After sec. update 2008-007, Spaces does not function correctly

I installed the 2008-007 Security Update last night, and after restarting, I have found that spaces won't work correctly.
I have different apps set to different spaces, such as iTunes in 4 and safari in 2. If I'm in Safari, and use command-tab to switch to iTunes, the menu bar changes, and the keystrokes behave as if I'm in iTunes, but the screen won't change to that space; I have to do that manually (ctrl-arrow or hot corner).
Is this happening with anybody else out there?

There's more than one type of reset ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Similar Messages

Mac Mini will not boot after Security Update 2008-007

Hello,
A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

Hi Arkku , and a warm welcome to the forums!
I'd certainly give Sig's advice a try first.
If that should fail...
applesetupdone...
This was Posted by: JoseAranda at September 9, 2006 3:48 AM
"OK, restart your computer, hold down Command-s and type in the following:
/sbin/fsck -fy Enter
/sbin/mount -uaw Enter
rm /var/db/.applesetupdone Enter
# The rm command is the remove command which deletes the file.
# Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
reboot Enter
Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
end of posted by: JoseAranda"
Reset OS X Password Without an OS X CD...
http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

After delete iSCSI LUN vacant space does not become available

px12-400r, one pool on RAID10 (5,42TB).
Pool divided into 4 iSCSI LUN (2TB+2TB+1TB+0,42TB).
After deleteting one of them (on 2TB), this vacant space in tab "System Status" (over Web Interface) shown in the diagram as the free and "Amount of available space" on Status Bar 2TB (on Device Home Page over Web Interface),
but in tab "Disk Management" shows "Allocated/Available" - "5,42TB/0B" , and new volume or iSCSI LUN can not be added ("In any storage pool does not have enough space to add an iSCSI drive"
Storage in AD. Deleting iSCSI LUN over Web Interface under AD user with storage admin rights.
Rebooting storage did not help. What to do? How to return control of this free disk space?

Hello gusev67
To be certain that the iSCSI LUN was actually delete, please try this alternate method to check if the LUN is present and if so, deleted.
Go to Drive Management and click on the "volumes" section of your storage pool
Navigate to the iSCSI LUN that should have been deleted/removed
If it is present there, please click on the iSCSI LUN name to show the iSCSI information overview for the LUN, there click on the "delete" option.
If that does not seem to resolve the issue I recommend contacting LenovoEMC support regarding the problem.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

After open easy interactive driver mouse does not function in 10.6.8

When open the Easy Interactive drive to calibarate the pen mouse does not funtioning on Snow Lepoard.

hi there,
i get the exactly same error,
i can also print by Generic PLC driver,
or output a config test page by holding power and pressing red X once on the printer.
but i always get "drucker ist belegt" which means "printer is in use" error when i try hps mac osx K550 10.7 driver !
everything works (hp utility tools to calibrate etc. stuff) except for printing from whatever application i use
what the hell is happening here? and how can i get full funtionality back?
i already have Firmware version 20061019 SPP0013H which seems like the only one i could download-
but, although i would possibly need this firmware update-
there is no way to install the firmware update,
since clever people of HP decided not to leave a tool for osx lion users,
the manual for doing firmware updates is only written for 10.4.8 users (maybe half a dozen years ago?!)
i cant find a update firmware option anywhere although i see a firmwareupdate.task plugin which seems to be for hp printer utility.... but i cant use it sensefully ....
what are you up to? making me crazy? making people buy new stuff?
is there any solution in sight?

Shutdown does not function correctly

The shutdown function does not shut down PC. It cycles to the start page. This started after I installed HP Protect Tools.

What Bios version are you running?
Try the newest:
https://forum-en.msi.com/index.php?topic=161117.msg1185727#new
>>Use the MSI HQ Forum USB flasher<<
Included with the flash tool is memtest, run memtest first to verify no memory errors. You may want to perform the flash with a single stick of memory installed.
Let us know if this fixes the problem.
The next thing to try is see if it is the IMC, did you buy 2x 4gb kits or a 4x4 kit?
Try removing 1 kit, (Check s/n if nessesary) many people have issues with 4 sticks unless they are from the same batch.

