After running /etc/rc.d/alsa stop there is still sound why? [SOLVED]
Because of the way I want my install to behave instead of appending alsa to the end of the daemons line in /etc/rc.conf I opt to start alsa manually when/if needed with
/etc/rc.d/alsa start
It works well but after I go
/etc/rc.d/alsa stop
and some time later
aplay /usr/share/sounds/alsa/Front_Center.wav
I still hear sound? Why?
By the way if it helps any after running
/etc/rc.d/alsa stop
the output is
::Saving ALSA Levels
See I looked at the script and even though my knowledge of bash is sadly limited I saw in the stop) case somehow if something else goes right it should say "Stopping Alsa". Thus I think that is supposed to happen why isn't it? What's going on? How do I fix this?
Last edited by hiushoz (2011-01-05 16:37:51)
Tomk what you say is somewhat true. However the wiki doesn't quite explain what I want to know or if it does it explains it in a way I don't understand. I'm trying my best to learn this stuff but being relatively inexperienced there are limits to what I can do thus I ask a question here in the hopes of learning and being given the information in a form that I understand.
schmmd while I could certainly mute the volume that's not what I want. This may sound strange but what I want is a system that boots up to the command line in a very minimal fashion. I don't automatically want an internet connection. I don't automatically want a GUI. I don't automatically want sound. If I want any of these things I want to be able to start and stop them manually. Like if I want to connect to the internet I go
/etc/rc.d/network start
and when I want to disconnect I go
/etc/rc.d/network stop
It all works as expected. However sound doesn't. It starts when I want it but it doesn't stop when I want it. Perhaps I don't know how to use the script. When I go start it works as expected. When I go stop it still makes sounds.
I don't understand what's happening. Can you guys please help me?
Similar Messages
-
On any web sight that has short moves of anytype there is NO SOUND why ???
when I go to any web sight and try to hear a move of any type, there is NO sound. Why???
QuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick -
My new ipod nano plays videos but there is no sound, why?
My new iPod nano that plays videos has no sound going along with them. It's not a problem with the iPod, (I don't think) because the sound won't play on iTunes either, yet my music in playing just fine both on my ipod nano and in itunes. I dragged and dropped the video into itunes then I converted the video then used the convert selection for ipod. Why is there no sound? Is there something I am doing wrong? My 30gb ipod did worked just fine when I did it that way but my new ipod nano won't. Is there something else I have to do before I can watch and listen to videos?
Any help would be greatly appreciated.
Thanks!
BeccaQuickTime expects video files with separate video and audio tracks, but many MPEG formats used a muxed (multiplexed) single track that contains both. Therefore, iTunes & the iPod (both of which use QuickTime) only show the video and no sound.
iPod plays video but not audio of some exported files
http://docs.info.apple.com/article.html?artnum=302588
One way to work around this is to use MPEG Streamclip to convert the files to fix this issue...
http://www.squared5.com/
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick -
Fullscreen option on videos does not turn to fullscreen, just black, and there is still sound
When I'm on a video site like Hulu or just streaming videos on a site, when I click the fullscreen button the screen just turns black. I can still hear the sound, and when I click Esc it turns back to normal.
Try to disable the hardware acceleration in the Flash Player.
See [[Cannot view full screen Flash videos]]
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html -
Program Compatibility Assistant popping up after running and closing .EXE flash created by adobe cap
Hi,
I am using windows 7. I have a .Exe flash file created using Adobe Captivate. I have closed the file after running it successfully. Then this message popped up.
Why this message is coming even after successful playing of flash? Is there any way to avoid this?Hello there,
Are you using Captivate version 5 or 5.5? Do you know the version of Flash Player Installed? I have not seen this message appear any time, can you please confirm in one more machine? What flavor of Win 7 do you have?
Thanks,
Vish -
Erased free space in Disk Utility, and after it finished it kept a DMG there.
I erased free space in Disk Utility, and after it finished it kept a DMG there called "DeveloperDiskImage.dmg", why is it left behind? can it be deleted? how? if erasing free space is supposed to help get memory and remove all the files truly, it shouldnt be creating anything, it created a DMG at the start, but it went away, after a hour and a half it made the DeveloperDiskImage, i went to eat dinner and when i came back it was done but that was left.
