After restoring, iPod won't work

So I have this 4 GB iPod mini that I got from my boyfriend and it was working perfectly fine...until I plugged it into my Macbook to upload my songs onto it. I reformatted the settings on the iPod from PC to Mac and uploaded my songs on it. Then I disconnected the iPod when it said it was safe to and now all that happens is the apple logo appears on the screen and then a folder with an exclamation point appears and won't let me get to the home screen. I have tried restoring the settings, I have re-downloaded iTunes, restarted my computer and have yet to find a solution to this problem. Is there anyone who has had similar problems? Is there a way I can fix this?

Try formatting the iPod (check WIndows Help to see how to format a drive) and then try restoring.

Similar Messages

After restoring iPod it stops syncing half way

After restoring iPod, it stops syncing while it is downloading music with an error message "Attempting to copy to the disk. iPod failed. The disc could not be read from or written to".
My music is less memory than what my iPod can hold.
What's up with this?
THX!

It's possible that your iPod's hard drive has started to fail. Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
Retracts: 889
Reallocs: 12
Pending Sectors: 0
PowerOn Hours: 2202
Start/Stops: 894
Temp: Current 24c
Temp: Min 10c
Temp: Max 50c
Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
*Reallocated Sectors Count*
Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
*Pending sector count*
Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
tt2

IPod won't work when iTrip is connect to car charger

When I connect my itrip to the car cigarette lighter the iPod won't work, i.e. it will plsay the current tune but the controls don't respond and it stops playing when the current tune ends. It works ok when I disconnect the power.
Ipod model M9244B version 2.3
Any ideas?

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem that indicates a hadware problem, likely a bad battery. Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

IPod won't work off the charger

My 4th Gen iPod won't work when it's not connected to the charger. As soon as you remove it from the power source it shuts down. I have updated to the latest iOS and it's been restored. This corrected the issue for about 24hrs then it was back to random shut down and now it won't work at all.
Suggestions or does it need to go visit an Apple Store ?

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore.

Updated my iPod touch 3rd gen to 5.0.1 from 4.3.2 and now the screen my iPod won't work anymore. I restored it, I backed it up and I held the power and Home buttons for the reboot and still nothing. I've been looking to see if any one had the same problem and one guy did but they tOld him it was his hardware, but I don't think it was because my friend was able to get it working but it would stop working again like in 10min. So, has anyone had the same problem and can help? Please, I will greatly apretiate it. :)

What do you mnean that the screen does not work?
When you touch the screen the iPod does not respond?
Nothing shows on the screen?
Or what?

IPOD won't work with SYNC in my new Ford Fusion

IPOD won't work with SYNC in my new Ford Fusion in the UBS port that is made for IPODs etc.
Older model IPOD
Any fixes?

I also had problems with iTunes 7 when it first came out, but 7.0.2 is working for me and seems to have fixed a lot of the problems. It's worth a try if you need iTunes 7 for your new iPod.

HT5569 My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated.

My computer is not updating to the new itunes 11.1. Is there a link that you can give me to update it specifically? Because my ipod won't work on my laptop unless itunes is updated. I unistalled the 11.0 version because when I tried to update it through itunes it wasn't working. HELPPPPPPPP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Try:
http://www.apple.com/itunes/download/
ALso maybe:
Trouble installing iTunes or QuickTime for Windows

Mission Control won't work after sleeping. Upon Start up it's fine, but after sleeping it won't work by track pad or keyboard.

Since updating, Mission Control won't work after sleeping. Upon Start up it's fine, but after sleeping it won't work by trackpad or keyboard. I'm sure I use Mission Control more than most, so it's really irritating for me.

No, the versions of iPhoto on the iPad and on OS X are totally different.
What Apple ID are you using for the Mac App Store? Who else has access to that Apple ID, or what possible other Apple IDs could be in use? It's possible you'll need to purchase iPhoto to get the upgrade, though I'd think Software Update should offer you the correct version.

After restoring ipod nano it wont sync with itunes. states error 13019 occured

after restoring ipod nano it wont sync with itunes. states error 13019 occured

I seem to recall that another user has this problem and found that it was because of some corrupted music files they were trying to sync over.
Try syncing smaller bunches of tracks till you come upon the ones that cause the error. You should be able to find out which ones are causing the trouble this way.
The other user said they used something called MP3Diags. I cannot vouch for this software at all, I have never used it.
I did a quick search on "how to repair MP3 files on Mac" and also found this:
http://triq.net/articles/mp3-validator-mac-os-x
i

HT1339 after restoring ipod nano how do I get tunes back if they are in my music library

after restoring ipod nano how do I get tunes back if they are in my music librbary- thanks

Configure the music to sync back over to your device from under its Music configuration tab. If your library is smaller than the capacity available on your Nano, you can set it to sync your entire music library by enabling the Sync Entire Library option from under this tab. Otherwies, you'll have to select only certain artists, albums, playlists, and genres.
See this article for more information.
iTunes: Syncing media content to iOS devices and iPod
B-rock

My 8GB iPod won't work after I clicked restore on iTunes?!

I clicked restore on itunes as my iPod had two/three lots of the same songs on it and i just wanted to wipe the memory and start again by putting all my albums on. Now it won't work as it says there was a problem with recovery and it's in safe mode and just keeps referring me to queries that are far too technical for me to understand. How could this happen?