Mac won't do anything after sec update 2008-008

My iMac gives only gray screen with apple logo and below, turning thing (circuling daches)
I have tried: - safe mode
- single user mode and gave the command fsck -fy (mac HD seems to be ok)
- it won't start from cd (cd doesn't even apear with the option key)
- Target disc works, I checked my disc with my iBook, no problems found.
I can safe my files but if it doesn't see my cd how do I reinstall?
Problems apeared right after the securityupdate from 15 dec, but can it be hardware too?
Please help.
Simon

Hi Robert Leyland...
If you have access to another computer (Mac or PC or whatever) and a USB pen drive, you can fix it using the method described by nishit7 in the last post in this thread:
http://discussions.apple.com/message.jspa?messageID=8733921#8733921
Remember to make a note of the name of the pen drive when you have it connected to the other computer.
Download the security update afresh here:
http://www.apple.com/downloads/macosx/apple/security_updates/securityupdate20080 08clientppc.html
I just applied the fix (running the security update in single-user mode) to a friend's Mac and it worked.
cheers
Steve West
PS. A preventative measure that has always worked for me in making sure software updates run smoothly:
1. Run Disk Utility and repair permissions before running Software Update
2. Quit all programs before running Software Update
3. Don't launch any programs or use the Mac for anything else while Software Update is running (this would be like driving your car with the mechanic still working under the hood)
4. Run Disk Utility and repair permissions again after the Software Update

After itunes update my ipod touch is not syncing correctly first I got error message..ipod failed to complete sync because connection was lost..now it wont sync new music

After recent itunes update my ipod touch 4 is not syncing properly...I got error message twice "ipod failed to sync properly because connection was lost, please try again"... it continued acting weird, now when i click on "sync now" it says preparing to sync, it goes through steps quickly says sync finished but it doesnt update.. can anyone help?

There's a good guide here on how to roll back to 10.7 https://discussions.apple.com/thread/4559563?tstart=0

Ran firefox update and now firefox does not run correctly.

I ran the latest firefox update 9Firefox Setup Stub 33.0). Now when I start firefox the browser opens and inside of it is black. I cannot see anything to use the browser. I have uninstalled and reinstalled with no luck. I have also restarted my computer. I have taken a screen shot of what it looks like.

Currently in version 33, Firefox has implemented a new, faster way of loading webpages. This new feature is called OMTC. However, there are still some tweaks Mozilla developers are making to this.
There is a known issue that Mozilla works on very hard to fix: if you are experiencing black webpages on some sites, here's what you can do to avoid the problem in the meantime:
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
To disable Hardware Acceleration
* Click the menu button [[Image:New Fx Menu]] and select ''Options''.
* In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
* In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
Now, exit Firefox, wait a few seconds, and then start it normally.
Please let us know if this solves the problem. Engineering is also gathering more information about the issue would request that you fill out [http://www.surveygizmo.com/s3/1851506/1c87a6cf309a this survey]
I should also mention that other users with this problem had an embedded intel hd graphics card with an old driver present. Until Mozilla comes up with a fix, if you want Hardware Acceleration in Firefox, you can try to update your driver through the appropriate link below to see if that helps:
Intel HD 2000/3000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23763
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23764
Intel HD 4000:
32bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24328
64bit https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24329
Thank you!

My Apple album discovery widget does not function correctly and I needed a little help from an expert

Hi,
I can't get my official iTunes album discovery widget from Apple.com to play audio on my website. If you hit view, it will take you to the iTunes page, which is very good, but if you press play on my website where I have the widget displayed, the buttons for play and stop move and seem to function, but no audio. I contacted Apple app software, but they said they are not responsible for their own widgets and to contact the Apple Support Community. I even put major label acts into the widget and they did not work either and I am thinking this could be a widget that just never worked correctly in the first place. I think it just needs a tweak to fix it in the code, but I can't figure anymore out.
http://widgets.itunes.apple.com/builder/ this is the link to get to Apple's widgets for itunes
this is my link on the website: http://www.woodshampoo.net/ just scroll down on the music page to check it out
Thanks,
missingsock

Hey missingrock,
Hope u get round to following this up. I had the same problem and got a quick response from sending message via phg console. They told me to install QuickTime Player and it worked fine for me. That is if your country has an iTunes Music Store.
Good Luck

Firefox does not function correctly when validating payments with HSBC bank

When HSBC bank security is invoked by a website within an inline page the confirmed page is presented within the inline subpage in such a way that one cannot continue with the transaction confirmation, consequently the payment verification fails. Google chrome, safari and explorer do not suffer from this problem. It makes using my favourite browser impossible whenever I need to security verify any payment on a number of websites.