Delete it. Erasing the free space isn't supposed to free up any space; it's there in case someone deleted a file insecurely when they meant to securely delete it.
(65417) -
I am in Windows Movie Maker and want to narrate - there's no sound.
I hit the "record narration" It "appears" to be working. But when I hit playback, there is no sound.
Problem solved. It wasn't working in gmail so I used the default mail app and it worked..after hours of searching for a phantom solution.
-
I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
Help.BB1B2,
The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
Sorry,
Clinton -
mozilla firefox start page keeps logging itself on after I close all internet windows I come back and there it is. Why??? Make it stop.
I've got the exact same issue! I'm pretty sure it just started today too. It's so bizarre because we've all been using Firefox 26.0 for at least a month, right? How could the ''about:home'' page all of a sudden cause this issue?
I've been able to replicate this issue on a virtual machine running Windows XP SP3, so clearly it has nothing to do with Windows 7. -
Vista x64, Dell Laptop Lately I have been getting audio ads from Lysol etc which I can stop by deleting the process plug-in container Iknow how to delete this process but why does the audio ad run despite the application of two well known antivirus progs?
Oh, PLEASE IGNORE the line:
deleted everything under HKLM\SYSTEM\CurrentControlSet\Enum\Root\SYSTEM (folders 0000 to 0004)
That was left there inadvertedly. Can't seem to find the edit button here... -
Alv show in report but when see in spool (after run background job) there i
my program have some error when i run result alv show in report but when see in spool (after run background job) there is no data, (other program can see result in spool)
Please help
here is some example of my program
********************************declare internal table*****************************
internal table output for BDC
data : begin of t_output occurs 0,
bukrs type anla-bukrs,
anln1 type anla-anln1,
anln2 type anla-anln2,
zugdt type anla-zugdt,
result(70) type c,
end of t_output.
*****get data from loop********************************
loop at t_anla.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_anla-anln1
IMPORTING
OUTPUT = t_anla-anln1.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
INPUT = t_anla-anln2
IMPORTING
OUTPUT = t_anla-anln2.
check record is correct or not
select single bukrs anln1 anln2 zugdt
into w_output
from anla
where bukrs = t_anla-bukrs and
anln1 = t_anla-anln1 and
anln2 = t_anla-anln2
zugdt = '00000000'
if record is correct
if sy-subrc = 0 and w_output-zugdt = '00000000'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Yes : this asset can delete'.
append w_output to t_output.
if record is not correct
elseif sy-subrc = 0 and w_output-zugdt <> '00000000'.
there is error record this asset have value already
v_have_error = 'X'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Error : this asset have value already'.
append w_output to t_output.
else.
there is error record this asset donot exist in table anla
v_have_error = 'X'.
w_output-bukrs = t_anla-bukrs.
w_output-anln1 = t_anla-anln1.
w_output-anln2 = t_anla-anln2.
w_output-result = 'Error : this asset doest not exist'.
append w_output to t_output.
endif.
*end of check record is correct or not
clear w_output.
endloop.
******************************show data in ALV***************************************************
show data from file in ALV
perform display_report_ALV.
*& Form display_report_ALV
form display_report_ALV.
DATA: LT_FIELD_CAT TYPE SLIS_T_FIELDCAT_ALV,
LT_EVENTS TYPE SLIS_T_EVENT,
LV_REPID LIKE SY-REPID.
PERFORM ALV_DEFINE_FIELD_CAT USING LT_FIELD_CAT.
PERFORM ALV_HEADER_BUILD USING T_LIST_TOP_OF_PAGE[].
PERFORM ALV_EVENTTAB_BUILD USING LT_EVENTS[].
LV_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = LV_REPID
IT_FIELDCAT = LT_FIELD_CAT
I_SAVE = 'A'
IT_EVENTS = LT_EVENTS[]
TABLES
T_OUTTAB = t_output
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
WRITE: / 'Return Code : ', SY-SUBRC,
'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
endform.
