After system re-install Acrobat 8 Prof does not work

I had to install my Windows 7 pc. After this nasty procedure I cannot start Acrobat 8 Prof any more, window turns grey. Serial no. is available and no. of activations are not exceeded. Has anybody any idea what went wrong and how I can make use of Acrobat Prof again?

Have you tried a repair from the Start>Control Panel>Programs & Preferences? If a repair will not do the job, then you my have to reinstall as a last result. If you do that, be sure to deacctivate, uninstall, remove the Acrobat folder if any parts left, run http://labs.adobe.com/downloads/acrobatcleaner.html, reboot, reinstall, and run updates. If a 64-bit system, the updates are an important part. If needed, they can be downloaded from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and installed in order.
During installation, don't forget to be logged in as the administrator and disable anti-virus.

Similar Messages

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

what's creative cloud 6? do you mean cs6?
what version of acrobat pro do you have installed and what are you clicking to start it?

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

After uptade to ios5 my camera does not work

after uptade to ios5 my camera does not work

I have the same issue. I upgraded to ios5 then the camera was frozen and no longer works. I took it into an Apple store and they said I had some hardware damage that look to be consistent with moisture getting in through the headphone jack. I accepted that answer and went on my way since my warranty was over 100 days past and I did not feel like paying $100 for a repair with the 4s upgrade avaible with my account soon. I started to look at some other apps that use the camera, the Facebook photo share in the FB app, the amazon bar code scan, camera+ and they all work. There is definitely some kind of software bug with ios5, based on my experience, that freezes the camera. I would suggest taking it into apple to have it looked at or just using a camera app like camera+ to take pictures.

After Installing Lion, Ical does not work. I cannot print, I cannot add an event, etc. How do I reinstall?

Since installing Lion OS, iCal does not work. I cannot add an event, print calendar, etc. How do i reinstall?

You can use Lion Recovery
Before you do that, go to ~/Library/Preferences
Move the com.apple.iCal.plist file from the Preferences folder to the Trash.
Restart your Mac.
See if you can print or add an event now.

Install acrobatx mavericks does not work

after a clean install of mavericks, the installation of acrobat x from cs6 does not work. Indesign, photoshop and Illustrater where installed.
The error Code:
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: DW006 ... - 0 fatal error(s), 4 error(s) Payload: Acrobat Professional 10.0.0.0 {AC76BA86-1033-F400-7760-000000000005}ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat X Pro Installer.pkg failed with exit code: 1 Payload: Acrobat X Pro 10.0.0.0 {E1C48031-9366-427F-AC04-535CEDAAD995} ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer AcrobatUpd1011.pkg failed with exit code: 1
can someone help my?

I was tryin the things on this Lnk, they did not help.
I did an deinstalation of the creative suit cs6.
When reinstalling again, it did not install acrobat x.
The Log file was pointing to a P7 file, which could not be created.
The last lines of the log file:
1/31/2014 17:00:00.298 [INFO] Deployment.ProgressCommand Received Exit message from DE
1/31/2014 17:00:00.309 [INFO] ProvisioningNativeAppletBase Setting EULA for locale - de_DE
1/31/2014 17:00:00.314 [INFO] Deployment.DeploymentFinishCommand Sidecar file /Users/werner/Library/Application Support/Adobe/TrialSettings-Creative_Suite_6_Design_Standard.xml does not exist
1/31/2014 17:00:00.315 [WARN] Deployment.DeploymentFinishCommand Could not process sidecar file
1/31/2014 17:00:00.315 [INFO] Deployment.DeploymentFinishCommand Activation call was not made. DEExitCode:6 ModeIsTrial:false SIFAvailable:true RegisterLater:true UserProfile:true SupressActivation:false
It seems to be a problem of activation, but for the rest of the creative suite (ps, id, il) everything was ok.
any Idea, which can help me? Thanks

ACROBAT XI - DOES NOT WORK WITH WINDOWS VISTA

WHY DOESN'T THE COMPANY STATE ACROBAT XI PRO DOES NOT WORK WITH WINDOWS VISTA.
THE COMPANY NEEDS TO WARN PEOPLE. THE ACROBAT TECH SUPPORT FINALLY FIGURED OUT THAT IT'S NOT COMPATIBLE WITH WINDOWS VISTA.

