After running an updater on my mini

I still have an iPod mini that is going strong and I love it. I recently ran the updater and restored my iPod, wiping out all my music and getting back to the factory settings. Now that I am reloading songs on, ones that I before unchecked to NOT go on the iPod, are going on. How do I stop this? Or, better yet, what do I need to do to delete these from my iPod, since the unchecked box should have originally been the answer?
Hope that made sense. Thanks for all help in advance!

Thanks for your reply, but things are not going as smoothly yet. I no longer see that option under "Preferences." Could you be more specific?
And secondly, it turns out that the playlists I set up on iTunes did not transfer to the iPod. Instead, I have a playlist (actually under "Playlists" on the iPod) where all the songs are listed (in addition to being divided on the main menu by artist, album, etc.
I have no idea what's going on, and I'm perplexed because I do not consider myself a novice with iPod...

Similar Messages

  • Macbook will not boot up after running Software Update (Couldn't fix it)

    Hi there,
    I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
    1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
    2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
    CSRHIDTTransitionDriver::probe: -s
    CSRHIDTTransitionDriver::probe: booting in single user .. do not match
    Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
    Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
    3) When trying to boot in safe mode. I got a grey screen with the following message:
    'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
    4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
    5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
    I don't know what to do any more.
    A) Can I resuscitate my old system? If yes how?
    B) If not, can I at least save the data I have in my old HD?
    C) Is it possible to format and reinstall the OS or is this this computer doomed?
    Apologies for writing so many questions but I'm really freaking out!
    Thank you.
    B.

    Hi BDAqua,
    I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
    1) "Cloning method: Backup everything
    Delete items on target that aren't on the source: No
    18:23:39 Enabling ownership on the target volume...
    18:23:50 The target volume has ownership enabled.
    18:23:50 The target volume has Access Control Lists enabled.
    18:23:50 Authenticating...
    18:23:50 Initiating synchronization engine...
    18:23:51 Cloning...
    18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
    19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
    19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
    19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
    19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
    19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
    19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
    19:50:14 Sync Engine warnings: (
    "rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
    "rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
    "rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
    2) "Mac OS X Version 10.4.11 (Build 8S2167)
    2009-03-01 10:30:14 +0100
    2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
    Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
    Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
    2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
    2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Starting the process...
    2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
    2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
    Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
    Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
    Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
    Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Main starting
    2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
    2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
    Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
    Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
    Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
    Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

  • After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

    I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
    I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
    Migration Assistant Update for Mac
    Mac OSX 10.6.8 Supplemental Update
    Safari
    iTunes
    Remote Desktop Client Update
    Now I get a message:
    iTunes cannot be opened because of a problem
    Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
    Process:         iTunes [5092]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10315501~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [111]
    Date/Time:       2011-07-26 12:08:18.568 -0500
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          504736 sec
    Crashes Since Last Report:           20
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
    USB Device: Hub, 0x0424  (SMSC), 0x2507, 0x26400000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2502, 0x26470000 / 3
    USB Device: Deskjet D4300 series, 0x03f0  (Hewlett Packard), 0x1f04, 0x26471000 / 5
    USB Device: GD-0608-U, 0x056a  (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x04300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0307, 0x04310000 / 6
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x04330000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8216, 0x06110000 / 5
    FireWire Device: unknown_device, Unknown
    FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

    Same thing happened to me and I get the same error message. These are the programs that don't work
    mail
    keynote
    pages
    all Office 2011 programs
    safari

  • Macbook will not boot up after running Software Update

    My MacBook will not boot up after running Software Update (Security update + Java?) earlier today. I have only the gray start up screen + Apple logo + gear wheel constantly rotating. I have tried restarts several times and tried to start up from my original system DVD - this makes no difference.
    I called Apple support, tried resetting the power and PRAM - still no difference. He had no knowledge of other problems reported; although I note recent post may have same issue.
    I cannot get an appointment at my Apple Store before Monday.
    Any suggestions?

    Still no success. When I hold down the option key when powering up I get the hard disk icon plus arrowhead (only). When clicking the arrowhead it goes to the gray screen + apple logo+ rotating gearwheel.
    This happens both with DVD in slot and without DVD. the DVD image is not coming up on screen. When I start up without DVD the hard disk icon appears promptly. When I start with DVD in the DVD is spinning for a short period before the hard disk icon appears. On clicking the arrowhead to hard disk icon the DVD spins again for a while then stops. Apart from the DVD spinning, both situations result in gray screen + apple logo+ rotating gearwheel.

  • Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

    The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white,  goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

    After ios 7 update on ipad mini, auto rotation stop working. Anyone facing this issue too?

    for ipad,
    if you go to settings-General
    You can select between using the side switch to lock rotation or mute.  If you select one mute, then the lock rotation icon will show up in the control center.  If you select lock rotation, then the mute will show up.  THe side switch is then used for the other option.

  • PSI - Budget Field is not getting after running Process Update Summary Bal

    Hi,
    I have a project with Budget being created through Financial Plan types. After Baselining the budget and performing Actual Transactions, i run Process 'PRC: Update Project Summary Amounts for a Single Project' and 'PRC: Update Project Summary Amounts'. System updates Project Status Inquiry - PSI with Actual Transactions but Budget field is getting updated and it keeps on showing as Zero Budget.
    Whereas when i create project with Budget Entry Method and not through Financial Plan Types, PSI is correctly updated after running these processes. Is PSI budget field intended for Budget Entry from Application Based Forms Only or there is something else i need to do get the PSI Bidger field updated.
    Thoughts on this would be highly appreciable.
    Zeeshan

    Hi Dina
    Thanks for your reply, please confirm what i have to do in order to populate the data to PSI from Financial Plan.
    Zeeshan

  • Macbook air is stuck in a reboot loop after running Software Update.  It looks like a firmware update is failing.

    I have a first generation Macbook Air running Lion, and just ran software update to get the latest version of iTunes.  It appears I may have gotten a firmware update mixed in the bunch, and now it keeps trying to run the update at boot, failing, and shutting down.
    I can start the restore partition, and the system appears to function, but I cannot figure out how to abort this failing update so I can use my system, and determine which update is breaking it and why. I've tried resetting the firmware, but that didn't change anything.
    There's nothing, not even a the CD drive plugged into the Air, so it's not a peripheral problem.
    I could restore from backups, but that seems like a very brute force way to get rid of a firmware update loader.
    Does anyone know how to disable these little beasts?

    Restart the Air while holding down the shift key, this is safe mode. Once in to the login screen, login then hold the shift key again. It will disable login items, which can be the cause of startup problems. Remove all your login items from your user accout and try a restart (Note the login items if you need to re-add essential ones later). If it all works well, then keep an eye on third party startup items, they will cause you grief!

  • Error -36 after running software updates

    I'm working at a new place that hadn't run software update in months. I just finished updating everything and now I can't connect to the server anymore. Everyone else in the office is connected, so it's just me. Also, I was connected a few hours ago before I started installing all the updates.
    I had security and firmware updates included. Any ideas?
    Also, the connection is being made with smb protocol, if that makes a difference. Thanks!
    Message was edited by: Libbalou

    most of the other computers in the office are PCs. There is only one other Mac. (that user is on vacation and I'm not sure if it will connect or not.)
    I'm not sure about the server, but will try to find out and post later. (I came in this morning and nothing has changed).
    Thanks again.

