After security update 2011-005, iMac fails to shutdown

Hi All,
I just upgraded my work computer running OS X 10.6.8 to latest security patch (2011-005), and after that my iMac can't shutdown anymore.
The process that is hanging is Apache Tomcat 6. Exactly org.apache.catalina.stratup.Bootstrap
We looked into System diagnostics and there is nothing there!
It looks to me that it has to do with permissions and dependencies, but I have no clue where to look!
PLEASE HELP!!!
Many thanks,
Sava

Don't remove any screws to do an SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Similar Messages

After Security update 2011-005 I my second monitor is black.

Hi Folks,
After security update 2011-005, I colud not get my second display working. I tried safe boot, didn't help, tried different resolutions didn't help. Reboot did not help either.
The second display is detected but it is black.
I am currently on MacOs10.6.8 running on my MacBook Pro.
Peace.

Don't remove any screws to do an SMC reset:
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

Finder restart every two seconds! After install security update 2011-005

After install security update 2011-005, I rebot my computer and every seemed normal, until I saw that started to restart the finder.
Help me! please.
PD: I try to delete the famous "com.apple.finder.plist" but I can't found them.
Is a MacBook Pro 13'' mid 2009 OS X Lion (10.7.1)

You may be able to repair this with 10.4.8 PPC Combo Update
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj
[email protected]

Could Security Update 2011-005 have caused WiFi slowdown?

I created this post earlier today:
https://discussions.apple.com/message/16156444#16156444
I just realized that both computers have installed Security Update 2011-005 just recently (right before this problem started).
Could that have caused the problem?

Could that have caused the problem?
Very unlikely. Millions of users have updated their Macs. The forum would be flooded with posts about this if there were an issue.
Did you completely power cycle your entire network after the update?

Mac shuts down after security update 2007-005

I installed security update 2007-005 and now after going to sleep the mac just shuts down. I have repaired permissions and run DiskWarrior. It just keeps happening.
Karen
iMac G5 Mac OS X (10.3.9)

Since I have installed security update 2007-003 and 4, DVD player was disabled. now that apple released security update 2007-005, I am now facing more serious issues with the entire system halting (the clock is frozen and the mouse turns into a beach ball... every once in a while)! I am beginning to suspect that the last three security updates need to be avoided at any cost since I have had so many problems with them!
So, in answer to your question, I would just run a clean install of OS 10.3, and never install security update 2007-004 and 5 until apple assures us that there are no more flaws in the security updates again!

Unable to see PC's on network after Security Update 2008-005

I just updated our Tiger server with the latest security update 2008-005 and now none of the PC's can see the Workgroup or the server. In addition, the Macs can no longer see the PC's on the network. The PC's can connect to other computers if it was previously mapped. However if we try to connect to the Workgroup, it is denied. Previously one PC's with the Windows Firewall turned on blocked all the PC's from seeing the Workgroup however it did not block Macs. This time viewing PC's is blocked completely and there are no PC's windows firewalls running. The macs can still see other macs and the servers (all Xserve's).

Issue resolved. It had nothing to do with the update. When I restarted the server it chose an NT computer on the network as the Master Browser. The resolution was to turn off the NT computer, restart the computer and let it pick up one of the 2000 or XP computers as the Master Browser. That worked.

HT6531 Anyone else getting kernel panics after Security update 2014-005?

I have a user with a brand new MBP, running 10.9.5 who installed Security Update 2014-005 on Friday morning. Ever since then, the machine has been crashing with kernel panics. We've done the usual Disk Util, etc. and it keeps happening. It would be terribly disruptive to have to rebuild the entire machine.

The links to Apple Support articles sometimes won't load in Safari.
Startup – Computer restarts by itself – Mountain Lion

PHP/MySQL issue after security update 2010-005

Hello,
I run Apache/PHP/MySQL on my MBP for testing Web sites.
After the 2010-005 security update I can't connect to my databases anymore.
I don't know how to fix this, I even don't know where to start looking.
Ideas, anyone?

