After Snow Leopard install, apps are freezing multiple times

I had this happen with--
Encore
Toast
Illustrator
on multiple occasions. Never had this problem before. Had to restart programs, if not machine, several times.

Hello j:
I am not arguing with you. I simply want to point out that it is not Apple's responsibility (nor any other software developer) to make third part programs work on new software releases. Apple does work with third party developers and makes changes available well in advance of a public release. I had a couple of third party programs that did not work until the developers released an updated version.
I'm having all kinds of programs suddenly close and/or freeze over and over.
If these are Apple programs, post back and someone may be able to assist.
Barry

Similar Messages

  • HP Photosmart C6300 printer/scanner not working after Snow Leopard install

    HP Photosmart C6300 printer/scanner not working after Snow Leopard install
    Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

    Keith,
    I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

  • Text messages in Safari are garbled on Mac Pro after Snow Leopard install

    When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

    I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
    https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
    Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
    Message was edited by: Attila Szegedi

  • Mac Pro seems to be missing 0.5 GB of ram after Snow Leopard install

    I just installed Snow Leopard on my Mac Pro (2 x 2.8 GHz Quad-Core Intel Xeon). The computer has only ever had the default 2 GB of RAM that comes with it from Apple. I know I need more, it's on order. The odd thing that I noticed after installing Snow Leopard is that the computer now only reports 1.5 GB or RAM in the "About This Mac" box. Specifically it says: "1.5 GB 800 MHz DDR2 FB-DIMM". Odd.
    Second if I click "More Info..." below is what I see in the memory slots.
    Does anyone know what might have caused this, or if its possible to get that 0.5 GB back?
    Second I just ordered 8 GB of RAM (MACMEM 4Gx2|KST KTA-MP800K2/8G R). If the above issue doesn't get resolved what do you suggest I do when the new RAM arrives? Should I just add in the new stuff for a total of 9.5 GB, or should I also take out the existing RAM that's reporting odd values? I'm wondering if the missing 0.5 GB is a symptom of other issues, and maybe that RAM is "sick" and could slow things down somehow.
    Thanks for any ideas.
    Jesse
    Memory Slots:
    ECC: Enabled
    DIMM Riser B/DIMM 1:
    Size: 1 GB
    Type: DDR2 FB-DIMM
    Speed: 800 MHz
    Status: OK
    Manufacturer: 0x802C
    Part Number: 0x3138484631323837324A4438304544364434
    Serial Number: 0xD834438C
    DIMM Riser B/DIMM 2:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM Riser A/DIMM 1:
    Size: 512 MB
    Type: DDR2 FB-DIMM
    Speed: 800 MHz
    Status: OK
    Manufacturer: 0x802C
    Part Number: 0x3138484631323837324A4438304544364434
    Serial Number: 0xD8344473
    DIMM Riser A/DIMM 2:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM Riser B/DIMM 3:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM Riser B/DIMM 4:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM Riser A/DIMM 3:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty
    DIMM Riser A/DIMM 4:
    Size: Empty
    Type: Empty
    Speed: Empty
    Status: Empty
    Manufacturer: Empty
    Part Number: Empty
    Serial Number: Empty

    I am running a '07 Mac Pro that has had 7GB RAM since I bought it almost 3 years ago - the original 2x512MB + 6x1GB purchased from Crucial.com. Suddenly, after installing Snow Leopard, only 6GB are being recognized; two of the 1GB DIMM's now read as 512MB in System Profiler, and the Part Number and Serial Number listed for those modules are incorrect.
    After searching these forums for ideas, I have tried:
    • Resetting the PRAM -- no change
    • Running Apple Hardware Test -- no problems found
    • Running TechTool Deluxe 3.1.3 (updated for Snow Leopard) -- no problems found
    • Running TechTool Pro 5.1.6 (updated for Snow Leopard) -- no problems found
    • Running system scanner (beta) from Crucial.com - cannot read installed RAM
    The only thing I haven't tried is physically reinstalling the modules, but since the computer hasn't moved in months that seems pretty doubtful. If I make any progress I'll post again, otherwise, I'll be contacting Crucial for replacements.

  • Can't get some websites to work after snow leopard install, java maybe?

    I'm a day trader. I use TD Ameritrade every day to work on. I believe the real time streamer and level 2 quotes are all java based.
    This past weekend I did the Snow Leopard install on my computer. Until this morning it seemed like all was well.
    I go to ameritrade and try to log in and it keeps saying it doesn't recognize my log in. I called them and they are able to log into my account so its my computer. I went to the java preferences and there use to be a lot of java types there now there are just 2, could that some how be it?
    Any suggestions?
    Susan

    Safari is a 64 bit application, is it worth starting the app in 32 bit mode and testing if it is any better.
    use finder and highlight Safari in the applications directory, do a get Info (cmd i) and tick the 32 bit mode box and restart Safari.
    If it does not help remember to revert back to 64 bit mode.

