After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

I have had Lion for a 2, 3 months on the iMac 27 inch purchased last October (2011). Last night I chose to update the system, and deselected iMoves update because it was 1GB, and chose only 4 updates, including iTunes, Safari (i think)... But the update says error, and ask to restart the system (it won't restart itself, so I waited 30 minutes, and then pressed the Power button for 10 seconds, to let it power down, and press Power again to power it up).
However, after that, the system failed to boot up, showing a
panic(cpu 0 caller .....)" "Unable to finder driver for this platform: \"ACPI\". ... xnu-1699.26.8/iokit/Kernel/IOPlatformExpert.cpp:1504
This is not typical of the upgrade process. So I searched the Internet forIOPlatformExpert.cpp:1504 and some people said it is a hard drive error, but then I powered down and pressed Options when booting up, and was able to boot to Windows 7 (bootcamp)... and was able to boot to the "Recovery", which let me choose
Restore from Time Machine Backup
Reinstall Mac OS X
Get Help Online
Disk Utility
what should I do now to fix it so that it can boot again?

This error is caused by one of the updates you applied, namely the Thunderbolt Software Update 1.2. Many people have been affected by it, including me. I did what Linc Davis has suggested above to fix it. The most extensive discussion about the problem, with ways to fix the problem, is here:
https://discussions.apple.com/thread/4020399?start=0&tstart=0

Similar Messages

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine,

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine, I've had this phone for 8 months with no problems until last night , AT&T not any help,apple wants $ I thing it's a software problem.. Any one had this issue?

- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running". Windows 7.

After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run. itunes will not now run.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

System will not boot with Seagate 3Tb expansion drive plugged in.

I have a HP Pavilion HPE h8- 1214 Desktop , I recieved a Seagate 3TB expasion drive as a gift but when plugged in, the system will not boot. It turns on but thats it. It never gets to the boot sequence. I have it plugged into the top 3.0 usb slot and have tried all of the other slots as well with no sucess. But if I leave it unplugged the system boots right up. I can then plug it in and it works fine. I have plugged it into my wifes HP All- In- One and it boots fine and works. I have a WD 2TB drive that works fine as well on my system . I have searched Segates support for hours and all they say is to change the boot sequence. Have tried that, no go. What they dont get is no matter what I do if that drive is plugged in it never gets as far as booting and reading the boot sequence. Please help. Thank you!

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

After update last night my firefox will not open did restore it still does not work?

not an extension the update from last night

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
You can try to reset the preferences if that didn't work.
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.com/kb/Firefox+crashes
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HP G62 Will Not Boot With Power Cord Plugged In

I have an HP G62 laptop that is about four years old. I've had a couple of problems with it before that were resolved relatively satisfactorily, however five or six months ago I started having a new issue. The laptop will not boot with the charging cord plugged in, whether there is a battery in it or not. Nor will it return from sleep mode (screen black, status light on the power button flashing) with the charging cord plugged in, whether there is a battery in it or not. It simply shuts down and I end up with an error screen the next time I boot up. I have tried other charging cords and it has been the same, however the cord will still charge the battery. This means I have to charge the battery, unplug the cord, boot up the computer. This annoyance is worsened by the fact that the battery is old and unable to hold charge for very long at all and I fear one day even the battery won't be enough to boot the computer.Can I fix the power cord issue? Should I buy a new battery? Or let my computer give up the ghost and scrounge for a new one? Any help would be greatly appreciated.

the charger input could possibly need replaced and/or the charger

After I updated to yosemite my iMovie will not open. I have found the folders in the applications for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

After I updated to yosemite my iMovie will not open. I have found the folders in the applications folder for both versions 9 and 10 but neither one opens when I double click on the icon. How do I remedy this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

After firefox update last night to 36.0.4, it is not starting?