That problem can be caused by the Yahoo! Toolbar or the Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

IMusic does not work correctly following iOS5 upgrade

After updgrade to iOS 5, my iMusic app does not function correctly. The bottom row of buttons do not display (Playlists, Songs, Artists, Albums). The More button will display the options, but when selected, the screen remains blank (black). I can display the album cover and the generic music note when playing music, but otherwise the screen remains black. When I rotate from portrait to landscape, a thin brown border cuts across the landscape screen at the same width the app was in Portrait.

Rebooting/restarting has not corrected this for me. It's easily repeated. The app needs some QA testing. The only way out of the blank/black screen for me has been to force quit the app. Rebooting the pad makes no difference.

Spry Menu Issues - Not functioning correctly in Microsoft IE

Hi there,
I am fairly new to web design and dreamweaver.
I have constructed a simple page that I am happy with complete with Spry Menu which again I am happy with. However this spry menu works perfectly in firefox but for some reason on IE my spry menu does not function correctly and goes all over my page!
CORRECT VERTICAL MENU - FIREFOX -
INCORRECT MENU FUNCTION! - IE -
See my CSS Code below for the spry menu in questions - if this helps -
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: inherit;
    font-size: 100%;
    cursor: default;
    width: 1000px;
    height: 47px;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: medium;
    position: relative;
    text-align: center;
    cursor: pointer;
    width: 318px;
    float: left;
    height: auto;
    background-color: #000000;
    border: 2px solid #FFF;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    padding: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: auto;
    cursor: default;
    width: auto;
    position: absolute;
    left: -1000em;
    font-family: "Palatino Linotype", "Book Antiqua", Palatino, serif;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
    width: 318px;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    margin-top: -5%;
    margin-right: 0;
    margin-bottom: 0;
    margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0px;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
    border: 1px solid #FFFFFF;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
    display: block;
    cursor: pointer;
    background-color: #bcbdb9;
    padding: 0.5em 0.75em;
    color: #FFF;
    text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
    background-color: #000;
    color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #000;
    color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarDown.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
    background-image: url(SpryMenuBarRight.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarDownHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
    background-image: url(SpryMenuBarRightHover.gif);
    background-repeat: no-repeat;
    background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
    filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inherit;
    f\loat: left;
    background: #FFF;
** I am also using Windows 8 and Dreamweaver CS6 If this helps.**
Any help with this would be fantastic as I need this to be resolved before the end of the week.
Any further information required please message me to find out.
Thanks,
Jamie

THE CONFLICT IS BETWEEN YOUR DOCUMENT CSS AND THE SPRY CSS.
It is because the <li> and <a> TAGS have been styled and therefore OVERRIDDEN THE SPRY CSS.
Use CLASS TAGS e.g. <li class="anyclass"> and <a class="anyclass">
and STOP USING THE <a> TAGS.
N.b. you may need to unstyle any <a> or other TAGS that conflict with the SPRY CSS. (However it's best to start over knowing that styling basic tags may affect the SPRY CSS).

Elements 12 Organizer not functioning correctly uploading files and viewing.

Elements 12 Organizer does not function correctly. It will upload new files but will not allow me to view correctly or edit. I attempts to reconnect files. When I attempt to do this manually it states that the files are already there. Very frustrating and Adobe representatives will not assist me.

