After signing up for banking on ING Direct, Firefox suddenly stopped allowing the pages to come up. even when I click "allow."

secure.ingdirect.com : server does not support RFC 5746, see CVE-2009-3555
This is the message I got after successfully setting up an account on ING Direct. I now cannot get to the account

No problem here, try https://www.ingdirect.com/home
Firefox > Preferences > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
* https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
The setting in "Firefox > Preferences > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
* http://kb.mozillazine.org/accessibility.blockautorefresh
* http://kb.mozillazine.org/Accessibility_features_of_Firefox
You can try to clear the "Active Logins" via Clear Recent History
*https://support.mozilla.com/kb/Clear+Recent+History

Similar Messages

HT1212 After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub. I have tried everything I can think of to get it working again but to no avail. My desktop computer still works through the same hub

After working perfectly for two years my iTouch has suddenly stopped connecting to my Hub although my desktop computer still connects. I have tried everything I can think of, including suggestions off Google/You Tube but nothing makes any difference. Any ideas. Surely it is not fit for the scrap heap after two years, but is clearly no use as it is.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When I click PRINT for a PDF file, a window pops up asking me to "save the file as" an xxps doc.. The page dows not print even if I click save. I do not want this "save" window will not printh

How can I eliminate this seemingly automatic "save" window. Just want to print the pdf.
THANK YOU!

Deleted it, restarted it. tried it again. no change. repeated the whole cycle. no change. thinking about uninstalling and reinstalling, but that won't reallyk change the settings.

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

After,using,CS,for,one,year,I,must,have,an,activation,code,,the,trial,version,will,be,end, over,25,days.,How,is,it,possible?,What,can,I,do?

After,using,CS,for,one,year,I,must,have,an,activation,code,,the,trial,version,will,be,end, over,25,days.,How,is,it,possible?,What,can,I,do?

Was the iPad originally set up on a different computer, and hasn't been synced to the one that you are now trying to use ? There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141
(Before trying that you could copy any important files/documents off the iPad so that you have you own backup copy of them e.g. depending upon what the apps support then email them to yourself, use Dropbox, copy them to your computer via your wifi-network.)
You should be able to copy iTunes purchases off the iPad and over to that computer's iTunes via File > Devices Transfer Purchases, but if you have music from other sources (e.g. copied from CDs) which aren't in that computer's iTunes (and you haven't got a backup to copy them onto it from) then there are some programs listed half-way down this page which should be able to copy them back : https://discussions.apple.com/docs/DOC-3991
For recovery mode, that will result in your iPad being put back to factory defaults i.e. all of your content will be removed from it

HT4623 My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the char

My iPhone has suddenly stopped working. It now says the battery is dying and to charge it. After charging it for over an hour, there is no change. The power won't come on, and I am left with a blank screen advising me to plug my phone into the charger.

Try different USB Cable, try different Charger. Clean iPhone charging port with clean dry toothbrush. If still problem and you have Warranty or AppleCare, make Genius reservation and take iPhone to Apple for resolution. If no coverage, most likely it could be battery or charging port assembly that need replacement.

If I sign up for a monthly thing of photoshop, can I cancel the subscription at any time?

If I sign up for a monthly thing of photoshop, can I cancel the subscription at any time?

If you go to the single app subscription, by month and paid by the month ($29.99/MO), you can. If you get the photography package ($9.99), no. You are buying a one year subscription. You can cancel it, but I think you will have to pay an early termination fee.
Benjamin

I have lost my iPad and would like to block it from being reregistered. It is a wifi only and does not have a sim card. I did not sign up for any tracking software either. Can apple block the serial number?

I have lost my iPad and would like to block it from being reregistered. It is a wifi only and does not have a sim card. I did not sign up for any tracking software either. Can apple block the serial number?

No.
Apple can do nothing.
You cannot block it from being "registered".
If you did not set up find my ipad before it was lost, then there is nothing you can do but change your passwords.

I am unable to sign in to my wi fi network on my ipod because the keyboard wont come up. what do i do?

i am unable to sign in to my wi fi network on my ipod because the keyboard wont come up. what do i do? please help me out

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??

I paid for and downloaded a song, but it won't play saying the file could not be found. It says this even when I click on the song IN the itunes store, so I can't even listen to the sample now??
I haven't kept records of the songs I have paid for, and a number of songs have recently been displaying this message, making me search my computer for them. Most I have been able to find, but this one immediately "disappeared" the moment I attempted to play it after downloading...... how do I either get it back or get my money back???

How did you do this move? Unless you know what you are doing you have to move the whole, complete iTunes folder.
iTunes: How to move [or copy] your music to a new computer [or another drive] - http://support.apple.com/kb/HT4527
Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
Windows users see tip at: https://discussions.apple.com/message/18879381

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW

I'm trying to find the plugin for camera raw, but all I can find is the page with the cameras that are supported. But I don't find how to find and install the actual plugin. The end name is ARW, and all I need is to find WHERE I can download it. Thanks.

cr is installed by updating your app. use help>update, or update manually
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2104 updates: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

Firefox does not refresh the page after posting on IPS forums

I visit the forums at www.sailinganarchy.com. After replying to a post firefox does not refresh the page to show that the post is posted. But I open IE and I can see that the post is posted properly.
I am using FF 3.6.8 and this issue has only started in the last few days.
I am
== URL of affected sites ==
http://

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can also check the Web Console (Firefox/Tools > Web Developer) to see if there are specific error messages.
*https://developer.mozilla.org/Tools/Web_Console

HT1725 When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.

The add-ons tool window hangs when I click Options for any add-on

This morning, IE8 showed up as the default browser. Also, the Lastpass button was missing. When I click Tools-Add-ons and click the Options button for any add-on, the window hangs. Sometimes it hangs FF as well.

I resolved this by using a different add-on.
I was issued a new computer at work. It's a Windows 7 Dell E6410, and I was configuring a new installation of Firefox for it. I had downloaded the same URL shortening tool that I used on my old Windows XP IBM T60 computer. That add-on had the hang when you click on "Options" from the Tools > Add-ons menu. After uninstalling the add-on, I searched for a different URL shortening tool, and this one did NOT produce the hang.

After signing up for banking on ING Direct, Firefox suddenly stopped allowing the pages to come up. even when I click "allow."

Similar Messages

Maybe you are looking for