After software updates - error message- system extensions are not valid

Every time now after installing SL, when apple update installs new software, an error message comes up - system extensions not valid, reinstall or ask the system administrator. it then goes through each extension that is wrong. it appears a lot of them are from oct 2007. What do I do about this?

here are the extensions: most of them that sya are installed incorrectly
AppleK2SATARoot.kext
AppleMPIC.kext
ATIRadeon8500GA.plugin
ATIRadeon9700GA.plugin
ATIRadeonGA.plugin
ATIRadeonGLDriver.bundle
ATIRadeon8500GLDriver.bundle
ATIRadeon9700GLDriver.bundle
GeForce2MXGLDriver.bundle
GeForce3GLDriver.bundle
GeForceFXGLDriver.bundle
ATIRadeonDVDDriver.bundle
AppleAltiVecDVDDriver.bundle
ATIRadeon8500DVDDriver.bundle
ATIRadeon9700DVDDriver.bundle
ATIRadeon8500VADriver.bundle
ATIRadeon9700VADriver.bundle
ATIRadeon.kext
ATIRadeon8500.kext
ATIRadeon9700.kext
NVDANV10Hal.kext
NVDANV20Hal.kext
NVDANV30Hal.kext
AppleNDRV
ATINDRV.kext
ATIRNDRV.kext
AudioDeviceTreeUpdater.kext
AppleDallasDriver.kext
IOI2CFamily.kext
IOI2CControllerPMU.kext
IOI2CControllerSMU.kext
IOI2CControllerPPC.kext
zfs.readonly.kext
IOPCCardFamily.kext
IOPlatformFunction.kext
AppleMacRISC2PE.kext
IOI2CPulsar.kext
IOI2CCPUVoltage.kext
IOI2CHWClock.kext
IOI2CSlewClock.kext
AppleHWClock.kext
AppleMaxim6690.kext
AppleMaxim1989.kext
AppleLM7x.kext
AppleLM8x.kext
AppleSMUMonitor.kext
IOI2CMaxim1989.kext
IOI2CMaxim6690.kext
IOI2CAD741x.kext
IOI2CLM6x.kext
IOI2CLM7x.kext
IOI2CLM8x.kext
IOI2CSMUSat.kext
IOI2CMaxim1631.kext
AppleI2S.kext
AppleMacRiscPCI.kext
IOI2CDeviceLMU.kext
AppleLMUController.kext
AppleMacRISC4PE.kext
AppleMediaBay.kext
seatbelt.kext
AppleSym8xx.kext
AppleThermal.kext
AppleCore99NVRAM.kext
AppleVSP.kext
ApplePCCard16ATA.kext
KeyLargoATA.kext
IOADBFamily.kext
ApplePCCardATA.kext
AppleLED.kext
AppleK2SATA.kext
AppleKiwiRoot.kext
AppleKiwiATA.kext
AppleI2SModemFamily.kext
AppleFlashNVRAM.kext
AppleVIA.kext
AppleFPButton.kext
PMUMotionSensor.kext
IOI2CMotionSensor.kext
IOI2CDeviceFCU.kext
AppleFCU.kext
AppleI2C.kext
AppleKauaiATA.kext
AppleKeyLargo.kext
AppleK2.kext
AppleK2Driver.kext
IOKeyLargo.kext
AppleSPU.kext
ApplePMU.kext
CMD646Root.kext
AppleSMU.kext
MacIOGPIO.kext
I2CGPIO.kext
IOI2CDriveBayGPIO.kext
AppleGPIO.kext
AppleK2Fan.kext
IOI2CADT746x.kext
AppleFan.kext
VirtualAudioDriver.kext
AppleLM87.kext

Similar Messages

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing." I am in the US how do I switch?

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

TS1368 Error message tells me to reset password. After resetting password I get confirmation email that new password is set. As soon as I try to access App Store I get error message that password is not valid.

Error message tells me to reset password. After resetting password I get confirmation email that new password is set. As soon as I try to access App Store I get error message that password is not valid.