coloma wrote:
etresoft, thanks for sharing this ... I decided to go with the TriangleJuice suggestion instead for two reasons ... first is that I wasn't sure where to find this launchd file.
There is nothing wrong with TriangleJuice's suggestion. My only issue with creating a php.ini file is that now I have to worry about all those other settings in the ini file. If something else in PHP breaks, I have to figure out if I am the one who broke it.
Apple ships MySQL with MacOS X Server. They probably adjusted the PHP settings to match how they have MySQL setup in MacOS X Server.
For MySQL's, no, Sun's - drat! no, Oracle's part, they still haven't acknowledged the fact that Apple has shipped MacOS X 10.4. MySQL still ships with a Startup Item. If you don't know where the launchd file is, it is because you don't have one. You probably have a MySQL entry in /Library/StartupItems or maybe /System/Library/StartupItems. Startup Items were deprecated in 10.4. Oracle should be creating a file named com.mysql.mysqld.plist in /Library/LaunchDaemons.
Here is what mine looks like now:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.mysql.mysqld</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/mysql/bin/mysqld</string>
<string>--socket=/var/mysql/mysql.sock</string>
<string>--basedir=/usr/local/mysql</string>
<string>--datadir=/usr/local/mysql/data</string>
<string>--user=mysql</string>
<string>--log-error=/usr/local/mysql/data/Pele.local.err</string>
<string>--pid-file=/usr/local/mysql/data/Pele.local.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
I also don't have a /var/mysql directory and wasn't sure whether I should just create one or if this meant my configuration was different. If you feel like explaining any of this, I'd be curious to know.
You have to create one. Such a directory probably already exists on MacOS X Server. Just make sure it is owned by mysql.
sudo mkdir /var/mysql
sudo chown _mysql:staff /var/mysql
sudo chmod 0755 /var/mysql
[jdaniel@Pele:516] /var $ ls -al /private/var | grep mysql
drwxr-xr-x 3 _mysql staff 102 Aug 26 20:03 mysql
Of course, /var is a symbolic link to /private/var. Long story there.

Trackpad not working after Security Update 2010-005

I just bought a new MacBook last week (white plastic one). After doing the Software Update last night for the security update the track pad no longer works. I have tried restarting holding the cmd + option + p + r and still no track pad. Any ideas? Is there a way to back out the update?
I connected a mouse via USB and that works. I tried changing some of the options under system preferences for the trackpad but still no luck.
Thanks,
Jeff

First run the hardware test from the original installer discs:
http://support.apple.com/kb/HT1509
If your data is backed up, just restore your backup.
If your data is not backed up, see this user tip:
http://discussions.apple.com/thread.jspa?threadID=1308817&tstart=0
Note, if that still doesn't work, your machine is likely still under the return/exchange period for most stores. You may want to just get an exchange if troubleshooting this issue takes too long.

Outlook from Office 2011 can't start after OS X Security Update 2014-005

I just installed Security Update 2014-005 on OS X v10.9.5 in a MacBook Pro (2012). After the OS restarts, Microsoft Outlook from Office 2011 fails to start. Did anyone else experience this issue and have a solution that can be shared?

Try u-installing Office and re-installing.
Office 2011 Removal
Office 2011 Removal (2)

Unable to Reboot After Latest Apple Updates (SA-2011-06-23-1 and Security Update 2011-004)

Hi All,
After applying today's updates (06/23/2011) in APPLE-SA-2011-06-23-1 Mac OS X v10.6.8 and Security Update 2011-004, my MacBook will no longer boot. Prior to updating, the MacBook workked perfectly (except for the occasional error entry in the system and kernel log). The MackBook model number is A1278, with a RAM upgrade (4 GB).
When booting in NORMAL mode, the grey screen with Apple logo (and spinning wheel) is shown for about 50 seconds. The device never shows the blue background or login window. It simply shuts down like the power was pulled.
When booting in SAFE mode, the grey screen with Apple logo (and spinning wheel) is shown for about 1 minute 30 seconds. The blue background is shown and quickly transitions to the login windows. About 45 seconds after the login window is shown, the machine shuts down like the power was pulled.
On the few occassions I logged in to take advantage of the 45 second safe mode window (before shutdown), I was *not* able to copy off my log files (in /log/var) to a thumb drive because the computer would not mount the USB device.
When I peeked at the system's log file, I caught the tail end of "signature validation failed" for a bunch of hardware - from video to audio. I can only peek because the computer will shutdown before I have an opportunity to study anything in detail. The failed verifications may or may not be related to the shutdown - signature verfication might be disabled in safe mode; I simply don't know.
It seems the world's most advanced operating system [tm] is performing the world's most epic failure. Any ideas to get this brick working again would be greatly appreciated.
Jeffrey Walton
Baltimore, MD, US

Here's what I've found:
(1) I cannot run Disk Utility because I don't have my install disk handy
(2) I cannot run Repair Permissions because Apple does not make a separate ISO available to fix their mistakes
(3) There does not appear to be a wat to back out updates (ie, no Add/Remove Programs)
I was able to boot into safe mode and perform:
> sudo bash
$ chmod -R root /
Amazingly, the command ran to completion. Unfortunately, it did not fix the problem. As soon as some spare cycles were available (interesting indeed!), the machine shutdown.
+1 to Apple engineers for creating a broken patch
+1 to Apple quality assurance for letting the junk out the door
+1 to Apple, for not offering an ISO to fix a broken installation
+1 to Steve, who has managed to keep his anti-trust lock on the hardware and broken software
Great job, Apple

VPN broken after 10.6.4 Update / Security Update 2010-005

I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
Sep 24 14:18:33 gateway racoon[90950]: Connecting.
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
Sep 24 14:19:03: --- last message repeated 8 times ---
Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
Which seems to be correct to me.
As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

