After switch to a new workspace always 'Sign In'

Dear all
After I once switche to another workspace in Flash Builder 4.6 with CS Extension Builder 2 I am unable to compile my projects. (Switching back and forth does not help btw.) Building workspace starts, at 33% I'm asked to sign in the CSIED1 form with my Adobe ID. I enter email and password, a spining weel appears with "Please wait a moment", the window disappears and pops up again at 66%, same procedure and the build fails with the following error:
Errors occurred during the build.
Errors running builder 'Adobe Creative Suite Extension Builder' on project 'matchmycolor'.
Please log in with your Adobe ID to use Adobe Creative Suite Extension Builder
Please log in with your Adobe ID to use Adobe Creative Suite Extension Builder
If I use a wrong password I get "The Adobe ID and password do not match. Please try again.". So that's not the issue.
I tried to uninstall the CS Extension Builder from Flash Builder, did not help. Then I tried uninstalling the Extension and also complete Flash Builder 4.6 (had to run the Creative Suite Cleaner Tool because uninstall failed). Afterwards I reinstalled everything but the error reappeared.
Anybody an idea what happens here or an idea how to fix this problem? It's pretty anyoing.
I think the uninstall procedure still keeps the licence information in the background/registry, whereever this is. Anybody know how to clean this up so that I can to the point again where I have to enter the serial?
Thanks!

Thanks. But what I really want is to import the folder organisation from iPhone to iTunes. It is tedious to reorganise all my 300 apps again.

Similar Messages

Apps stop syncing after switching to a new pc

After switching to a new pc, I have complete the "transfer all my purchases from iphone", the sync finishes without error messages, the music/books get sync'ed but my app updates etc are not syncing even with manual sync. I know I can probably solve this by completely backup+restore my iphone, but is there any other way? thx.

Try deauthorising your PC and authorise it over again, this can sometimes clear a "not authorised" problem: About iTunes Music Store Authorisation and Deauthorisation
You could also have a look at this article: iPod does not play content purchased from the iTunes Music Store
If you continue to have problems you can email Customer Services from this page, they may be able to help: iTunes Music Store - Authorization FAQ

Serial Number is "not valid" after switching to a new computer

I just upgraded from an old white Intel iMac to a new 27" iMac, and after I moved all my files over with the Migration Assistant, my Final Cut Studio doesn't work. It asks me for a serial number, I put in the one I've been using forever, and it says it's not valid.
Any idea what's going on? I'm working with the new version of Studio, if it matters, and it's going it when I try to open any of the programs included in the suite.

1. Never EVER migrate pro apps.
2. see #1.
3. see #2.
Time for an erase of the software (look up Digital Rebellions FCS remover) and do a clean installation of the FCS suite. If that doesn't work, do a complete erase of the system hard drive and install everything from scratch.
x

Community profile lost after switching from facebook-connected to email-based account?

Hi there, apparently I do not have access to my old facebook-connected profile here in the community after switching to a new, e-mail based account. Is there a way to merge my new account (alexanderklar) with my old one (klar)? Or maybe reactivate access to my old account via my e-mail-based credentials? Thank you and best regardsAlexander Klar

Hey , looks like your account is now ready!
Log in with "alexanderklar" and it will log you back into your old account automatically! :)

I switched to a new computer...

After switching to a new computer, I was successful in moving my music library to the new computer, but after I purchased some music I could no longer access my music. It is giving me an error message that it cannot locate the original file. Also, apple sent me a message informing me that music had been purchased from a different machine using my account number (which of course, I already knew.) Any ideas how to successfully make the transition to a new computer without problems?

Do you use automatic downloads?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change. Can anyone help me?

I cannot connect to the internet after switching providers. I've changed the email address associated with the new account but am sure there is something else I need to change.   I have also changed the apple information as well including user name and password. Can anyone help me? (This is an ipad question).

Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
iOS: Changing the signed-in iTunes Store Apple ID Account
http://support.apple.com/kb/ht1311
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have just switched on my new 5s and gone through the intro sections. After entering my apple id, I selected the icloud update I wanted it to use (from my 4s). It is now stuck on the progress bar screen. What can I do?