*& Form alv_define_field_cat
text
-->P_LT_FIELD_CAT text
FORM ALV_DEFINE_FIELD_CAT USING TB_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: WA_FIELDCAT LIKE LINE OF TB_FCAT,
LV_COL_POS TYPE I.
DEFINE FIELD_CAT.
CLEAR WA_FIELDCAT.
ADD 1 TO LV_COL_POS.
WA_FIELDCAT-FIELDNAME = &1.
WA_FIELDCAT-REF_TABNAME = &2.
WA_FIELDCAT-COL_POS = LV_COL_POS.
WA_FIELDCAT-KEY = &3.
WA_FIELDCAT-NO_OUT = &4.
WA_FIELDCAT-REF_FIELDNAME = &5.
WA_FIELDCAT-DDICTXT = 'M'.
IF NOT &6 IS INITIAL.
WA_FIELDCAT-SELTEXT_L = &6.
WA_FIELDCAT-SELTEXT_M = &6.
WA_FIELDCAT-SELTEXT_S = &6.
ENDIF.
WA_FIELDCAT-DO_SUM = &7.
WA_FIELDCAT-OUTPUTLEN = &8.
APPEND WA_FIELDCAT TO TB_FCAT.
END-OF-DEFINITION.
FIELD_CAT 'BUKRS' 'ANLA' 'X' '' 'BUKRS' 'Company Code' '' ''.
FIELD_CAT 'ANLN1' 'ANLA' 'X' '' 'ANLN1' 'Asset Number' '' ''.
FIELD_CAT 'ANLN2' 'ANLA' 'X' '' 'ANLN2' 'Asset Sub Number' '' ''.
FIELD_CAT 'ATEXT' 'T5EAE' 'X' '' 'ATEXT' 'Result' '' ''.
FIELD_CAT 'RESULT' '' 'X' '' 'RESULT' 'RESULT' '' ''.
ENDFORM. " alv_define_field_catHi,
Check this code..
FORM display_report_alv.
DATA: lt_field_cat TYPE slis_t_fieldcat_alv,
lt_events TYPE slis_t_event,
lv_repid LIKE sy-repid.
PERFORM alv_define_field_cat USING lt_field_cat.
PERFORM alv_header_build USING t_list_top_of_page[].
PERFORM alv_eventtab_build USING lt_events[].
lv_repid = sy-repid.
IF sy-batch EQ 'X'. ----> " System Field for Backgroud..if Background use list display
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = lt_field_cat
i_save = 'A'
it_events = lt_events[]
TABLES
t_outtab = t_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ELSE.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = lv_repid
it_fieldcat = lt_field_cat
i_save = 'A'
it_events = lt_events[]
TABLES
t_outtab = t_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
IF sy-subrc NE 0.
WRITE: / 'Return Code : ', sy-subrc,
'from FUNCTION REUSE_ALV_GRID_DISPLAY'.
ENDIF.
ENDFORM. "display_report_ALV -
I lost the ability to use wifi after the 8.02 update. Is there a way to fix this? I've already tried resetting network. Turned the phone off and on. Nothing is working and now I have to run on just data.
csdwarf,
So sorry to hear about the trouble with Wi-Fi! Let's get that working the way it should. Could you provide us some more details regarding where this breakdown occurs? Are you having trouble with turning Wi-Fi on or connecting to your Wi-Fi? Are other devices connecting to your Wi-Fi without issue?
BrianP_VZW
Follow Us on Twitter @VZWSupport -
Just installed Mac OS X 10.8.5 on a Mac Pro 2010 platform.
The App Store shows there is an upgrade, so I click the download button.
After about 2 hrs the process stops and an Error (102) appears on the screen.
Any idea what goes wrong?
THXahstephen wrote:
Thank you for the response.
The upgrade I'm interested is for OS X v.10.8.5...