  • Z77A-GD65, "Missing Operating System" after running Live Update

    So here's the brand new computer I assembled:
    $309.99 HIS IceQ Boost Clock H795QC3G2M Radeon HD 7950 3GB 384-bit GDDR5 PCI Express 3.0 x16
    $219.99 Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz Turbo) LGA 1155 77W Quad-Core Processor Intel HD Graphics 4000
    $199.99 Acer G276HLDbd Black 27" 6ms (GTG) Widescreen LED Monitor
    $179.99 Western Digital WD Black WD2002FAEX 2TB 7200 RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
    $159.99 AZZA Hurricane 2000 CSAZ-2000 Black SECC Japanese Steel ATX Full Tower Case
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $154.99 Intel 335 Series 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
    $144.99 MSI Z77A-GD65 LGA 1155 Intel Z77 Motherboard with UEFI BIOS
    $119.99 OCZ ZT Series 750W Fully-Modular 80PLUS Bronze Power Supply
    $99.99 Kingston HyperX Beast 16GB (4 x 4GB) 240-Pin DDR3 2400 (PC3 19200) RAM
    $99.99 Logitech G930 USB Connector Circumaural Wireless Gaming Headset
    $99.99 Microsoft Windows 7 Home Premium SP1 64-bit - OEM
    $74.99 ASUS Black Blu-ray Burner SATA BW-12B1ST/BLK/G/AS
    $59.40 CNPS9900MAXR Red CPU Cooler
    $49.95 3YR DATA RECOVERY SERVICE I INT. HD For (WD Black 2TB)
    $34.99 2 yr Replacement W/ ADH plan For (Acer 27" LCD)
    $10.99 LITE-ON SK-2030/B Black PS/2 Wired Slim Keyboard
    $9.99 LITE-ON SK-2035/B Black USB Wired Slim Keyboard
    I wanted to have the SSDs in RAID0 with Win7 and the games on it, then a volume on the 2TB that the RAID backs up to, with the remaining 1.5TB just free storage space in another volume.  I couldn't get raid past Win7's Where Do You Want To Install screen during installation, so I ended up installing the OS on just one SSD.  I figured I'd backup the functioning OS to the 2TB then rebuild the RAID array and copy the OS back onto it.
    The system had been up an running for a full day, being updated left and right nonstop, several big games put in, etc etc, everything was running fine until I decided to run MSI Live Update and started pumping in updates.  Constant errors as I went along, but generally it'd just skip to the next installation attempt.  When it got down to updating the BIOS and did it's DOS injection thing, it for forcefully shut down the PC, restarted, did Post, flashed the BIOS wallpaper, restarted again, Posted, no BIOS wallpaper, just endless "Missing Operating System".  Walked away, went to bed, back up and at it for a few minutes (Will be back tonight for however long it takes to get it fixed).  I switched the BIOS switch over, no dice.  Feels like it's a BIOS "OS" that's gone, and that a BIOS reset/flash is in order or something, but I've never done these things.
    Thanks in advance for any rendered assistance that leads to resolution.

    The SSDs are definitely hooked up where they're supposed to go; the motherboard had a little sticker n' everything for where the two SSD dedicated SATA 6.0gbps ports were :P  AND my case has 2 specific slots for SSDs which don't use the hotswap electronics PCB passthrough like the other 4 bays, which is where the 2T is installed.  I was going to take the 2TB out and hook it up normally and see if that changed the speeds, but I'm leaning towards wishful thinking.  Did I mention I went and made several volumes with different file cluster sizes to test and see if that was the issue?  Alas, all were borked.  It still confuses me though because every once n' awhile it'd do massive burst speeds the way it's supposed to.
    As far as I can recall I'm using up to date BIOS, the last one or two.  One BIOS switch is set for the last BIOS, the other switch is a step back devoid of the Windows 8 stuff.  I believe I have all the drivers up to date as well.  Intel 335's are literally brand new, mine hadn't been more than 3 weeks old off the production line when I received them; IE, they should pretty much have the latest firmware on them which spares me the risk of destroying something precious 
    I MIGHT have a SATA external enclosure around here somewhere, if so, the 2TB could go in that for additional testing until I figure out where it's sustaining speeds of 2-10MB vs 100-150MB/second.
    Meanwhile, the good news is that the system has been fully operational and hella stable.  I hadn't slept in almost 3 days, playing and installing stuff nonstop.  The system continues to run cooler (32c@stock CPU speed) as the thermal paste sets in, the knocking sound of the fan in the PSU has gone away upon me reawakening a bit ago, and amazingly, this massive system (with EIGHT fans) draws only 60-65 watts while desktopping.  That's just astounding 

  • Disk Full on server after running "Schedule Updates" on OS Image

    Looking for advice after filling up our sccm server hard-drive as a result of running a "Schedule Updates" against an OS image
    Running SCCM 2012 R2. Site server disk partitioned as 4 drives, with E: drive holding program files, sccm binaries, etc, and G: drive holding all content
    At close of play yesterday, I ran the "schedule update" option against one of our OS Images (Win7 Pro x64). When I arrived this moring, I noticed that this had reported a status of "failed" ("failed to find or access the update binaries
    to be applied on the image"). I also noticed that our E: drive on the sccm server is now full. There are 2 folder created yesterday which look like they have been created as a result of the Schedule Update:
    E:\WSUS\WsusContent - 88Gb
    E:\ConfigMgr_OfflineImageServicing - 4.6Gb
    Is it ok just to manually delete these folders? Or is there an option within the SCCM console where I can clean up these folders?
    Lastly, is there a way to configure the "Schedule Updates" option to point to a specific disk/folder to store and service the offline image, so that this is done on the much bigger G: drive?
    Thanks
    Stan

