After successful execution Workitem still remains in the Inbox.
I am sending CG56 workitem to sap inbox which contains two terminating events approve and reject. same task ( cg56 ) is used 3 times in the workflow sequentially.
First & Second time it reads the terminating events and the workflow process further
But for third time when the workitem in the inbox is processed successfully, workitem is still seen in the INBOX with status in process. The Terminating event (approve or reject) is fired but the workflow log shows the event has not terminated the workitem and wofkflow has not proceeded further as if no event was fired.
Now when i try to again execute the same workitem that is in status inprocess and come back without updating the trancation, the workitem disappears and now the workflow log shows the the third step is executed and workflow proceeds further.
I am not able to understand the problem.
Please help.
Hi pavan thanks for you reply ...
There is only one task. but used 3 times in the workflow. this task has two terminating events.
If you read the query now you should able to understand the issue.
Thanks.
Similar Messages
-
Cannot delete the Folder on the desktop after Mavericks update. when I try to delete it, it is asking for logon password, When I give the logon password, it plays a sound of moving to Trash, but the folder still remains on the desktop
Please helpIt is a folder which I have created. Name is "SAP".
I copied some of my office stuff and then deleted the contents inside the folder. But I couldnt delete the folder SAP.
This is happening after the Mavericks update. -
After successful execution from test lab,status is showing as not completed
We need you help in resolving an ALM Issue.
After successful execution from test lab the Automatic Runner popup shows as the test execution status as "Passed" ,But after closing the Automatic Runner popup window the Tesl lab execution status is not updated and it shows as "not completed". Can you please look into this issue and provide the resolution...
We Would appreciate for your valuable support.
Before closing the Automatic Runner popup,Runner popupStatus:.
After closing the Automatic Runner popup window the Tesl lab execution status:The issue was related to Note 959209
-
Personal Domain changed but iWeb still remains with the old one
Hi,
recently I changed my Personal Domain on MobileMe. Unfortunately iWeb still remains with the old one: Even if I create a new iWeb-Domain the problem occurs. I also checked whether this is a local iMac problem or not but it isn´t unless I have the same issue with my MacBook Air using the same MobileMe Account. Every time I open iWeb the 'Settings Page' shows the old personal domain name (displayed in brackets behind the MobilMe Account information). At MobilMe the new Personal Domain name displayed as the active one.
Any Ideas?
Thanks in advance
MiklI have this same problem.. Any help would be appreciated!!!
-
One of the e-mails in my ipad deletes messages automatically after reading without backup. What do I do to correct this so that my mails would remain in the inbox for reference purpose?
As you are on a residential service you have to wait for engineer availability priority is given to Business users as they get a different service level agreement also using a residential line for business use can leave you open for suspension or cancellation of service as it breach's the terms and conditions
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
After deleting users from iPlanet Calendar Server(iCS), the users'
subscriptions still remain. Then, if a user tries to unsubscribe
from a deleted calendar, the server sometimes crashes, even though sufficient
disk space and memory are available. When checking the HTTP log, the
log shows that certain calendars don't exist.
The solution to this problem is to back up the ics50gse.db
file to another file with a different
name, or remove the file from the db
directory.
<P>
If you are upgrading your iCS, make sure the GSE database queue is empty
before you perform the upgrade. To check the GSE database queue,
you can use either of the following commands while the server is either
running or stopped:
<P>
csschedule list
<I>OR</I>
csdb -v list
<P>
After issuing the command, if nothing is displayed, the GSE queue is empty, and
you can proceed to step 3 below. However, if the queue does contain
items, use the following steps to flush it:
<P>
<OL>
<LI>Start the server if the server is in a <I>stopped</I> state.
<P>
<LI>Stop only the cshttpd
daemon so that no new requests can
come in.
<P>
Note: It should take only a few minutes for the GSE to handle any requests.
Typically, the GSE queue will be empty.
<P>
<LI>Shut down iCS.
<P>
<LI>Rename the ics50gse.db
file.