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

Control.invoke() throws System.ArgumentException with Error message as 'Parameter is not valid'

Hi All,
While doing cross thread communication, i am getting System.ArgumentException with Error message as 'Parameter is not valid' when call is made on the control.invoke(delegate method, parama object[]).
I have checked the parameters, all parameters look good.
Please share your views on this.

I am going to explain the following Exception schenario.
The RenderForm() is called from different thread and initially panel.InvokeRequired is true as it gets called from different thread and then invoke() gets called.
So again same method is getting called and InvokeRequired property has then changedd to false and then else part of the code is executed however if i call the RenderForm() repetadely then application throws the exception as stem.ArgumentException with Error
message as 'Parameter is not valid'
And the Exception stack trace is as below-
Type: System.ArgumentException
Message: Parameter is not valid.
Source: System.Windows.Forms
TargetSite: System.Object MarshaledInvoke(System.Windows.Forms.Control, System.Delegate, System.Object[], Boolean)
StackTrace: at System.Windows.Forms.Control.MarshaledInvoke(Control caller, Delegate method, Object[] args, Boolean synchronous)
StackTrace: at System.Windows.Forms.Control.Invoke(Delegate method, Object[] args)
StackTrace: at NCR.APTRA.RendererCore.RendererCore.RenderForm(TTUForm form, IDataRecord data, Boolean clear)
Adding the code snippet:
private void RenderForm(TTUForm form, IDatRec.IDataRecord data, bool clear)
if (panel.InvokeRequired)
panel.Invoke(new RenderFormInvoke(RenderForm), new object[] { form, data, clear });
else
//logic to draw the window content
Please help me on this.. Thanks..

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded." How can I repair?

Private Browsing function is suddenly not working. Error message :"The URL is not valid and cannot be loaded."
How can I fix it?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I am getting this error message, " The URL is not valid and cannot be loaded" when I try to go to Firefox home. I have uninstalled add-ons, uninstaleed and reinstalled a fresh new firefox which did not help

I am getting the following error message, " The URL is not valid and cannot be loaded" when I try to go to firefox home. I uninstalled add-ons , uninstalled Firefox and then installed a fresh version. Still have the problem.
Thanks for the help

That issue can be caused by a corrupted or incomplete Visual C++ installation (multiple versions can be installed side-by-side; SxS) that is missing some runtime components (Redistributable Packages) that Firefox depends on (problem with an embedded manifest file that specifies a specific runtime version).
You need to install the missing components (e.g. VisualC++ 2005 Redistrbutable).
* https://www.microsoft.com/download/en/details.aspx?id=5638
*[[/questions/908165]] The URL is not valid and cannot be loaded
*[https://bugzilla.mozilla.org/show_bug.cgi?id=713167 bug 713167] - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

After software update apple rv light flashing and not coming on

After software update my apple tv did not come on and light is flashing I tried in pluging and all what next for me

It was probably applying the update and rebooting, unless it had doin it for awhile?. You will need to grab a micro usb cable and restore in iTunes
http://support.apple.com/kb/HT4367

Ssrs 2008 r2 error-Forward pointing dependencies are not valid

In an existing SSRS 2008 r2, report, I am attempting to add a parameter called 'Customer_Category'. I am getting the following error message:
The report paramter 'CustomerNumber' has a DefaultValue or a ValidVaue that depends on the report parameter 'Customer_Category'. Forward pointing dependencies are not valid.
I am trying to determine how to fix this error. The 'CustomerNumber' is a parameter value that is obtained by reading from a dataset. In this dataset there are existing other parameters called 'Customer_Type' and 'Customer_Preference'. Both of these parameters
obtain there values from selections that the user makes when the SSRS report is executing. There are no default values.
I am trying to have the 'Customer_Category' be the same way where there are no default values and the user must select the parameter value when the report is executing. There should only be one value that the user can select from.
The new parameter called 'Customer_Category' is the last parameter in the list of parameters. Does the order of parameters make a difference? If so, how can I move the 'Customer_Category' parameter in front of the customer_number parameter?
Here is the sql that is used from obtaining a list of customers from the dataset for customer_number:
SELECT   Distinct CustomerNumber
FROM   BridgeUserCustomer
WHERE
         Type = @Customer_Type
AND Preference = @Customer_Preference and Category = @Customer_Category
GROUP BY CustomerNumber
Would you tell me what is wrong and what I can do to solve the problem?

