDB
    Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
    Created a new web application in test environment with a new content database.
    Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
    Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
    Mount the Prod_WSS_ContentDB databe to the web application with powershell:
    Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
    Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
    and the site loads exactly as the production environment.
    But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
    http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
    as expected, but the site does not load, the browser just show a complety blank page.
    The Central Administration site loads normally.
    Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
    then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
    For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve  this?
    The error is:
    Log Name:      Application
    Source:        Microsoft-SharePoint Products-SharePoint Foundation
    Date:          6/27/2014 2:44:22 PM
    Event ID:      5586
    Task Category: Database
    Level:         Error
    Keywords:      
    User:          UCETEST\spaccount
    Computer:      TESTSP01.ucetest.edu.do
    Description:
    Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
    A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
        <EventID>5586</EventID>
        <Version>15</Version>
        <Level>2</Level>
        <Task>3</Task>
        <Opcode>0</Opcode>
        <Keywords>0x4000000000000000</Keywords>
        <TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
        <EventRecordID>4742</EventRecordID>
        <Correlation />
        <Execution ProcessID="1688" ThreadID="1692" />
        <Channel>Application</Channel>
        <Computer>TESTSP01.ucetest.edu.do</Computer>
        <Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
      </System>
      <EventData>
        <Data Name="int0">-2146893055</Data>
        <Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
      </EventData>
    </Event>
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

    Hi,
    According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
    Please make sure you create a test environment for existing production site correctly.
    Here are some great articles for your reference:
    Moving content between SharePoint environments
    Copy SharePoint production data to a test environment
    Build a SharePoint 2010 Test/Development Farm
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support
    Hello Linda Li,
    I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
    Melvintt
    MCTS, Windows Server 2008 R2: Network Infrastructure
    MCTS, Windows Server 2008 R2: Active Directory, Configuring

  • When i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.

    when i plug my ipod in it says ipod cant be read cuz the apple mobile device is not started.And i went to services and apple mobile device properties and start stops in the middle.and its on automatic.and there isnt a stop button.when i click start it says the apple mobile device services stopped in the middle then stopped.it said some services stop in the middle if not used by other services.and i just updated itunes before all a this and ever since ive had errors.

    Have you looked at this article:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT201401 s4 iPhone after replacing the screen (no service - Contact sim-No connection wi-fi)

    s4 iPhone after replacing the screen (no service - Contact sim-No connection wi-fi) and the device was running before the replacement.
    What is the solution?
    Note I'm not good at speaking in English directly, but used an interpreter because
    I need run two

    2-
    And sure that the card is working properly and also there is a Wi-Fi network

  • After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
    2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

  • The Generic Service Component Container can not started

    The Generic Service Component Container can not started because the following errror in the log file
    Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
    Every thing else is working fine

    The following generic services can not be started
    Output Post Processor
    Generic Service Component Container
    Email Center Download Processor
    The log file contain the same error is as follow respectivily
    log of Output Post Processor
    Unable to initialize state monitor.
    oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
    =================================================================================
    Log for Generic Service Component Container
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.out until necessary parameters are retrieved for Logger to be properly started.
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsm.GSMSvcComponentContainer.initializeStateMachine() : BEGIN
    LOG_ID_UNKNOWN : oracle.apps.fnd.cp.gsc.SvcComponentContainer.getNewWorkflowContext() : BEGIN
    Could not start Service Component Container because an unexpected RuntimeException or other Throwable occurred -> oracle.apps.fnd.common.AppsException: oracle.apps.fnd.common.PoolException: Not able to create new database connection: FND
    ============================================================================================================

  • HT1349 when i plug my iphone into my laptop it keeps saying "this service cannot be used as the apple as the apple mobile device is not started" ????

    when i plug my iphone into my laptop to sync with my itunes its keeps saying "this iphone cannot be used because the apple mobile devise is not started" anybody know why this is??/

    Type "apple mobile device service" into the search bar at the top of this page by "Support" and read the resulting articles.

