After taking some pictures with my iphone, I downloaded them to my computer.  Well when I began using the phone again I realized it had uploaded all my photos to the iphone.  I don't want that and didn't expect it.  It just did it. I want them off!

I have gone to my ATT and store for help but it's not "synching in to my head" on how to do it.  Which means I consider this a bit to complicated.  So how do I manage what goes on and off my phone.  It seems that somewhere it should ask before it does it.  Anyway in a step by step process how do I get the pictures off my iphone. 
thanks
Dennis

You sync material to your Phone via iTunes.
Regards
TD

Similar Messages

  • After taking a pix with my iPhone, it shows up in my Album.  But when I select it to look at it or forward it, it disappears and the screen is blank.  How do I fix this?

    After taking a pix with my iPhone, it shows up in my Album.  But when I select it to look at it or forward it, it disappears and the screen is blank.  This doesn't happen with all of my pictures.  I have the camera set on photo, with HDR off.  How do I keep this from happening?

    Not sure if this helps you, but I had the same issue. I inadvertently must have chosen a filter instead of none. Once I went and fixed this, my pictures were in my roll and I could see them. Hope this helps. I think you should be able to pick a filter and take a picture, but it worked for my phone.

  • After taking 5 pictures with the 4S, the phone shuts down and restarts - all apps have been closed and software updated

    We use the iPhone's at my job and they all have the 4S - one of the guys is having a problem when taking pictures.  After taking 5 pictures the phone completely shuts down and re-starts.  He has made sure that all apps are closed out, updated the software to the current one and that the battery is fully charged.  Can't seem to figure out what the problem is.  Anyone???

    We use the iPhone's at my job and they all have the 4S - one of the guys is having a problem when taking pictures.  After taking 5 pictures the phone completely shuts down and re-starts.  He has made sure that all apps are closed out, updated the software to the current one and that the battery is fully charged.  Can't seem to figure out what the problem is.  Anyone???

  • Lumia 925 restarts after taking a picture with Nok...

    Hey guys,
    so here is my problem: after I updated to the Lumia Black Update, the phone restarts every time take a picture using the smart camera. I checked that every app is up to date, any ideas what can I do?

    How are you trying to send the photo?
    iMessage?
    In an email?
    Via AirDrop?
    or some other method?

  • I have an iPad 3 (that I bought when it first came out), and at the moment I'm trying to sync it with my iTunes music on my computer but when I click on the iPad, it is coming up that it's a new one?

    Both my computer and iPad are connected to the same account on iTunes so that can't be the problem. Before plugging it into there, I synced it in with iCloud just to make sure I don't lose anything by mistake. Can I get some help please?

    I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
    Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
    No answers here, but you are definitely not alone with this issue.

  • I was told by Borders customer service that I have to add them as a "trusted site" to avoid an error message when sttempting to use the shopping cart. Is this true, and how do I do it?

    When I go to "checkout" on Borders.com, I get an error message. The message is as follows:
    [ServletException in:/ConsumerDirectStorefrontAssetStore/ShoppingArea/ShopcartSection/body.jsp] null'
    I have tried refreshing, clearing cookies, and everything I can think of. Customer service told me it had to do with security settings, and that I had to add it to my trusted sites. I have never had to do this before, so I'm jsut wondering if this was true, and how to do it.

    Are they multi-function units? Do they include a scanner? Most people call these multi-function copiers, not printers. Printers don't have a scanner in them.
    Give us some specifics as to the brands and models you have tried.

  • Using ATV2/3 with non-HDMI Receiver and theater projector and also need iTunes downloaded movies to work.   I'm thinking to use the Toslink digital out for surround sound and an HDMI to RGB converter for video but not sure the iTunes DRM will prevent?