After firefox update last night to 36.0.4. I cannot open Firefox. It says Firefox is already running, but is not responding. The old Firefox process must be closed to open.
I try to close it under task manager, it is not listed under process but under details - Cannot end task, as it says access is denied.
I try to look for help on the net. It says to delete the file PARENT.LOCK, It says action cannot be complete as the file is open in Firefox.
I try to shut down my computer, even log out on my current user but cannot delete the file Parent.lock.
I am using a win 8.0
The easiest way is to uninstall and to install a fresh application, but will this wipe out all my bookmarks etc....
Thanks,
Coco

Hi Coco,
Thank you for your question, since the parent.lock file cannot be removed it is possible to create a new profile:
*[[Use the Profile Manager to create and remove Firefox profiles]]

The system will not boot

Hello, I am trying to install windovws after the restart can not install Yosemite because can`t please format the hard disk.Please help because just yesterday bought macbooc

FYI...the top partition is too full. You need free space. You will need to remove the bottom partition then make the top partition larger. Make sure you have 10% or more free space. If you use Parallels or VMware you don't have to partition your drive. If you use the vm software you can run Windows wihtout having to reboot into bootcamp each time you want to use it.
See this link for help after you resize your top partition.
https://www.apple.com/support/bootcamp/
I forgot to ask...
If the system will not boot, how are you seeing Disk Utility. Are you booted from the Recovery Drive? If yes, then you will need to erase the internal drive and reinstall Yosemite on the internal. When you erase, make it one partition. You can add a second partition later that's smaller.
Note: you posted in the OS X 7 Lion instead of the Yosemite forum. In the future, asking on the correct forum gets the best answers.
Parallels http://www.parallels.com/
VMware Fusion http://www.vmware.com/products/fusion/

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.

Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck.

After installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded

after installing updated firefox,my speed dial will not open when I close the current tab which it did before I upgraded. How do I fix this problem? Thank You, Mike Chidester

is it up to date
Speed Dial :: Add-ons for Firefox
"Works with:
Mobile 0.7 - 1.0.*
SeaMonkey 2.0 - 2.5a1
Firefox 2.0 - 8.0a1"
https://addons.mozilla.org/firefox/addon/speed-dial/#detail-relnotes

Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w...
Hi,
just recently upgraded to Win Pro on my HP PAVILION A6109N. I also bought a toshiba canvio desk 3TB. What I notice is that if I reboot my pc with the extermnal HDD connected, my system will not boot.
I have check my BIOS boot settings and the order of the boot.
I have tried disabling USB Legacy Support in the BIOS
I have reformatted the external HDD
but still my desktop will not boot if the external HDD is connected....If I disconnect the external HDD...the system will boot up ....
I am at a loss....*** scratching my head ***

Update: The only solution for me was to format the drive as ext3 and plug it into one of my Asus RT-N66U USB ports, as most routers don’t yet recognize 3TB drives as NTFS. It’s not much help to people who don’t have a router with this capability, and it also slows transfer rates to ~12MB/s.
Given the short length of the cable, your only other options are to have the 3TB Canvio sitting right next to you so you can unplug from a front USB port before each boot, or place it towards the rear of your desk and crawl under the desk to disconnect it from your PC prior to each boot.
It's a pity because Toshiba produce great internal HDD's, but my experience when it comes to external drives is they're simply junk. I wish I had read the reviews before purchasing.

Operating reference system will not boot.

hi! bought the iphone 4s in Italy and it does not work. Operating reference system will not boot. Change of firmware and restore did not help. How can I change it while in Russia. Can I send in the mail store??

Hi NcBunky,
Are you using Win 7 64 bit? Did you update the Texas Instruments (TI) USB 3.0 XHCI Host Controller?
I have an H8 1380t PC. Updated the TI USB 3.0 driver and had the same problem.
When booting the PC with the USB 3.0 external drive connected to the PC the PC would not boot. When booting the PC with only the mouse, keyboard, and a USB 2.0 external drive attached the PC would boot. Once booted you could attach the USB 3.0 drive and it worked fine.
Solution was to roll back (reinstall) the TI USB 3.0 XHCI Host Controller to the original factory installed driver.
System now boots with the external USB 3.0 drive attached.
Jaco
****I am not an HP employee****
Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
+++++++++++++++++++++++++++++++++++++++++++++++++++++
H8 1380t CTO, Intel i7 3820
16 GB DDR3
Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
Envy Phoenix 810-150se, Intel i7 4820k
16 GB DDR3
Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
HP 560z CTO AMD Phenom II X6 1090T
16 GB DDR3.
Radeon HD 6570
Win 7 Home Premium upgraded to Win 7 Pro.
HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
12 GB DDR3
Nvidia Graphics
Win 8 Pro
Errare humanum est.