  • After enabling the archivelog, DB control is not launching, please help

    I am using oracle 11G
    after enabling the archivelog, DB control is not launching, please help

    553ad454-5ce9-4515-bc7c-51c2e7fa3316 wrote:
    Thanks for your reply.
    I have enabled the Archivelog MODE for my database through DB control.
    after some time, DB control https://192.168.1.100:1158/em/console stops working & not opening.
    But I can able to loginto the sqlplus through command mode.
    please help
    Since you have used an IP in the EM's URL, there can be one more possibility besides this that the EM service has been stopped(as suggested by others already) . It may be a reason that EM  service is not up because the IP address has been changed due to a machine reboot. As 9/10 times, the IP addresses are assigned via DHCP  on home laptops and desktops, if this IP address is no longer there, the EM service won't be up. But before we shall come to know about this that whether this is indeed the reason, try the command-emctl status dbconsole and if it says, not running EM, emctl start dbconsole. Post the output of the commands.
    HTH
    Aman....

  • My ipad2 shuts down completely after I press the sleep button and does not start.... Help please

    My ipad2 shuts down completely after I press the sleep button and does not start.... Help please
    This started since the latest update!!!!!!!!!!!!!!

    Hi Alkaf,
    Welcome to Apple Support Communities.
    It sounds like your iPad will not turn on. Take a look at the iPhone article linked below, it provides tips that will help resolve power issues for both iPhones and iPads.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    -Jason

  • What mean that the sign of the GPS ( the arrow head) is always active although there isn't any application is opened and also after restart the phone

    What mean by, the sign of the GPS ( the arrow head) is always active although there isn't any application is opened and also after restart the phone still active

    Something is using location services. You can go into Settings, Privacy, Location Services, and see a list of what you have authorized for location services, and see a legend that tells what the display of the arrow head means and you should be able to compare it to the list to find out what app was using it.

  • I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

    I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
    Please confirm.
    iPhone 4, iOS 7

    Hello jayanand,
    You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • Repositories are invalid after restarting the MDM Server in MDM 7.1

    Hi SDNers,
    After I restarted the MDS server I am not able to logon to the repository. When I tried to connect to repository I am getting an error like "Repository Connect Failed and The MDM Repository is Invalid"
    I tired to delete but I am not able to delete also. While deleteing it is giving an error like  "MDM Repository is in Read Only Mode".
    So I am not able to Delete the repository also to create a new Repository.
    Any Help or Solution
    Thanks
    Kiran
    Edited by: Kiran on Apr 6, 2011 6:40 AM

    Kiran -
    some of the below ways you can check
    1. Check your mds.ini settings. and do unmount nad then mount the MDM server again. Try to Monitor the Authentication for Particular repositry which you want to connect to your MDM 7.1 server
    2. after checking the note 1325833. try restart database server first then MDM server.
    3. also try to check with Appropriate repository option once.
    HTH
    thx
    Deep

  • Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?

    Just yesterday I downloaded the newest update for iTunes, a few days before doing this I purchased music, but after doing the update my songs will not play. It shows a message that says this file cannot be located, what can I do to find the location?

    The path C:\users\owner\appdata\local\apple\apple software update\bonjour64.msi cannot be found. verify that you have access to this location and try again or try to find the installation package "bonjour64.msi" in a folder from which you can install the product bonjour.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on 25 June 2010. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

  • I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old.

    I have an iMac that I am running OSX 10.8.3 on.  I keep trying to install 10.8.4 but it will not install.  I tried updating and installing several times and it restarts the computer but it will not install the software.  My machine is about 8 months old so, it's in the newish range.  HELP!

    Sometimes the App Store version doesn't work correctly. In this case, install 10.8.4 with the Combo version > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US
    The Combo installer is the safest way to update OS X, and it allows you to update more than one computer with a single download

  • After the reboot, ssh demon is not starting up

    Hi Folks,
    After the reboot, ssh demon is not starting up in Solaris 9 server.
    1) Does any change in package?
    2) If it need to install the new package, sunfreeware seems to not active.
    # /etc/init.d/sshd start
    Starting SSHD
    :/# OpenSSL version mismatch. Built against 90702f, you have 9080cf
    :/# pkginfo | grep open
    application SMCossh openssh
    application SMCossl openssl
    :/# pkginfo -l SMCossh
    PKGINST: SMCossh
    NAME: openssh
    CATEGORY: application
    ARCH: sparc
    VERSION: 3.7.1p2
    BASEDIR: /usr/local
    VENDOR: The OpenSSH Group
    PSTAMP: Steve Christensen
    INSTDATE: Jun 22 2007 15:20
    EMAIL: [email protected]
    STATUS: completely installed
    FILES: 51 installed pathnames
    10 shared pathnames
    11 directories
    10 executables
    1 setuid/setgid executables
    3059 blocks used (approx)
    :/# pkginfo -l SMCossl
    PKGINST: SMCossl
    NAME: openssl
    CATEGORY: application
    ARCH: sparc
    VERSION: 0.9.8l
    BASEDIR: /usr/local
    VENDOR: The OpenSSL Group
    PSTAMP: Steve Christensen
    INSTDATE: Jan 10 2012 10:52
    EMAIL: [email protected]
    STATUS: completely installed
    FILES: 1563 installed pathnames
    1 shared pathnames
    42 directories
    27 executables
    23412 blocks used (approx)

