After saving GRN part1 tab not get enabled

Hi,
All excise details get reflected in GRN from PO , i have entered all details such as excise number, Excise date etc related all data
excise.
But after saving GRN part 1 tab not got enabled which contains serial number , part1 number . which is not case of other GRN.
Please help me why this is so ?
Regards,
Rajendra D. Sawant.

Hello,
Please can you confirm are you working in ECC 6.0.
Please check the material and vendors are mentioned in J1ID table. If J1ID does not contain the material and chapter id combination ,then system will not give you, excise tab in MIGO.
And
After save of MIGO system will not show excise or part1 tab in MIGO display This is sap standard. you have to check in J_1IPART1 table with ref to Material doc number.
Regards
Mahesh Naik

Similar Messages

I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed

I was using firefox 5.0.1 & it was crashing frequently.I removed the installation & tried to reinstall.I getting a window asking for adminstrator password.Even after entering password,firefox was not getting installed

Sorry you are having problems. First of all try Fifrefox's safemode.
*[[Troubleshoot Firefox issues using Safe Mode]]
If that works post back for further advice.
Next step, if safe mode did not work.
<u>First: Try a clean install, <sub>(you have had a none standard version installed previously)</sub></u><br /> that involves deleting the program files. Then if necessary try troubleshooting by creating and using a clean empty Firefox profile.
See
* this recent post [/questions/940399#answer-377134]
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
<u>Second: try a New Profile</u>
*http://kb.mozillazine.org/Profile_Manager#Creating_a_new_profile
* this will be an additional profile, it is still worth backing up any existing or currently working profile on a regular basis
**[[Back up and restore information in Firefox profiles]]
* Until you are absolutely confident about the repercussions I suggest
** always use an empty folder when creating a new profile
** never delete or rename profiles, just disable or remove shortcuts
** after creating a new test profile open it and check for any addons or plugins that may be have been included by default

After ios5 update, I am not getting any sound when I play music.

After ios5 update, I am not getting any sound when I play music (iphone speakers or headphones). I get sound from games, previewing songs in iTunes, etc. Any idea why? I've resynced and shut down my phone and that didnt help.
iPhone 4

Beer,
is that when you want to play music over the air (airplay) like BT headset or something?
because i am facing the below issue in my car.
the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls.

Custom Tab not getting high-lighted

Custom Tab not getting high-lighted
Hi,
I have added a new tab TabX in Item Master data form.
When only my add-on is running, it is working properly:
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
TabX control is getting highlighted.
When my add-on runs with another add-on (DBS):
When I click on the TabX, all the controls belonging to the tab are displaying correctly.
But, TabX is not getting highlighted. Instead, some other tab(purchasing tab) is getting highlighted.
1) I'm not sure what is done by the other add-on.
2) I cannot debug my add-on when the other add-on is running. (Because we cannot get the other add-on installed in our office network. It is running only in client site.)
So, I need to 'guess' what might solve this problem.
Please help me if you know any work-arounds, so that I can highlight TabX (The normal effect of pressing a tab) in this situation.
Thank you.
Regards,
Geetha

Hi Geeta,
on FormLoad event,add the panelevel and set the panelevel of the Items.(must ber unique on that form)
OnLoadAfter(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
            AddNew_IndirectCost_Tab()
private void AddNew_IndirectCost_Tab()
                 oForm.DataSources.UserDataSources.Add("Folder", SAPbouiCOM.BoDataType.dt_LONG_TEXT, 100);
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("36");
                oNewItem = oForm.Items.Add("oFldrCost", SAPbouiCOM.BoFormItemTypes.it_FOLDER);
                // oNewItem.AffectsFormMode = true;
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width;
                oNewItem.Left = oItem.Left + oItem.Width + 50;
                oFolder = (SAPbouiCOM.Folder)oNewItem.Specific;
                oFolder.DataBind.SetBound(true, "", "Folder");
                oNewItem.AffectsFormMode = false;
                oFolder.Caption = "Indirect Cost";
                oFolder.GroupWith("36");
                oItem = (SAPbouiCOM.Item)oForm.Items.Item("60");
                oNewItem = oForm.Items.Add("LblMacCost", SAPbouiCOM.BoFormItemTypes.it_STATIC);
                oNewItem.Top = oItem.Top;
                oNewItem.Height = oItem.Height;
                oNewItem.Width = oItem.Width + 20;
                oNewItem.Left = oItem.Left;
                *oNewItem.FromPane = 222;*      // set pane level
                *oNewItem.ToPane = 222;*          //set panelevel
                oStaticText = (SAPbouiCOM.StaticText)oNewItem.Specific;
                oStaticText.Caption = "Actual Machine Cost";
on click of the your pane set the panelevel, like;
protected override void etClickBeforeAction(ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            BubbleEvent = true;
             if (pVal.ItemUID == "oFldrCost")                    // oFldrCost-My pane,
                 oForm.PaneLevel = 222;
The main thing is that you have to set the form's panelevel on click_before event and youe pane will be high lighted

Tab not getting focus on left-click after suspend in Windows 7 64-bit.