...The App Store page shows 2 different upgrades:
Mountain Lion (10.8.5) Software Upgrade, and
Yosemite FREE upgrade
If the App Store is showing 10.8.5 as an update, what do you currently have installed? The final update to Mountain Lion was 10.8.5, and since the basic OS installation of Mountain Lion is no longer offered in the App Store, that would suggest you're currently at an earlier version of Mountain Lion - 10.8.x where x=less than 5. If that's the case, I'd suggest getting the 10.8.5 update. There is also a Supplemental Update for 10.8.5 and that may be what the App Store is offering. -
Hi,
I use ridc to check in file into Oracle Center Content server. There is no problem at the beginning. But after running for several days, there is following error.
I must restart my program to solve this issue.
Can anyone help me solve this problem?
Thanks,
Tony
2013-07-11 12:24:31,189 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
... 19 more
2013-07-11 12:24:33,005 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
... 19 more
2013-07-11 12:24:37,870 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
... 19 more
2013-07-11 12:24:39,722 ERROR [BatchEventHandler] com.edocs.common.api.integration.contmgmt.ContentException: oracle.stellent.ridc.protocol.ProtocolEx
ception: java.io.IOException: Input terminated before being able to read line
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:95)
at com.edocs.common.reporting.batch.BatchEventHandler.processBatchRequest(BatchEventHandler.java:284)
at com.edocs.common.reporting.batch.BatchEventHandler.service(BatchEventHandler.java:138)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.executeInternal(BatchReportProcessorTask.java:156)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask.doProcessTask(BatchReportProcessorTask.java:68)
at com.edocs.pwc.tasks.CommonTask.processTask(CommonTask.java:166)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.__WL_invoke(Unknown Source)
at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl.processTask(Unknown Source)
at com.edocs.common.reporting.tasks.batchprocessor.BatchReportProcessorTask_9qwgr6_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: oracle.stellent.ridc.protocol.ProtocolException: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:149)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:108)
at com.edocs.common.integration.contmgmt.UCMContentManager.saveContent(UCMContentManager.java:81)
... 17 more
Caused by: java.io.IOException: Input terminated before being able to read line
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readLine(HdaBinderSerializer.java:371)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.readToEnd(HdaBinderSerializer.java:335)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:165)
at oracle.stellent.ridc.model.serialize.HdaBinderSerializer.parseBinder(HdaBinderSerializer.java:71)
at oracle.stellent.ridc.protocol.ServiceResponse.getResponseAsBinder(ServiceResponse.java:126)
... 19 moreThe following is my testing code.
package ebilling;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.io.OutputStream;
import java.security.SecureRandom;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.List;
import java.util.Properties;
import java.util.concurrent.LinkedBlockingQueue;
import java.util.concurrent.ThreadPoolExecutor;
import java.util.concurrent.TimeUnit;
import oracle.stellent.ridc.IdcClient;
import oracle.stellent.ridc.IdcClientManager;
import oracle.stellent.ridc.IdcContext;
import oracle.stellent.ridc.model.DataBinder;
import oracle.stellent.ridc.model.DataObject;
import oracle.stellent.ridc.model.DataResultSet;
import oracle.stellent.ridc.model.TransferFile;
import oracle.stellent.ridc.protocol.ServiceResponse;
import org.apache.commons.lang.StringUtils;
public class UCMContentManager {
* Check in a file into a Oracle WebCenter Content Server and return content id of uploaded content item in Oracle WebCenter Content Server.
* @param properties The Oracle WebCenter Content Server connection properties.
* @param contentFile This file will be checked in a Oracle WebCenter Content Server.
* @param path The location path of checked in file in Oracle WebCenter Content Server. This path includes the file name.<br>
* For example, "/folder1/folder2/file1.txt". The "file1.txt" is the file name part. <br>
* The file name will be used as dDocName in Oracle WebCenter Server. It must be unique.<br>
* @throws ContentException The exception when uploading file into Oracle WebCenter Content Server.