Create independent datasets for each parameter and try once.
Regards, RSingh

Error Message - "Time Interval is not valid for dummy activities"

Friends,
I am trying to create a planned order on a resource at a plant. However it shows up an error message.
An application program called an LCA routine. The following error
occurred:
Time interval is not valid for dummy activities. Probable causes
error are an extremely long processing duration or times that li
outside the time interval (1.1.1970 + 30 sec, 1.1.2038 - 1 sec).
Could anyone help pme out with this,
Thanks in advance.
-A

Hi,
Please check the control key and activity type in routing.
Thanks,
DV

I get the error message:System extension cannot be used The system extension "/System/Library/Extensions/AppleUSBthernetHost.kext" was installed improperly and cannot be used. Please try reinstalling it, or contact the product's vendor for an update.

I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?

"I get the error message after updating itunes:
System extension cannot be used
The system extension “/System/Library/Extensions/AppleUSBthernetHost.kext” was installed improperly and cannot be used. Please try reinstalling it, or contact the product’s vendor for an update.
What or how do I fix this?"
I have a MacBook Pro running Mas OS X Version 10.7.5
Is this a problem I need to fix? Is there a fix or update?

Software Update error message

I'm running Panther 10.3.9 and when I did the Security Update this morning, after the restart I got an error message that said: System extension cannot be used. The system extension
"/System/Library/Extensions/dfe530txp.kext" was installed improperly and cannot be used. Please try reinstalling it or contact the product's vendor for an update.
That's happened almost every time I did the security update for months, but I didn't know what it meant or what to do about it so I've ignored it until now.
However, I have my new Tiger disks and I want to update from Panther to Tiger today and thought if this had to be addressed first I'd better ask about it. Perhaps updating to Tiger will take care of it?
Also should I run disk utility on my 10.3.9 first?
I will ask some questions about actually installing my Tiger in separate questions But should I be asking the update installation questions in the 10.3.9 section or the 10.4.6 section?
I'm no whiz kid and really don't want to goof things up.