When I left-click on a tab in Firefox 4 rc 2 after my pc wakes up from suspend in Windows 7 64-bit the tab is not getting focus. I have to use the hotkeys in order to move to that tab. My mouse works fine in other programs.

I have an imac
I have an magic pad (same thing as the touch pad on a macbook really)
I have an usb mouse I use both in windows and osx
if your trackpad somehow was registered as actived for some reason it would seem as if it was the mouse
had some *** situations both in windows and osx when my cat sit on the magicpad

Window Focus Lost After Saving Page - Any Way To Get It Back With Keyboard?

I've recently begun using Safari for Windows after having used Opera for years, and have run into a problem with window focus that I didn't have with Opera. Specifically, if you save a web page in Safari, you then find that the following functions are no longer available from the keyboard:
1. Going back to a web page previous to the one that you just saved. Ctrl+[ does not function.
2. Performing a search. Ctrl+F does not function.
3. Scrolling to the bottom or top of the page. Ctrl+End and Ctrl+Home do not function. (For some reason, however, the PageUp and PageDown keys do still work in this situation.)
Why is this, and more importantly, is there a quick and easy way that you can, using only the keyboard, regain the window focus so that these functions will work again? I'm currently having to click somewhere on the page I've just saved in order to regain the focus. This is a nuisance.
Thanks for any advice.
George
Message was edited by: safwin

Thanks very much. Hitting 'Alt' button after saving the page does resolve the first (and most important) two of the three issues I listed above. FWIW, the Ctrl+End and Ctrl+Home functions only work in this post-save scenario (as I discovered by experimenting a few minutes ago) if you hit the 'Alt' button twice (or if you do something else, like perform a search and then use Ctrl+End/Home).
By the way, before posting a few days ago, I had tried using the Alt+Tab method when I had two or more applications' windows open, and it didn't help. But, after reading your last post, I've found that if you use Alt+Tab when Safari is the only window open, then it does resolve the issue, although of course, as you've indicated, it's not actually necessary to hit the 'Tab' key.
Thanks again!
George
Message was edited by: safwin

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Warranty tab not getting displayed in service order

DEAR ALL,
I have an issue with crm services, I HAVE NOT ACTIVATED/USED INSTALL BASE IN MY SCENARIO AND HAVE CREATED PRODUCTS DIRECTLY/ DOWNLOADING FROM R/3.
NOW WHEN I MAKE A SERVICE ORDER THEN WHEN I ENTER THE PRODUCT (EG: FINISHGED GOOD) ITEM CATEGORY BEING YANN (TEXT ITEM CREATED BY US) THEN THE WARRANTY TAB IS NOT COMING UP.
when we add an expense item in the next line item warranty tab is getting displayed.
KINDLY HELP.
REGARDS,
AMIT

Hi for this u can use VCT but you to check for doc flow action settings and work flow before, then only you will get Guranty Data tab hope this will helpful
Regards
Venkat

After MRP planned orders are not getting generated?

HI,
Our bussiness is make to stock and repetetive manufacturing.
We have a prob in running MRP, i enter the demand in MD61 on day basis and after running MRP for some materials all planned orders getting generated wrt to demand but for some materials only some planned orders getting generated means it's not taking full demand ex i have material A and paln is 1000 for 10days i entered demand in MD61 for 10days 100 each and if B material is having same 1000 demand so i enter 100 each then i run MRP and the out put is im getting 10planned orders with 100 each qty for A material where as for material B im not getting full 10 orders only 2 or 3 with 100 each what could be the reason ?
Thanks
KK
Edited by: kiran kumar on Mar 23, 2010 10:19 AM
Edited by: kiran kumar on Mar 23, 2010 10:20 AM

Dear Kiran,
As your saying it is Make to Stock, system will consider Availble stock in Net Req. Calculation
what is startegy mainatined for A & B
if you go with Strategy 11 then system will not consider the stock & Creates the requirements
Regards
Madhu

Every time I change password access control to allow access, it reverts after saving. How do I get the saved change to "take"?

Outlook keeps asking me to either use the login keychain or to use confidential information connected with my email password. I went into the keychain passwords in KeyChain Access, changed the access control on each of them to allow Outlook access. I saved the changes, but then they all reverted to their previous setting.
There is an older Keychain Access file in the Control Panel that will not open because it's either "damaged or corrupted". If I delete that, would it make a difference? What can I do to keep my access control changes when they won't stay saved?

