After TECO material postings are allowed

Dear experts,
Project been TECOed by user status. After TECO it is allowing to do the postings.
I have checked staus profile which has created against user status TECO for below business transaction Forbiddon is ticked.
FI: Postings, FI: Statistical postings,Goods Movement,Goods receipt for purch. order,Material purchase order,Material purchase requisition,Revoke technical completion
Please suggest
Regards

Dear Muzamil,
How to restrict Delivery cost posting after TECO. Is it possible?
If it is possible what way we can restrict the Delivery cost posting.
Thanks

Similar Messages

Only asset postings are allowed in this account

Hi All,
My client upgraded SAP System from 4.6 to 6.0. While testing the depreciation run in AFAB, it is showing the error as "Only asset postings are allowed in this account". We have checked all the settings relating to GL Accounts for Depreciation and Accumulated Depereciation. All are correct, like Depreciation account is a P&L Acccount and Accumulated depreciation account is a Balance sheet Asset reconciliation account. Checked the account assignement in AO90 as well. They are also correct.
The deprecaition was posted up to 2nd period and now we are simulating for 3rd period for which the error is showing, We did not change any configuration setting or the master data.
Is anybody having any idea why such error is showing ? Kindly let us know
Thanks
shankar

Hi,
The user has written a Validation for authorisation to run the depreciation with out proper message. The problem was solved when we run the depreciation with another user. Thanks all .
Regards
shankar

Stop return of unused material after TECO

Hi All,
Can anyone tell me how to restrict return of unused material after TECO???
Thanks in advance...

Hi,
I think it is possible. Create a specific user status that will be activated by setting system status TECO. Also create a specific status profile if necessary containg the user status and link it to the proper order type. For the user status you can disallow business transaction "goods movement". Beware: all goods movement transactions are blocked!
Regards,
Paul

After TECO system not allow any transaction for orders

Dear all,
We have taken TECO for Production / Process orders but system is allowing to cancel confirmation / to cancel GRN / to cancel operations.
Actually we dont want to cancel any of the above said after TECO.
How to restrict this one. Explain very clearly if it is possible.
Thanks,
Regards,
Sakthivel.S

Hi sakthi vel
You should go to transaction BS22, then click on status I0045
After that change RMRU, RMWA and RMWF from Allowed to Forbidd.
The problem will be solved.
Regards
Dinh Trung Tin

After delivery what postings will be happen and PGI also?

Hi All
after delivery what postings will be happen and PGI also?
thanking you
Sarvesh

Hi,
When you create the delivery, the open order quantity is reduced and the status of line item gets updated as either partial, complete. The document flow is updated with corresponding delivery.
When you post goods issue for an outbound delivery, the following functions are carried out on the basis of the goods issue document:
Warehouse stock of the material is reduced by the delivery quantity
Value changes are posted to the balance sheet account in inventory accounting
Requirements are reduced by the delivery quantity
The serial number status is updated
Goods issue posting is automatically recorded in the document flow
Stock determination is executed for the vendor's consignment stock
A worklist for the proof of delivery is generated
After goods issue is posted for an outbound delivery, the scope for changing the delivery document becomes very limited. This prevents there being any discrepancies between the goods issue document and the outbound delivery.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

Inform to Materials Dept after Teco for open Materials

DEAR All
When any SAP-PM Work orders are closed or TECO done then Work-Flow email shall be triggered and list of u201COpen Componentsu201D of material number, Short Description, Qty, UOM shall be emailed to Materials Planning. It is recommended that components list shall be emailed to concerned as per MRP controller maintained in Material Master.
How to map in configuration
When order gets teco open reservations are deleted please let me any any wayout
Regards
chan

Dear,
Once after doing technical confirmation, system shows that "document does not contain items"
But even if u closed the maint.order after MRP runs, that particular purchase requisition will no more visible in system.
Regards,
Pardh reddy.c

Confirmation after Teco ?

Hi all ,
1) If we TECO any production order , till then we are able to do Confirmation for the same Production order.
What is the Idea behind allowing confirmation / goods movement even after TECO .
2) Can we settle the production order without doing TECO to the same ?
Regards
Edited by: venky shree on Feb 22, 2008 10:40 AM

Hi Krishna,
You can do that in BS22 tcode
Select SysID I0045 TECO,doube click
then select RMRU Confirm order- set Forbidden
Hope this helps
Rgds,
SVP
@ Krishna
If you have any queries then request you to post as a new thread rather than posting the query in others thread
Edited by: SVP on Jul 1, 2008 1:38 PM

Open TRs not getting deleted after TECO production order

Hi,
We're having an issue. We're using WMPP interface to supply the production line for the production orders. The auto TRs are generated when the production orders are released.
After TECO the production orders, the open TRs are not getting deleted automatically.
Could anyone know if these TRs get deleted automatically when we do the TECO production order?
If yes, do we have any restriction or condition based on this, the TRs get deleted?
Please explain.
Thank you.
with regards,
Muthu.

Hi Abhijit,
Thank you for your reply. It does not help me.
The auto TR creation is happening now as required. No issue on this.
When you do the TECO, it also cancels the TRs. I tested this also.
There're some scenario this open TRs cancellation is not happening. I do not know when these open TRs are not cancelled. If you know answer for this, please let me know.
Thank you for your help and time.
with regards,
Muthu.

