After saving project upon reopening one of my video files and it's corresponding audio is red

After saving project upon reopening one of my video files and it's corresponding audio is red (both are offline). Attempts at relink result in a warning that the audio will be deleted (which is does when tested).
This project is based on a multicam sequence (2 video files) and using Pro CC (latest Cloud build).
Anyone come across this and/or have a solution? Thanks in advance.

Appreciate your assistance and guidance Mark. Yes, I am a newbie on this forum - and fairly new to premiere pro though have used elements since version 4. I'll answer your leads below.
First off, some bookkeeping & jargon matters:
"you reported the file extension (.mts) but not the codec of the video therein. AVCHD?"
.mts files are Sony AVCHD files. filmed with Sony NXCAM NXU5 camera.
"re: the version you're on, rather than simply stating "the latest," it helps to report the exact version numbers as shown in the About box. That not only avoids any confusion today but also aids customers who come upon a thread months from now."
Version is 7.2.0
"you refer to "rendering" to a new format. I know that "render" is the right term in some NLEcosystems, but with Premiere we distinguish between rendering and exporting/encoding. Rendering is reserved for creating preview files for smoother playback within PPRO, whereas exporting/encoding covers writing a sequence out to an output clip."
My bad - I exported/encoded the sequence to a new output clip.
Now back to our regularly scheduled troubleshooting. Three questions:
did you start this project in CC7.1 and then update to 7.2/7.2.1 along the way?
I started this in 7.2.0
are either of the clips in the multicam sequence spanned?
I don't know what "spanned" refers to
I gather that you created the multicam sequence via the new workflow in the Project panel: select the clips, right-click>CreateMulticamSourceSequence. Am I right?
Correct
If so, please create a new sequence, set the timeline to insert sequences as individual clips (via the left-most button under the timecode control), add the multicam sequence to the new sequence, and post a screenshot of the timeline.
Now all of a sudden I am able to open my project file(s) as before with no problems.... very curious.
I did this and then could not find my multicam sequence.... so no screen shot... BUT what happened?
thank you for your guidance with this.

Similar Messages

Saved project from migration does not have video files? Will manually reloacting each video keep the editing intact on the project?

I had a computer crash but was able to manually drag over and save all my imovie projects. The corresponding videos did not transfer over during the migration. I have had to manually go in and re-import each of the video clips. Will the manually reimported clips automatically replace the missing files and keep the edits intact?
So for example, a missing file in the project has the first 5 seconds clipped off and some image stabilization. The project says I need to reimport the original source media (File X). I import File X so it is now in the library. Will imovie now recognize File X as the source media and automatically plug it in, complete with the cropped 5 seconds and image stabilization? If it is not automatic, is there a process I need to complete to accomplish this?
Thankyou very much for the help.

If you attempt to start a new project and import one of those files does it allow you to simply import them?

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after saving as from word 2007 - I uninstalled Pro X1 and now when I save as from word 2007 to PDF it will

Can anyone help with this - do I have to uninstall Reader and then reinstall?

I have had a trial version of Acrobat X1 Pro - I have decided not to buy at this stage - for some time it has been conflicting with opening PDF docs after "saving as" from word 2007 - I uninstalled Pro X1 and now when I "save as" PDF from word 2007 to PDF it will save the document as a PDF but will not open the document to display after publishing - I have to got to where the file has been saved to view the new PDF document - this is really annoying - do I have to delete adobe reader and reinstall it - adobe needs to look at this conflict with acrobat pro as I have even gone it to properties and tried to have adobe reader as the default PDF program - the main issue is that I cannot view the PDF after publishing it from word 2007

How to get video file and iTunes Extra to show as one file in iTunes?

When I purchase a movie in iTunes with iTunes Extras, after the download is finished in the "Movies" and "Genres" view they appear as one file. You click on the cover, it opens, shows the "Play iTunes Extra" button as well as a small Play arrow button next to the title to play the movie directly. Only in "List" view do they appear as separate files.
How can I achieve that for my own iTunes extra? I tried giving the .ite the same XID as the movie file but that didn't work, they continue to appear as separate files in iTunes and the little play button when expanding the iTunes Extra doesn't work obviously. Anyone can tell me how this is done?

