After setup name server from SLD name prefix is still unavailable from nwds

Hi there
Although the nameserver is setup from the SLd, our developper team has told me that it does not work.
One of them has showed me from nwds, and I do not know how to fix it.
The name list is still unavailable from nwds while New Development Component creation:
Does anyone have any idea ?
Thanks,

Hi,
yes, there you should see the nameserver.
Proceed this way: Go to CMS webui -- Landscape Configurator -- Track Data -- select the track in question from the left hand side table -- RE-SAVE the track (Change and Save).
This action will update the server side development configuration.
Once the track is resaved, doublecheck the changes in the devconfig XML you can access on the Track Data -- tab Build Variants -- Display Development Configuration. An XML file will be opened where you should have an entry for nameserver. It'll look like
name-server-url="http://<your host:your port>/sld/cimom"
If it is correct, then open your NWDS and remove and re-import the development configuration.
Or try to trigger "Update" on it as you can see in the blog I sent you, but if that does not work then remove and reimport.
Check again the settings you have showed me recently on the screenshot, this time the "Name Server" on the Component Properties should not be empty any more.
I hope this helps. Let me know the results.
Thank you and Regards,
Ervin

Similar Messages

What are the different ways in accessing the SQL server from NWDS ?

Hi Experts,
Can anyone suggest the different ways for accessing the SQL server from NWDS.I also want to know whether any tool is available for accessing SQL server from Webdynpro java application in Netweaver development studio.
I am currently using JDBC driver for accessing the SQL server from Webdynpro java application in NWDS.
Regards,
Krishna Balaji T

Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN

Problem After Upgrading LC server from 8.0.1 to 8.2

Hello All,
After much hurdles, i was successfully able to upgrade my LiveCycle server from 8.0.1 to 8.2. Everything in adminui is working fine. In workbench (both in 8.0 and 8.2) also i'm able to open the processes and can edit.
Now my problem is i'm not able to open the resources from 8.2 workbench. But from 8.0.1 workbench i can open the resources as usual. May i know why this is happening. I dont know why it is trying to open the files from local machine instead of opening it from the server repository when i try to open it from the 8.2 workbench.
I'm getting the following error.
What is the reason?
Thanks
Deepak

Hello Paul,
Which file you are talking about. If you are talking about the .PDF file on the resources; For that matter none of the pdfs are opening. All the pdfs are opening in workbench 8.0.1 but not in workbench 8.2.1. Some how the files are trying to point to the local drive when we try to open in workbench and gives the warning that i have posted. We even deleted the .metadata folder then deleted the connection, then recreated it. Then also the problem still persists.
Please let me know why this is happening
Thanks
Deepak

MSExchangeSA and IS is not starting automatic at reboot after upgrading the server from SP1 to SP2

I am running a 2 node DAG with separate Hub & CAS servers
I have already upgraded the Hub CAS server and they are fine
Exchange running on Windows 2008 R2 SP1
All are in VM-Ware ESXi 5.0
After I upgrade the mailbox server to SP2 the SA and IS service not starting automatic after reboot
If I run "net time /set" command and then restart ADtopology server, the IS and SA starts fine
But again after reboot they do not start
Also I get the below event in the app log when the IS & SA fails to start
Log Name: Application
Source: MSExchangeIS
Date: 05/22/2012 5:15:03 AM
Event ID: 5003
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: server.domain.com
Description:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either on the client or on the server, and may require a restart of that computer. Verify that your domain is correctly
configured and is currently online.
If I check the Registry for time resource it is taking from the DC
I manually compared the time between DC and Exchange and it is fine
Since the Exchange mailbox is virtual, I checked the time sync on VM-Ware tools and it is "unchecked"
Checked for group policy and do not find any specific to time sync.
Confirmed that Windows Time service is running
Suspecting a Operating system issue, tried to upgrade the other DAG
Even that node is displaying the same symptom and Issues
Tried to install RU1 on both nodes and that too did not fix the issue.
Checked with VM-Ware engineer and he said that every thing from VM-Ware end is fine
Is Anyone have come across the issue before ?

Exchange 2010: Unable to initialize the Information Store
Problem:
Unable to initialize the Information Store service because the clocks on the client and server are skewed. This may be caused by a time change either in the client or the server, and may require a reboot of that computer. Verify that
your domain is properly configured and is currently online.
Solution:
Open a cmd prompt from the Exchange Server as administrator (right mouse click on the command prompt shortcut and select “Run as Administrator”)
Run this command
Net time \\ADServerName /Set
Restart the Microsoft Exchange Active Directory Topology Service
*Important!! You have to restart the Microsoft Exchange Active Directory Topology Service or this fix will not work.. I tried just starting the Information Store service after running the command it it still failed..
This worked for me and all is well on my exchange server.
- See more at: http://www.mountainvistatech.com/2012/06/04/exchange-2010-unable-to-initialize-the-information-store/#sthash.SwQpgQEM.dpuf

I can't read my files from "pages" app on iPad after taping on "copy from iTunes". I see the name of the file but when I tap on it nothing happens.

