After software update, Epson Artisan printers will not print 4x6

Hi all,
After updating the Epson drivers to the latest Apple-Provided version (Via software update), neither my Artisan 837 or Artisan 835 will print to Epson Premium Glossy 4 x 6 photo ppaper. Both worked prior to the update.
I have everything set correctly in the software (nothing changed after the update) but both printers act as if they have a hardware issue now. They cannot grab the 4x6 paper and after trying for a while, they give me a generic error saying there is either a paper jam or there is no paper in the tray.
This is really weird. I can hear the printers clicking away and trying to feed a sheet to print, but neither can grab the 4 x 6 and print.
They both work just fine with 8.5 x 11.
Any thoughts?

Snow Leopard is not a download. Did you install it from disk? What OS did you have before?
You may want to check on Epson's web site to see if they have an updated driver.
Best of luck.

Similar Messages

  • HT4356 Epson Artisan 837 will not print from IPhone

    I have an IPhone 5 and an Epson Artisan 837 printer. When I attempt to print from my Ihone 5 I always receive an error message:
    "out of paper, paper jammed, or incorrect paper size".
    In reality,it is none of these things. I can print from my IPhone 5 to my Brother printer via the router connected to my computer, but the Epson is via WiFi/AirPrint.
    Someone tried printing from their IPhone 5 to my Epson and it worked perfectly, but it WILL NOT PRINT FROM MY IPHONE 5.

    Try GutenPrint:
    Click here to begin autodownload: http://tinyurl.com/8ctlaw.
    You might also benefit from installing Usbtb & the latest Ghostscript & CUPS:
    Click here to begin autodownload: http://tinyurl.com/9mgm38.
    Here's a link to GNU Ghostscript 8.63: http://tinyurl.com/9g9tx9.
    Here's a link to CUPS 1.3.9: http://tinyurl.com/yuckcm.
    Here's a link to Foomatic-RIP:
    Click here to begin autodownload: http://tinyurl.com/4ep5dv.
    Finally here's a link to HPIJS:
    Click here to begin autodownload: http://tinyurl.com/ayhp9z.
    You should find that your HP printers print much faster now since Usbtb is faster than Apple's built-in USB drivers that they ship with Leopard by default.
    <Edited by Moderator>

  • Just installed snow leopard/ now my Epson artisan 725 will not print

    I downloaded snow leopard( so i could transer my i tunes to mynew ipod(7) onto my macbook.( older original macbook 5+yrs)
    what do i have to do to make my Epson artisan 725 wireless printer communicate with my laptop again.( my mac os is 10.6.8   )  i do not see the 725 on the list of compatible printers .  

    Snow Leopard is not a download. Did you install it from disk? What OS did you have before?
    You may want to check on Epson's web site to see if they have an updated driver.
    Best of luck.

  • Why will my epson artisan 810 will not print with ipad?

    Why will my epson artisan 810 not print with iPad?

    Because it is not a Airprint enabled printer.
    http://support.apple.com/kb/ht4356

  • My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • TS4006 After hitting update , find my iPad will not update on my iPad 1

    After hitting update , find my iPad will not update on my iPad 1
    Suggestions?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures.

    HP Photosmart c4450 prints and scans normal 8.5x11 fine, but will not print 4x6 laminate pictures. Using the printer completely unconnected from a pc or network, using a SSD memory card to print off. As the printer begins the print, the printer prints only about 3/4 of the image, and clips the rest leaving it blank. Within the options, you can see the whole picture on the LCD screen, and selecting the 4x6 print mode it still clips the picture. 
    Not sure exactly whats going on, the printer was doing this fine for about a year, and just randomly started to print with the image cut off at the beging and ending abruptly at the end only printing half-3/4's. Also using the same memory card, have not tried a different card though. Any ideas?