Ok, I finally figured it out... there is 2 files that play a critical role in this
first is manifest.xml
in this file ensure that the library_item type string references the xid for your video file, and it has to be a proper xid. The iAd Producer manual explains how to create one if it does
example:
<library_item type="video" local_id="feature" xid="TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC" name="Your Movie"/>
second file and even more critical is iTunesMetadata.plist. There is a couple of strings in there that lace the iTunes Extra to the film and vice versa
<key>itemId</key>
<integer>987654321</integer>
<key>itemName</key>
<string>Your Movie - iTunes Extras</string>
The first is a unique 9 digit number that identifies your iTunes Extra file, the second is the name of the file that should follow the convention "Your Movie Title - iTunes Extras"
<key>playlistId</key>
<integer>123456789</integer>
<key>playlistName</key>
<string>Your Movie</string>
This is what ties it back to the movie file, we will come back to it later where in the movie MetaData you need to place this 9 digit string
<key>xid</key>
<string>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</string>
This is the convention in how to properly xid your iTunes Extra, it is your movie's XID with "_ITUNES_EXTRAS" added to the end of it
<key>Name File</key>
<string>Your Movie - iTunes Extras.ite</string>
<key>associated-adam-ids</key>
<array>
<integer>123456789</integer>
The first is self explanatory but the second is again this 9 digit number that you will need to place into the meta data of your movie. It is what will make iTunes lace the two files together
<key>xid-asset-mapping</key>
<dict>
<key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC</key>
<array>
<integer>123456789</integer>
</array>
<key>TEST:uuid:C7AE7CED-3F60-4C08-AA01-E3F9647B95CC_ITUNES_EXTRAS</key>
<array>
<integer>987654321</integer>
</array>
</dict>
This is the last critical piece, it laces the two files tigthly together. Now the 9 digit number counting down from 9 is part of the unique ID of the iTunes Extra, the 9 digit number counting up from 1 needs to be put into the metadata of your movie. The annotation type for this is "contentID".
That's pretty much it. If you did it right your files will now appear as one file in cover view just like a movie bought in the store.
The easiest to do this right is to grab the manifest.xml and iTunesMetadata.plist from an iTunes store movie and copy paste and edit it for your purposes, which is what I did.
Cheers everyone!

I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
http://www.thexlab.com/faqs/trash.html

How can one read a Excel File and Upload into Table using Pl/SQL Code.

How can one read a Excel File and Upload into Table using Pl/SQL Code.
1. Excel File is on My PC.
2. And I want to write a Stored Procedure or Package to do that.
3. DataBase is on Other Server. Client-Server Environment.
4. I am Using Toad or PlSql developer tool.

If you would like to create a package/procedure in order to solve this problem consider using the UTL_FILE in built package, here are a few steps to get you going:
1. Get your DBA to create directory object in oracle using the following command:
create directory TEST_DIR as ‘directory_path’;
Note: This directory is on the server.
2. Grant read,write on directory directory_object_name to username;
You can find out the directory_object_name value from dba_directories view if you are using the system user account.
3. Logon as the user as mentioned above.
Sample code read plain text file code, you can modify this code to suit your need (i.e. read a csv file)
function getData(p_filename in varchar2,
p_filepath in varchar2
) RETURN VARCHAR2 is
input_file utl_file.file_type;
--declare a buffer to read text data
input_buffer varchar2(4000);
begin
--using the UTL_FILE in built package
input_file := utl_file.fopen(p_filepath, p_filename, 'R');
utl_file.get_line(input_file, input_buffer);
--debug
--dbms_output.put_line(input_buffer);
utl_file.fclose(input_file);
--return data
return input_buffer;
end;
Hope this helps.

How to synchronize if one servlet read a file and anothe servlet update the

How to synchronize if one servlet read a file and anothe servlet update the file at a time?

Create a class that holds the reference to the file and do the whole file manipulation just in that class. than synchronize the read and write methodes. A reference to this file handler class can be stored to the servlet context in one servlet and read out from the servlet context in the other servlet.

At the momment i only pay a month to month after effects subscription for $29usd i am a video editor and only use After effects, premier, photoshop and Illustrator whats my best option, do i upgrade, cancel. what todo?

At the momment i only pay a month to month after effects subscription for $29usd i am a video editor and only use After effects, premier, photoshop and Illustrator whats my best option, do i upgrade, cancel. what todo?

You can upgrade to full CC, please check for the options & price here.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Cloud-based creative software and services | Adobe Creative Cloud
How to upgrade from a single app membership to complete Creative Cloud
Manage your membership and payments | Creative Cloud
Please let us know if you have any further queries.
Regards
Rajshree

I just split my channels and then I drag one into a duplicated file and it is then is corrupted. Why?

I just split my channels and then I drag one into a duplicated file and it open
up corrupted. Why? !

This is a known issue and should be fixed in 5.1.

HELP! My After Effects project is complete, but when I render out and playback the video is a lot faster then the original playback.