  • TS3479 quick time not working after snow leopard install?

    Made video's on my iphone and loaded them to my imac. Video did not work in iphoto.  No Quick time pop up. what happened? Snow leopard install. 

    You need to re-install iPhoto because it's missing bits of itself:
    Library not loaded...
    Reason: no suitable image found.
    Looking at the missing files it's possible that it's missing from the OS. But start with re-installing iPhoto, and if that fails you'll ned to re-install the OS.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
    Regards
    TD

  • IPhone 3GS doesn't sync after snow leopard install

    Since installing snow leopard, iTunes does not sync with my iPhone when I connect it to the computer. iPhoto automatically opens to sync, but iTunes is dormant, and does not list my phone under the devices menu.....help!!

    This same thing happened to me today.  Snow leopard install and now itunes cannot find any of our iphones. It might be nice IF APPLE ADDRESSED THIS ISSUE HERE ON THE THREAD. We also have a brand new iphone and can't even get it synced, which really really *****.
    It bothers me that apple is not responding immediately to this issue.

  • How to re-install apps after Snow Leopard install

    I went from OS 10.4.11 to Snow leopard 10.6 OS, I have not Updated versions yet.
    I used SupperDupper to back all of my hard drive of 10.4.11, prior to install of 10.6 OS.
    I sort of thought that my applications and all of my settings would still be in place, that Snow Leopard would carry them over to it's new OS.
    What a disappointment. No personal computer stuff from my old OS is present.
    No System setup information is present, no Air port settings, No e-mail settings, no network settings, what a pain in the ........ well you know.
    I got a basic OS right now and nothing else.
    I do have the whole hard drive back up on an external though. how can I have MAC take the settings and third party applications and place them on the new OS without making problems for the new OS. Don't want to replace new MAC app files, with old ones.
    if I use drag and drop then I have to spend a day and a half rebuilding network connections and then registering everything again.
    How do I protect the integrity of 10.6 but still get my applications working without re-loading and without re-regeistering everything again application, by application.
    Thanks for you replies
    Randy

    Alright, Superduper app on the backup drive allows me to launch SD, however, when I select the copy from drive (my backup) to copy to the copy to drive, the laptop HD, I find that the Laptop HD is grayed out.
    I dragged and dropped SD to the Laptop and then launched and received the same result, the Laptop HD is still grayed out.
    My SD says at the bottom of the window, Unregistered, but it was registered on my laptop before the OS install.
    So i am I right that I have to get my network working, then register SuperDuper again, then see if I can select the Laptop HD as the destination drive for moving the apps over to?

  • Mac will not boot after Snow Leopard install

    I recently had a HD crash.  Replaced the HD and installed Snow Leopard from a image file on an external HD.  Install went great.  I copied over data files and things seems just fine.  My first reboot after the install and the Mini won't boot.  I am stuck with the Apple Logo and a spinning wheel.  I ran disk utility and the new HD checks out fine.  When I boot with the external HD, it still sees my Mini HD.  I tried restarting with Command/Option/P/R but that didn't do anything.  Any advice?

    I'm in a slightly similar spot- no crashes, but-- What I want to hopefully do is run my Tiger ppc apps (3) for CAD on my New- 5 weeks old) Lion Factory Installed machine. The ( November) First Aid Issue of Mac Life mentions a way
    way to get external boots, UNLESS they are the Factory installed ( Lions). In the meantime----
    Johnny

  • MacBook Pro Won't Sleep after Snow Leopard Install

    Neither closing the computer, or selecting Sleep from the menu will allow my computer to enter slumber. Shorty after closing its eyes, my computer will make that unsettling grinding noise and wake up.
    I've reset the PRAM, the PMU, turned off bluetooth, airport, all running applications. This only started happening after installing 10.6.
    I found a thread on MacRumors discussing this problem, but there was no fix yet. So I bring it here. Can anybody guess what's up, or should I just take it in to the Apple store?

    Don't bother taking it to the Apple Store. They won't be able to help. This is a bug in Snow Leopard. I don't know of any workaround or any way to make it stop. It doesn't happen all the time. Usually shutting down the machine will fix it. Sometimes, it will fix itself after a while.
    It is important that you never assume a machine is going to go to sleep successfully. Always wait for the pulsating light. If it does go to sleep, chances are it will stay that way. I used iLid Preference Pane to make sure that my machine doesn't accidentally wake up while it is in a bag or something.
    I've already filed a couple of bug reports about it. You can help you sending your feedback to Apple.

  • Time Machine "resets" after Snow Leopard install.