I can't open my files (pdf) from "pages" app on ipad after taping on "copy from itunes". I see the name of the file but when I tap on it nothing happens.

The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader.

Random characters after computer name

Hello,
We have a new issue with our agent deployment since we use MDT to deploy our workstations.
When computer register to ZCM some random characters appear after computer name, for example:
Computer name: corporate001
ZCM computer name: corporate001-741132927c2e6f41b5569a9f9409b983
Do you have an explaination?
ZCM Agent is automatically installed after deployment through a .vbs script.
cscript ZCMscript.vbs
Code:
Set objShell = CreateObject("Shell.Application")
objShell.ShellExecute "PreAgentPkg_AgentCompleteDotNet.exe", "-q " & "-x"
strComputer = "." ' local computer
strProcess = "Setup.exe"
Do Until isProcessRunning(strComputer,strProcess)
WScript.Sleep(5000)
Loop
Do While isProcessRunning(strComputer,strProcess)
WScript.Sleep(5000)
Loop
WScript.Quit 0
' Function to check if a process is running
FUNCTION isProcessRunning(BYVAL strComputer,BYVAL strProcessName)
DIM objWMIService, strWMIQuery
strWMIQuery = "Select * from Win32_Process where name like '" & strProcessName & "'"
SET objWMIService = GETOBJECT("winmgmts:" _
& "{impersonationLevel=impersonate}!\\" _
& strComputer & "\root\cimv2")
IF objWMIService.ExecQuery(strWMIQuery).Count > 0 THEN
isProcessRunning = TRUE
ELSE
isProcessRunning = FALSE
END IF
END FUNCTION

Yes, the random number is the "Device GUID".
In your Example there would already be a device called "corporate001" in your zone.
The GUID is added since there cannot be two devices with the same name.
There are reconciliation rules that determine "matches".
Most likely, your rules rely upon MAC and/or SN and this changed instead of relying upon Workstation Name.
No one way is "Correct".
It really comes down to what works for you.
Most likely a tweak of the rules to rely more upon "Workstation Name" may work best for you since I suspect your devices are in a domain if using MDT, which means the names are unique.

TNS Listener Service won't start after upgrading server from NT to 2000

I am new to Oracle and have worked my way through downloading and installing Oracle Enterprise Edition on an NT 4.0 SP6a server and I believe the installation was successful--I was able to run the Oracle Enterprise Manager successfully and I browsed the Oracle services in NT and they all appeared to be working.
I upgraded NT to Windows 2000 Server and Service Pack 2 yesterday and after that I am unable to run Oracle Enterprise Manager and have noticed that the TNS Listener will not start. Actually it starts and immediately stops. It does not cause any messages in the Event Viewer.
Any help on how to proceed would be very gratefully received.
I am a database administrator with a school district and are evaluating/comparing Oracle vs. SQL Server 2000 for creating a data warehouse.
Thanks!

Srinivasa and Allen,
Thank you very much for your replies. I tried the lsnrctl show connect_timeout command and got a message that connect_timeout was an invalid parameter. Is that true of 9i? However, I used the help show command and tried some of the other parameters and the error messages said something about not being able to locate the host. At that point I recalled that at the same time I was upgrading the server to Windows 2000 I also changed the name of the server from MISNT to just MIS.
At that point I renamed the server back to MISNT and after rebooting, the TNS listener works fine. I do want to change the server name back to MIS. It appears there is a configuration file somewhere that has the host name in it that I will need to change. It makes me wonder if there are any other places where I am going to need to change this before I'm done. Will I be better off to just completely uninstall Oracle, change the server name and then reinstall?
Thanks!
Rick

Name prefix reservation invalid

Hi All,
I've created a name prefix reservation on my sld to be used in nem DC created by NWDS with success. After that I decided to change the nomenclarure so I've deleted the name prefix and created it again. Since the recreation any name prefix is created but the checkbox valid is't checked making it unusable in NWDS.
With some further tests I've detected that this only happens when I create a name prefix reservation with purpose "used in generator".
Any ideis what the cause is ?
I'm using Netweaver CE 7.1 EHP1 (SP3).
Thanks in advance.
Edited by: Luis Pereira on Feb 10, 2011 11:18 AM

Hi Luis,
could you please rephrase your question for better understanding ?
Thank you!
Regards,
Ervin

