After Scanning a document, cannot save it in Acrobat X with Windows 7

Using Windows 7 a Kodak i40 scanner and Acrobat X Pro. Document scans normally and image appears in Acrobat, however when selecting save or save as, nothing happens. "Save as" does not open any windows. If you try to close the document, it asks if you want to save it, click on yes and it does nothing, then try to close and the "do you want to save" message appears again and document is not saved. Anyone else see this or have a suggestion for a solution?
Bob

As a work-around, I am able to select custom scan but you have to choose your scanner and after doing that click the options and change scan mode from native to memory. This will allow you to scan and save or "save as" but after you close Acrobat the settings will revert back to what they were before. I have even configured and saved presets with these same options but these settings are never saved when i close and re-open Acrobat

Similar Messages

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. "

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

After scanning my document and converting to Microsoft Word the size of characters are different

After scanning my document and converting to Microsoft Word the size of characters are different and things like puntuation are distorted. How do I get the uniformity like the original?

Of course what lands in the Word file will differ from the viewed picture/image of text created by the scanner.
(The output of all scanners is always an image file. For an image of textual content the best output file format is TIFF.)
So you scan the hardcopy of text.
The scanner output image (picture) is brought into PDF.
At this point the only PDF page content that you can export to Word is the image (nope, no "text" just the image).
Consequently you use Acrobat's OCR feature to do OCR of the image of text.
With a decent paper source, proper resolution and a black and white image you'll get acceptable accuracy of recognition of the pictures of the characters.
(the Optical Character Recognition)
Acrobat's Searchable Image and Searchable Image (Exact) provides output that used text rendering mode 3 (no fill, no stroke for the glyphs).
So, invsible / hidden text.
The third OCR method is ClearScan.
You could play with each of the three to see what goes into a Word file.
Might try export to RTF, DOC and DOCX as well.
Anyway -- What is exported is the OCR output; Not the image of text.
And, of course, the image of the text is not the imprint on the paper that was scanned.
Each step to the way you have some deviation.
Once you have the exported PDF content in a Word file you can use Word to cleanup as desired / needed.
OR
Prop up the hardcopy and transcribe to a Word file.
Be well...

Acrobat 11.0.07 immediately crashes after scanning a document to PDF on my Mac.. this occurs after a recent update!

Why is acrobat 11.0.07 crashing on my MAC immediately after scanning a document to PDF. I have not had this problem until after a recent update . The scanner is a HP 8600 Officejet Pro....

Hi Steve
There is a known issue with Acrobat 11 and it is specific to network/shared scanners and Mac OS 10.9. We have logged a bug in our database and we are working with Apple to resolve this issue. The workaround would be to connect the scanner via USB.
Thanks
Varinder

How to I scan a document and save it to my computer?

I just bought a PIXMA MG2920. How to I scan a document and save it to my computer? There is no buttons on the front, just the print buttons.

Hi jmkj1234,
To scan with your PIXMA MG2920, the IJ Scan Utility can be used. To view how to scan, please use the following link:
http://ugp01.c-ij.com/ij/webmanual/ScanUtility/W/MG2900%20series/1.1/EN/SU/su-004.html
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with my Ipad,

Hi, Need help about ios7 upgrade, after this upgrade I cannot watch youtube or any video with Ipad, and Iphone as well
I think my wireless rooter's setting has some problem but cannot found anything to solve,
I can watch if there is another wireless network , I tried this option in another place who has wireless network and I can watch.
Do you have any idea to do these setting , I dont have any problem when Ipad has 6.1.3 IOS,
need help
thanks

Thanks
I will and share the result.

Set PDF Document Properties Initial View by Acrobat SDK with C#

Hi,
Here am trying to set the PDF document initial view by the Acrobat SDK with C#.
Here I am show my screen shot which properties I want to set.
For this process I am referred Acrobat SDK and also following Adobe forums they also asked similar question.
http://forums.adobe.com/message/3866361
http://forums.adobe.com/message/4803264
http://livedocs.adobe.com/acrobat_sdk
And also I am used following C# code
      Acrobat.AcroPDDocClass doc = new Acrobat.AcroPDDocClass();
      doc.Open(@"D:\..\sap.pdf");
doc.SetOpenInfo(1,1,"Fit Width");
      doc.SetPageMode(3);
      doc.Save(1, @"D:\..\sap.pdf");
      doc.Close();
From the above code {doc.SetPageMode(3);} is working for set the page mode.
But I am having problem in following code {doc.SetOpenInfo(1,1,"Fit Width");}
Because it won’t work I do’t known, and there is no clear samples in the SDK reference document.
So please give advice and clear sample code/syntax to meet above needs which are marked in red box.
Document Properties - > Intial View
Document Option
     Show: Bookmarks Panel and Page
     Page Layout: Continuous
     Magnification: Fit Width
Window Options
     Show : Document Title
Regards,
Thirusanguraja Venkatesan

ok thank you Test Screen
I will try and let you know if i am done by automation .
Regard,
Thirusanguraja Venkatesan