    Yep. That rule will approve everything and cause everything to be downloaded.
    Safe? It's not going to break anything in ConfigMgr if that's your definition of safe here. As mentioned, it's not needed or required by ConfigMgr to deploy updates and having it enabled is useless (as far as ConfigMgr is concerned). Once you disable the
    rule, the checkboxes on the advanced tab are irrelevant.
    If you leave this rule enabled, yes, your wsuscontent folder will continue to grow.
    To reduce its size, you should go and set all approved updates to "Not Approved" and then run the WSUS cleanup Wizard. That will delete nearly all of the update binaries from the WSUSContent folder. As mentioned, EULAs will still exist there but
    these are very small size wise so won't be a big deal.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • No audio after latest security update on mac mini

    it seems that my audio out from my mac mini into my tv stopped working after i updated the last security install. is anyone else having this problem?

    I have the same problem.  Yes, a restart brings back the HDMI audio (the internal speaker was always working too), but it only lasts until it goes to sleep for a long period...usually overnight...then same no audio issue.  I took it in to an Apple store and after 2 days they told me "no hardware issues".  No kidding, hardware problems are rarely solved by a restart!!!  Some software update is causing this...and Apple needs to fix it!!

  • Bluetooth stops working after OS X update on mac mini

    Just installed the OS X 10.8.5 on my Mac Mini late 2012 model and after the restart the bluetooth was not available. I had to find a USB Keyboard and mouse to be able to log on to my computer and use it. Does anyone know how to repair this. This must be a fault from Apples update and Apple should find a solution or bring out a fix on this update. Any ideas

    Try resetting the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)
    I had no problem on my 2012 Mni after updating.

  • Issue after running OSX Update

    I have a MacBook Pro running 10.8.5
    I ran the software update which required a reboot and ran until showing "About a Minute" then Hung
    I had to force a power off to clear it.  On Powering up it booted normally but on the last account opened Finder does not work (on clicking the ico the besktop folder flash as if finder is restarting but no windows open).  Additionally the computer will not connect to my network.  It can see the network.
    In the other account (also with admin rights) finder works fine but the same issue exists with the wifi.
    I have tried deleting the network in System preferences, then re-adding it - all I get is an immediate Network timeout error
    I have rebooted the network which my other devices all log on to normally.
    How can I get my MacBook back into action?  Any ideas gratefully received.

    In the account that isn't working.
    In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/
    com.apple.finder.plist. Move the .plist to your desktop.
    Re-launch Finder by logging out/in and test. If it works okay, delete the plist from the desktop.
    If the same, return the .plist to where you got it  from, overwriting the newer ones.
    If you want to make your user library permanently visible, run the below command in Applications/Terminal.
    chflags nohidden ~/Library/
    You will need to do that after any updates.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • Blank screen & no booting after running BIOS update on Satellite A200-1AE

    Here is my problem with my A200-1AE (PSAECE) Notebook:
    I downloaded the latest BIOS update from the Toshiba download drivers library to install Win XP since finally the drivers are realized. (Note the update clearly stated to run ONLY if you want to install XP on you NB).
    So I unzipped the file and after hitting the .exe file it started updating the BIOS on its own without me giving the liberty to do so. Half way the N/B froze for about 20 minutes and as I didnt know what else to do so I reset it.
    Result? The NB does NOT boot. I press the power button, the Hard Drive icon flashes 2-3 times as well as the DVD drive, I get a blank screen and the power cord & power button icons constantly on. I removed the battery and the power cord for 48 hours hoping it will reset the BIOS on its own to no avail.
    The BIOS battery is under the touchpad which means I have to disassemble the whole laptop and I am not ready to do so. I dont know if on the motherboard there are BIOS reset jumpers and I need someones help as to what I should do. I am starting to think that things where MUCH easier back to when I just had a desktop PC.
    THERE must be something I can do other that taking it to the service center and pay half the value of the laptop in repairs.... PLS HELP Im desperate....

    Hi there,
    first of all: a notebook is not a desktop and such mobile computer does not have jumpers like a deskop computer. They surely have something to delete the BIOS but I am not so sure IF resetting the BIOS could help you.
    I guess you will have to send your machine to a service center for repair because in such cases you will have no other option. Do you have still warranty on this machine?
    Greets

Maybe you are looking for