After the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean
after the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.
Similar Messages
-
My macbook all of a sudden crashed. When I turned it back on, the fan was running, the battery icon had an "X" over it, and although the power cord is plugged in and the light on it is green, the battery life is still saying that it is 0%. What is wrong with my computer!?
Hi Jen.
It appears that the battery is perhaps faulty. If you go to -> About This Mac -> More Info -> Power, could you please tell us the Full Charge Capacity (FCC) in mAh, and the Cycle Count please.
Also, you could try resetting the SMC, to see if that makes a difference.
Good luck -
Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you
Hi Poonam26c,
If you do not have a local copy of a song which you have purchased (i.e. it is available via iTunes in the Cloud), you may need to redownload it before you can transfer it to your device. You may find the following article helpful:
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Regards,
- Brenden -
I dropped my ipod touch and now it will only charge to 20%. It does turn on and the screen I get shows me a picture of a USB cord and a cd with a music note on it that says itunes under it. What does this mean?
connect it to your computer and open iTunes
-
I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC, although I purchased extra storage in order to do this.
If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.
-
I turned my Iphone 4 off. When I went to turn it back on, up popped a silver screen that read Iphone with no service. My service has not been cancelled. What does this mean, please help?
If a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Im installing and it tells me it make a recovery disk? What does this mean?
I'm installing the new mountain lion and it say that it needs a recovery disk? I don't know exactly what it is asking? Please help!
Unlike OS X versions prior to Lion, Mountain Lion does not come with an install disk, and the installer will delete itself from your hard drive after you install ML, so you'll be left with no handy way to recover your drive in case of a problem (especially a problem during or right after install). Read the following MacWorld Articles to learn all about Recovery and creating a Recovery Disk:
<http://www.macworld.com/search?q=install+from+recovery+partition>
I actually needed the one I made this time right after installing ML--my Disk required some repairs--and I was really glad I had it!
Good Luck! -
ITunes tells me my songs are all "Unchecked". What does this mean?
Should I "Check" all my songs? If so, how do I do it? (All songs are on Windows Vista.)
That's consistent with all the tickboxes to the left of the tracks (in List view) being unchecked.
Go into List view and Ctrl-click one of the empty boxes to do a "global recheck".
If you can't see the tickboxes, head into your General preferences tab and select "Show list tickboxes" as per the following screenshot: -
what do I do to update?
Many people are happy with OS X 10.5.8 but since you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that.
You can discover more about various Macs at: http://www.apple-history.com/
The OS numbers and names are:
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
You can buy Snow Leopard here:
http://store.apple.com/us/product/MC573Z/A
For details about upgrading this to Lion or Mountain Lion see:
http://store.apple.com/us/product/MD256Z/A
In each case check that your Mac complies with the requirements.
If you are not in the US you should use the Change Country link at the bottom of the page. -
I am trying to finalize a project in iMovie but it keeps telling me that there is an error (-108). Can anyone tell me what this is and how I could fix it?
r0b0c0pHi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W -
Hello
What shows on your Adobe account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page -
when attempting launch of photoshopcc,I get a box with "could not load the MMX core routines module because it does not work with this version of PS... what does this mean and how do I correct it?
I did a search on my system and found the Photoshop has a fastcore plug-in. Creative Cloud includes a subscription version of CS6 version 13.1.2. I do not know if you installed that or not. The cc un-install may have done something. You may need to use Adobe Cleaner then Install The Perpetual CS6 version of Photoshop CS6 version 13.0.6 Mac or Photoshop CS6 version 13.0.1.3 PC and not the subscription CS6 extended version 13.1.2. Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 If you need to download the CS6 installer Download CS6 products.
You may also be able to recover your cs6 using an old system backup
fastcore.8bx on my system... -
when I try to update Firefox I get a window saying it can't be loaded because I do not have all the necessary permissions. What does this mean and what do I do?
If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox -
I tried to install Mac OS 9.1. I turned the computer on, heard the bong noise (although with some static), and inserted the OS 9.1 installation CD. It started to boot, but froze up. I rebooted the machine, and the same thing happened. One more reboot, and i get 3 beeps and the power button is blinking. What does this mean?
Hi, it indicates a RAM problem, (or Logic Board around the RAM).
The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/ht1547 -
When I attempt to install Itunes on Windows 7, I get the message "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." What does this mean?
So many people are having this problem! Doehunter's instructions here worked for me! Hope this helps. https://discussions.apple.com/message/23824640#23824640
Maybe you are looking for
-
The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present
Hi All, iam trying to load data from r/3 for the DS 3FI_SL_J2_TT , when i see in BW , the transfer structure is inactive in Dev system. So i activated the transfer struc. but after activation also its shows as inactive. and also iam getting this erro
-
Hi all What is the problem in this code declare type temp is record (invoice_num inv_detail.invoice_num%type); type temp5 is table of temp index by binary_integer; temp6 temp5; idx integer := 0; begin go_block('inv_search'); first_record;
-
5th Generation Airport Extreme - Wifi Slow, dropping connections
I just upgraded my 2nd generation Airport Extreme to a refurbished 5th generation I purchased from Apple.com I duplicated the configuration of the old one, as I have a static IP address and what not from my ISP. Also, I have a few port mappings for o
-
As it says above, I have cookies set to always ask. I go to a domain (i.e. google) and it asks and I allow for session only. Some time later it will change to "first party only" and start to allow persistent cookies for the domain.
-
I want to know if AppleTV2 purchased within the last two months and upgraded to IO5, can be upgradedby software to the new Apple TV2 or will Apple allow me to trade in my model on then new model. P