    As far as I know,  you cannot scan or perform software-based copying over a Bluetooth connection. Printing is doable. Perhaps that is something that is in the pipe for developement. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Epson Stylus CX7300 will not print after software update

    After doing the latest update for my Epson Stylus CX7300 printer it will not print.  When i open the printer utility it comes up with a communication error.  I can still scan documents but i can't print or even print a test page, check ink levels etc.

    Hi Kerry Bonney,
    Welcome to the Apple Support Communities!
    If you are having issues printing after running a software update I would recommend using the troubleshooting steps in the following article. It sounds like you have already completed some of these steps, but I would recommend reading over and working through the steps provided in this article.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Have a great day,
    Joe

  • My epson WF-3540  will not print.

    After updating to  Yosemite. My Epson will not print.,even  with the  the epson  2.19 driver update. 
    None of My devices can find my printer. It  only works with USB plug directly to my iMac.  .( iMac (24-inch Mid 2007,Processor-2.8 GHz Intel Core 2 Duo)
    I've reinstalled software.
    Unplugged  and reconnected  cables.
    Print out from printer says everything  passes ,network  is good, but epson connect is disabled ?
    What can I do next?
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Name: I
      Processor Speed: 2.8
      Number of Processors: 1
      Total Number of Cores: 2
      L2 Cache: 4 MB
      Memory: 2 GB
      Bus Speed: 800 MHz
      Boot ROM Version: IM7
      SMC Version (syste
    Model Name: iMac
      Model Identifier: iMac7,1
      Processor Na

    Network Printer Troubleshooting
    If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Printer Troubleshooting - Yosemite
    If you haven't done so already, try resetting the printing system.
    OS X Mavericks: Reset the printing system  also Yosemite

  • TS3147 My HP printers will not print in color.

    My MacBook will not print in color either with my old HP 6122 or my HPEnvy 120.  Any solutions?

    Hey Sarah24,
    Thank you for the information. From this it sounds as though the issue is with the preference files for the printer are taking over. There are some long steps that need to be taken.
    To start off, you will need to reset the printing system of the Mac. Now if you have more than one printer, you can skip this step. If you only have the one printer, I have included the document 'OS X Mavericks: Reset the printing system' http://bit.ly/1bS2qrh.
    After this you will need to uninstall the software. Again if you have more than one HP printer installed, please just go with the normal uninstall. If you only have the one HP printer, to do a full uninstall of the software, please follow the steps below.
    1. Open the HP folder in the Application folder
    2. Open up the HP uninstaller
    3. On the page that has you click the uninstall button. Hold Control, Option, and Command, then click uninstall. NOTE: if you have more than one HP printer just click uninstall, without holding down the three keys.
    4. Follow through the rest of the uninstall
    The next step needs to be done either way. This step is the verify and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions' http://bit.ly/1bjFnnP. After the repair of the permissions has been completed, please restart the Mac.
    Once the restart has completed, you will need to reinstall the software. I have included the link to 'HP ENVY 120 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks' http://bit.ly/1emTqaj. Please make sure that you either choose recommended install, or all the extra features, such as scanning.
    Now once you have the software successfully installed, please click on the Apple Icon, and then on Software Update. Please install all updates that are available to you.
    Please let me know the outcome of the troubleshooting.
    Thank you.

  • Software Update for Brother printers disabled my printer

    This morning I installed a Software Update for Brother printers and now I can't print.  Every time I try, I was gettting an error message that says some of my software is missing and it asked if I wanted to install it.  A window opened looked like it was looking in Software Update and it didn't find any software.  I deleted the printer in Printers and Faxes and downloaded the CUPS driver from Brother that says it's compatible with OS 10.7.  Now I can't add the printer.  When I go through the steps to add the printer, for Print Using I select HL-2140 series, which is the model of my printer.  I click on Add and the Add Printer window starts looking for the printer software, but I think it's looking in Software Update.  The message comes up "the software for this printer is currently unavailabe.  Please contact the printer's manufacturer for the latest software.  I did that, but how can I get it to use the driver I downloaded from Brother instead of looking for it in Software Update?