Cannot install HP Photosmart 2610 Driver with windows xp

cannot install HP Photosmart 2610 Driver with windows xp. keep getting registry error messages part way through the instal.. any suggestions? Thanks

Hello,
Please check if you have an ADMIN rights to log into your PC.
Else, create an ADMIN user account and then run the installation ,
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How to set document cannot save as in content Management in Portal

Dear Sir,
Is it possible to set document in content managment in Portal cannot "save as" in content Management in Portal, because our requirement need cannot save and save in document.
Please advise.
thank you and best regards,
Vimol

Hi,
Content Administration -> Portal Content--> double-click the role you want to set priority to- click properties and find Sort Priority.
Refer this link, it will explain you...
http://help.sap.com/saphelp_nw04s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
Regards,
Senthil K.

I get prompted to select a scanner and a scan profile/preset each time I try to scan a document to PDF using Adobe Acrobat Pro.

Hello,
I have a fujitsu scanner (fi-6140) connected to my computer and have the "Scan" button on the scanner associated with Adobe Acrobat. And so when I press the "Scan" button on the scanner to scan a document, it launches Adobe Acrobat Pro automatically. Then I get prompted to select a scanner/device and a scan profile. It seems to remember the last-used scanner/device, however; it still prompts me each time to confirm the scanner/device selected and select a scan profile to use. Is there a way to save both the scanner & scan profile information and so when I click the "Scan" button, it doesn't prompt me to select but starts scanning using the last-used settings automatically?
Thank you.

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

I cannot save photos from a webpage with a right click. Why not?

I cannot save photos from any webpage using a right click on Firefox, so I must open Internet Explorer to do that, yet my friend can do it on FF with his computer. Why is that?
== This happened ==
Every time Firefox opened
== I installed firefox

Issues with the right-click context menu not working can be caused by the [http://toolbar.yahoo.com/ Yahoo Toolbar] (Tools > Add-ons > Extensions)

Cannot get IPod to properly communicate with Windows or ITunes

I just bought a used 20GB G4 Ipod off of EBay. I have never owned an IPod but have been using ITunes 6.04 for awhile, using it as an organizer for my ripped MP3's and a few songs purchased on tunes. I first tried to install the IPod software from the CD that came with the IPod. The IPod software installed fine (or so it appeared) but the installation program did crap out after telling me that I already had a newer version of ITunes installed.
I tried to get my IPod to be recognized by Windows/ITunes that first night but had no luck. I was not sure if I was being too impatient or not, so finally let things just run and went to bed. When I got up the next morning my IPod battery was completely dead. I then read some stuff here and got a little better idea of what I was doing.
The IPod and it will boot up by itself, but has no songs on it. I have not tried to run any diagnostics on it - are there some? I have determined that the IPod menu tells me that it is Windows formatted.
Since then I have downloaded the latest version of the ITunes software. Here is what happens for me now. I uninstall the ITunes and IPod software and then reinstall them. I don't think the order of installation matters to my outcome, as I have done this both ways. After a fresh reboot I connect the IPod to the USB port on my compute. Windows recognizes that a USB device has been attached, and recognizes it as an Apple IPod USB Storage Device (I didn't write down the exact wording, but IPod is definitely part of it). After some disk chugging I get a message from the Windows USB handling software that I may need to reboot for the device to work. I then get a message from Apple software saying the same thing. I reboot my computer and it hangs on reboot if I leave the IPod connected. I disconnect the IPod and let Windows reboot. When Windows is back up I connect the IPod. Windows recognizes the USB device being plugged in but this time it thinks it is a generic USB storage device, no mention of IPod. If I'm patient after awhile I will get a message from ITunes telling me my IPod needs to be reformated. I click yes (or OK or whatever) and the IPod Update software starts. It just sits there. If I leave it overnight it will drain my IPod battery. But I never get the upgrade or restore options. And I have on occaision gotten a "can't mount IPod" message.
So am I doing wrong? Is it possible my IPod was damaged in shipping? How can I tell? Is this just Steve Jobs getting even with Bill Gates (at my expense)? Is the IPod the root of all evil or the greatest thing since sliced bread?
P.S. I do not know if it matters or not, but I have a Zen Micro and all of it's associated software installed on my machine as well.

