After synching ipod file not found

I am trying to sync a 20g ipod manually, it says it is synching...but at the end a note comes up saying that the file wasn't found. The ipod is only synching through 1/2 the alphabet.

Similar Messages

IPod- 80g synch problem - file not found

Am getting "the iPod cannot be synced as the required file not found" when trying to synch my iPod 80gig. New problem - is it the new iTunes software I downloaded ? How do I fix this ? please help as I have over 30gigs of music. Also why does my 80gig iPod say it only has 70 gigs of space in total, what happened the other 10gig?...
Thanks for your help in advance.
Fin

http://discussions.apple.com/thread.jspa?threadID=2380602&tstart=0

After kernel upgrade "file not found"

I upgraded to kernel version 3 and I rebooted but I didn't do anything in menu.lst, because I thought symlinks would work, so I rebooted but it didn't work. I tried to boot changing names in grub menu but I'm always getting same error "file not found" and I don't know what else to do. I can see the vmlinuz-linux but I can't see initramfs-linux file in /boot from a Live CD. Can you share your menu.lst to try them please.

tbuitenh wrote:
I ran into the same problem. I bookmarked this thread earlier, sorry if the problem has been solved in another one and I didn't notice it.
After putting back the kernel and ramdisk from a backup (using different filenames) and downgrading the kernel (mkinitcpio doesn't work, that's why I had to take the ramdisk from a backup), I was able to get back into my system.
I found a mkinitcpio.conf.pacnew, but no significant changes in there. Applied them anyway.
So let's try that again...
sudo pacman -Syu
(3/5) installing linux [######################] 100%
>>> Updating module dependencies. Please wait ...
/tmp/alpm_kwQ6VA/.INSTALL: line 10: depmod: command not found
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
/tmp/alpm_kwQ6VA/.INSTALL: line 12: mkinitcpio: command not found
Optional dependencies for linux
crda: to set the correct wireless channels of your country
That doesn't look healthy. Perhaps a path problem?
[tb@progress ~]$ su -
Password:
[root@progress ~]# pacman -S linux
warning: linux-3.0.1-1 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Targets (1): linux-3.0.1-1
Total Download Size: 0.00 MB
Total Installed Size: 54.55 MB
Proceed with installation? [Y/n]
(1/1) checking package integrity [######################] 100%
(1/1) checking for file conflicts [######################] 100%
(1/1) upgrading linux [######################] 100%
>>> Updating module dependencies. Please wait ...
>>> Generating initial ramdisk, using mkinitcpio. Please wait...
==> Building image from preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [autodetect]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux.img
6472 blocks
==> Image generation successful
==> Building image from preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.0-ARCH
-> Parsing hook: [base]
-> Parsing hook: [udev]
-> Parsing hook: [sata]
-> Parsing hook: [resume]
-> Parsing hook: [filesystems]
-> Parsing hook: [consolefont]
==> Generating module dependencies
==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
13946 blocks
==> Image generation successful
[root@progress ~]# ls -l /boot
total 12484
drwxr-xr-x 2 root root 4096 Aug 15 12:18 grub
-rw-r--r-- 1 root root 5216044 Aug 15 12:41 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 1460104 Aug 15 12:41 initramfs-linux.img
drwxr-xr-x 2 root root 4096 Jan 26 2011 memtest86+
-rw-r--r-- 1 root root 1453292 Jul 11 19:22 offmylawn.img
-rw-r--r-- 1 root root 2333056 Aug 6 16:22 vmlinuz-linux
-rw-r--r-- 1 root root 2305152 Jul 9 15:00 vmlinuz-offmylawn
That's better. I'll reboot now and see what happens.
@tbuitenh: I encountered this same situation today when I tried to update linux-ck-corei7 from 3.0.4-1 to 3.0.4-2. Like you, running pacman after "su -" (instead of "su") permitted me to complete the update.
I figure this has to do with default login path, right? What exactly is going on here, and how can I fix it? I don't normally run pacman this way.
Last edited by dhave (2011-09-22 23:07:53)

SQL Loader deletes data, after reporting a file not found error

I have several control files beginning:
LOAD DATA
INFILE <dataFile>
REPLACE INTO TABLE <tableName>
FIELDS TERMINATED BY '<separator>'
When running SQL Loader, in the case of one particular control file, if the file referenced does not exist, SQL Loader first reports that the file could not be found, but then proceeds to delete all the data in the table in which the import was meant to take place. The corresponding log file reveals that the file could not be found, but also states that 0 records were loaded and 0 records were skipped.
In the case of all other control files, if the file is not found, the log files simply report this exception but do not show any statisitcs about the number of records loaded/skipped nor does SQL Loader delete the data in any of the referenced tables. This is obviously the expected behaviour.
Why is SQL Loader deleting the data referenced by one particular control file, even though this file does not exist and the corresponding log file has correctly picked up on this?

in the ressource name box of your file model, when you push the search button ("...") do you see the file ?
Cause the problem can occur when you write directly the path without selectionning the file with the assistant.
Try this.
I think too that that you can't see the data by right clicking and selectionning View Data ?
Let me know the avancement...

"Ipod cannot be synched, required file not found" What do I do?!?!?!

I get this message, and then whan I try to restore my ipod, it says it cant be restored, error 1418.

Nobody has any advice?

File not Found error when synching Ipod

I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

IPod cannot be synced. Required file not found?

