After "sleep" keyboard not responding, mouse is working ok (mouse is wireless, k/board is not)
after "sleep" keyboard not responding, mouse is working ok (mouse is wireless, k/board is not)
Probably a defective keyboard. I had that problem a few months after I got my Mac Pro. Apple replaced the keyboard and it has worked fine ever since.
Similar Messages
-
my iPod touch does not respond, I'm trying to restore from itunes but it does not work
What exactly happens when yu ty to restore?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Keynote Crashing - with Lion. Most often when I switch out of Keynote to another program - Keynote freezes - says Application Not Responding. If I save the Keynote before switching, it does not crash - only when it says it is an "edited" file....help
I posted this on another thread. See if this works:
1) Uncheck "Backup previous version" in Keynote's Preferences.
2) Make a duplicate copy of your file that has issues and save it.
3) If you still get spinning wheels from switching between apps after editing or 10 seconds of inactivity, manually save with command+s. It may beach ball here but be patient and wait for it to finish! Try editing and resume doing work now.
Command+s may be a bit slow but I think that might be normal since the files are so big.
Good luck and let me know if this works. -
My trackpad is not responding properly on MacBook Pro. Can move the cursor but not click on icons or similar items.
Intel-based Apple Portables: Troubleshooting unresponsive trackpad issues
-
most of the time (not all) when i am using Firefox, the little yellow light on my computer tower stays on (does not flash).
at the same time i get a message on the color bar at the top of the screen that says "such and such website" (Not Responding).
i have tried clearing the cache.most of the time (not all) when i am using Firefox, the little yellow light on my computer tower stays on (does not flash).
at the same time i get a message on the color bar at the top of the screen that says "such and such website" (Not Responding).
i have tried clearing the cache. -
On shut down I always get the message Program Not Responding. This happened before I installed Firefox. It does not pose a problem, that I know of, but it does concern me because I always have to End Program manually when I get this message.
== Over a year ago.Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (MAC)
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
SeaMonkey -
Premiere Pro CS5 Not Responding (Freezing) When Working With Other Programs
Hello,
I have a performance issue with Premiere Pro 5.0.3 version. When I have the program open and bounce to another program or Windows Explorer window lets say to drag in an asset such as a music or video file and then when I make the Premiere window active the program does not respond for a good 15 seconds, then after some processing (you see the mouse icon change and hear the hard drive chugging), I am able to again work. This is happening every time I switch windows to work on something else. Even if I just click away to another window and click right back without doing anything else, it does this non responding action. It even says it in the title bar (Not responding). I am wasting so much time waiting for the program to respond.
My system :
Windows 7 Ultimate
Intel Core i7 CPU 860 @ 2.80 GHz
8.00 GB of RAM
Quadra 5800 Nvidia graphics card
Drobo Pro 24 TB drive (where my project files, music & video files live) connected via iSCUSI
Sonnet 4 TB raid drive (scratch disc) connect via ESATA
Dual Monitors
Please help!
~ DougDoug,
Similar had plagued earlier releases of CS5, but I thought that it had been addressed with the CS5.0.3 update. Maybe I am wrong.
There were several other threads here, with similar problems. Maybe they contain some tips that will help. The "constant" seemed to be shifting focus from PrPro, and then back to PrPro.
Good luck,
Hunt -
My wireless key board does not work but wireless mouse does?
I can not get my wireless keyboard to work again after i changed the batteries, It work sonewhat before I chaged the batteries but don't work at all now. I tried removing the thing pluged into the usb port and i pushed the connect button on the bittom of keyboard but nothing works. The wireless mouse works fine. What could be wrong?
Not sure which KB you have, but I'd check a few things.
1) You might have a dead battery or two - perhaps try batteries known to be working in another device, such as a TV remote control.
2) The KB shouldn't need to be re-synced just via a battery change. However, if you do resync - you might need to hold the sync button longer. On my TouchSmart IQ804, I usually push mine about 10 seconds or so. I can pull the USB tranceiver out of the back of the unit and put it in the side/front port, that way I can watch the LED that indicates sync/transfer better.
