After some running time I cannot download large files via any browser.

I am running OS X 10.9.2 on a 27inch iMac 2013 model.
If I keep it running (without sleeping) for some time, perhaps a week, I can no longer download any large files via any browser. It will start and after a very short time go down to 0 B/s, stall there and at the end aboft with an "Unknown network error" or something similar.
Has anyone seen similar problems?

Open router set up using http://192.168.1.1  .....you will see username & password .....leave username blank & in password use admin...............
Click status tab..........check firmware version .......download the latest firmware from http://linksys.com/download ..........
Udate the firmware ....reset the router for 20-30 seconds ........ later on reconfigure the router ........

Similar Messages

  • Airport Extreme with Ubee D3.0 - cannot download large files.

    Hello all Macoids!
    Here is my issue...
    I am on Charter Cable Network using Charter's provided modem Ubee D3.0 It is connected to an AirPort Extreme "main base" vie ethernet cable. That AirPort Extreme that I call "main base" distributes the WiFi throughout the apartment to other AirPort devices. And it all works.
    However...
    I cannot download large files on Wi-Fi using iMac or even while connected to the AirPort Extreme main base via ethernet cable on my MacBook. What is interesting that inside of iTunes I can download large files with TV shows episodes just fine, but the update to an iPhone or an iPad will stop after 10 or 100 megs with error message "Unknown Error 9006" occurred. Interestingly enough, if I will drag the Download window in iTunes around while it is downloading 1.4 gig iOS update file for iPhone 5 - it will complete fine. So it looks like Airport main base (or whichever Mac is used) looses the connection to a download server or Ubee D3.0 modem, unless I constantly "renew" it by dragging the Download window around.
    That is quite annoying to do for 15-20 minutes… Same happens on MacBook Pro that is actually connected to an AirPort Extreme main base via ethernet cable...
    Macbook running OS 10.9
    iMac running OS 10.8.5
    Same thing.
    I would've call Charter but knowing well they have usually no idea what is up I thought to ask here if anyone has the same problem….?
    Any smart suggestions not based on experience?
    Anything appreciated very much!

    I ended up reformatting with HFS and the problem was solved, sort of.  The AEBS can now handle large files.  But that allowed me to expose yet another serious firmware bug (version 7.6.1), namely that if you use "account" style fileshares, the fileshares are not reliably accessible anymore, and frequent rebooting of the AEBS is needed to bring them back.  A quick test for whether this has happened is just attempt at ten-minute intervals to create a file on a read-write share.  You'll find it can work for up to a few hours, but at some point it will fail.  Makes the AEBS essentially unusable for account-based fileshares.  I
    With firmware 7.5, I'd noticed a variation of this problem, which was that editing the fileshare permissions on the AEBS resulted sometimes in a corruption of the fileshare rights.  When this happened, you needed to reinitialize the AEBS completely.  So I hoped that in 7.6 they fixed the probems.  They fixed that one but added the new one.
    For now, the workaround seems to be using a device-based password for the fileshares, and forgetting about account-based shares.  The huge problem presented by this approach is that all users have full access, so I await Apple's next attempt at stable firmware with great anticipation.  If only they had a beta test program, other than their users, we would not be in this near-constant state of working around serious bugs.

  • I cannot open pdf's via any browser links on my macbook running leopard 10.5.8.

    Hi, I cannot open to PDF's via any browser links on my macbook (1 yr old) running leopard 10.5.8. I have latest adobe reader installed but when I click a link to open a pdf from various sites no matter what browser it just opens a blank tab. Any thoughts?

    Here, it has to be there, but it may be minimised. You just have to press the grey arrow. I took a before/after screenshot for you.
    Before:
    After:

  • Unable to download large files via my Mobile Network

    I have unlimited mobile data but I am unable to download large files, like podcasts unless I connect to Wi Fi. My settings are set to use mobile data, is there anything I can do?

    There is a 50meg (recently upgraded from 20) per file download limit over cellular data. No, you can't change that.