Windows Media Player 12 is installed.
Windows Media Player
Version 12.0.9600.16384
Operating System
Version:
6.3.9600
System Locale:
en-GB
Service Pack:
0.0
User Locale:
en-GB
Build Lab:
9600.winblue_gdr.131030-1505
Geo ID:
United Kingdom
Type:
Workstation
DRM Version:
11.0.9600.16384
Architecture:
x86
Indiv Version:
2.9.0.1
Processors:
8
Video codecs are:
Type
Name
Format
Binary
Version
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Cinepak Codec by Radius
cvid
iccvid.dll
1.10.0.12
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.3.9600.16384
ICM
Microsoft YUV
UYVY
msyuv.dll
6.3.9600.16384
ICM
Intel IYUV codec
IYUV
iyuv_32.dll
6.3.9600.16384
ICM
Microsoft RLE
MRLE
msrle32.dll
6.3.9600.16384
ICM
Microsoft Video 1
MSVC
msvidc32.dll
6.3.9600.16384
ICM
proDAD Codec
pDAD
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.3.9600.16384
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.3.9600.16384
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2, VC1S
wmvdecod.dll
6.3.9600.16384
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.3.9600.16384
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.3.9600.16384
Windows Media Player plays .mps files without problems
Quick Time Player v7.7.4 installed (at suggestion from adobe premiere organiser). Will not play .mps files
Adobe Premiere 12 organiser will not play .mps files, editor will play and edit them.
Media Player Classic not installed

Security update 2008-007: not installing

I used 'software update' from the apple menu to download this security update of 31 MB yesterday.
It got downloaded and while installing (during shut down), there was an error message saying i need to contact the manufacturer.
Also in the window that asks to restart now or later - the enter/return button is not working for selection and it is working only while using the track pad.
next time when i use the software update, it does not start downloading (looks like the previous downloaded file is still in the buffer) and it straight goes to window asking for restart now or later.
and the same problem continues.
should i have change some setting?
also i tried to download the security update 2008-007 for client INTEL from apple downloads site (around 139 MB). this too indicated an error after downloading.
the last security update had changed the keyboard backlight set to off. i did not notice it initially.
later i noticed and wondered if the keyboard is damaged. after going thro the discussion forums, i went to the preferences and found the keyboard backlight not selected. after selecting it, it was okay.
any soultions please?

Q8MacNewbie wrote:
I used 'software update' from the apple menu to download this security update of 31 MB yesterday.
It got downloaded and while installing (during shut down), there was an error message saying i need to contact the manufacturer.
Also in the window that asks to restart now or later - the enter/return button is not working for selection and it is working only while using the track pad.
next time when i use the software update, it does not start downloading (looks like the previous downloaded file is still in the buffer) and it straight goes to window asking for restart now or later.
and the same problem continues.
should i have change some setting?
also i tried to download the security update 2008-007 for client INTEL from apple downloads site (around 139 MB). this too indicated an error after downloading.
Whoa - slow down there. That update is for Tiger. DO NOT attempt to use it with Leopard. You have to read the large print:
System Requirements
Mac OS X 10.4.11 Tiger
the last security update had changed the keyboard backlight set to off. i did not notice it initially.
later i noticed and wondered if the keyboard is damaged. after going thro the discussion forums, i went to the preferences and found the keyboard backlight not selected. after selecting it, it was okay.
any soultions please?
If you are remiss in applying the wrong updates, anything can happen and usually does.
Be very careful when doing things manually.
First, boot into Safe mode and at login screen select restart and let system reboot normally.
Down the CORRECT security update and install it.
I believe this is the one for you:
http://www.apple.com/downloads/macosx/apple/security_updates/securityupdate20080 07clientleopard.html
Message was edited by: nerowolfe

Macbook won't boot after installing Security Update 2008-007 (Intel)

I installed security update 2008-007 (intel) on my MacBook last night using Software Update, but now my machine won't boot at all. All I get is the gray start-up screen with the dark gray apple, but there's no spinning progress bar or anything. After 5 minutes or so, the machine auto-restarts, but again hangs on the gray start-up screen. It does this over and over again until I shut it off. I tried to boot into safe mode by holding down shift right after the chime, but it still wouldn't boot (again, not even a spinning progress bar). Can anyone please help me? I really don't want to lose my photos/movies, etc. I'll backup everything promptly if I can just get it to boot. Thanks.

Hi jared-lee, and again, a warm welcome to the forums!
First for safety, "Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
This may or may not fix the problem, but may.
Do you have another Mac around?

After sec. update 2008-007, Spaces does not function correctly

Similar Messages

Maybe you are looking for