After that I did the update from my ipod to ios 5, when I connect the USB cable to the computer itunes does not recognize ipod
I have an windows 7 64 bits, and after i did the update from my ipod 4g to ios 5, my itunes(10) don't recognize my ipod.
what can i do?
See the actions for that error number here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
david ffromlemoore wrote:
Dont have an answer for you, but maybe you can assist me. Not to tech savvy but trying to update 4gipad and ipad to ios 5. Keep getting error message 3194? not allowing update, any advice. Both show on list for update capabilities.
Similar Messages
-
i am trying to sync my iphone 4s with itumes when I connect with the cord to my computer itunes does nto recognize it. So I go into settings on my phone and then general and itunes to try and sync wireless and it says Sync will resume when "D3N23RB1 is available how do I fix this
Hello Zozo1799,
I understand that your iPhone 4s is not recognized by iTunes. The following article may help to resolve your issue:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
ITunes does not recognize iPod (3rd gen?) even after trying everything...
I have searched and not found this exact problem on any of the forum pages. My computer (PC) recognizes my iPod as an external USB drive. It is completely charged up (from the AC power). No error messages. Screen shows the "updating - do not disconnect symbol" constantly while docked but the pod does not show up in iTunes at all. I can get the main screen (menu) page by disconnecting the USB device through Windows, but when I try to select any of my data on the pod it shows nothing downloaded on the device. I've tried everything in the support section (most recent version of iTunes, checked that iPod service is running, reinstalled the COM interface for iPod service, deleted and reinstalled iTunes, etc. As a final resort, I "restored" the pod to factory settings using iPod Updater, but no joy...To say I'm unhappy is putting it mildly. Any suggestions before I jump out a window or something????
Pentium III Windows XPSorry for the curt/short explanations, but I am very frustrated.
My computer recognizes my iPod. iTunes does not.
iTunes does not recognize my other nano (2gb) or my friends shuffle. However, when my friend's shuffle is plugged into the computer, the iTunes window will pop up though I still can't see the actual device. On my nano and video, iTunes does not pop up.
In response I have...
I have reset my iPod.
*no luck
I have uninstalled an reinstalled the program 5-8x.
*no luck
I have run Spybot and Ad-aware just in case.
*no luck
I have changed the power management on my USB hubs.
*no luck
I have specified and changed the letter pathway of not only my iPod but my other usb peripherals.
*no luck
I have "reinstalled" the COM Interface about 5x after various changes.
*no luck
I have downloaded the recent iPod updater and that dealt with my iPod JUST FINE and then ran iTunes.
*no luck
I have selectively chose the with processes are on the startup.
*no luck
but for good measure, here are the processes running right now:
taskmgr.exe
svchost.exe
firefox.exe
Zboard.exe
qttask.exe
alg.exe
ctfmon.exe
lsass.exe
services.exe
winlogon.exe
csrss.exe
smss.exe
explorer.exe
iPodservice.exe
zboardtray.exe
spoolsv.exe
iTunesHelper.exe
wdfmgr.exe
Programs like Anapod recognize my iPod. They both mount and execute processes just fine.
Can anyone help me here??
hp pavillion zd7360us Windows XP Pro iPod Video 60 GB and iPod Nano 2GB -
Itunes does not recognize ipod after new version was intalled
Hello there,
I just downloaded and installed the new iTunes 7.1.3.1 version and when I first plugged the ipod after the instalation it said " unable to update ipod". I unplugged the ipod from computer and when I tried to play, it frozze up. Now I can't turn off , or do anything w/ it. I tried the troubleshhoting steps of Apple's web site, but no help there. Now my itunes will not recognize the ipod, nor does it update my podcasts. Any help out there???? I have WIN XP, IE 7.
Thanks a lotHello there,
I just downloaded and installed the new iTunes
7.1.3.1 version and when I first plugged the ipod
after the instalation it said " unable to update
ipod". I unplugged the ipod from computer and when I
tried to play, it frozze up. Now I can't turn off ,
or do anything w/ it. I tried the troubleshhoting
steps of Apple's web site, but no help there. Now my
itunes will not recognize the ipod, nor does it
update my podcasts. Any help out there???? I have WIN
XP, IE 7.