I do not have the disc to reload
Why not? You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your profile.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
===============
I have to have the password, which I cannot remember or find.
When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out.
Old school--- > Print it out & keep in a safe place. A place that ONLY you know about AND never forget.
New school---> Get a password manager utility. Highly recommend 1Password which is shareware. Do a Google search for free password managers.

After clicking "run" I do not get the setup wizard; I get a firefox setup stub 26.exe file in my downloads folder...?

After opening the stub file I get a message asking if I want to allow the following program to make changes to this computer. After clicking "YES" the message window closes, a smaller message window flashes on and off, followed by nothing...

I tried this and nothing happens when I click on the language. I had the program on mu CPU for years and I had to uninstall it 2 days ago and now it will not let me put it back on. HELP

History Tab Not Getting Populated

As i Edit / inspect any assets in the WebCenter Sites the History Tab is not getting pouplated with the edited Assets. The Histroy Tab is visible to me, However there is no Data In it (Blank History Table).
I am currently using java 1.7.0_03-b05.

This is a known issue, bug 14341496. To avoid it please use java 1.6 on the browser.
Phil

Cisco Cius AnyConnect check box not getting enabled!

Folks,
Here we are evaluating the Cisco Cius, however, while trying to get the AnyConnect "check box" marked, it does not check it! Does anyone knows why? Anything specific done on CUCM? BTW, cucm 8.5.1. Any ideas?
Thanks,
Thiago Henriques

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

STO - Excise tab not getting displayed in material document after posting.

Dear all,
We are facing an STO issue where in after we have done the receipt at the receiving plant with excise, the excise tab does not display in the GR material document.
It is plant to plant stock transfer with excise, the process that we are following as given below:
1) STO PO - ME21N
2) Outbound delivery - VL10B - Post PGI in VL02N
3) Outgoing excise invoice - J1IIN - With the key DLFC.
4) GR - MIGO with excise invoice capture.
During GR posting in MIGO screen the system does display the excise tab, we enter the outgoing excise number and the corresponding values appear in BED, ECS and HCES. We post the GR material document.
But after posting the material document if we display the same GR material document it does not show the excise invoice tab. And since we are not having part 1 entry number we are not able to post the part 2 entry in J1IEX.
Request to please do let us know if we have missed out on any configuration or master data.
Regards,
mahesh.

Hi,
Do the all customization setting for CIN for reference check the following link for India. and Material management
http://help.sap.com/bp_bblibrary/600/BBlibrary_start.htm
You have to maintain Excise master data for material,vendor and PLant in J1ID .
reward if helpful,

First tab not getting "TabPanelTabSelected" class when tabs created from dataset

Greetings all. I've got a tabbedpanel widget whose tabs are
created with a spry repeat region. works great, except none of the
tabs get the "TabPanelTabSelected" class on initial load. I tried
setting the defaultPanel in the constructor, but to no avail.
here's the div that creates the tabs:
<div class="statustabs_TabbedPanels SpryHiddenRegion"
id="statustabs" spry:region="dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup"
spry:repeatchildren="dsRequestCounts">
<li
class="statustabs_TabbedPanelTab"
spry:hover="statustabs_TabbedPanelTabHover"
spry:select="statustabs_TabbedPanelTabSelected"
tabindex="{dsRequestCounts::@StatusID}"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>
</div>
and here's the constructor, which is done after the tab divs
are created:
<script type="text/javascript">
var statustabs = new Spry.Widget.TabbedPanels("statustabs",
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
</script>
So, the question is: how can i get that first tab, on load,
to take on the appropriate class so that it's styled appropriately?
thanks so much.
Marc