* @return The content id of uploaded content item in Oracle WebCenter Content Server.
public String saveContent(Properties properties, File contentFile, String path) throws ContentException{
if(path.endsWith(SLASH)) {
throw new ContentException("Require file name in Content Management Server");
if(!path.startsWith(SLASH)) {
throw new ContentException("The file store path in Content Management Server should be absolute.");
if (path.indexOf("//") != -1) {
path = path.replace("//", SLASH);
String[] paths = path.split(SLASH);
String[] parents = new String[paths.length - 1];
String itemName = paths[paths.length-1];
System.arraycopy(paths, 0, parents, 0, paths.length-1);
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
//create the parent folders if they don't exist
String folderGUID = makeFolders(properties, parents);
//check in the file
DataBinder requestData = client.createBinder();
requestData.putLocal("IdcService", "CHECKIN_UNIVERSAL");
requestData.putLocal("IsJava", "1");
requestData.putLocal("dDocName", itemName);
requestData.putLocal("dDocTitle", itemName);
requestData.putLocal("dDocType", "Binary");
requestData.putLocal("dSecurityGroup", "Public");
requestData.addFile("primaryFile", new TransferFile(contentFile));
response = client.sendRequest(connectionContext, requestData);
DataBinder responseData = response.getResponseAsBinder();
//String did = responseData.getLocal("dID");
String dDocname = responseData.getLocal("dDocName");
closeResponse(response);
//link the file in a folder
requestData = client.createBinder();
requestData.putLocal("IdcService", "FLD_CREATE_FILE");
requestData.putLocal("fParentGUID", folderGUID);
String fileType = "owner";
requestData.putLocal("fFileType", fileType);
requestData.putLocal("dDocName", dDocname);
response = client.sendRequest(connectionContext, requestData);
return dDocname;
} catch (Throwable e) {
throw new ContentException(e);
} finally{
closeResponse(response);
public void deleteContent(Properties properties, String contentId) throws ContentException{
List<String> didList = getDIds(properties, contentId);
contentId = contentId.toUpperCase();
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder requestData = null;
for(int i=0; i<didList.size(); i++) {
String did = didList.get(i);
requestData = client.createBinder();
requestData.putLocal("IdcService", "DELETE_DOC");
requestData.putLocal("dDocName", contentId);
requestData.putLocal("dID", did);
response = client.sendRequest(connectionContext, requestData);
closeResponse(response);
//delete parent folder
// try {
// requestData = client.createBinder();
// requestData.putLocal("IdcService", "FLD_DELETE");
// requestData.putLocal("item1", "path:" + parentPath);
// requestData.putLocal("constructDialog", "1");
// response = client.sendRequest(connectionContext, requestData);
// } catch (Exception e) {
// // TODO: handle exception
} catch (Exception e) {
throw new ContentException(e);
} finally {
closeResponse(response);
public int getFileCountInFolder(Properties properties, String path) throws ContentException{
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder binder = client.createBinder();
binder.putLocal("IdcService", "FLD_BROWSE");
binder.putLocal("path", path);
response = client.sendRequest(connectionContext, binder);
DataBinder result = response.getResponseAsBinder();
String num = result.getLocal("numFiles");
return Integer.parseInt(num);
catch (Exception e) {
throw new ContentException(e);
} finally {
closeResponse(response);
private String getFolderGUID(Properties properties, String path) throws ContentException {
ServiceResponse response = null;
String tmpFolderGUID = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder requestData = client.createBinder();
requestData.putLocal("IdcService", "FLD_INFO");
requestData.putLocal("path", path);