    I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
    I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
    This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
    Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
    Thanks

    I have a theater with a Runco projector but non HDMI. alas, my receiver is non HDMI. Changing electronics and projector is a non-starter.
    I would like to be able to buy HD movies on iTunes and watch them by streaming via Apple TV3. My plan is to capture surround sound from the TosLink digital out, which my preamp/receiver can handle. For the video, I need to convert the HDMI to RGB component to feed my receiver.
    This is where iTunes DRM and HDCP issues might arise. I am under the impression that I need an non-HDMI compliant converter so that ATV3 can even talk to my receiver. It is my understanding that this is possible and takes care of the HDCP issue. But what about the DRM issue? All I want to do is buy and watch HD movies, no bad intentions. I find it incredible that iit might not be possible.
    Anyways, is there a 100% certain approach even if it costs up to $300-400. Again, changing hardware is a non-starter so please avoid the obvious "buy an HDMI amp and projector".
    Thanks

  • I recently received an email stating that someone from Morocco had downloaded an app on a different computer. When I clicked on the link supposedly to change my ID and password. I noticed it asked for all of my info. Is this a scam?

    Dear Itunes customer,
    Your Apple ID, was just used to download Flap Flap from the Mac App Store on a computer or device that had not previously been associated with that Apple ID.
    This download was initiated from Morocco.
    If you initiated this download, you can disregard this email. It was only sent to alert you in case you did not initiate the download yourself.
    If you did not initiate this download, we recommend that you go to http://tinyurl.com/mrx4a2y , to change your password, then see Apple ID: Tips for protecting the security of your account for further assistance.
    Regards,
    Itunes

    Yes, it's a phishing scam to get your account and payment details - if you still have the email then you could forward it to Apple : [email protected]
    Did you fill any details in on the page ? If you entered your password then you should change it immediately e.g by logging into it by tapping on your id in Settings > iTunes & App Store on your iPad, via the Store > View Account menu option on your computer's iTunes, or via http://appleid.apple.com

  • I have an iPhone4s,and it gets heated when i use it,(when I start using the internet)?why does this happen and what is the solution to this.Please Help.

    I had bought an iPhone 4S just few days back.And I have noticed that the phone gets quite hot while i am using internet.Can u guys tell me why this happens and what is the solution to this.

    Hi, I take it its not just a bit warm?

  • When I take photos with my iPad they also go on my iPhone but when I take photos with my iPhone they don't show up on my iPad. What's that all about?

    When I take pictures with my iPad they go to my iPhone but when I take pictures with my iPhone they don't go to my iPad. How can I get the pictures I take with my iPhone to my iPad?

    Check the following:
    From your Home screen, tap Settings > iCloud > Photo Stream, and make sure the slider is set to the ON position.
    From the Home screen, tap Settings > Wi-Fi, make sure the slider is set to ON, and that your device is connected to a wireless network.
    Ensure that Camera app is closed on the device where you took the photo. Photo Stream will not upload photos from an iOS device until the Camera app is closed.
    Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.

  • I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

    I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
    Thanks for your help.
    George Kyaw
    <Email Edited by Host>

  • TS1363 I have windows 8  and itunes 11.1 ... it identifies my iphone 4 but insists that I either update my phone to OS 7 or restore to by basic 6.1.3 OS  I don't want to do either.  How can I get  itunes to access my iphone ?

    I have windows 8  and itunes 11.1 ... my laptop identifies my iphone 4 but  itunes insists that I either update my phone to OS 7 or restore to by basic 6.1.3 OS  I don't want to do either.  How can I get  itunes to access my iphone ?

    RealPlayer can cause conflicts with Flash Player because it tries to assign EVERY TYPE of video or audio file to itself by default. I haven't used RealPlayer in years for that reason. It's an unnecessary program anymore. There are apps loike VLC media player that cna do EVERYTHING it does without conflicting with other apps like Flash Player.
    With WIndows 8, Microsoft began embedding FlashPlayer themselves into Internet Explorer. Because of that, you cannot download and install it from here. You cannot uninstall it from Internet Explorer without removing a specific Windows Update first. And you cannot update it via this website. ONLY through Windows Update can Flash Player for Internet Explorer be updated.
    That said, you probably DON'T have a virus that's causing the problems with Flash Player and Internet Explorer. Many, many websites are not "recognizing" the browser.
    This is a known problem with Internet Explorer 11, which Microsoft has been aware of since October 18 when they released IE11 The pages can't recognize the browser, so they don't recognize any of the plugins, like Flash Player.
    So far, Microsoft has made NO indication that they have any plan to fix it soon.
    Microsoft's recommendation is to use Compatibility View for affected pages, and "pretend" you're using an different browser. Trouble with that is it has seen limited success at best, and you have to individually enable it for EVERY page that has problems.
    I'm not big on "pretending" so I recommend actually using another browser.
    Firefox (from Mozilla)
    Opera (from Opera)
    Safari (from Apple)
    Chrome (from Google)
    ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