I have finished my After Effects project. The project includes a lot of text and fade ins and outs and looks perfect in the playback. But once I render and playback with Quicktime the video does not look the same. The animations are very jumpy. Please help!
Thanks,
David V

Hey David,
Also, my AE comp is 29.97, but i have four other comps in that one and they're 23.97 fps.
It seems like that would be the likely culprit. Is there a specific reason those comps (which are, I assume, nested inside the 29.97 one?) are 23.976? Do they contain 23.976fps footage? Mixing of comps, video and different frame rates can often cause juddery playback after rendering, as the interpolation of the frame rates to the master render frame rate happens without any interaction on the user's part. But AE gives many different options (and techniques, everyone has their own) to assist with getting the frame rates and speeds more aligned so the final frame rate is perfect for them all. It takes a little planning, that's all.
Let me know, I'll be glad to help if this is the issue.
Steve
Steve Holmes
Creative Director
Energi.design, Munich

RoboHelp HTML 10 is taking one of my topic files and copying it multiple times.

I am using RoboHelp HTML 10 to update a reference project with about 1,500 topics in it. Today, I created a new topic with several internal bookmark links. I have edited this topic file several times and saved it without any problems but late today, when I wanted to save the file and close the project, RH gave me an error message about the file name being too long and the TOC reference was too long. This error message repeated over and over so I used Task Manager to kill RH and I rebooted my PC. When I got RH running again, I discovered 40 copies of the topic file listed in the Project Manager window. Each file name is a unique creation made up of the original topic file name and one or more of the internal links. Here is a sample of the names:
Ultimate_Data_Display.htm (topic file with several bookmarks)
Ultimate_Data_Display.htm#View_Data (no .htm suffix - when I open one of these files using NotePad, the file contains an exact copy of the original html code)
Ultimate_Data_Display.htm#View_Data#Detailed_View
Ultimate_Data_Display.htm#View_Data#Detailed_View#Summary_View
The file names get longer and longer until the 260-? character limit is reached.
RH appears to be parsing the topic file, pulling out the bookmark code, concatenating various bits together and then saving copies of the original file under these new names. Perhaps this is occuring because of some interaction between RH and the version control system we are using. However, I don't know what version control system we have. I have a "source folder" on my local desktop and RH is doing some type of checking in and checking out of all the files that I work on.
Any suggestions on how to stop this problem would be great, as I have several new topic files to create over the next few work-days.

This is a new one on me.
Have you tried deleting the CPD file and then working on the project?
Where is the project located?
Does your working environment have a backup tool running all the time, such as Memeo?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Two Apple IDs one one computer sharing music files and want both to have iTunes match for iPhones

My wife and I share one windows computer. We each have our own iTunes accounts but share the music files. We want to both use iTunes Match but I can't turn that on on both accounts. Any thoughts?

You want to use iTunes Match on what devices? As you are aware it is not possible to have iTunes Match enabled for two iTunes Store accounts on the same computer, since any one device can only be associated with one Apple ID every 90 days. This applies to iOS devices as well as computers.
iTunes Match is designed to be a single-user service that is never signed out. So there are no easy solutions to your situation. If one of you enables iTunes Match on one Apple ID and the other re-downloads anything from your purchase history or has an automatic download happen that will initiate an Apple ID re-association for the device and will lock out the other account for 90 days.
On iOS devices, it can only be signed into one Apple ID every 90 days for same reason. At this time you've really only got a couple of solutions: Abandon one iTunes Store Apple ID and only use one for all devices; or, purchase a new computer and have separate iTunes Match accounts.

Convert Video files in iTunes but no Audio after converting

Hy, do somebody know what is the matter if i want convert Video files in iTunes (8.01) but after converting the files don't have any audio but i can see the movie perfect in iTunes and on ATV ????

Your likely using muxed video such as mpeg1/mpeg2, which is capable of being played back in QT (with the QT mpeg2 playback component in the case of mpeg2 source video) but not able to be converted.
I could well guess which software you should use to undertake your conversions but it would be better if you could provide details of our source video so that we can suggest an appropriate workflow based on that information.
You can use the Inspector window in QT to see this information.

My documents on ipad 3 closes everytime I try to open it.it happened after I did an update last week.all my files and folders seem to be lost.how can I fix this?

What can I do my documents keep closing when I tried to open it i have updated it last week and now it seems like it is not working.what cud the problem be?

Can you start Firefox in [[Safe mode]] ?
You can also do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can initially skip the step to create a new profile, that may not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After saving project upon reopening one of my video files and it's corresponding audio is red

Similar Messages

Maybe you are looking for