Thanks a lot Kin. I now have it working, mostly. I changed
the contentgroup div so that it repeated over the RequestCounts to
create the table. However, when I did that, obviously it drew the
table each time through the loop. So I changed the table's spry:if
to also look at the current status names for equality. only then
does it actually draw the table for the status that's been clicked.
the final version appears below.
Now, I do have two problems though.
1) I can no longer use the spry:loading state. If I have
this: <div spry:state="loading">loading...</div> right
under the "TabbedPanelscontentGroup" div, I get an error that
tpIndex is not defined. So...do you know how i can get this
functionality back?
2) One thing I needed to implement was "persistent" tab on
data refresh. I added a loadInterval on the RequestCounts dataset,
and thus everytime that interval was up the tab went back to the
first one. So in the updateRequests() function, i set a variable
named 'selectedTab' to the clicked rowid. Then, in the
tabObserver.onPostUPdate function, i have the dsRequestCounts
current row being set to that variable.
The only problem with this is that the "requests" dataset
then gets loaded twice when the interval causes the data to reload:
once for the first row, and then once for my 'persisted' row. This
makes sense, but i just don't know how to fix it. i'm pasting the
code into this post...maybe someone can see some way to get around
this?
Basically, the behavior I want is this:
a) on initial page load, load the requestCounts dataset and
use the first row of that dataset to load the requests dataset
(this works)
b) when a user clicks a tab, load the requests dataset with
the rowid of the clicked tab (this works)
c) when the loadInterval causes the RequestCounts dataset to
be refreshed, use the 'selectedTab' variable as the CurrentRow of
the RequestCounts data such that the Requests dataset is loaded
with the correct row and the selected tab is correct
So the only rpoblem i have is with c, and the only problem
there is that essentially what happens is the requests dataset is
loaded twice.
Thanks to any and all for advice getting the "loading" state
working and the refresh behavior correct!
--------------- here's the current code -----------------
<cfset request.cfcore = "/argus/dope/">
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<HEAD>
<TITLE>Spry widgets Samples One</TITLE>
<link href="/argus/dope/style/style.css" rel="stylesheet"
type="text/css" />
<link href="/argus/dope/style/widgets.css"
rel="stylesheet" type="text/css" />
<SCRIPT
SRC="/argus/spry/includes/xpath.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryData.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/includes/SpryXML.js"></SCRIPT>
<SCRIPT
SRC="/argus/spry/widgets/tabbedpanels/SpryTabbedPanels.js"></SCRIPT>
</HEAD>
<body>
<cfoutput>
<script type="text/javascript">
var selectedTab=0;
var loaded = 0;
var statustabs = new Object;
//datasets for the tabbed panel of requests.
dsRequestCounts = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestCountsXML.cfm?StatusesFromLast= 100&ServerGroupID=14",
"statuses/status",{useCache:false,loadInterval:20000});
dsRequests = new
Spry.Data.XMLDataSet("#request.cfcore#ajax/act/act_RequestsXML.cfm?StatusesFromLast=100&S erverGroupID=14&StatusID={dsRequestCounts::@StatusID}",
"requests/request",{useCache:false});
//for the tabbed panels
tabObserver = new Object;
tabObserver.onPostUpdate = function(notifier,data){
dsRequestCounts.setCurrentRow(selectedTab);
//alert("onpostupdate: " +
dsRequestCounts.getCurrentRowNumber());
statustabs = new Spry.Widget.TabbedPanels("statustabs",
{defaultTab:dsRequestCounts.getCurrentRowNumber(),
tabHoverClass:"statustabs_TabbedPanelTabHover",
tabSelectedClass:"statustabs_TabbedPanelTabSelected",
tabFocusedClass:"statustabs_TabbedPanelTabFocused",
panelVisibleClass:"statustabs_TabbedPanelContentVisible"
Spry.Data.Region.addObserver("statustabs",tabObserver);
function updateRequests(rowid){
dsRequestCounts.setCurrentRow(rowid);
selectedTab=rowid;
//alert("updaterequests: " +
dsRequestCounts.getCurrentRowNumber());
//statustabs.showPanel(rowid);
</script>
</cfoutput>

<div id="statustabs" class="statustabs_TabbedPanels
SpryHiddenRegion" spry:region="dsRequests dsRequestCounts">
<ul class="statustabs_TabbedPanelsTabGroup">
<li spry:repeat="dsRequestCounts"
class="statustabs_TabbedPanelTab"
tabindex="0"
onclick="updateRequests({dsRequestCounts::ds_RowID})"
>{dsRequestCounts::@StatusName} (<span
id="statustabcount_{dsRequestCounts::ds_RowID}">{dsRequestCounts::@RequestCount}</span>)< /li>
</ul>

<div class="statustabs_TabbedPanelsContentGroup">
<div spry:state="loading">loading...</div>
<div class="statustabs_TabbedPanelContent"
spry:state="ready" spry:repeat="dsRequestCounts">
<table class="requeststable" width="100%"
spry:if="{dsRequests::ds_RowCount}!=0 &&
'{dsRequestCounts::@StatusName}'=='{dsRequests::@StatusName}'">
<tr>
<th
onclick="dsRequests.sort('@RequestID','toggle')">ID</th>
</tr>
<tr spry:repeat="dsRequests"
spry:even="requeststable_even" spry:odd="requeststable_odd">
<td>{dsRequests::@RequestID}</td>
</tr>
</table>
<div spry:if="{dsRequests::ds_RowCount}==0">
Move along...nothing to see here
</div>
</div>
</div>
</div>
</body>
</html>

After saving GRN part1 tab not get enabled

Similar Messages

Maybe you are looking for