I havent had any trouble syncing my ipod until last week when i purchased a song. When i dragged the song to a playlist on my ipod, it appeared grey in my playlist (because it was still loading) and then disappeared. I repeated this until i gave up and I reported this as an issue to itunes. When i tried again it worked and i thought maybe the problem had fixed itself, but i tried to add a CD to my ipod a few days ago and it only synced half of the songs. Now when i try to sync the leftover songs an error box pops up saying "The iPod (name of ipod) cannot be synced. Required file not found."
Some songs will sync perfectly normal, some load but disappear, some eventually just sync, and some won't sync at all. Has anyone had this problem/ can anyone help SOLVE it? please and thank you!!!

Try this:
Let your iPod charge up.
Attempt to sync a large play list.
When the iPod shuts down and you get the error message, quickly click through the dialog boxes on iTunes so when the iPod comes back up iTunes will attempt to sync again.
When the sync starts again after the iPod reboot, click the little X in the bar that shows how many tracks have been loaded. This will stop the sync and you'll be able to eject your iPod.
After it's been ejected, unplug the connector from the iPod and see what happens to the battery indicator. Mine goes down to almost gone and red - then after a few minutes it comes up to about 2/3 strength - but it should be full after being fully charged and just syncing a few hundred tracks.

"File Not Found" MPG4 / Protected (?) songs unable to play on PC or on iPod

I burned about 150 songs from my iTunes Music Library on another computer onto CDs and then inserted the CDs into a new computer with my iTunes Music Library on it. The songs on these CDs DO NOT play in the iTunes Library or on the iPod, although the track titles and artists appear on my computer screen and hence they look as though they are included in the Library. When I try to play those songs I get an error message with an exclamation mark next to the problem songs saying "File not found. Do you want to locate file?"
I tried the option to convert them to AAC but that does not work. Is it a copyright problem or a technical one?
Many thanks for your replies!
Windows XP

Checking the "copy" box will solve the problem for future importing but not the current problem.
You could do two things after checking the "copy" box:
1) Delete the dead tracks and add them again from the CD(s).
2) With the CD in the drive, select Consolidate library on the Advanced menu. This will copy all files not currently in the iTunes Music folder into the iTunes Music folder, you may not want that if you have your music in other places as well. Also if the music you want is on more than one CD you may get a lot of error messages as it tries to consolidate tracks it can't find.
One other thing - you mention protected files in the thread title, iTunes will not import files protected by other programs.

Getting error message file not found unable to sync to ipod

90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD?

IPod Sycn issue - Required files not found

My iPod has been running well for a year and a half up until the last month. I have two Libraries which make up my music collection, my main Library on my PC running Windows XP of about 11 Gigs and about a Gig on my Laptop running on Vista.
When adding music onto my iPod - 30Gig video, 4th Generation, I think - I receive a message, saying iPod "could not be synced. Required file not found." After this, my iPod stayed froze until I let the battery run down, then I restored it.
I took it into the Apple store and the guy said the problem was either a faulty USB cable or a bad song file. I knew it wasn't the USB, and it has proven not to be since, as it works fine on both comps still. I thought I found the file, one the iPod froze up on syncing a while on the laptop. Got rid of it, seemed fine.
Until last week. My music collection has been getting bigger and I think I've hit a wall. I'll load my 11.5 Gigs from my PC, then I'll be able to load about a Gig onto my iPod from the Laptop and it'll freeze. It's not one specific file, it's frozen on a number of different files. I do the upload on the laptop last because for some reason it hates to Restore the iPod (unresponsive, not freezing but iTunes stops working).
I can't figure it out, is this a software issue or is it some hardware problem I can't fix?

Hey, I've been fighting with my iPod for the last two hours with the same REQUIRED FILE NOT FOUND error. I found little help on here. Finally, I decided to connect the iPod USB cable to another USB port on my machine... is synchronizing like new... actually, it is finished. No error.
So, maybe try a different USB port. Can't hurt.
Cheers.

I get error message''one file not found'' when tring to sync Ipod Nano 6th gen to I tunes. Help

I get error message''one file not found'' when tring to sync Ipod nano 6th gen to Itunes. Help

See:
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities

File not found error after log on to ADF application

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

Hi
I just took over an ADF application, after clicking on log in button, in the application_log, there is always a login.jspx -- file not found error message, the directory is not even exist. somehow the application had 'registered ' an directory for the login page, common\skin\login.jspx, the actural log in page is under common\login.jspx.
there is a loginfilter.java created and has a entry in web.xml. the login Filter has let httpServerRequest object to know that the login file directory is ..\common\login.jspx
so why the app server would be looking at the wrong directory? how should I do to correct it?
Thanks in advance.

File not found error after database migration

Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciated

HI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

File not found error after restore the sitecollection

Hi,
I backed up a MOSS sitecollection using "stsadm -o backup" and then restored the same file in the other machine/server. No problems while creating backup and doing restores . But after restore is successfull and try to open the site ..it is giving me
an error "File not found".Any idea?

Hey Anikota,
That's usually caused by a Master Page url error. Open the site in SPD and then open the default.aspx page. If you see an error regarding the Master Page in the design view then go to the code view and manually correct the Maste Page URL.
I hope that helps!
Tom Molskow SharePoint Architect - If I solved the issue please propose my reply as the answer - Thanks!

File Not found, but music is on iPod

OK, this is strange. I just added some more music to my iPod. But it said that 27 songs hadn't been added. But, they ARE on my iPod, and in my iTunes library and the preferences is pointing in the right direction for the library of all my music. So why do I keep getting file not found?

I think you misunderstood the problem. Music is on my computer in my iTunes folder under the correct file name and when i try to play the file using itunes there is an error message 'original file cannot be found, would you like to locate it?' If you locate the file where it is supposed to be, it will play the song. It seems to just be losing information about where files are stored on my computer randomly. Could this be because my files are stored on an external hdd?

After synching ipod file not found

Similar Messages

Maybe you are looking for