<P>
<LI>Restart the server.
</OL>
<P>
If you have already upgraded the server and are experiencing the above
mentioned problems, use the following steps:
<P>
<OL>
<LI>Shut down iCS.
<P>
<LI>Rename the ics50gse.db
file.
<P>
<LI>Restart the server.
</OL>I forgot to mention that I've cleared out ~/Library/Caches/ for my test user, as well as deleted the iWeb .plist file.
-
I was looking through my pictures and when i tapped to see a specific one my ipod blacked out. Now the screen only shows the apple icon and I cant go anywhere. I tried preshing the on/off and home button but it won't work. I even pressed both at the same time for 10 seconds and still nothing... I connected it to my lap top and went to my itunes account but it tells me that the device that i just plugged in has an error. I already tried plugging it back in several times and it still won't work. I don't know what else to do. I havn't had it for a whole year yet so its still insured to the apple company right? at least thats what I heard
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Splitting a library does not remove the folder I moved from the original library. I exported a folder of 3000 images from the original library to a new library. The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
The new libraryb was created alright, but the folder and the 3000 images remain in the original library. Why? And how do I safely remove them?
Exporting a library will create a duplicate of the exported library items. Usually you do this to work on a partial library on another computer and later merge the changed images back. Splitting the library is not the primary purpose of exporting.
If you want to remove the library items that you exported, select them in the source list of the library inspector and delete them (File > Delete Original Images and all Versions). Then empty the Aperture Trash, after checking that you did not trash more than you wanted.
But check, if the backup of your Aperture library is in working condition, and check the exported library carefully, before you do such a massive delete.
Regards
Léonie -
I took AVG out of my computer, but it still remains on the tool bar
I deleted AVG from my computer, but it still remains on my tool bar
Try this:
http://support.apple.com/kb/ht1430 -
WS14500028 BADI WF for Bid Invitation: No workitem is sent to the inbox
Hi All,
I was tasked to troubleshoot the existing workflow of the client. The workflow was able to determine the approver who will receive the workitem for his/her approval. However, the workitem is not seen in his inbox. Since there has been no workitem passed on to the approver's inbox, the workflow stays hanging and the document could not be converted to PO and Confirmation.
What do you think may cause the problem? Does it also involve the implemented BADI? Does the BADI only determine the approver or does it also control the workitem to be passed to the approver?
Please let me know your recommendations and suggestions to this problem.
I'll generously reward points for helpful answers.
Kindest regards,
ReymarHi Masa,
How are you?
I think I've met you before here in the Philippines (I just started learning workflow that time).
I was able to do those steps. However, the log says that the BADI WF for BID Invitation No. xxxx, GUID xxx has a waiting status and there is no icon present under the agent column.
What do you think is the problem?
Thanks for your response.
Regards,
Reymar
Edited by: Reymar Ellazo on Mar 12, 2008 11:57 AM -
How to use the data that we got after successful execution of a Bapi
I have created a simple Webdynpro application to execute a user defined Bapi and that was executing successfully but the next step when i want to use the data that which i have retrieved from that Bapi i am facing problem.I am unable to use that particular data
My idea is to use that data and again i want to filter that particular data which i got from the Bapi execution with out calling another Bapi
Ex: I wrote a user defined Bapi to retrieve flight details if i enter the id of the particular airline
Then i executed my webdynpro application and i am able to get the output
from that output i want a particular flight details if i choose the City name i.e. the details related to that particular city which i chooseHi Praveen,
Thanks for the Help,
I am working with the same scenario which was there in the PDF sent by you but in that document it was directly allowing us to click on the output which we got after executing a Bapi, but here when i am executing i didn't know the procedure how to make use of the data which we got after execution and displaying it in other view
can we write any code to access that particular data that we got after executing that flight scenario and do some operations on that particular fields
thanks and regards
Raghu -
Patches still remains on the machine after un installation of lync application
On my machine I have office 2013 professional installed on it over thst when I try to install lync and some msp which is in update folder application installs successfully but when I try to remove lync 'setup.exe /uninstall Lync' it remove only the main
product and and not patches.