Photoshop CS6 can't save to server after upgrading to Mac OS Yosemite Server from Mac Lion Server

We recently upgraded our server from a Mac Pro 2008 with OS X Lion Server to a Mac Mini 2014 with LaCie 20TB 5Big Thunderbolt 2 RAID drive. Everything is working fine with the exception of Photoshop. It does it intermittently but once it happens it will continue to do so. We get message like "Can't save to disk because of disk error" and "Can't save file because of program error" . Sometime we are able to do a "save as" and save over it. Most of the time we have to "save as" with a different file name and then rename and recopy the file. We have check permission on all the file as well as the server HD has ignore ownership checked. Again only three things changed. 1) Sever hardware change from Mac Pro to Mac Mini. 2) Server software upgraded from 10.7 Lion to 10.10 Yosemite(both have the latest update). 3) Drive when from internal on Mac Pro to External Thunderbolt 2 LaCie drive. We have no problem with Illustrator or Indesign. Only Photoshop. Anyone with any suggestion is greatly appreciated.

Unfortunately you seem to be using Photoshop in a way that Adobe discourages, so you may not be getting a lot of helpful advice.
Networks, removable media | Photoshop | CS4 and later

Cm.jar is working even after deleting the jar from Server

Hi,
To update the environment with the new changes we had manually copied the cm.jar into the respective folders but due to some class errors Deployment was not successful,So as a matter of trial we had deleted cm.jar from the respective folders and then we had ran the initialsetup,
Strange thing what we have observed is that all the custom logic which was initially deployed through cm.jar was still exisiting in the applicationserver and are getting executed smoothly
This is the process what we have followed
Method 1:
1)     Stop server
2)
Copy cm.jar to SPLBASE/etc/conf/root/WEB-INF/lib
Copy cm.jar to SPLBASE/etc/conf/XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
3)     Run InitialSetup
4)     Start Server
Method 2:
1)     Stop server
2)     Set Exploded directories to true
3)     Initial Setup
4)
Copy cm.jar to SPLBASE/splapp/applications/root/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/applications /XAI-APP/WEB-INF/lib
Copy cm.jar to SPLBASE/ splapp/businessapp
Copy cm.jar to SPLBASE/ splapp/ standalone/lib
5)     Run InitialSetup
6)     Start Server
Method 3:
1)     Cm packaging.
Even after removing cm.jar from all places manually my custom code which I deployed initially is working. I could run custom batch and custom algorithm. Very Strange. I am not sure what I missed or where application is referring to.
We want the old code to be removed permanently from server?Can you anyone help?
Thanks
shiva

Hi Mr Shankar,
Even if you have deleted the cm.jar file from respective location.It do exist in splapp.war file.If you will extract that file you will find the cm.jar file in /splapp/web-inf/lib/cm.jar location.So whenever you will run the initialsetup it will restore the cm.jar.This thing is happening in your case also.So delete the file from splapp.war and rebuild the war.This will solve your issue.
Hope it will work for you.
Regards
sunil sahu

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine

When i compose a new message and am typing in the name of the person to send it to it says iMessage after their name but when i click it says "Bonjour (offline) " my bonjour account isn't even enabled!? and it all used to work fine please help!

Hi,
I invoked New Mesage
I typed a Name in Manually (rather than using the blue + icon)
I clicked on the "to" name and got this
Uploaded with Skitch!
I don't get a Bonjour Option here.
I do get a Jabber ID showing up for them but for soem reason it does not list my "From" account.
I would say that I have seen multiple "To"s and the same for the "From" choices and I think I have seen the Bonjour one listed.
However the "To" And "From"s don't seem to match and it appears you can iMessage Jabber names/ID or Jabber AIM names (which you can't in either case)
10:06 PM Thursday; March 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

After update client and server to Lion Unable to (re)connect to OD server from updated client (Lion)

Hi all,
I'm a bit in the dark here.
All day searching and reading.. but nothing much yet.
After updating the server and a client to OSX Lion, I'm unable to connect to the open directory of the updated server.
The previous config worked very nice for months.
Now it's a bit iritating, cause imho it seems nothing is in place and its a bit hard to find a solution or how to setup / correct the OD Lion server .
Of course i have downloaded the manuals, that state it's all so easy, and I have seen all the movies on the tubers and they also state its so easy.
Well, since I am feeling a big noob now and before my "self value" degrades 2 below 0 I'm asking 4 your help guys...
Can you give me the candle to find the way in the dark?
There are more things that don't work, but save that for later.. ;(
Situation is as follows:
Started to upgrade the Server 1st.
Then tested from the "old client" and all is working reasonably
Then upgraded to the new Lion client also,
and you guessed it right, no way in.
It's a pretty strait up config...
Hope someone can push me in the richt direction..
(hope it's not the push service from apple, arf arf, cause that's one of the other things that is not working yet)