Thanks a lot
Sorry, I forgot to tell, my ipod is the 5th gen video 60GB -
My child's iPod touch is locked. No one knows the password. I have tried connecting to iTunes but since itouch is locked, iTunes will not recognize It. How do I unlock the itouch? The hard reset does not work either.
iOS: Unable to update or restore
-
After installing Leopard and combo iTunes does not recognize iPod Touch
Hi, probably this question has been asked somewhere, but I can't find it. Given that after upgrading to Leopard and the combo, my iPod is seen in iTunes, but my iPod Touch does not show up in iTunes. The answer seems to be to reinstall iTunes, if I do that, will the reinstall keep my fine iTunes music library? thanks, e_moma
Most people in this situation seem to have to re-install iTunes. iTunes the application resides in the Applications folder. Your music resides in ~/Music/iTunes/ and will not be affected by re-installing the application.
Of course you have a good back-up on an external drive anyway - right(?)
regards
mrtotes -
I was downloading the latest OS and it started to install. Before I knew it the compputer said there was problem installing it, the itouch was put into safe mode and now itunes doesn't see the itouch. I have tried to reinstall itunes. I have restarted the itouch. And nothing I have tried has worked.
No knowing what safe mode is, all I can suggest is:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!
This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2 -
I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected. Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes. I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success. ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes.. Please help!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
I have a 2nd generation iPod touch. I have not updated the software from version 2.2.1. When I connect to iTunes to update to 4.2, I keep getting an error message. Has anyone else had this issue and figured out a way to fix it?
Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too -
After I purchased , downloaded it and installed it , my Ipod Touch 1st gen restarted and show connect to Itune but Itune does not recognize it, I restarted the PC, the Ipod, now I paid for something that I was thinking will be easy and make my life easy
See if placing the iPod in DFU mode will allow a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
HELP
My iPod classic (2007) 80 GB FROZEN SCREEN (Now Playing window showing the song that is suppose to be playing, will not respond to buttons, Will not SYNC, iTunes does not recognize it AT ALL when I plug it in. Will not shut off, will not charge... pretty frustrated, I updated it recently (within the last 10 days....Has anyone had similar experience? If so was it fixed? Please post any help for me... thank you... I am pretty frustrated right now.its fixed!! After posting my problem with the FROZEN ipod classic (2007) 80 gb a screen popped up with similar subjects that I did not find in my original search. 'Rich Fleming' in the community posted a suggestion to someone with a similar frozen issue and it WORKED when I tried it.
hold the 'menu' and the 'circle' buttons down at the same time, KEEP the pressed until the apple appears. and now it is working. Hope this helps others. -
I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
-
i updated to ios 5.1.1 and added icloud services. the problem is now whenever i connect my iphone to my PC, itunes does not recognize my phone. i need it to but it just does not connect..
Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If you still have the problem that points to a hardware problem. Yu can make an appointment at the the Genius Bar of an Apple store or try:
fix for Home button
Maybe you are looking for
-
Bluetooth accessory charger doesn't work all the time...
When i charge the phone and headphone on the dual charger, only the phone charges. I was able to see them both on the phone screen but now i only see the phone. It also happens when there is a syncing problem with iTunes. Any suggestions???
-
Wrong GR/IR account derivation for PM01 orders
Wrong GR/IR account derivation for PM01 orders which will settle to related WBS elements Two gr/ir accounts have been determined with object class investment and overhead. The FI document picking up different accounts and not the same account for pm0
-
Query Needs to be changed to only use 1 Table
I would appreciate some help with changing this query to only use the table "ain.impl_oh_order_header oh table" SELECT oh1.partner "Dealer", od.sales_code "Dealer Sales Code", oh1. external_order_number "Original Dealer Order Number", oh1.region, cus
-
HI gurus, There is a scenario which has to be solved, I am transferring some costs from one WBS to another whose budget is maintained by IM program, and it has been periodically settled to an AUC , now the business wants to transfer the ongoing proje
-
Scrolling text or document display in Keynote '09
I would like to build an animation that would scroll through a list of about 100 names, one name per line (or two) from top to bottom, at a readable but not slow cadence, somewhat like movie credits. The list could be in a Pages document, a PDF or di