I know that there are some good wireless KB troubleshooting documents on the HP website - here is a link to one of them.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00006821&lc=en&cc=uk&dlc=en
-DM (a long-time HP employee)
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier. -
I have noticed my Firefox browser is having way too many incidences where it is "Not Responding". The browser freezes up for a second quite often and the "Not Responding" message will appear at the top of the screen.
The browser will also not scroll with either the scroll bar on the right nor with the mouse wheel. Both used to work in previous versions of Firefox, but it seems to have gotten worse since Firefox 5 0r 6. The same with the "Not Responding". It is happening more with Firefox 7 than in at least the past two versions.
Anybody else having these issues? Seems like they are hand-in-hand. Thanks for any and all help or advice. It's making me pretty angry since I'm online all day for work.
Just an FYI. At the bottom of my troubleshooting copy/paste is a suggestion to update the driver for my graphics. That was a no-go. I tried that.Thank you for this first reply! I'll have to give this a try later....the main laptop I experience this on crashed not more than an hour after I posted this issue. I'm on a tiny, slow netbook that hasn't had the same problem. Now I'm wondering if I picked up a Trojan on the main laptop and the "Not Responding" message is a side effect of a virus or Trojan.
One of the system .dll files has been corrupted and I'm not being allowed to use recovery discs, previous disc images, or any recovery options. That was an all day sucker yesterday and from what I've read on forums and have researched, it appears I'm going to need to reload the operating system. If it is indeed a Trojan/virus, I'm surprised it made it through my antivirus and firewall. Anything is possible, really.
Thanks again, I'll get back with results once I get the wounded laptop back up and running. -
System Preferences is stuck in Not Respondin, I have force quit and Restarted but it remains as not responding. Help
A google search suggests deleting this file.
username/Library/Caches/com.apple.preferencepanes.cache
See this link.
http://reviews.cnet.com/8301-13727_7-10412529-263.html -
Help! Keyboard stops responding and then works after reboot
My computer will start running really slowly and then the keyboard stops working, then after 30 seconds or so I lose the ability to click but the mouse still moves. Command-option-esc for force quit still works some of the time though but refreshing everything from there doesn't help. After I reboot everything goes back to normal. This has happened every other day or so for about a week. Help me please!
See if you get this behavior using another account.
See what happens when you safe boot. -
Aftger I upgraded to Yosemite I cannot see my iMac at home from my work (i.e in Finder window under shared devices). Note both my work and home iMac are connected to time capsules and I can see both of those time capsules but I cannot see either iMac from the other location. My guess is that the time capsule is blocking the connection to the iMac. One last comment occasionally (5% of the time) my iMac does magically appear in the shared Finder window but this is extremely rare. Any help????
Just discovered this one myself. OK, this may sound silly but place your cursor next to the word "Shared" on the finder sidebar. The "hidden" command "Show" will magically appear. Clicking that will display your other network attached devices.
This appears to be a new "feature" that some freaking genius thought was some how "Cool". My only assumption is that Apple programers expect users to randomly move their cursor around the screen in hopes of finding some critical function like looking for an easter egg in their favorite game. -
After the distribution of the latest windows update on Dec 2014 we started to face irregular behavior with our Citrix ICA Client V12 which is used to connect to our online applications. The web application suddenly crash and windows provides an error message
as below. The event viewer shows the below log.
We suspect that it was duo to Windows update, we have tried this fix (https://support.microsoft.com/kb/3025390) but with no luck.
Any help is appreciated.
Faulting application name: WFICA32.EXE, version: 9.200.44376.0, time stamp: 0x4457db21
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea91c
Exception code: 0xc0000005
Fault offset: 0x00056b0d
Faulting process id: 0x10d4
Faulting application start time: 0x01d019e9afafc4b1
Faulting application path: C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: f6c843ce-85dc-11e4-b1c7-d4bed9e4153fWe have tried to also to run (System File Checker) SFC /Scannow to check if there are any issue with the system files as outlined in the event log. But there was no problem returned with the checker.