Steps I took upto now:
What I did is go to the client and start the Directory Util, and then select the search config.
Add manually the info of the server.
Then If I type in the IP address, i got the green bulp. But it seems not to work.
When I enter the fqdn, I get the error 2100 could not connect to the ODserver (send by the com.apple.systempreferences)
Because it's an upgrade I deleted then the total contents of the previous settings that where initiated by the "old" setup send by the OD server prev. upgrade.
Then I deleted the kerberos files on the client, and all other things related. connecting to the OD server.
Then I deleted the Machine account on the OD server and back to the client.
Then I created the machine account again from the client manually by going in the OD util on the client.
(connected manually by adding the ip address and then clicking the lock on top of the menu and then after auth succeeded I could see all the rec's and other stuff ..which is a great new feature that you used to do by the
WGM. Now available by the ODutil. Nice.
Okay, after all these steps, I get the feeling it should be able to work, but still the 2100 error.
Somehow it "seems" that the DNS is not responding, but when I get in the terminal, it responds nicely to the pings.!!! And almost everything (not because of faulty DNS) is working.!
So now what?
Any help be appreciated.
(srry 4 typo's /Language. it's a bit late in Europe and not my main Language)

Error message after chaning names of forms

We changed the names on 5 or 6 data forms yesterday (from Planning, edited the form and changed the name on the Properties tab). After the name changes, we now get the following error message when accessing "Manage Data Forms" from Workspace only. If we log directly into Planning, we can go to "Manage Data Forms" and not receive the error message.
Error message: "There was a communication error while loading tree data"
Anyone have any idea what might be the issue here?
I have searched the forum and the KB on my Oracle Support, but couldn't come up with anything.

I can give that a shot tonight just to see if it does help, and then restore back to the current version so nothing is lost. If we were to replace the repository for the planning application, what sorts of things would we lose? We had created new version members and copied versions through planning since we started getting this error.
We have another application that does open in Planning through Workspace without that error message, so it would make sense that its something to do with that application's repository.

Number after computer name

I am using Apple Remote Desktop on a Mac Pro to administer a Macbook Air.
When the Air joins the network or wakes up from sleep, ARD sees it as a new machine with the same name, so it adds a serial number in parentheses to the name (e.g. MyMbAir becomes MyMbAir(1), then later MyMbAir(2), etc.).
What is causing this behavior and how can I solve it?
These may be related:
https://discussions.apple.com/message/11560605#11560605
https://discussions.apple.com/thread/2396328?threadID=2396328&tstart=0
Cheers,
MB

This is really annoying, as it not only "appears" in *my* copy of ARD as an admin, but it *LITERALLY* changes the machine name in the remote computer, such that I have to connect, go to ITS Sharing area in System Preferences and manally delete the stupid (#) entry after its name.
As more and more of my administered users move to laptops, this started, so the idea of going to/from wireless seems the best explanation, although so does the sleep idea in other threads.
I really wish ARD had better support (and an iOS version too!), b/c this is still relevant over a year later...
Thanks to you both for at least explaining why this keeps happening (and why I might as well forget about playing whack-a-mole with (#) entries on every managed system)!

SQL Server 2012 stops running after setup files are copied.

SQL Server 2012 setup stops running after setup files are copied.
I've experiencing the same issue on two different machines. Both are 64 bit running Server 2008.
On both of them I tried installing using the files from the ISO. I initially used winzip to extract the files. The setup was running fine, but the SQL Server engine had an error when it installed. Then using the Add/Remove programs i uninstalled all of the
SQL Server 2012 applications, including the setup files.
Now when i try to install using the "New SQL Server stand-alone..." wizard it will copy the setup files and then the wizard never comes back. I've tried mounting the ISO, extracting with winrar, Burning the ISO to a dvd and downloading the 3 files. I also
tried mounting ISO of the version that was just recently released. I run into the same issue with all of them.
Thanks for the help.

can you try
setup.exe
/Action=install /x86 /UpdateEnabled=false
If this doesn't work please use below FAQ to locate and upload SQL Server setup logss.
FAQ
Regards,
Ahmed Ibrahim
SQL Server Setup Team
My Blog
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and "Vote as Helpful"
on posts that help you.
This can be beneficial to other community members reading the thread.
Thank you, it's work!!! :) Maybe problem was in /UpdateEnabled=false and I could try to install a x64 version... but too late, setup in progress and I do not want to have to try all over again :)

After setup name server from SLD name prefix is still unavailable from nwds

Similar Messages

Maybe you are looking for