response = client.sendRequest(connectionContext,
requestData);
DataResultSet result = response.getResponseAsBinder().getResultSet("FolderInfo");
tmpFolderGUID = result.getRows().get(0).get("fFolderGUID")
.toString();
if(StringUtils.isBlank(tmpFolderGUID))
tmpFolderGUID = null;
} catch (Exception e) {
} finally {
closeResponse(response);
return tmpFolderGUID;
public boolean deleteFolder(Properties properties, String path) throws ContentException {
if(getFolderGUID(properties, path)==null)
return false;
int fileCount = getFileCountInFolder(properties, path);
ServiceResponse response = null;
if(fileCount==0) {
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder binder = client.createBinder();
binder.putLocal("IdcService", "FLD_DELETE");
binder.putLocal("item1", "path:" + path);
binder.putLocal("constructDialog", "1");
response = client.sendRequest(connectionContext, binder);
return true;
catch (Exception e) {
throw new ContentException(e);
} finally {
closeResponse(response);
} else {
return false;
private String buildPath(String[] arr, int i) {
StringBuilder buf = new StringBuilder();
for(int j=0; j<=i; j++) {
buf.append(arr[j]);
buf.append(SLASH);
return buf.toString();
private String makeFolders(Properties properties, String[] paths) throws ContentException{
String folderGUID = "";
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
String parentFolderGUID = null;
for(int i=0; i<paths.length; i++) {
String fullPath = buildPath(paths, i);
DataBinder requestData = null;
parentFolderGUID = folderGUID;
folderGUID = getFolderGUID(properties, fullPath);
boolean exists = folderGUID!=null;
DataResultSet result = null;
if(!exists) {
//create new folder
try {
requestData = client.createBinder();
requestData.putLocal("IdcService", "FLD_CREATE_FOLDER");
requestData.putLocal("fParentGUID", parentFolderGUID);
requestData.putLocal("fFolderName", paths[i]);
response = client.sendRequest(connectionContext, requestData);
} finally {
closeResponse(response);
//retrieve folderGUID of new folder
folderGUID = getFolderGUID(properties, fullPath);
} catch (Throwable e) {
throw new ContentException(e);
} finally{
closeResponse(response);
return folderGUID;
public List<String> getDIds(Properties properties, String contentId) throws ContentException{
contentId = contentId.toUpperCase();
List<String> didList = new ArrayList<String>();
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder requestData = null;
requestData = client.createBinder();
requestData.putLocal("IdcService", "GET_SEARCH_RESULTS");
requestData.putLocal("SortField", "dInDate");
requestData.putLocal("SortType", "DESC");
requestData.putLocal("QueryText", "dDocName <matches> `" + contentId +"`");
response = client.sendRequest(connectionContext, requestData);
DataBinder result = response.getResponseAsBinder();
DataResultSet resultSet = result.getResultSet("SearchResults");
for (DataObject dataObject : resultSet.getRows()) {
// System.out.println("ID : " + dataObject.get("dID")+" dDocName : "
// + dataObject.get("dDocName") + " Title : " + dataObject.get("dDocTitle")
// + " Author : " + dataObject.get("dDocAuthor") + " Security Group : "
// + dataObject.get("dSecurityGroup"));
String did = dataObject.get("dID");
didList.add(did);
//break;
} catch (Exception e) {
throw new ContentException(e);
} finally{
closeResponse(response);
return didList;
* Get the file content represented by contentId from a Oracle WebCenter Content Server.
* The return value is the input stream of retrieved file content.
* @param properties The Oracle WebCenter Content Server connection properties.
* @param contentId The Content ID for the content item in Oracle WebCenter Content Server.
* @throws ContentException The exception when retrieving content from Oracle WebCenter Content Server.
* @return The input stream of retrieved file content.