  • What to do with between Set up as new iphone or Restore from this back up? i just want to transfer all my purchased apps and contacts to my new iphone?  don't want to screw thing up. thanks

    I plugged in the iphone 5 to PC via itunes what should i do  between Set up as new iphone or Restore from this back up? i just want to transfer all my purchased apps and contacts to my new iphone?  don't want to screw thing up. Please help..... thanks

    Is this a new iPhone?
    If so, when connecting a new iPhone to iTunes for the first time that has been used to sync with another iPhone or iOS device, you are prompted to transfer the backup for the other iPhone or iOS device to the new iPhone, or set up the new iPhone as a new iPhone.
    If you don't want to transfer the backup for the other iPhone or iOS device, select set up as a new iPhone. No existing data or settings will be erased or changed when selecting as a new iPhone. Not that difficult or difficult at all.

  • My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.

    My iphone 4 drop down after that it start showing apple logo i have restored it after that it shows searching on carrier signal and shows that Connect to itune... when i connect it to itune, message came that there is some problem with your iphone.Please help me out.

    Hi ahsanikram!
    I have an article here for you that can help you troubleshoot this issue with your iPhone:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/ts1275
    If you are still having issues after attempting the troubleshooting steps in the previous article, see the following article:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • Some pictures on my iphone 4s are not uploaded to Icloud and Photostream and stay in the camera roll

    After taking pictures with my IPhone 4S the pictures are not uploaded from the camera roll to ICloud and my Ipad.  The pictures do not show up in the the IPhone Photostream after taken.  Any solutions?

    Hello,
    I have experienced a similar issue.
    Normally all photos from iPhone or iPad correctly push to photostream and it works.
    But on a recent travel the photostream pushing seemed "spotty" and some random pictures taken with iPhone were/are  not pushed to photostream. On the destination there was a (slow) wifi connection, might have something to do with it - but even after getting home to my faster wifi connection the remaining photos in my camera roll are still not pushed to photostream from the iPhone.
    The missing photos not being pushed from the iPhone to photostream are random in timeline ("spotty" pushing).
    Any ideas on why this happens?
    I guess after connecting the iPhone to my Mac the entire camera roll will load into iPhoto, and iPhoto on Mac will do the remaining "pushing" to photostream; will have to wait and see.
    But this issue purely is about incomplete pushing from iPhone camera roll to photostream.

Maybe you are looking for

  • Problem with Editing a Table

    Hi All,      I am working with normal tables with one column as editable using inputfield in the context binding for that field..When i update one field of  that column depending on the lead selection all the records of the table corresponding to fie

  • I lost my pictures and didn't back them up how can i get them back

    So when i was trying to put my pictures on my hard drive i was very nervous because they were very important so i put another copy of them inside again (i had to copies in the hard drive). Then a question popped up and it said did i want to replace i

  • SCCM console launch fails , SQL connectivity issue with SCCM machine account

    Hi , As part of resolving the corrupt SCCM 2012 R2 environment, we have uninstalled the site from the Standalone primary site and restored it from the last backup. The database is on remote server on SQL 2012 SP1. Only Site recovery is run. Post the

  • New Maintenance Wizard released for Upgrades to R12!

    Maintenance Wizard Version 2.01 was released on 31-MAY-2007! <BR><BR> This new version includes the path to Upgrade to Release 12 and many new or enhanced features. It is a FREE tool for all customers with valid support contracts! <BR><BR> For more i

  • Loop #  of times, stop at specific frame

    Hi there, I'm having trouble finding the answer to a simple (I hope) question. I made a flash banner and have successfully added an action that will loop it 3 times, stopping on the last frame. Here is the code I entered in a separate action layer: I