System will not boot up

MB: KT6 Delta-LSR
CPU: XP2500 Barton
GFX: Asus V9520 Magic/T 128mb
RAM: 1028 pc3200 ddr400 (2x512) Geil Branded
HDD: Maxtor 40GB 2mb Buffer
Put it all together formatted the HDD, installed windows, network was working perfectly. (on ASUS via600 board)
Next day turn it on and nothing, zilch not even a flashing cursor top left of screen, dont even boot to DOS. screen is completely blank.
Tested CPU, GFX, RAM and PSU in another base unit and they work fine, yet put them all together and nothing.
1st I thought it was the mainboard so I sent the ASUS board back and ordered the KT6 Delta nice looking board. But still exactly the same problem.
Lights on case are lit all fans are turning ect yet still the system will not boot up i dont even get a flashing cursor top right of my screen.
There is no light with this mainboard for some reason.
All components work when fitted to another mainboard in a different case.
NB: one thing I have noticed is that there are two power sockets on this board,
1. The usual 20 pin socket (which I am connected to)
2. A 4 pin socket near to the CPU (whilst my PSU has a plug that will fit this sockect also, I am unsure as to connect instead of/as well as or leave unplugged.

Like I have stated before, it is the compatibility issue related towards your chip fsb and your memory fsb. I know that not everyone has money to go buy another stick of memory, I don't. But maybe you could exchange from the place you bought and say that it was a mistake? The cheapest route without getting the fsb chip to match the fsb of the memory stick is to get PC2700 memory. Have you tried going for this yet? I'm sure that your motherboard may not be shot, my board didn't get shot after trying to the two different fsb. You have to understand, motherboards are picky when it comes to running the hardware. If there is a conflict, it won't run right, I could run at a lower fsb and get it to work fine, but it wasn't at it's full potential, and I wasn't going to waste my time trying to find the fsb that would work correctly. So, I just let my friend have the stick back. This is why I'm asking you to try a lower speed stick of memory, because I have experienced this. But so far you haven't even seemed to notice my replies, could you take a quick overview of what I have said? Sorry if I come off as rude, just I am taking the time to write these replies and really am trying to help from my knowledge base. I have experienced this type of problem of what you are talking about personally.
Ok, so maybe I might not know it all, seeing that other people replying here have the same mb spec and chip fsb and memory like your trying to run, they might know more when it comes to that area for sure, just I didn't have luck trying to run a faster stick of memory compared to my chip, even though my board could run it, I couldn't get it to work, at all. I would just get a black screen, I thought I shot my GPU. Then I reset CMOS and the bios would flash, then when it would start pulling from harddrive, boom, black screen again. I had my friend tinker with my volt. to the right volts of the memory stick, still couldn't get nothing. This is why I am a little skeptical about you being able to run it at all in the long run. Hopefully you can find a way, maybe it is your manufacturer of your stick, but my conclusion is, if it isn't going to work with one, or two of same speed, try lowering it. Like I said, I tried it on this setup right now, and I didn't have to replace the chip or mobo, or gpu, so those should be fine.

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating sys

I interrupted a software update and my macbook pro will not boot. I have tried to reboot using the startup disc, I have tried to verify the disc, and repair the disc. It tells me I need to erase and reformat the hard drive then reinstall the operating system. I do not have a back up of all my applications, my garageband music and other things. I also do not have time capsule set up on this machine, but I do have a 2 TB time capsule.
Is there anyway to back up this corrupted drive so I can restore my applications later?

There's an old saying. If you don't have a backup disc, then there must be nothing important to backup. That's just lesson #1. Lesson #2 is to never interrupt a software update. Not a good thing.
OK, I'm sure you know this. It just upsets me to read your story, knowing you have a lot of important stuff on your hard drive, and didn't use time machine.
You're pretty much in a bad place. My only hope for you is to boot to your Installation Disc, then using disk utility see if you can save the internal hard drive (by fixing what can be fixed). You might be able to see your user folder and some of your apps. I wouldn't even consider copying the library, because who knows what's been corrupted in there.
Good luck.

After System Update last night, the system will not boot with IOPlatformExpert.cpp:1504 error

Similar Messages

Maybe you are looking for