public InputStream retrieveContent(Properties properties, String contentId) throws ContentException{
try {
return new FileInputStream(retrieveContentFile(properties, contentId));
} catch (Throwable e) {
throw new ContentException(e);
public File retrieveContentFile(Properties properties, String contentId) throws ContentException {
contentId = contentId.toUpperCase();
ServiceResponse response = null;
try {
IdcClientManager manager = new IdcClientManager();
IdcClient client = manager.createClient(properties.getProperty(URL_PROPERTY));
client.getConfig().setProperty ("http.library", "apache4");
String user = properties.getProperty(USERNAME_PROPERTY);
String pwd = properties.getProperty(PASSWORD_PROPERTY);
IdcContext connectionContext = new IdcContext(user, pwd);
pwd = null;
DataBinder binder = client.createBinder();
binder.putLocal("IdcService", "GET_FILE");
//binder.putLocal("dID", dID);
binder.putLocal("dDocName", contentId);
binder.putLocal("RevisionSelectionMethod", "Latest");
response = client.sendRequest(connectionContext, binder);
InputStream in = null;
OutputStream out = null;
String edxhome = System.getProperty("edx.home");
File tmpParent = new File(edxhome);
tmpParent = new File(tmpParent, "Output");
tmpParent = new File(tmpParent, "tmp");
tmpParent.mkdirs();
File tmpFile = File.createTempFile("down_", "_ucm", tmpParent);
tmpFile.deleteOnExit();
try {
in = response.getResponseStream();
out = new FileOutputStream(tmpFile);
byte[] buf = new byte[1024];
int read = -1;
while((read = in.read(buf))!=-1) {
out.write(buf, 0, read);
} finally{
try {
if(in!=null)
in.close();
} catch (Exception e2) {
try {
if(out!=null)
out.close();
} catch (Exception e2) {
return tmpFile;
} catch (Throwable e) {
throw new ContentException(e);
} finally{
closeResponse(response);
private void closeResponse(ServiceResponse response) {
if(response!=null) {
try {
response.close();
} catch (Exception e) {
private static final String SLASH = "/";
private static final String URL_PROPERTY = "contentServerURL";
private static final String USERNAME_PROPERTY = "contentServerUser";
private static final String PASSWORD_PROPERTY = "contentServerPassword";
static volatile boolean flag = false;
static class UploadTask implements Runnable{
public void run() {
try {
while(!flag) {
UCMContentManager manager = new UCMContentManager();
Properties properties = new Properties();
properties.put(URL_PROPERTY, "https://slc402124:16201/cs/idcplg");
properties.put(USERNAME_PROPERTY, "weblogic");
properties.put(PASSWORD_PROPERTY, "weblogic1");
File contentFile = new File("C:/toding/mypro/UCM/test.txt");
String parentPath = "/new/test/multiThreadUpload/";
String location = makePath(parentPath);
manager.saveContent(properties, contentFile, location);
System.out.println(location);
Thread.sleep(5000);
} catch (Exception e) {
e.printStackTrace();
flag = true;
public static void main(String[] args) throws Exception{
ThreadPoolExecutor executor = new ThreadPoolExecutor(10, 10, 60, TimeUnit.SECONDS,
new LinkedBlockingQueue<Runnable>());
for(int i=0; i<10; i++) {
UploadTask uploadTask = new UploadTask();
executor.execute(uploadTask);
while(!flag) {
Thread.sleep(5000);
executor.shutdown();
public static String makePath(String parentPath) {
StringBuilder buf = new StringBuilder();
buf.append(parentPath);
if(!parentPath.endsWith("/")) {
buf.append("/");
Calendar rightNow = Calendar.getInstance();
String pattern = "yyyyMMdd";
SimpleDateFormat simDateForm = new SimpleDateFormat(pattern);
String dateStr = simDateForm.format((rightNow).getTime());
pattern = "HHmmssSSS";
simDateForm = new SimpleDateFormat(pattern);
String timeStr = simDateForm.format((rightNow).getTime());
buf.append(dateStr);
buf.append("/");
buf.append(timeStr);
buf.append("_");
buf.append(random.nextInt(10000));
String finalLocation = buf.toString();
return finalLocation;
private static SecureRandom random = new SecureRandom(); -
Why there is no output after running the procedure
Hello everyone,
SQL> set serveroutput on size 1000000
SQL> set echo on
SQL> set feedback on
SQL> declare
2 n number(19);
3 v_startday varchar2(100) := '7/1/2013';
4 v_owner varchar2(100) := 'SLIMSINTDM';
5 v_audit_tab audit_var := audit_var();
6 v_table_name varchar2(40);
7 type cur_type is ref cursor;
8 v_cur cur_type;
9 v_first_name varchar2(100);