I have extracted the below Windows Error Reporting WER file when the ICA client crash. Can we analyze the data as we might find the cause,
Version=1
EventType=APPCRASH
EventTime=130636298224429936
ReportType=2
Consent=1
UploadTime=130636298279335952
ReportIdentifier=a415d253-88f8-11e4-84ec-f04da2276df6
IntegratorReportIdentifier=a415d252-88f8-11e4-84ec-f04da2276df6
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=WFICA32.EXE
Sig[1].Name=Application Version
Sig[1].Value=9.200.44376.0
Sig[2].Name=Application Timestamp
Sig[2].Value=4457db21
Sig[3].Name=Fault Module Name
Sig[3].Value=ntdll.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7601.18247
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=521ea91c
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00052d37
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7601.2.1.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
UI[3]=Citrix ICA Client Engine (Win32) has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE
LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\Windows\system32\kernel32.dll
LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\USER32.dll
LoadedModule[5]=C:\Windows\system32\GDI32.dll
LoadedModule[6]=C:\Windows\system32\LPK.dll
LoadedModule[7]=C:\Windows\system32\USP10.dll
LoadedModule[8]=C:\Windows\system32\msvcrt.dll
LoadedModule[9]=C:\Windows\system32\SHELL32.dll
LoadedModule[10]=C:\Windows\system32\SHLWAPI.dll
LoadedModule[11]=C:\Windows\system32\ADVAPI32.dll
LoadedModule[12]=C:\Windows\SYSTEM32\sechost.dll
LoadedModule[13]=C:\Windows\system32\RPCRT4.dll
LoadedModule[14]=C:\Windows\system32\ole32.dll
LoadedModule[15]=C:\Windows\system32\VERSION.dll
LoadedModule[16]=C:\PROGRA~1\Citrix\ICACLI~1\ICALOGON.dll
LoadedModule[17]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7601.18201_none_ec80f00e8593ece5\COMCTL32.dll
LoadedModule[18]=C:\PROGRA~1\Citrix\ICACLI~1\PScript.dll
LoadedModule[19]=C:\Windows\system32\OLEAUT32.dll
LoadedModule[20]=C:\PROGRA~1\Citrix\ICACLI~1\SSLSDK_B.dll
LoadedModule[21]=C:\PROGRA~1\Citrix\ICACLI~1\ACRDLG.dll
LoadedModule[22]=C:\PROGRA~1\Citrix\ICACLI~1\STATUIN.dll
LoadedModule[23]=C:\PROGRA~1\Citrix\ICACLI~1\TcpPServ.dll
LoadedModule[24]=C:\PROGRA~1\Citrix\ICACLI~1\CgpCore.dll
LoadedModule[25]=C:\PROGRA~1\Citrix\ICACLI~1\CGPCFG.dll
LoadedModule[26]=C:\Windows\system32\NETAPI32.dll
LoadedModule[27]=C:\Windows\system32\netutils.dll
LoadedModule[28]=C:\Windows\system32\srvcli.dll
LoadedModule[29]=C:\Windows\system32\wkscli.dll
LoadedModule[30]=C:\Windows\system32\WINMM.dll
LoadedModule[31]=C:\Windows\system32\apphelp.dll
LoadedModule[32]=C:\Windows\AppPatch\AcXtrnal.DLL
LoadedModule[33]=C:\Windows\system32\IMM32.DLL
LoadedModule[34]=C:\Windows\system32\MSCTF.dll
LoadedModule[35]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\STATUIUI.DLL
LoadedModule[36]=C:\Windows\system32\uxtheme.dll
LoadedModule[37]=C:\Windows\system32\CRYPTBASE.dll
LoadedModule[38]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2\comctl32.dll
LoadedModule[39]=C:\Windows\system32\CLBCatQ.DLL
LoadedModule[40]=C:\Windows\system32\propsys.dll
LoadedModule[41]=C:\Windows\system32\ntmarta.dll
LoadedModule[42]=C:\Windows\system32\WLDAP32.dll
LoadedModule[43]=C:\Windows\system32\SETUPAPI.dll