    This may be answered in other threads, if so I'd appreciate a pointer to them. I couldn't find an appropriate one in my searches.
    I have a MBA and recently installed Snow plus the 10.6.1 update. I was having various issues and reinstalled Snow, leaving me at 10.6.0.
    I had deleted some applications to free up some space, and decided to restore them with Time Machine (TM). The first time I opened TM, it seemed normal and I restored one of the applications.
    Then my external drive where TM backs up to began to backup. Later I tried to open up TM and my desktop froze. After several reboots still had the same issue, I did a Safe Boot. Then rebooted as normal.
    Now TM asks if I want to start backing up, net new. It doesn't appear to see the old backups anymore.

    Try the Snow Leopard forums. You are now in the Leopard forums. Wrong place for a SL question.
    TM questions should be posed in the Time Machine topic area of the Leopard forums. At the top of the TM forum are three User Contributed Tips that you should read to see if you are able to find a solution for your problem.

  • Cannot login after snow leopard install

    Hi
    I have installed snow leopard onto my macbook pro, it worked ok after install and then after shutting down and restarting the next day I can no longer login. It says that there is a problem with filevault - "your home folder which is protected by filevault didn't open. it needs to be repaired. To repair folder continue log in." So I clicked ok and it says that "you are unable to login at this time because an error occurred"
    Please can someone help!!! How do I log in and repair filevault?

    To eject the disc - http://docs.info.apple.com/article.html?artnum=50991
    Once you eject the disc, gently clean it before reinserting it. Some dvd drives are very fussy about the media.

  • Iphone not detected after snow leopard install

    I just upgraded to snow leopard (and did a clean install so I deleted everything) but now iTunes isn't detecting my iPhone. When it's plugged in it charges but it doesn't show up in the iTunes sidebar. I already did the "authorize computer" thing and it didn't work
    Please help!!

    I basically have the same issue... i have an iPhone 3G and a Macbook:
    - was running Leopard - ran software update
    - installed Snow Leopard
    - tried to plug in my iPhone to my Mac
    - iTunes started up and got the neverending pinwheel
    Noticed the following:
    - iPhoto sees my iPhone fine.
    - Remote app for my iPhone interfaces with iTunes fine.
    Only have the "not responding" message with pinwheel after connecting my iPhone to my Mac with the USB cable. Not sure what's going on... hope the devs get a solution running soon!

  • TM backup disk cannot be found after Snow Leopard install

    Message from elsewhere re-posted here after helpful advice from Apple Discussions Team.
    Just installed Snow Leopard (with TM switched off though not unplugged) and got all the software updates available. I re-installed the TM installation disk. Everything went ok until I wanted to restore from my Time Capsule. I switched the big switch on. TM is continuing to make backups but when I want to locate folders to restore TM won't go back further than the day I installed Snow Leopard. Having selected the TM disk and entered the password the dialogue tells me that the TM backup disk cannot be found and offers me the select disk dialogue again. I have gone through the unplug/plug routine.
    Through Migration Assistant I tried the contents of my Pictures folder (including all my iPhoto libraries) but it just supplied an empty folder. Since I didn't migrate at the time of the Snow install I wonder whether it was migrating the earliest backup it had made after the Snow install. This would make sense if "the Time Machine backup disk cannot be found", as the dialogue keeps telling me.
    Anyone any ideas?

    I'm not sure just what you did.
    Did you reinstall Snow Leopard? Did you do a full restore?
    First, just re-select your Time Capsule in TM Preferences.
    If that doesn't help, try a "Full Reset" of TM per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    If that doesn't help, see #E2 there.
    If still no help, use the Finder to see if you have two sparse bundles on your Time Capsule. If so, try mounting one manually by double-clicking it, then using the Browse option per #E2.

  • Can't Print After Snow Leopard Install?

    My network includes iMac(2.93 GHz Intel Core 2 Duo), a Compaq laptop and Ativa router (AWGR54 Wireless G v01)(Belkin),Brother MFC6490CW (all-in-one wireless). All working fine together.
    Added a brand new Macbook running Snow Leopard which connects to internet/email just fine, but WOULD NOT PRINT to Brother MFC6490CW printer. When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW. So now both iMac and Macbook won't print unless wired.
    Any ideas?

    When I upgraded iMac from Leopard to Snow Leopard 10.6 it also stopped printing wirelessly to Brother MFC6490CW.
    I thought I had this same issue with my Epson printer when wireless printing. Actually, in SL, wireless printing is very slow at least with an Epson. Takes about 5 minutes or so for wireless print to even start. When checking the printing status app, it will start out saying "printer ready." Then after a few minutes it will say "looking for printer." A few minutes later it will say "printing."
    When I go into the next room where the printer is, the green light is "flashing" letting me know that "printing" has started.
    So I guess what I am trying to say is to check the printing status app after you click "print." It's possible "Brother" is just as slow as "Epson."
    Message was edited by: CMCSK

Maybe you are looking for