10 v_last_name varchar2(100);
11 v_out_tab varchar2(100);
12 v_lab_code varchar2(10);
13 v_sql varchar2(20000);
14 v_sql_1 varchar2(10000) := q'[
15 select distinct au.first_name, au.last_name,
16 :v_table_name table_name, lab_code
17 from laboratory l
18 join app_user_security aus on AUS.owning_lab_id = l.lab_id
19 join app_user au on AU.APP_USER_ID = AUS.APP_USER join ]';
20 v_sql_2 varchar2(10000) := q'[ t on (t.ADDED_BY = AU.APP_USER_ID
21 or t.last_modified_by = au.app_user_id)
22 where lab_locale = 'en_AU'
23 and (t.added_date > to_date(:v_startday, 'MM/DD/YYYY')
24 or t.last_modified_date > to_date(:v_startday, 'MM/DD/YYYY'))
25 order by last_name, first_name
26 ]';
27 begin
28 n := 0;
29 for i in (select table_name from all_tables where owner = v_owner order by table_name)
30 loop
31 v_table_name := substr(i.table_name, 1, instr(i.table_name, '_JN') - 1 );
32 -- dbms_output.put_line('v_table_name: ' || v_table_name ||' ; i.table_name: ' ||i.table_name);
33 v_sql := v_sql_1 || i.table_name || v_sql_2;
34 -- dbms_output.put_line(v_sql);
35 begin
36 open v_cur for v_sql using v_table_name, v_startday, v_startday;
37 loop
38 fetch v_cur into v_first_name, v_last_name, v_out_tab, v_lab_code;
39 exit when v_cur%NOTFOUND;
40 n := n + 1;
41 v_audit_tab.extend;
42 v_audit_tab(n) := audit_type(v_first_name, v_last_name, v_out_tab, v_lab_code);
43 end loop;
44 close v_cur;
45 exception
46 when others then
47 if sqlcode = -1030 then -- insufficient privs
48 dbms_output.put_line('No privs for ' || USER || ' on ' || i.table_name);
49 -- exit;
50 end if;
51 end;
52 end loop;
53 for x in (select * from table(v_audit_tab))
54 loop
55 dbms_output.put_line (x.first_name ||','||x.last_name||','||x.table_name||','||x.lab_code);
56 end loop;
57 end;
58 /
PL/SQL procedure successfully completed.
Question here , developer can't find any output (results) as expected after running this procedure, so is ther anything wrong?
Thank you very much.There is a good chance that there is another error other than -1030 but it is going into the bit bucket never to be seen. Check out Oracle Magazine articles on PL/SQL (http://www.oracle.com/technetwork/issue-archive/index-087690.html) for some good coding practices. Part 6, PLSQL: Error Management is relevant to exception handling.
You could use a PRAGMA EXCEPTION INIT(InsufficientPriv,-1030); in the declaration section and then do the following:
EXCEPTION
WHEN InsufficientPrivs THEN
dbms_output.put_line('No privs for ' || USER || ' on ' || i.table_name);
WHEN OTHERS THEN
dbms_output.put_line('Other Error: '||SQLERRM);
END;
or following your example
exception
when others then
if sqlcode = -1030 then -- insufficient privs
dbms_output.put_line('No privs for ' || USER || ' on ' || i.table_name);
-- raise;if you want to exit this block and not continue.
else
dbms_output.put_line('Other Error: '||SQLERRM);
-- raise;if you want to exit this block and not continue.
end if;
end;
Maybe you are looking for
-
I am somewhat new to Flash and have been teaching myself through tutorials. I am working with Flash CS6 and have created a movie and exported it as an SWF onto my website. In the testing area in the program it works and the buttons link to the web pa
-
Populate Drop down values to Adobe forms
Hello, I am in the process of developing the HCM forms for PCR's. This is using old technology. How can I pass values to the Adobe forms based on certain condition selected in previous screen. For eg. Based on Position selected, I should have a certa
-
Cannot isolate first layer without effecting second layer: Ai CS4
I add second layer and draw some paths, I then use Selection tool on paths but this always activates the first layer even though it is not highlighted. The only method that seems to work is if I turn off the first layer completely using eye icon, whi
-
Just installed elements 11 but it will not open d7100 raw file, help?
Does elements 11 support d7100 raw files? I just downloaded and installed purchased version.
-
1003061 Unable to create thread [1] during parallel dataload
I am trying to load a planning app using EIS ... I am getting the cannot create error. I have 30720 for data cache setting and 10240 for index cache setting.. any idea to resolve this issue?? Edited by: pat2 on Oct 2, 2008 7:24 PM Edited by: pat2 on