After restore, Pavilion a6250t appears to start then screen goes black.

Have tried F11 restore as well as restore from DVD. In bothe cases, The system restarts after retsoring the Windows partition, attempts to start Vista then screen goes black, while the CPU appears to be processing the restore. Suggestions?

XFX Radeon HD 5770 = PC only card, compatibility is not a guarantee
You realize there is EFI type firmware that makes a Mac a Mac? and PC even with "UEFI" don't require or use graphic cards, hence Apple vs PC
you know by going to Apple Store or a vendor like OWC or that says "Mac Pro" Compatible - you can find Apple hardware on Amazon for instance.
Or you buy from a vendor like MacVidCards that deals with GeForce cards (mostly if not exclusively) FOR Mac Pro.
And there are different options for 2008 vs older which is why it is important when you have lack of clarity and have one thread being thread-hijacked in two.
http://netkas.org
Has forum and more about 3rd party non-Apple AMD/Nvidia and support down the road or using off the shelf PC cards.

Similar Messages

Macbook early 08 starts then screen goes black

going to google

I had the same problem with mine MacBook never used gone back to Linux and freedom. Get rid of it apple is all overrated ijunk

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Trouble with mobile site. Displays for a second then screen goes black.

Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt

Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....

My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.

At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.

Computer won't start up after recent version of mountain lion. My power Mac was running extmely slow this morning, so i shut down to restart. As it is starting the screen goes black, says something about debugging with the word panic in parentheses. was

I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up. When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses. Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key. Apple logo comes on gray screen, icon keeps circling and nothing happens. This has happened three times in a row after shutting down and trying to restart. Any thoughts?

When verifying disk, said could not repair disk, back up as many files as possible then re format disk. Computer now doing Internet recovery. Should I. Do the following in this order
1 restore from back up on time machine
2 re install osx
These are the options coming up on osx utilities window

Imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

imac wont boot - i get a white screen with apple logo, and it loads to about 10%, then screen goes black

Hey there mtriest,
It sounds like you are unable to boot the iMac successfully as it keeps shutting down when you try to boot. I suggest the troubleshooting from the following article named:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Disconnect, test peripheral devices and network cables
Note: "Peripheral devices" refers to external devices other than what came with your Mac, such as hard drives, printers, or hubs that you connect via a USB or FireWire cable.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Disconnect all peripheral devices such as external hard drives or printers (leave only the display, a keyboard, and mouse connected).
Disconnect any Ethernet cables.
Start up your Mac.
If you can start up this way, one or more of your peripheral devices (or installed software related to the device) is probably causing the gray screen issue. Connect one device, then restart your Mac to test for the issue. Repeat the process until you locate the device at issue. Make sure the device is powered if it needs to be to operate correctly. Check with the manufacturer of the device for support or possible software driver or firmware updates that may be available for the device. Try a different cable with the device if possible (such as a different USB or FireWire cable).
Note: If you have multiple peripheral devices and the issue only occurs when they are all connected, but not when each device is the only peripheral connected, see the Additional Information section below.
If you are using a desktop Mac with a third-party keyboard and/or mouse device, and the issue still occurs, try starting up with an Apple keyboard and mouse connected instead. Try starting with no keyboard and mouse connected, then connect them after start up. Also, try a different USB port on your Mac.
If the gray screen issue persists with no devices connected, go to the next section (with the peripherals still disconnected).
Perform a Safe BootSimply performing a Safe Boot may resolve this issue.
Shut down your Mac. If necessary, hold your Mac's power button for several seconds to force it to power down.
Start your Mac, then immediately hold the Shift key. This performs a Safe Boot. Advanced tip: If you want to see the status of a Safe Boot as it progresses, you can hold Shift-Command-V during start up (instead of just Shift).
Note: A Safe Boot takes longer than a typical start up because it includes a disk check and other operations.
If your Mac starts up as expected, immediately try restarting.
If the Safe Boot does not work, or the restart after a successful Safe Boot does not work, go to the next section.
There is additional information in the article with further troubleshooting if needed.
Thank you for using Apple Support Communities.
Cheers,
Sterling

My macbook boots up get a screen picture then screen goes blank, when boots up I get the sound then a screen then screen goes black is this a battery problem or something else?

my macbook boots up, I get a screen picture then screen goes blank...I get the start up sound, then a picture, then the screen goes blank but computer is still on..does anyone know what the problem is...do I need a new battery or am i just screwed.

Hello nosaint1961,
It sounds like you are unable to successfully boot your computer to your desktop. I would use the troubleshooting from the following article to help troubleshoot what is happening named:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/ts1367
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Thank you for using Apple Support Communities.
All the very best,
Sterling

Ringing problem, 3GS Rings, then screen goes black..?

Hey everyone, I didn't see this posted anywhere, Are any of you having this issue? My wife and I each have 3GS's, This happens ONLY when the phone is locked and a call is received. When the call is received, the phone rings and then after about 5 seconds of ringing the screen goes black but continues to ring.. We have to press the home button to bring the screen back up, then answer the call. I have had an original 2G and 3G phone before this S and neither of them did this.. Any help would be great!
-Jason

i too have the same issue, with 3gs also when i am in my inbox or evem while writing an e mail the screen just goes back to the main screen and loses all imput into the e mail,
in fact it does this at anytime in any app or program

None responsive ipod apple logo comes on then screen goes black

Ive not used ipod for a while .Now it wont charge apple logo comes on then screen goes black

After connecting to a charging source for hours try:
iOS: Not responding or does not turn on

Slide to unlock, then screen goes black

I have a glitchy 4 (dropped in water and call sound radomly starting coming through the mouthpiece speaker). I decided to replace with another iphone 4 so I took my old 4 back to factory settings and synced it for use as a game player for my youngest son. Ever since to that I have tried resyncing it as well as hard robooting it and the screen still goes black after I swipe the unlock button. Any suggestions please?
Thanks,
Jill

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe

Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

Macbook OSX 10.5.8 - switches on, makes the usual noise - then screen goes black. Is it dead?! Can't try anything at all as it simply won't stay on. Had a new battery 4 months ago too.

My old macbook switches on briefly, makes the usual sound - then goes black and silent. It has occasionally switched itself off recently - but then come back on again after a moment a few presses of the power button. It has a new battery 4 months ago after the previous one expanded....Given I can't get it to turn on I can't try anything. Should I go straight to Apple Genius bar?

Hi. Are you running 10.5.8 and do you have the install disk? You could try a pram reset. Hold down Command/Option/P/R key on startup for three chimes and continue boot. If you have the install disk, you could boot to it then use the disk utilities off it to check or repair your drive and permissions. If you have a newer operating system you may have a recovery partition.

ITunes Match says loading but then screen goes black and nothing happens

I've just subscribed to iTunes Match so I can have my music on my new iPad mini and I got my housemate to switch it on in the iTunes on the computer at home with all the music on (I'm away for work) and when I enable iTunes Match and open music it says loading iTunes Match and then just goes to a black screen with a white bar at the bottom and nothing loads, why isn't it work? do I need to do something in my main iTunes I was hoping it would just work with my Apple ID as I am away for work for 3 months and want my music now!
Thanks!

Don't DL Flash from web sites. If you have Adobe Flash installed it should be in System Preferences and you can find the latest version and download from there.
If you are installing for the first time,this is where to DL it.
http://get.adobe.com/flashplayer/

TS3274 load web page then screen goes black and reboots

hit safari icon.then connect to a web page then all of the sudden the screen shades out and reboots the unit

Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and clear History, Cookies and Data

After restore, Pavilion a6250t appears to start then screen goes black.

Similar Messages

Maybe you are looking for