  • Problem downloading large files via Safari

    When downloading large video files (for example, from FilesAnywhere.com), my download stars off OK and then slowly gets slower and slower... and slower and then seems to grind to a halt. I'm currently attempting to download a 165MB file which has taken all day so far, and the time remaining just gets longer and longer. It now stands at another 18 hours, but by the morning it will most likley tell me there's a week left.
    Does anybody know what is causing this? I can download via FTP with no problem very fast -it's just via Safari that seems to be the problem. I'm on a home broadband account.
    I've encountered this problem before and I just had to give up on the download.

    Good to see the problem was solved from the suggestion provided. Glad to have helped.
    Aloha from Big Island.

  • After most recent update (3.6.10) cannot connect to internet via any browser or application (Windows Vista)

    I recently updated Firefox to 3.6.10 on a Windows Vista machine and have been unable to connect to the internet with any application since. Any help you can provide would be graciously appreciated.
    Upon receiving the "Firefox has updated and needs to restart" message, I continued to browse the internet for a period of time. When I finished what I was doing, I restarted the browser. When it came back up, it failed to connect to the internet. Signal strength from wireless network is "Very Good" and indicates that I am connected to the internet. I have tried the following with no success:
    - Attempted to connect to internet with Internet Explorer
    - Restarted the machine
    - Disabled Windows firewall
    - Checked that Internet Options settings had not changed
    - Connected to different wireless networks
    After each of the above, I tried to connect with IE and Firefox.
    As an amateur it seems that this isn't a Firefox problem, but I have to assume since the connection was good immediately before restarting the program and the completely inoperative after restarting, that it has something to do with the installation. Thank you very much for your time.
    Reed

    PROBLEM SOLVED:
    In Internet Options under Connections > Settings, "Use system settings" was selected. Changing the selection to "Automatically detect proxy settings for this network" in connection settings allowed all applications to connect to the internet.
    Why "System settings" continues to work on my XP system after the update and why it worked on the Vista system before the update but not after the update is a mystery... but as long as it works, who cares

  • Bridge Browser = "Cannot Download Corporate Files"

    I Have ATT, got bridge app through work around, connects great, everything works except the bridge browser.. it gets me up to my favorites, but when i try to access a webpage, pops up: "Cannot Download Corporate Files"... Anyone else getting this message? Is this ATT blocking it?

    I am also on AT&T--found the bridge workaround, and all worked swell bridged to my torch.
    Today, after plugging into my laptop and dumping some photos onto my playbook, I now find that my bridge browers no longer works!  it gives me back this same message "cannot download corporate files" with any website that I try to go to.
    I called the shiny new playbook support line, and they said they've never heard of this.
    They had me delete the connection and bridge software, reboot both, and reconnect.   It lost the favorites I had already saved on the bridge browser (so it definitely wiped the old off), but same thing...the browser isn't working and still brings back this "cannot download corporate files" error message.
    They said it was probably an AT&T bug and that they are working with AT&T to any day now get the bridge onto the appstore.
    anybody else have any suggestions?  I was worried that this was a websense corporate IS issue with my company's exchange server, but now it sounds like potentially an AT&T blockage?
    thanks for any ideas.
    jdztex

  • HT5622 After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

    After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

    After restored factory setting, I cannot download apps if I do not upgrade the ios of my 4s. However, many people saying that upgrading to ios7 in 4s will make it run very slow. What can I do?

  • Can I download large files a bit at a time

    I'm on dialup and I'm wondering if it is possible to download large files, such as security updates, in small bits like you can do from a P2P network.
    Can I adjust a preference, download a utility, buy some additional software?
    Thanks in advance for any suggestions.
    G5 iSight   Mac OS X (10.4.2)  

    Thanks Niel for the link. I downloaded that program, and then, knowing what to look for, located a few others as well.
    I'm sure they all will allow me to download large files, but how do I get these programs to press the button that says "Download". I go to the page that has the "Download" button, copy the web address for that page, paste it into the program, tell it to download, but of course all it does is copy the page.
    I know there must be an easy way to do it, but after a few hours of trying I can't fathom it.
    How do you find the web address of the actual file?