I have just switched on my new 5s and gone through the intro sections. After entering my apple id, I selected the icloud update I wanted it to use (from my 4s). It is now stuck on the progress bar screen and has been for hours. Can I get it back to the original settings? I want to set it up as a new phone, until I can get on to a better wi-fi signal. Any help would be great.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Running Photoshop CC on iMac w/ 2 monitors. The black application background is stuck to the top left between the 2 monitors, tried resetting workspaces, new workspaces... no joy. I'd just as soon eliminate it as its always in the way. thanks

Running Photoshop CC on iMac w/ 2 monitors. The black application background is stuck to the top left between the 2 monitors, tried resetting workspaces, new workspaces... no joy. I'd just as soon eliminate it as its always in the way. thanks

alright. reformat, no longer have and fan-controlling software running, SMC reset, software update, etc. New, precise test using System Load to add a load to the cpu, Hardware Monitor for the temperatures, and TFMonitor for fan speeds. Running both CPUs at 99.5%*, the CPU fan sped up to just over 1500 rpm (HDD and ODD fans stayed relatively the same), from its resting 1198, with the temperatures maxing out at:
PSU: 176°F (80°C)
CPU Core 1: 164°F (74°C)
CPU Core 2: 171°F (77°C)
System Load and Hardware Monitor (or Temperature monitor) are from: http://ciderhouse.ivory.ne.jp/wp/english/
and TF monitor is from: http://ciderhouse.ivory.ne.jp/wp/english/
Now, to someone with more experience than I, are these numbers within reasonable operating range? And if the CPU fan can go as high as 3300 rpm, why would it not go any higher than half that? (smcFanControl reported 3300 as the max before I reformatted, but after reformatting I can't seem to get it to work)
It just doesn't make sense to me. ....and I'm not fond of the heat radiating off the monitor...
*I tested it up at almost 100% because with the work I do, I often do run around there. From time to time I do 3D renders and video work, and Photoshop almost never closes on my computer.

SEM BPS locking even after user switches to a new variable value

Hi,
This is locking related question & appreciate any kind of suggestion.
Users are locking previously planned variable value even after changing to a new value which is causing another user with a locking issue.
I've a variable GROUP defined at planning level & included in the planning folder.
let's say USER1 is planning for GROUP1 & saved the data after planning.
same user has changed the variable to GROUP2 & is planning now without leaving UPSPL session.
at this point, when USER2 tries to plan for GROUP1 & is faced with a message "USER1 is currently processing the data".
currently, USER1 is planning for GROUP2 right? so, why it's still giving locking message (locking GROUP1).
I even followed SAP note 635244 & created a DB table & included GROUP characteristic in to the table but of not much help.
even after this, I still see that USER1 is locking both GROUP1 & GROUP2 in report UPC_ENQUEUE_READ.
Appreciate if any one can share your ideas to deal this kind of issue.

Hi Hari,
You indicated in your 1st post, that User 1 is able to access both Group 1 and Group 2. I am assuming in your configuration, multiple users share the same values in the Group variable and they are making selections on execution of your planning application.
If this is the case, User 1 switching to Group 2 using, e.g., a drop-down menu does not remove the lock on Group 1. Hence User 2 will get the lock message.
You defining a table in DDIC only specifies Group as a lock relevant characteristic. It will not prevent locking in this fashion.
The probable options could be:
1. Consider dividing Groups amongst users, and use user-specific values for your variable;
2. Consider additional characteristic that will separate data sets.
The central question I would ask about this planning process, is why would different users be editing the same group at the same time? Is there a way to differentiate their planning needs? That might help in your modeling.
Hope this helps.
William Lee

My new ipod touch goes dim after switching on for about a minute?

my new ipod touch goes dim after switching on for about a minute?

Settings > Brightness > Auto-Brightness (turn off)
You're apparently in the hairy edge of ambient light being just barely dark enough to justify dimming the screen.

Lost all ratings, playlists, etc... after switch to new pc.

I know there are many topics like this, but I tried everything I found on the subject without any result.
I bought a new pc and removed my harddrives from the old one to the new one.
After reinstalling itunes and changing the location of the default itunes media map to the one where my old files are nothing happened.
I then tried to import the 'iTunes Music Library.xml' file.
(On a side note, took me a long time to find 'Import playlist' because the threads I was reading didn't mention to press Ctrl+B to get the old menu bar back.)
That didn't work. It imported all the music. But no playlists and the tracks lost their rating.
I then removed the xml and the iTunes Library.itl and replaced them with automatic backup files I have through crashplan.
No results, even going back several versions of the back ups.
The weird thing is these files say the last version of them is 2009 ?
Before switching pc's I made sure the itunes media map was the one I was using,
because I remember itunes changing it a couple of time back in the days after updates without asking.
The location hadn't changed and everything in crashplan was backupped correctly.
I've been messing with this for hours and I'm close to a panic attack knowing that I still have to connect my iphone for the first time.
Something tells me that's gonna be misery too. Lost months of pictures etc after switching from 3GS to 5S.
Anyway, if somebody knows how I can get years of playlists and ratings back, I would be very grateful.