The Acrobat website and the box lists the compatible OSs. You want Adobe to list all of the incompatible OSs---going back how far.
Acrobat XI Pro system requirements
These system requirements are for Adobe® Acrobat® XI Pro software, v11.0. Because system requirements change with each software update, refer to the Release Notes for your software version for the latest information on supported operating systems and browsers.
Windows
1.3GHz or faster processor
Microsoft® Windows® XP with Service Pack 3 for 32 bit or Service Pack 2 for 64 bit; Windows Server® 2003 R2 (32 bit and 64 bit); Windows Server 2008 or 2008 R2 (32 bit and 64 bit); Windows 7 (32 bit and 64 bit); or Windows 8 (32 bit and 64 bit)
512MB of RAM (1GB recommended)
1.85GB of available hard-disk space
1024x768 screen resolution
DVD-ROM drive
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; or Chrome
Video hardware acceleration (optional)
Note: For 64-bit versions of Windows Server 2003 R2 and Windows XP (with Service Pack 2), Microsoft Update KB930627 is required.

I have adobe reader installed but it does not work

I have adobe reader installed but it does not work

What is your operating system? Reader version?
What does "not work" mean?

Help!! after I upgrade os vga card does not work with my ipad2...

I use ipad2 my class presentations. VGA cable was fascinating to show most of ipad screens, but after I upgraded os it does not working any more.... os bugs? Please give me advices.... I need to use it this week!
Dan

As of Firefox 4.0 and newer one needs at least OSX 10.5+ and Intel hardware.
The latest you can use on your Intel with OSX 10.4.11 is Firefox 3.6.25 (released recently) which can be found at http://www.mozilla.org/en-US/firefox/all-older.html
If you were to update to say OSX 10.5.8 then you can use Firefox 9.0.1

Lync 2013 - Silent install via .msp does not work

The thread listed below is marked as "answered" and indeed the answer given is correct and should work. . . but recently it seems to have stopped working for many.
(EDIT: Site will not allow me to post the link I was planning to post, "until it verifies my account." So, I can only refer you to the thread named "Lync 2013 Client - Silent Installation")
Specifically, it should be possible to do a silent install of Lync 2013 by following the instructions given in the link above to use setup.exe /admin and create an .msp to put in the "updates" folder for the silent install.
The problem is, recently (September 2014-ish) this appears to have stopped working. The thread quoted above has several people replying, all during September 2014, that this method does not work. I am among them. Lync 2013 runs through
the setup, but only Office Tools ever appears as installed in the Start menu. However, if you go to Control Panel, Uninstall Programs, and look for Lync 2013, it is listed there. You can then tell it to "repair" the Lync installation,
and it reinstalls properly. This, of course, defeats the whole purpose of trying to do a silent install, however.
Since it appears that the .msp silent install method used to work, but now does not -- what changed? And what kind of workaround can be used?

Hi,
Did the Lync Package to be the latest version from Microsoft Website?
As the issue have been met by several users, you can feedback the issue on the link below:
http://blogs.technet.com/b/lync/archive/2012/11/01/lync-app-feedback-you-asked-and-here-it-is.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

After I downloaded firefox 4 it does not work properly.before was great now it stalks like a tiny hickup

video films do not play properly
i have to update ff4 and it does not work because it cannot contact the server

I use now firefox 4
before with the older version I had no problems .
I tried to download 4 again but it does not help I only have on my desktop the big firefox icoon and I cannot get rid of it