Well Cornelius - how I wish I had listened to you. Upshot of a long afternoon, including 2-1/2 hrs on phone with applecare is that I cannot open my OS X. The last thing I did at their suggestion was an archive and install again - but they of course were closing and couldn't stay on the phone until it got thru. They gave me a case number and I'll be calling them again tomorrow because the 2nd install was like the first. It wouldn't open.
What happened is that everything appeared to be going well. The install checked the install disk. It checked my target disk. It did the easy install as I'd said. It got through, the little blue bar was full, it said it would restart in 30 seconds - or some such. I saw the restart button. It was pulsating. The screen went black, came back on with it's bong. But then there was no "ping" that I usually here. Got a gray screen - first with an apple in the center and the little cog wheel under it going round and round. Then the apple changed to a circle with a line thru it. It kept going and going and going - - nowhere - for 15 minutes I kept my fingers crossed.
I gave up and called them. Went from person to person to person (two segments of 15 minutes wait in between the first two). The third person had me:
Turn off the power to the computer. Turn it back on. Nothing different.
Unplug everything from the back of the computer. ethernet cords, usbs, firewire, monitor, hub - everything. Waited a minute and plugged it all back in.
Tried starting with holding down the apple option P R.
Tried starting holding down just the option.
Turned it off again and turned off the power for awhile. Started it again and my gosh - it started up in OS 9! I haven't been in there forever. I went under the apple to control panel to startup disk. The os 9, os X (which did at that point show version 10.4.6), ox X install disk. I selected my OS X and hit restart.
It restarted - and did the same thing.
At one point - don't remember what we did before that, the three icons were up together. Two arrows under them - one kind of in a circle, the other pointing straight to the right. The install icon and os 9 icon were light. The os X had a dark background. Tried to click on it. Nothing. Tried to click on the os x install disk - it turned dark and my x turned light.... until I clicked on it again at which time they reversed.
Shut down again and started up from the install disk holding down the C. He had me pull up the disk utility - was able to highlight my OS X and run repair disk. It came up needing no repair.
That's when he said to try the install again. Went through it all. Everything was the same - got to the restart countdown. It restarted with a bong and then again the gray circle with the line thru it and the cog wheel going round and round and round.
They did give me a case number so I can call back again tomorrow but I really don't know what could be left to do. Pretty scared here.
Also am going to need my new printer hooked up. Planned on hooking it up to my G4 because my macbook can print thru the wireless network. My G4 does not have wireless capabilities so I don't think I'll be able to print from it (assuming I get it running again) if I have the printer hooked up to my macbook - or my netgear router... not really sure where I'm supposed to hook it up if not to my G4.
I did transfer a couple of my applications from my external hd to this one - one of them being my Eudora (which I actually had already installed on this one I think) - just to try it - and you're right it didn't work. Just a little needle wiggling back and forth.
Guess tomorrow's another day.. but if you have any thoughts on anything to try they didn't bring up - would appreciate hearing them. Oh yeah - my install dvd is still in the drive of course. Can't get the door open with the button even when I turn the computer on. The eject key on the keyboard won't work either.
I did notice somewhere along the way that my available GB on my OS X is now down to somewhere under 5, while it was just under 10 GB to begin with. The dang new systen has to be on there just like the Version number said. But it won't open.
You told me something could happen. Wish I'd listened.
Should I be putting this on a new thread?

Startup Error Message: System Extension Cannot Be Used

Every time I turn on my computer, this error message appears. I have searched my Library > Extension folders and I cannot find the AppleUSBEthernetHost. I have also searched for the Apple USBEthernet Host, and cannot find this. As far as I know, nothing is working improperly, save for my Sims 3, but I doubt that has any connection. I am running on a MacBook OS X 10.6.8, Build 10K549. Attached is a screen-capture of my error message. Any help would be greatly appreciated.

Open the Script Editor in the /Applications/AppleScript/ folder, copy and paste the entire following line into it, and press the Run button:
do shell script "chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext" with administrator privileges
If it doesn’t work, throw that item away and then reinstall iTunes.
(113835)

IPod software update - error message??

Dear All,
When I try to download an install the latest software (1.2.1) update for my iPod, then this error message appears (translated from danish):
'There was a problem downloading iPod-software to iPod "xxxxxxxxxxxxxx". An unknown error occurred (-3234).
What to do?
- I have tried to disable firewall and other anti-xxx while trying, but the same happens.
Please help.
Regards and a merry XMas
MJKH
iPod 30GB Windows XP

Try here:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Help after software upload error message 14

My ipad was working perfecly until the new software upload for ipad. Itunes then told me i had to restore my ipad. i keep getting error message 14. there was nothing wrong with my ipad or my computer prior to the software upload. i have contacted apple help three times now. i've read ht 1925, ts 1363 and ts 1275. as a non computer person and apple support not being available on sundays i am not sure what to do now. totally frustrated. i've spent at least four hours on this. please help.

My ipad was working perfecly until the new software upload for ipad. Itunes then told me i had to restore my ipad. i keep getting error message 14. there was nothing wrong with my ipad or my computer prior to the software upload. i have contacted apple help three times now. i've read ht 1925, ts 1363 and ts 1275. as a non computer person and apple support not being available on sundays i am not sure what to do now. totally frustrated. i've spent at least four hours on this. please help.

After software updates - error message- system extensions are not valid

Similar Messages

Maybe you are looking for