    Clearly it's telling you what is wrong:
    Starting SSHD
    :/# OpenSSL version mismatch. Built against 90702f, you have 9080cf
    Why not use the ssh that comes with Solaris 9 instead of the opensource version?
    SUNWsshdr and SUNWsshdu or the Secure Shell Cluster (SUNWCssh):
    http://docs.oracle.com/cd/E19683-01/817-0488/installbugs-222/index.html

  • Changes in Bundle.js file are disappear after restarting the UCM

    Good Day,
    I add some javascript code in bundle.js file within the following path: domain_home\ucm\cs\weblayout\resources\bundle.js .
    the changes are reflected fine on the UCM, but once the UCM Server restated the changes are gone and the file revert back as is; without my changes.
    the code that i want to add is:
    if ((typeof Range !== 'undefined') && !Range.prototype.createContextualFragment) {
    Range.prototype.createContextualFragment = function(html) {
    var frag = document.createDocumentFragment();
    var div = document.createElement('div');
    frag.appendChild(div);
    div.outerHTML = html;
    return frag;
    i want to add it because i have a javascript error like this: Object doesn't support property or method 'createContextualFragment', this erro occured when the used version of Internet Explorer is V.9. ; no javascript errors appears on Version 8. when i add this piece of javascript to the bundle.js file, it the error is gone and everything goes fine, but as i said earlier after restarting the UCM the added javascript code is gone and disappear from the bundle.js file.
    For that reason i want to ask, is there is a way to keep my code and stay as is even after restarting? Or is the file uploaded on restart from another path?
    Any Suggestions?

    This is actually quite simple to explain:
    - domain_home\ucm\cs\weblayout\resources is a directory that holds runtime version of resources
    - if you want to make your changes persistent, you will need to do it in a source directory. In 11g there are two source directories; one for standard components, and the other for custom ones. You should use the latter
    - in fact, if you create a custom component with Component Wizard, make your changes there and activate the component, you should be done. The only another thing you should pay attention to is the loadOrder parameter of your resource - it should be higher to get applied.
    For more details, see http://docs.oracle.com/cd/E23943_01/doc.1111/e10807/part4_customize_comp.htm#sthref522

Maybe you are looking for

  • Converting DOC to PDF - will not open

    I have the Adobe creative suite 4 Design Standard, and with that comes Adobe Acrobat Pro ( I updated the newest version 9.2.0). I have been using this program for two years and have never had any issues. Then my computer was stolen last week, I got m

  • On SSRS Export or Print, Select the first 9 columns out of 15 columns

    Hello Every1, My Greetings for the day!!! I am Hiren Parikh from India. I am developing a SSRS report (Tablix) which has 15 columns. While developing the report, I have come a crossed a strange requirement. When the reports gets loaded in SSRS Previe

  • Clearing downpayment during invoicing EA19

    Dear Experts - I  have posted a down payment  for some consumer - I WANT clearing this  down payment during billing EA19 Desired result was that during invoicing, the system would automatic clearing downpayment. Clearing variant assigned to R41 and R

  • New Payment file in DMEE, which is based on SWIFT u2013 MT100 format

    Hi All, I have to create a New Payment file in DMEE, which is based on SWIFT u2013 MT100 format for ING Bank. the customer has given file format specification for ING bank, also they have given the format they want in notepad. i am FI consultant, hav

  • Measure plsql execution time

    Hello dear teachers, i would be gratful for advice. I have materialized view that is refreshed with the dbms_mview procedure and it's scheduled through dbms_job. How could i measure that refresh execution time so i can for example query one table and