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

User exit for MIGO after the material document is created?

hi guys ,
I have requirement like after the material document was creted in migo i need to call my new transcation. can any one please let me know how i have to solve this ?
Moderator Message: Unfortunately, this is not a training forum and we can teach all about Exits and Badi's. I suggest you take a classroom course..... or do some R&D first
Edited by: kishan P on Nov 30, 2010 11:57 AM

Hi
U need to create a FM with UPDATE MODULE attribute checked: so you fm can be run in UPDATE TASK
This fm has to have the same interface of the method of the BAID (or user-exit) or a parte of it, if you don't need to use all parameters of the interface.
All code to schedule the job has to be placed in this fm: you can use the fm JOB_OPEN and JOB_CLOSE in order to scheule a job programmatically.
Call this fm in the BADI, the call has to be in UPDATE TASK, in this way your porgram can start as soon as all updating processes are over
Max

Item Category and MRP type for material is not allowed

Hello all,
I got a Error Message:
Transaction Z113 is not defined (Message no. V1347)
Diagnosis
This combination of item category Z113 and MRP type for material is not allowed.
System response
The system does not allow further processing of this item.
Procedure
Check your entry.
You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
The SD Configuration seems all right, I have:
Sls Doc Type (VOV8) ZA9 (no delivery type assigned)
Item Category (VOV7) Z113
Assigs Sls Doc & Item Ctgry (VOV4) ZA9/ZNOR/blank/blanl/Z113
ZNOR = Std Item-Av. chck Del
ZNOR defined in MM03/Sls Org 2
Define Schedule Line (VOV6) = Z7 (without delivery)
Z7 has FLAG on Prod Allocation
Assign Schedule Line (VOV5) = Z113/ND/Z7
At table: TVEPZ
I have the entry: Z113/ND/Z7
Guys, what would?
Please help me out because I am stuck in this issue.
Thanks a lot,
Barbara

Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
New Rqmts class gets tied to a Rqmts Type
New Rqmts Type gets assigned to rqmts class
Strategy, assign the Rqmts Type to it
Strategy Group, Assign the Strategy to it
MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
It may be something in this area that you need to trace through ?
Bill

License not present. With the trail version only limited replays are allowed... Qtp automation

Hi All.
We are doing QTP automation testing for our flex application. But after running all 30 tests it is showing License not present. with the trail version only limited replays are allowed. We are using flex sdk 3.5 and flash builder 4 plugin for eclipse. we are building our application using ant and we are deploying the application directly and testing it. Can any one tell Steps to resolve this issue...
please step by step required..
Thanks
Ram

You need to have valid premium license for Adobe. Only then it would work.

License not present. With the trial version only limited replays are allowed -- Flex builder 4.5 Premium eclipse plugin with SDK 3.5

Hi ,
We are using Flex SDK 3.5 and using eclipse to build the war in order to make it automation compatible , Right now we tried with Premium version of Flex Builder 4.5 eclipse plugging to build and make application automation capable. But we are facing issues in terms of license , After deploying the automation compatible build we are getting error message "License not present. With the trial version only limited replays are allowed".
Previously we are using Flex Builder 4.0 and everything was working fine .
Is Flex Builder 4.5 doesn't support SDK 3.5 ?
Please help .
Thanks in advance
Thanks and Regards
Sunil Kumar

with trial version (FB basic) you can record/replay only 30
script lines. You need to buy FB pro license to remove this
restriction

List of formulas that are allowed in PLD

Hi,
i am an ABAPer & new to this SAP B1 env.
is there any document/link that gives the list of formulas (along with syntax) that are allowed in PLD ?
actually i have to print "No. of days delayed" (Run Date - Due Date) in Customer Statement letter.
i tried entering the formula as Field_167 - Field_036 but i get only 0 (zero) even though there is diff in dates.
i tried with datediff(DAY, Field_036, Field_167) and got the error : Errors were found in the formula"
what is the exact syntax to calculate elapsed number of days?
to check for a condition also, it seems, we need to have additional UDFs & establish the dependencies to get what we want, instead of having a straight forward "if" OR "case" statement.
working with SAP B1's tools (e.g. PLD) is like doing a surgery with kitchen knife! (sorry, if i have hurted anyone's feelings
if anyone can give a list of formulas (along with exact syntax) that are allowed in PLD it will be of great help to people like me.
Thanks & Regards,
Raghu Iyer

well, i solved my 'Days Overdue' OR 'elapsed days' in a crude way (see my method given below), if anyone has got a better & accurate method, please do share it with the beginners like me.
available values :
Field_167 is the 'Ageing Date' (a text field in Page Header Area)
Field_036 is the 'Due Date' (a text field in Repetitive Area)
requirement :
to print 'Days Overdue' (Field_167 - Field_036 + 1) along with 'Due Date' in repetitive area.
even after browsing through this forum & other some materials provided in SAP Service Market place, i could not find a function/method to get the elapsed number of days between two dates. so, i went about in around about way to arrive at the 'Days Overdue'. given below is my method that gives the elapsed days, though a close one but not accurate, since i took a month as 30 days. otherwise, this seems to work fine, i need to check it out thoroughly.
in the repetitive area:
defined a new hidden field Field_187 as Formula : (Month(Field_167)*30)+Day(Field_167)
defined a new hidden field Field_188 as Formula : (Month(Field_036)*30)+Day(Field_036)
defined a new field Field_189 for 'Days Overdue' as Formula : ((Year(Field_167)-Year(Field_036))*365)(Field_187-Field_188)1
Regards,
Raghu Iyer

Why decimal Places are allowed during goods issue and Goods receipt for mat

Why decimal Places are allowed during goods issue and Goods receipt for material with unit of measure PCS.
MY config allows consumption in decimal places.
How to restrict this?
Prem Nivas

Hi,
Please check in customizing UOM (T code-CUNI).
In dimensions check the decimal point for the unit of measurement.
Regards,
Krishnendu.

After TECO material postings are allowed

Similar Messages

Maybe you are looking for