It states an unknown error occurred (1) and shows a tab saying, more information. But despite restarting both my mac and iPod.....it still won't work and just has an apple icon on the iPod......

Third Gen ipod won't work or restore

My friend has an old ipod with the click wheel. I think it's third generation. He hasn't been able to turn it on, and when it is connected to the computer it isn't recognized in Itunes. A couple times, a message popped up that said it needed to be restored because it's corrupted, but we can't get the window to stay up to even restore it. We've also tried resetting it, but that won't work. The computers have the newest version of itunes. We've run diagnostics, but the ipod connection always fails. The ipod won't update or play music. An the apple icon appears, and then a folder icon pops up that says to go to support. If anyone has any ideas, please let me know. He doesn't have Apple Care.

I am having the same problem.
So you're saying the problem is with the USB?
If I go to the Apple Store they will have this "USB/Firewire" cable.
Thanks for your help!

Replacement IPOD won't work/restore/synch

I recvd a replacement (warranty) 5th gen IPod and it won't work. When connecting to iTunes I'm geting a meesage that I need to restore. I'm using the latest software (1.2.2) I've attempted to restore multiple times and get a message telling me it has been restroed and is retarting - then when it restarts it goes into a do not disconnect mode and seems to lock-up. Additionally, iTunes seems to stutter and lock-up on me.

I'm having an identical problem. The iPod was originally formatted for Mac so I try to run updater to UPDATE and RESTORE. UPDATE tells me that I am currently running the proper software. RESTORE fails and return's the "can't lock ipod" error. I have read through http://docs.info.apple.com/article.html?artnum=301305
about a zillion times and it's still no good. My iPod now shows the folder with exclamation mark icon and nothing else. I have installed and uninstalled multiple versions of Updater and iTunes. My PC only recognizes the iPod as a hard drive now. The iPod is completely blank (no menus, playlists etc.). My USB cable is working. HELP!

Please help! Ipod won't work with my itunes after plugged into MAC

Hi, I am brand new to my ipod and i plugged it into my PC to get it started, then i plugged it into a friends mac to get his songs- now when i plug it back into my computer it says it is linked to another itunes library and asks if i want to link it back to this one and replace all of the music. I do not want to loose all of the music but want it reconnected to my itunes with the music on my computer and taking the music on the ipod (from my friends itunes) into my itunes. What do i do? I apologize if this is something posted before,i couldn't find an answer. Please help!! thanks

That above article will not resolve the issue. It explaines it clearly in the article.
"Using an iPod formatted for Macintosh on a Windows computer is not supported. Using an iPod formatted for Windows on a Macintosh computer is not supported."
this means that it won't work with out a 3rd party tool. You HAVE to restore it if you take it between different OS. That document works only if your taking it between windows machines or all mac machines.

Help! iPod won't work or connect to XP

Please choose the appropriate forum for this topic. Thank you. All the music was erased off my 5G 30GB iPod Video last week for some reason (interestingly, the photos were still there). When connected to iTunes, it gave me an error message about needing to "reinstall the iPod software."
Today, I got a new hard drive and installed XP Pro on it. I connected the iPod via USB and the little taskbar bubble popped up saying "Found new hardware -- iPod." Next, I installed the iPod + iTunes software from the CD, restarted the PC and run iTunes. My PC and iTunes didn't indicate that the iPod was connected, so I plugged the USB cable into another slot -- nothing. (I know it isn't the USB because I plugged in a thumb drive and it works fine). I've also tried to update/restore the iPod... but alas, I can't because it's not recognized.
What happened to the iPod is even stranger. After the hard drive was wiped, I was able to turn it on and off and view photos. Now, it only displays the white Apple logo with the black background. The backlight keeps switching on and off randomly, the iPod won't turn off, and the hard drive is making the same noise it does when you change a song, only every few seconds (I assume it's doing this because it keeps turning the backlight on and off constantly).
I've only been able to use the iPod one week out of the two weeks I've had it -- and I'm really disappointed about it. Will I have to send it back to Apple? (hopefully under the 30 or 90 day warranty, whichever I qualify for)
Help is appreciated.
Luke
5G Video 30GB Windows XP Pro

In order to restore it, it has to show up on the desktop, I think. It doesn't. I downloaded the software, and it's waiting for me to plug in the iPod (which is plugged in).
I actually have been reseting it every minute or so since I read your post. Before I restore it, the battery icon doesn't show any lightning bolt or motion. Then if I restore it, it appears to be charging for a short time. I was wondering if I was going to have to charge it in lots of short increments (I don't have the optional charger).
I dug out the manual from under the desk. And it says that if it is extremely low on power, I may need to leave it charging for 30 minutes before it is recognized. I think from a sentence in there: "Leave iPod mini connected until at least the battery icon animates." So, maybe it is actually charging when it appears to be unconnected and has no lightening bolt.
I've turned it off and left it plugged in and am waiting for a charging battery icon to appear. If that doesn't work, I will try leaving it on and plugged in (so far it just turns off when I do that). Again, any suggestions are welcome.

After restoring, iPod won't work

Similar Messages

Maybe you are looking for