LoadedModule[44]=C:\Windows\system32\CFGMGR32.dll
LoadedModule[45]=C:\Windows\system32\DEVOBJ.dll
LoadedModule[46]=C:\Windows\system32\WINSTA.dll
LoadedModule[47]=C:\Windows\system32\WTSAPI32.dll
LoadedModule[48]=C:\Windows\system32\wininet.dll
LoadedModule[49]=C:\Windows\system32\api-ms-win-downlevel-user32-l1-1-0.dll
LoadedModule[50]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l1-1-0.dll
LoadedModule[51]=C:\Windows\system32\api-ms-win-downlevel-version-l1-1-0.dll
LoadedModule[52]=C:\Windows\system32\api-ms-win-downlevel-normaliz-l1-1-0.dll
LoadedModule[53]=C:\Windows\system32\normaliz.DLL
LoadedModule[54]=C:\Windows\system32\iertutil.dll
LoadedModule[55]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l1-1-0.dll
LoadedModule[56]=C:\Windows\system32\USERENV.dll
LoadedModule[57]=C:\Windows\system32\profapi.dll
LoadedModule[58]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\WFICA3UI.DLL
LoadedModule[59]=C:\Windows\system32\dwmapi.dll
LoadedModule[60]=C:\PROGRA~1\Citrix\ICACLI~1\PDCOMPN.DLL
LoadedModule[61]=C:\Windows\system32\netbios.dll
LoadedModule[62]=C:\PROGRA~1\Citrix\ICACLI~1\VDTW30N.DLL
LoadedModule[63]=C:\PROGRA~1\Citrix\ICACLI~1\VDCDM30N.DLL
LoadedModule[64]=C:\Windows\system32\MPR.dll
LoadedModule[65]=C:\PROGRA~1\Citrix\ICACLI~1\VDSPL30N.DLL
LoadedModule[66]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[67]=C:\PROGRA~1\Citrix\ICACLI~1\reducv3.dll
LoadedModule[68]=C:\PROGRA~1\Citrix\ICACLI~1\pcl4rast.dll
LoadedModule[69]=C:\PROGRA~1\Citrix\ICACLI~1\emfrendr.dll
LoadedModule[70]=C:\PROGRA~1\Citrix\ICACLI~1\VDCPM30N.DLL
LoadedModule[71]=C:\PROGRA~1\Citrix\ICACLI~1\VDCOM30N.DLL
LoadedModule[72]=C:\PROGRA~1\Citrix\ICACLI~1\VDCAMN.DLL
LoadedModule[73]=C:\PROGRA~1\Citrix\ICACLI~1\AUDCVTN.DLL
LoadedModule[74]=C:\PROGRA~1\Citrix\ICACLI~1\ADPCM.DLL
LoadedModule[75]=C:\PROGRA~1\Citrix\ICACLI~1\VDCMN.DLL
LoadedModule[76]=C:\PROGRA~1\Citrix\ICACLI~1\resource\en\VDCMNUI.DLL
LoadedModule[77]=C:\PROGRA~1\Citrix\ICACLI~1\VDTWIN.DLL
LoadedModule[78]=C:\PROGRA~1\Citrix\ICACLI~1\VDFON30N.DLL
LoadedModule[79]=C:\PROGRA~1\Citrix\ICACLI~1\VDMMN.DLL
LoadedModule[80]=C:\PROGRA~1\Citrix\ICACLI~1\VDCTLN.DLL
LoadedModule[81]=C:\PROGRA~1\Citrix\ICACLI~1\VDSPMIKE.DLL
LoadedModule[82]=C:\PROGRA~1\Citrix\ICACLI~1\VDTWN.DLL
LoadedModule[83]=C:\Windows\system32\WS2_32.DLL
LoadedModule[84]=C:\Windows\system32\NSI.dll
LoadedModule[85]=C:\Windows\system32\mswsock.dll
LoadedModule[86]=C:\Windows\System32\wshtcpip.dll
LoadedModule[87]=C:\Windows\system32\Secur32.dll
LoadedModule[88]=C:\Windows\system32\SSPICLI.DLL
LoadedModule[89]=C:\Windows\system32\api-ms-win-downlevel-advapi32-l2-1-0.dll
LoadedModule[90]=C:\Windows\system32\api-ms-win-downlevel-ole32-l1-1-0.dll
LoadedModule[91]=C:\Windows\system32\api-ms-win-downlevel-shlwapi-l2-1-0.dll
LoadedModule[92]=C:\Windows\System32\wship6.dll
LoadedModule[93]=C:\Windows\system32\IPHLPAPI.DLL
LoadedModule[94]=C:\Windows\system32\WINNSI.DLL
LoadedModule[95]=C:\Windows\system32\MMDevAPI.DLL
LoadedModule[96]=C:\Windows\system32\wdmaud.drv
LoadedModule[97]=C:\Windows\system32\ksuser.dll
LoadedModule[98]=C:\Windows\system32\AVRT.dll
LoadedModule[99]=C:\Windows\system32\spool\DRIVERS\W32X86\3\unidrvui.dll
LoadedModule[100]=C:\Windows\system32\spool\DRIVERS\W32X86\3\mxdwdrv.dll