Can any one please help me in finding any solution on this.
Thankin advance.I understand you want to uninstall Lync and reinstall it. To troubleshoot the issue, I suggest you do some steps as follow.
Uninstall Lync Client in Control Panel.
Delete security credentials and clear the cache.
1) Locate the local application data folder:
Windows Vista and Windows 7: %LOCALAPPDATA%\Microsoft\Communicator\<\">[email protected]>\
Windows XP: %USERPROFILE%\Local Settings\Application Data\Microsoft\Communicator\<\">[email protected]>\
2) Delete the file that is named EndpointConfiguration.CACHE.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali -
After closing firefox, firefox still remains in memory with use of huge amount of memory
Hello,
I'm now using 10.0.1 but the behavior started around version 7.x i believe and it's becoming bigger witch every update?.
My configuration.
P4, 2.6 Ghz 512 MB memory, 120GB harddrive, Windows XP sp3 with all the updates.
While using firefox to explore the internet and using Scrapbook to save the pages that i want (Familytree search of our name in the past, present and..) firefox becomes terrible slow, hugh need of resources of swap memory up to 1,2 GB, i want to close firefox. After a 10 to 20 seconds firefox disappears from the screen but when i open (ctrl-alt-del) windows Taskmanager the process is still going on and often even needs more memory for several minutes (> 5) and i have to kill the process to go on. If i restart firefox after that it's treapears like the normal firefox but after a while the same thing happens again.
Sorry for the (perhaps) mistakes in my writing but englisch is not my native language.
Theo SmallenbroekSome activities may use quite a bit of memory, and if memory is low on the sytem Firefox is forced to page and slow down. Does the problem occur only when you do certain tasks or use a particular site. Does it only occur while you use "Scrapbook" - whatever that is, and have you tried using Firefox in its [[safe mode]]
There is a posibility that the problem is malware related.
* see [[is my firefox problem a result of malware]] -
The "apple ID Password" box along with the keyboard pops up when I turn the iPad on and it stays there. I have changed my email address on my iMac and also changed my password. The old email address is still on the iPad. Anyway, I can't use the iPad because can't get the apple id password box to go away. Thanks for any help!
This is an older photo but the sleep and home buttons are still in the same place on all iPads. The home button is the round button at the bottom of the iPad and the sleep button is also called the on/off button and it is at the top right corner of the iPad.
-
Even though I delete items the storage still remains at the same level
I have tried to manage my storage I deleted several apps yet the memory still states that it as the same amount. I am now unable to update apps.
Hello lunaspalace
Check out the article below to view the storage on your iPhone. From there you can see what apps or music is taking up space on your iPad and can actually delete things straight from there with a swipe of the finger.
Understanding capacity on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1867
Thanks for using Apple Support Communities.
Regards,
-Norm G.
Maybe you are looking for
-
I navigated to disk utility and verified disk, which returned no errors.
-
Idoc - for inbound delivery order confirmation
Hi, Can some body give me the idoc for Inbound SO Delivery Order Confirmation and if any BAPI method is there to create Delivery order confirmation. With Regards Vasu
-
Modifying static variable in 1object dosent effect value in another object
Hi, I have a simple class that declares a static variable x... class DeclareStatic static int x = 10; }I have another class that modifies this static variable (x)... class ModifyStatic public static void main(String[] Args) Declar
-
Quick question about multiple JFrames
I have run into a rather simple problem that I am unsure how to solve. My program contains multiple frames that are called in succesion. My question is: how do you make the 'background' frame (the frame making another frame) unreachable. I don't want
-
Version Naming Convention for Internet Explorer
Notice on the far right side there is a Emoticon smiley face on the far right side. This comes directly out of something I read and also did almost twenty years ago. Did this cause the version update to 11? I am not familiar with the metrics to ca