  • SSRS 2012 report integrated with SharePoint 2013 issue :Report refreshing after some idle time

    we have SSRS 2012 report integrated with SharePoint 2013  , when we click on any toggle item after some idle time of 60 secs and try again to expand
    another toggle item then  complete report is getting refreshed and  if we are in child report it is redirecting to parent report. . we didn’t set any refreshing property at report level. I hope there will be some idle time setting at sharepoint site
    level.
    what we observed.
    1. there is no problem when we expand toggle items without any idle time.
    2. when we open the report and expand few toggles and keep idle for 60 seconds and try
    again to expand another toggle item then  complete report is getting refreshed (all toggle items are collapsing).
    3. If you keep idle for 60 minutes and if you didn’t do any action like expanding toggle
    items it is not refreshing.
    why it is happening and how to stop that complete refresh.
    Surendra Thota

    Hi Surendra,
    I have tested on my local environment and the issue can be caused by the session time out ,the time out of the report precessing, database timeout,DataSet query execution timeout and so on.
    I would like to confirm that the refresh you have mentioned is the page refresh or the report reloading?
    Please reference to the setting below to don't limit the timeout values if you got the report reloading:
    Point to a report in the library.
    Click the down arrow, and select Manage processing options.
    In Processing Time-out, select Do not time out report processing or
    Limit report processing in seconds if you want to override that value with no time-out or different time-out values.
    If you got the session timeout that refresh the page, please reference to the setting in below article:
    http://msdn.microsoft.com/en-us/library/gg492284.aspx#bkmk_session_settings_section
    Details information in the article below about the timeout setting for your reference:
    Set Processing Options (Reporting Services in SharePoint Integrated Mode)
    If you still have any problem, please feel free to ask.
    Regards
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    So whenever I try to download the newest itunes file it won't let me finish the install process because I'm missing the "Itunes.msi" file whatever that is and I've done some searches but I cannot find the file. Anyone know what to do?

    you can try this thread maybe? https://discussions.apple.com/message/16217061#16217061

  • After release Logic X i cannot download Logic 9

    After release Logic X i cannot download Logic 9 that I previously paid. Is there any other option how to download app?

    Yes, you can, but you have to be logged into the Mac App Store with the same Apple ID you used to purchase Logic Pro 9 - and make sure you didn't hide it.

  • My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?

    Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
    Regards
    TD

  • I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off,

    good afternoon, I have a problem with the touchsmart 420pc, after a running time (2 hour approx) is turned off, probably warming, but this rare, is suddenly going slow parapadear and image.
    also sounds like when damaged ballasts for lamps,
    ANYONE know what could be the cuasa and / or what is causing this.
    greetings and thanks in advance

    Hi,
    Please write your TouchSmart model number, which system are you using and country of purchase.
    Resource:
    How Do I Find My Model Number?
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • MVC 5 - After some idle time, users are prompted to enter windows credentials on [allowanonymous] controller

    I have set up a web application using windows authentication and have two views for allowanonymous access. In the two views I also have partial views and have function which gets a list of items by calling the enumerable function in the model class.
    Everything all seems fine when accessing the allowanonymous view pages but after some idle time I get prompted to enter username and password. It is consist across different environment DEV, UAT so I am very worried it will happen in Production environment.
    And it seems to go to the home page (http://localhost/home} after failing the credentials.
    See the following configuration I have. Please help.
    in web.config
      <location path="SomeControllerName">
        <system.web>
          <authorization>
            <allow users="*" />
          </authorization>
        </system.web>
      </location>
    In controller
    namespace namespace.Controllers
        [AllowAnonymous]
        public class SomeControllerNameController : Controller
    In IIS
    Anonymous Authentication setting
    Status : Enabled
    Anonymous User identity: IUSR
    Windows Authentication setting
    status:Enabled
    Extended Protection:Accept
    Enable Kernel mode authentication: ticked
    Provider:NTLM
    ASP.Impersnation :disable
    basic authentication :disabled
    Form authentication:disabled

    You put allowanonymous so everyone has the right. It will not be authenticated.
    Anyway you should post this in http://forums.asp.net.
    chanmm 
    chanmm

Maybe you are looking for