LoadedModule[101]=C:\Windows\system32\spool\DRIVERS\W32X86\3\hpmdp083.dll
LoadedModule[102]=C:\Windows\system32\spool\DRIVERS\W32X86\3\hpcui083.dll
LoadedModule[103]=C:\Windows\system32\COMPSTUI.dll
LoadedModule[104]=C:\Windows\system32\MSIMG32.dll
LoadedModule[105]=C:\Windows\system32\ATL.DLL
LoadedModule[106]=C:\Windows\system32\spool\DRIVERS\W32X86\3\unidrv.dll
LoadedModule[107]=C:\Windows\System32\msxml3.dll
LoadedModule[108]=C:\Windows\system32\spool\DRIVERS\W32X86\3\KMUU51KQ.DLL
LoadedModule[109]=C:\Windows\system32\COMDLG32.dll
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=Citrix ICA Client Engine (Win32)
AppPath=C:\PROGRA~1\Citrix\ICACLI~1\WFICA32.EXE -
no responses to any hyperlinks or buttons in this area. any button or hyperlinks that scroll into this area go dead as well, and when you scroll down they work fine. reduced the window but still does it.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
No further details beyond my question above, but when I composed this message, all words were undertlined red! Numbers like 100 or times like 10:30 are not underlined!
Do you have a dictionary installed and selected?
* You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.
* Open the "Add Dictionaries" link to install a dictionary if you do not have one.
* Make sure that [X] "Check Spelling" in the right-click context menu is check-marked.
You can enable or disable spell checking globally:
* Firefox > Preferences > Advanced : General: Browsing: "Check my spelling as I type"
You can look here for dictionaries:
* https://addons.mozilla.org/firefox/language-tools/
See also:
* http://kb.mozillazine.org/Spell_checking
* http://kb.mozillazine.org/Dictionaries
* https://support.mozilla.org/kb/Using+the+spell+checker
Maybe you are looking for
-
My iPhone 4S can no longer hold a charge, had battery replaced once before and is only 2 years old
I've had my iPhone 4S for two years and I still have one more year in my contract. The first month I had my phone I had similar battery issues where the phone was able to hold a charge over 3 hours. I never have wifi or Bluetooth on, I do not even ha
-
Hi, I am using Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 . I am working in a procedure where I want to manipulate the data produced by a WITH AS clause. But it is giving "PL/SQL: ORA-00942: table or view does not exist" error. A smal
-
Unable to use Adobe Digital Editions on IMac
I am getting two error messages - one indicating that one or more downloads are not finished and whether I press ok or cancel, I get a message indicating an error getting licence due to server communications problem
-
Help CS5 content aware healing brush
Sorry for the dumb question folks. I just upgraded and when I click on my healing brush, I do not have a Content Aware option. What am I doing wrong. The porgram defaults to asking me to option click to determine what to use. I am running CS5 on and
-
Generating an XML file in local machine
Hi, I have a requirement in Oracle apps forms: When i click a button in Oracle forms from front end, the xml file needs to be generated and saved in my local desktop in some path. e.g C:/siva/temp.xml I mean when we click a button in R12 applications