    This helped with both my Brother printer and my HP AIO.  I was having marginal printer function after installing OS X Lion, then replace the Airport Express with an Airport Extreme.  That knocked out everything....After several days of loading and reloading programs in different permutations, this relatively simple step was the charm.
    THANKS!!

  • Epson xp-312 will not print wireless with 10.9

    i am new to the mac so i got a epson xp-312 from our local shop and installed the driver what is the lastest from epson but it will not work wireless and will not find the printer. I have gone to network settings and you can trace it and it will come back saying that the ip address belongs to the epson but when you ping it it comes back 100% fail you can print from a windows pc wireless with no problem please help the driver i have tried is 2.15.1 dated 11th sept 2013 thank you in advance for any help

    alamondo wrote:
    i have a ipad and a iphone and they both can not find the printer ...
    I am assuming (hoping!) you mean you have installed the Epson iPrint app on one or both of your iPad and/or iPhone, and Epson iPrint does not detect the printer.
    If that's true, then Mavericks is definitely not the problem!  Neither the iPhone nor iPad (nor Epson iPrint) rely on Mavericks.
    Hunt for your printer using Epson iPrint.  Make sure your pinter is on, tap "Scan", then tap the gear-like icon in iPrint to hunt for it.

  • New Epson WF-7620 will not print; is offline after installing setup software

    This is a problem that took me many hours to solve; but I did solve it.  I thought I would offer it up so no one has to go thru the pain I did.
    The problem is that during the Epson set-up procedure for Wireless printing, the mac cannot find the printer (or verify the printer exists) even though the printer has an IP address assigned to it.  The reason for this is the printer (mine at least) comes configured with Bonjour turned off . . . and you'll need to turn this in for any mac to add the printer in a conventional way.
    The way to turn Bonjour on is as follows:
    1.  Pull up a browser and type in the IP address assigned to the printer.  On my home wifi network it will be something like XXX.168.1.3 where XXX is some 3 digit number.  Once you pass thru the security queries the browser puts up, proceed to that site.  You'll see a web page with detail on the printer.  Go to Wifi/Network Settings->Services->Protocol.  Find the Bonjour Settings and click on Use Bonjour.  Exit this page and you'll see your printer when you add a Printer from Settings->Printers & Scanners--> the Plus sign (to add).

    Try Linc's suggestion first.  That should cure your issue.  If not, here's something else to consider:
    PrinterMaccer wrote:
    I installed the software from the site ...
    Apple keeps a set of current software for Epson printers.  You should start by going to System Preferences > Printers & Scanners and delete the printer from the list (using the "-" key).  Then download Apple's software version from here:
    Epson Printer Drivers v2.18 for OS X
    Finally, set up the printer as shown here:
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network

  • Software update notification (red circle) will not disappear even after download

    Hi all, just a quick question. I updated my software last night after seeing the red, circular "1" update notification over the settings menu. Everything downloaded normally on both my ipad and iphone, but for some reason, the notification circle will not disappear on the iphone. I have synced it with my laptop, turned it off and on, and even reset all the phone's settings but that pesky red circle remains. I have tried just about everything I can think of outside of restoring it to factory settings and starting over. Honestly, I feel it should not come to this. To have to completely wipe my phone and start over because of something as simple as a software update is madness. I know this is a trivial thing to be so annoyed by but I use my phone often and anything out of the ordinary gets irritating quickly. Any advice or info would be much appreciated. Thanks guys!

    The quickest way to try to fix it is to download the Mac OS X 10.6.7 Update Combo and manually install the update. It should fill in any missing gaps. I suggest dragging & dropping the Mac App Store into the Trash before the installation to let the update install a fresh version of the MAS.
    http://support.apple.com/kb/DL1361
    Dah•veed

Maybe you are looking for