When itunes upgrades, it saves a copy of the current database in a folder named Previous iTunes Libraries.
Copy & paste the mose recent one to the folder one level up, and rename it to get rid of the date.
For example
itunes/Previous itunes libraries/iTunes Library 2010-03-31.itl
This shows my last upgrade was 31st March 2010.
With itunes closed, copy that itl file and paste it in the itunes folder.
Rename it so it looks like this
iTunes Library.itl
You'll have to delete the current (blank) itl file first.

I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged. Will Apple refund me for the audio book?

I was not warned that audiobooks are a one time download only for those using iCloud to backup. As a result I've lost my audiobook when switching to a new iPhone after the previous phone was damaged.
Will Apple refund me for the audio book?
the irony of this is that the lost audio books is Steve Jobs biography!
Starting to wonder about the benefits of Android :-/

If you haven't been keeping a backup of your downloads (none of your iTunes downloads are included in an iCloud backup, apps, music etc are only redownloadable whilst they remain in your country's store) then you can try contacting iTunes support and see if they will grant you a redownload : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

my new i phone 6 plus some time not connecting wifi after switching off it start and after some time gain its stop connection please advice

settings - general - reset - reset network settings.

After Effects and the new Mac Pro

I recently got one of the new Mac Pros and it doesn't get along great with After Effects, particularly when it comes to ray-tracing. There is no Nvidia GPU option for the new machines, so ray-tracing defaults to CPU. But then, even with a simple solid, it gives you an out of memory error. I've seen postings saying this is fixed in 12.2 but I've got 12.2 and the newest CUDA driver installed and run the machine with all other apps closed, but no luck. Presumably I'll figure out how to get it running after a fashion eventually, but even then, even with the new machines' many fast cores etc, CPU ray-tracing on the new Mac Pro is not looking promising on the speed/usability front.
Element 3D is an option, but its reflections can't interact with the comp the E3D object is within, only with the environment map in the plug-in itself, so there are many cases where it's a poor substitute.
My question isn't really how to get ray-tracing to work with the new machines. That would be great, but my sense is the answer there is, it effectively can't.
My question is, given that motion graphics increasingly involve the complex interplay of light, reflection, transparency, and three dimensional objects, and that from here on out Mac Pros will no longer accommodate nvidia cards, and that many creative types will only work on Macs, how long will this state of affairs continue? How long can it continue? Are there any plans to make After Effects fully functional on the new Mac Pros? Ray-tracing has always been balky and wonky and prone to error messages and crashes, but despite all that it's also an indispensible part of After Effects.