I have a MacMini Server that was running 10.6.3 in use as a gateway for the last 3 or 4 months and everything has been working just fine. However, after applying 10.6.4 and Security Update 2010-005 the iChat and VPN services broke.
I was able to fix the iChat service by using serveradmin in Terminal - Server Admin was showing the correct name of the iChat server, but serveradmin reported a different (incorrect) name. My only guess is that one of the updates somehow changed that setting behind the scenes.
I have yet to be able to fix the VPN (L2TP) issue, though. I can connect internally (to 10.0.1.1) with no problem. I can connect with via iPhone over 3G no problem. I cannot connect externally from a 10.5.8 or a 10.6.4 client - any attempt always fails with a timeout. The VPN log shows nothing, but the system log shows:
Sep 24 14:18:33 gateway racoon[90950]: Connecting.
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: receive success. (Responder, Main-Mode message 1).
Sep 24 14:18:33 gateway racoon[90950]: IKE Packet: transmit success. (Responder, Main-Mode message 2).
Sep 24 14:18:36 gateway racoon[90950]: IKE Packet: transmit success. (Phase1 Retransmit).
Sep 24 14:19:03: --- last message repeated 8 times ---
Sep 24 14:19:03 gateway racoon[90950]: IKEv1 Phase1: maximum retransmits. (Phase1 Maximum Retransmits).
Sep 24 14:19:03 gateway racoon[90950]: Disconnecting. (Connection tried to negotiate for, 29.171451 seconds).
Sep 24 14:19:03 gateway racoon[90950]: IKE Phase1 Failure-Rate Statistic. (Failure-Rate = 100.000).
It would seem that the response to the initial handshake is being blocked. However, serveradmin has this to say about ipfilter:
gateway:/ *******$ sudo serveradmin settings ipfilter|grep VPN
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP - Layer-Two Tunneling Protocol:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: IKE NAT Traversal:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ISAKMP/IKE:action = "allow"
ipfilter:ipAddressGroupsWithRules:array_id:any:rules:_arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:action = "allow"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:protocol = "gre"
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP\: GRE - Generic Routing Encapsulation protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:readOnly = yes
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:protocol = "esp"
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ESP - Encapsulating Security Payload protocol:dest-port = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:oldDescription = "Layer-Two Tunneling Protocol (L2TP)"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN L2TP - Layer-Two Tunneling Protocol:dest-port = "1701"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:oldDescription = "PPTP VPN"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:protocol = "tcp"
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:readOnly = no
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:name = ""
ipfilter:standardServices:arrayid:VPN PPTP - Point-to-Point Tunneling Protocol:dest-port = "1723"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: ISAKMP/IKE:dest-port = "500"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:readOnly = no
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:protocol = "udp"
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:name = ""
ipfilter:standardServices:arrayid:VPN L2TP\: IKE NAT Traversal:dest-port = "4500"
Which seems to be correct to me.
As with the iChat problem, everything seems to be correct as reported by Server Admin. I have been hunting for the incorrect setting using serveradmin, but so far everything there seems to be correct as well.
One last item that I just discovered today, and which is probably a huge hint (and I just don't know how to connect the dots), is that when I stop the VPN service (it's running on the gateway server), the entire office loses it's connection to the internet. Turn VPN back on, and the internet is back.
I think my server is deeply, deeply disturbed, but I am not ready to wipe it clean and start over again. I sure would appreciate any insights on this one....

Problem after install Security Update 2011-003

hi
after after install Security Update 2011-003
i can't open App like mail, safari and more.
any idea
Benny

Process:         Safari [400]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ??? (???)
Build Info:      WebBrowser-75332101~1
Code Type:       X86 (Native)
Parent Process: launchd [212]
Date/Time:       2011-06-01 02:54:16.134 +0300
OS Version:      Mac OS X 10.6.7 (10J869)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
Reason: no suitable image found. Did find:
          /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore. framework/Versions/A/WebCore: truncated fat file. file length=12320768, but needed slice goes to 35270944
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <39AC3185-E633-68AA-7CD6-1230E7F1CEF4> /usr/lib/dyld
q

Secure Empty Trash Problem After Installing Security Update 2010-005

Some items in trash were locked, selected option to remove all items and nothing was deleted. Rebooted twice, no change. Unsecure empty trash works fine. Any ideas?

Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001

Problem with Entourage after installing Security Update 2008-005

Since installing the update I can no longer access the mail on my server using its required SSL settings in Entourage 2008. I can use Mail without problem, and I can access mail from my other servers (which don't require secure settings).
Any advice?
Thanks,
Madeline

Hello, i have the same problem. After security update the Mailprogram is polling my imap accounts (which requires SSL) endless. My workarround was to install Thunderbird. TB did the job. Any solution?
thh001

After security update 2011-005, iMac fails to shutdown

Similar Messages

Maybe you are looking for