After pairing in Bootcamp, magic trackpad does not work

after pairing in Bootcamp, magic trackpad a) does not control cursor and b) does not persist after closing Bluetooth devides dialog.
Summary of Problem:
Magic Trackpad is found and paired, but does not control the mouse.
When you shut the Bluetooth devices and reopen (or reboot and reopen), the device is not listed.
Detials of problem:
Bootcamp 3.1 (i cannot find a later one) Windows XP all updates, All Apple Software Updates (to bootcamp and mac os x) installed, Magic Trackpad driver download and installed.
Control Panel, Bluetooth Devices, Add - it detectes the magic track pad (ie track pad blinking, click add) everytime
- It asks about a pass code, I have tried it without a pass code and with automatically Generate Passcode; does this setting matter?
In bluetooth devides, the track pad shows with "Auto Generated passkey" when that is the option selected
Found new hardware comes up, Apple Wireless Trackpad, everything looks fine.
- In Bluetooth Devices, it shows the trackpad wiht "no passkey", even when I told it to automatically generate one.
The track pad does not control the cursor.
Close Bluetooth Devices and reopen it, or reboot and reopen Bluetooth devices, and the track pad is gone.
Rebooting does not change the outcome of above.
I have gone to device manager and tried to update the two (apple & microsoft) Bluetooth drivers with the update button, it says I have the most current.
I do not see how to tell if the Magic Trackpad driver is installed, so I tried installing it again. It does appear to be listed under HID in device manager.
I have done a lot of googling, wasted a lot of time, if I cannot get it to work, I will return it to the apple store.
Any ideas?
Thanks!
bob

Bob, cannot help directly but I am having a similar problem on my MacBook Pro with Windows 7 Pro. Pretty much the same symptoms except my trackpad is not always recognized - it seems I have to click it to get Bluetooth to see it. Windows claims to have seen it OK on one occasion and installed the drivers, asked for a reboot etc. but the TrackPad still does not respond.
Works OK on the Mac side although it is not recognized as a separate Bluetooth trackpad which can be configured differently from the built-in. I wonder if this might be a clue?
I have installed the patch and tried a bunch of other things. Seems like Apple has some work to do sorting out the bugs on both the Mac and Windows side with this device. Pity because its an excellent piece of kit otherwise!

Flash Player has downloaded/installed, but still does not work

This is a relatively new problem for my computer, but from what i have read, is a common problem so I know it is not my computer. Out of the blue, click on a video and all i see is a black screen. No adobe logo saying i needed to update or download in order to watch video. So i unistalled, rebooted and reinstalled..nothing. I uninstalled/installed with zip..nothing. Everything that is enabled is enabled..nothing. Reset IE...nothing. Downloaded Mozilla..nothing. I am currently running windows xp, IE 8 (32 bit) and all security software are disabled. The crazy part is that when i check the file for flash player, it does not show any bites in file. I know there should be bites in there because i checked on a computer with working flash player and it shows 6.00 mb. So somewhere from the installation, the file is lost. i have tried pretty much all suggestions, dating back from '09 and really really need some advice.

ok..flash player x is listed. always has been. i don't understand the whole "no files" bit cuz the computer that i am using show 6.00mb in files. unless it is outdated? this computer is brand new, custom made as of last month to my specs, so i can't see how adobe would be outdated. Mozilla shows in my add/remove files, but that flash player plugin is nowhere to be found. in fact, this is all the adobe files i see in order:
Adobe AIR
Adobe Download Manager
Adobe Flash Player10 Active X
Adobe Flash Reader X
Adobe Shockwave Player 11.5
i am really not liking mozilla, however...upon clicking a video, it is telling me i need to update to newer version of adobe. When i click on dl, it gives me a window to save as a binary file. it will not download and all security/firewall are off. Shockwave has always been enabled. pretty much anything you posted to do in past threads..i have done. its driving me crazy
i can bring up other websites, just cannot watch videos and was stuck on that redirect to adobe forum..will try the forum again.

Adobe acrobat professional does not work?

I am having problems with my adobe acrobat when I try to open it I get "your application has unexpectedly quit."
I have tried to reinstall.
I have reinstalled in safe mode.
And alot of other steps listed on the adobe website and with tech. support on the phone.
Is there any why it would not work after all this?
mac mini Mac OS X (10.4.7)

Which version Acrobat are you trying to use?

After system re-install Acrobat 8 Prof does not work

Similar Messages

Maybe you are looking for