I did get mine to communicate with Windows finally. I uninstalled both the Ipod software and ITunes. I then setup the Ipod with the original CD it came with. After that I upgraded first to the newest IPod softare and then to ITunes 6. I'm getting an error -69 while transferring files now, but the communication between the Ipod and Windows is there now.

CANNOT install Canon MF 4880 software with Windows 7

I am attempting to wirelessly connect my laptop to a Canon MF4880 at my office. The printer, which is an older model, is already connected to the desktop here (Windows XP) and has no problems. The software that came with the printer is not compatible with Windows 7 which I have on my laptop. I have worked on this countless hours and tried everything I can think of.
I thought I found the answer today when I downloaded the Windows 7 drivers from this site (which I have done before) but this time I was prompted to allow them on my Firewall. Still no luck. I got as far as downloading the updated drivers, but when I run the setup, the printer doesn't show up on the network so I can't get further than that.
Could there be an issue with the sharing settings on the desktop?? I don't know what else do do.
Any suggestions would be greatly appreciated.
Thanks!

Thank you for your reply DrMarieDC.
Please follow the instructions below to try and add the printer by configuring the port settings:
1. Open the printer folder.
From the [Start] menu, select [Devices and Printers].
2. Right-click the icon for the machine and select [Printer properties] (or [Properties]), then select the MF4800 Series UFRIILT.
3. Click the [Ports] tab.
4. Click [Add Port].
5. Select [Canon MFNP Port] for [Available port types] and click [New Port].
6. Click [Auto Detect].
NOTE
When you cannot perform Auto Detect:
Enter the IP address or MAC address of the machine manually.
7. Select the detected printer and click [Next].
8. Click [Add].
9. Click [Finish].
10. Click [Close].
11. Click [Apply], and then print.
If the error persists, I recommend that you contact us at 1-800-OK-CANON (1-800-652-2666). The real time feedback of a live technical support call would be very beneficial in this case.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Why modification protected PDF documents cannot be indexed by IFilter 11 with SharePoint Search?

Hello everyone!
I have a SharePoint farm which stores a big number of protected PDF documents. Those PDF documents are protected against modification and printing! They allow copy of content and screen readers though.
I had IFilter 9.0 installed and I saw that none of my protected documents could be found... I decided to upgrade the IFilter to its latest version (11) in order to be sure it was not something which was already fixed.
Problem is that even with IFilter 11, my protected PDF documents are still not indexed! Is that a limitation of the IFilter? What kind of security configuration does the IFilter component supports?
Thanks in advance for your help!!
Carlos

I will try to be the most complete possible on the security settings of my document:
I do NOT ask a password in order to open the file
I do ask a password in order to modify the document:
Printing allowed: NONE
Modification allowed: NONE
Activate the copy of the text, pictures and other content: Checked
Activate the access to the text by screen readers: Checked
Options
Compatibility is set on Acrobat 7 and later
Encrypt the entire document option is checked
When I apply those settings, save the document and then open the security settings tab with Acrobat Pro I see that everything is forbidden except the three following options:
Copy of the content
Copy of the content for accessibility
Extraction of the pages
When I close the document and open it again with Acrobat Pro or Reader I see that only two options are enabled this time:
Copy of content
Copy of content for accessibility
So basically it seems the PDF document looses the Extraction of the pages privilege once I close Adobe Acrobat Pro.
PS: I am translating the security options from French so they may not be the exact ones you see on your Acrobat Pro if you have it in English.

I cannot save pdf. I'm using Windows 7

I recently purchased a new computer running Windows 7. Every time I try to save a pdf document, nothing happens. I click on the save icon on the bottom floating display but it does not respond when being clicked on.

F9 does not do anything. By menu bar, I am talking about icons only.
There is no actual menu visible like in Windows.

After Scanning a document, cannot save it in Acrobat X with Windows 7

Similar Messages

Maybe you are looking for