A fun update, long after the fact:
So I've learned Cinema 4D in order to reacquire the capability After Effects once offered internally and have succeeded after a fashion. Let's look at the relative ease of the new method versus the old one using a real-world scene from my project: Adding a bus shelter over actors on a bench.
In ray-trace enabled After Effects of old, I could draw simple draw shapes in Illustrator, extrude them into objects, collect them under a null and position it in my scene. Particularly powerfully, I could bend 2D photograph layers into half-domes for a fun roof, and create planes of transparent glass of any thickness I chose with refraction levels that made for interesting visuals as actors moved behind it, and add reflectivity to any layer I chose -- including the dome roof, for instance, which would then pick up the reflections of any other objects in my scene. I could also put 2D layers in front of my bus shelter as easily as placing a layer closer to the camera than the makeshift model. Well, sometimes it didn't work as advertised; sometimes you also had to have the foreground layer above the background one in your comp even when both were 3D and that wasn't supposed to still apply, but at least it was After-Effectsy. The whole thing was After-Effectsy, which of course is good because presumably AE users know AE, but also it was similarly logical.
To achieve a similar end with C4D and Cineware, all you have to do is this: Build your bus shelter model in Cinema 4D. Wait, first learn Cinema 4D, a hugely complicated piece of software. Come back in 3 months, I'll wait. Hi again. I see you've built your bus shelter. In fairness, you were able to add textures and complicated curves you couldn't in After Effects. But then you always could, if you were willing to learn a hugely complicated piece of software. Anyway, let's get that model into after effects. Just drag that C4D project into your AE project and put it in the comp. Put other layers in front of it or behind it. Easy! Now just a few caveats. 1. Scale. There is no formula available anywhere for the relative scales of your two projects. So tweak that. Just go back and forth between the two software suites -- I hope your computer can have both up and running at the same time! -- until you get that right. 2. Cameras. You can import your AE camera into C4D and vice-versa as easy as pressing a button in Cineware. It shows up somewhere strange in C4D unless you use a workaround unless you are also camera tracking in AE in which case you can't. 3. Scale again: Your camera will match its moves in both suites now. But they are drastically different sizes. If you import your C4D camera into AE it becomes tiny tiny tiny, if the scale of commercial C4D models is to be considered at all standard. Just shrink your model down to say 1% and you should be good to go. And if you tweak your camera in AE or C4D, you have to junk your imported camera and re-do that step. 4. Reflectivity. Your C4D model will only reflect items in your C4D project, not the, um, scene it's going in. 5. Refraction. Transparent C4D items will indeed show your AE items behind them. But you can't add refraction. 6. I've saved the best for last. Say you want your actors in your bus shelter, meaning part of the model is in front of them and part behind them. You used to place them (shot on a greenscreen or roto'd) in the bus shelter model. Now you simply do this: Divide your bus shelter model into halves, the in-front half and the behind half. Put both under nulls. Give the front null a C4D "tag" called compositing. At least its name makes sense. Then go into the tag and enable a numerical "object buffer." You're almost done! Next simply go into "render options" in C4D and into "multi-pass" there and then enable object buffers again there, so intuitive! Make sure to enable the same numerical object buffer you enabled in your compositing tag. Good? Good! Now, all you have to do is place two copies of your C4D project heirarchically in your AE project. You're still almost done! Now all you have to do is go into "multi-pass" in your Cineware plug in in the instance of it that goes in front of the actors and specify your numerical object buffer again. Wait, one tiny thing: If your Cineware plug-in is still set on the default "Standard" setting that option will be grayed-out. Just switch it to the much slower-rendering C4D opions and you're good to go! And don't worry about two copies of your C4D project in your AE one meaning it will now take twice as long to render, because it will. But, as a bonus, you've probably learned a lot of ways to render C4D models really well when learning C4D because Adobe made you. So you can use those to make your AE comp really shine... or wait, could, but they're not supported. You can however render it in that flat ugly video early Pixar style, but life is full of trade offs, no? You end up rendering out the layer you need in C4D and comping it into AE exactly as effects artists have done ever since always. Which is to say AE gave up even trying to do 3D and sent you into the waiting arms of a more-capable competitor, their seeming specialty in the world of video. Maybe it's better this way. AE was only ever for comping. It briefly got a swole head. Now it's back in its comfort zone. The end

Unable to create new Workspace

Hi all,
I successfully installed APEX 4.2 inside an Oracle 11g database. On the same server, I have setup a WebLogic 12c server which runs an Admin Server (default) as well as a manually added Managed Server. Inside the Managed Server, I successfully deployed APEX Listener 1.1.4. I was also able to configure the APEX database coupling via http://host:port/apex/listenerConfigure.
Now when I log in to the APEX Administration Console (workspace "INTERNAL") via http://host:port/apex/apex_admin and attempt to create a new workspace "myworkspace", I always end up getting the following error message:
Error provisioning myworkspace.
ORA-20001: Error during the Packaged Application installation.
Has anyone ever encountered the same problem? Can this be due to some access restriction (I'm thinking missing write-permissions in the DB)?
Some background info:
It is possible that something's clashing here with an old DB object: The DB was fully exported from an old machine with a 10g installation and fully imported into Oracle 11g DB on the new machine. The old 10g DB had APEX 3.2 manually installed. That machine was then used to create an APEX workspace and build an application in it.
Is it possible that when I migrated the complete DB, I unwillingly took some DB objects created by the old APEX-version (on the old machine) with me that now clash when I try to use the new APEX version?
Any hint is highly appreciated.
Thanks a lot, regards,
Chris

Hi Chris,
as a possible workaround, set "Create demonstration objects in new workspaces" = No in Manage Instance -> Feature Configuration -> Application Development. This will prevent the installation of the Sample Application when a new workspace is created.
After you have done that and created a new workspace, can you login into that workspace and install the Sample Database Application and let us know which error you are getting?
Your problem might be related to the following thread Re: wwv_flow_lists_of_values$ where template applications had been installed on instance level ("Manage Instance -> Manage Shared Components -> Template Applications")
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf
Edited by: Patrick Wolf on Nov 7, 2012 12:39 PM

After switch to a new workspace always 'Sign In'

Similar Messages

Maybe you are looking for