After the installation of CC 2014, I can't start an editing of an image into Ps from Lightroom.
When I choose Edit into ... Photoshop CC 2014, Ps is launched but nothing happens.
I just can launch an edit as advanced object and in this case the image appears into Ps.
Any suggestions ?
Marco Lugli
Uninstall and reinstall PS CC 2014. This fixes things for most people with this problem and there are many.
Similar Messages
-
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
After the installation of iO7 my Ipad didn't start. Only the Apple appears. I don't have jailbreak, everything is original. What should I do?
Thanks Zane, but didn't work.
I follow the procedure step by step and the Apple logo still appears and froze.
Other suggesstion?
Thks. -
Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I Have problems with my iPhone 4s after the installation of the new iOS8, the phone doesn't want to switch on again. I need to recover some important data that I have inside the phone.
Ralph Landry1 wrote:
There isn't anything you can do to recover contents from iPhone 4s if you cannot get the iPhone to startup. Connect it to a wall outlet so you have a solid power source, then do a reboot by holding both the power and home buttons until the apple logo appears, ignoring the red slider if that appears. If the iPhone still will not startup, the next options to try will automatically erase your iPhone all of its contents.
The next step is to do a restore via the recovery mode as described in http://support.apple.com/kb/HT1808 but again note that this erases the iPhone.
Thank you Landry, it is really a good experience to solve problem of iPhone Data Recovery! -
Hello after the installation of new software iso 6.0 I can not find youtube any more. Where is it now? Thank you.
The YouTube app is not included in iOS 6. You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google), or try accessing it via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)
-
What can I do to repair error -42110 after the installation of your solftware update to version 11.0-2-25 ?
http://support.apple.com/kb/TS1424
http://support.apple.com/kb/TS3297 -
Hi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
the message resource is present but the message is not found in the string/message table
Thanks
Suresh
SureshHi,
Can any one help me on the below issue ?
while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
progress, after 2 or 3 min some of test cases getting passed and some are failed.
Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3 links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
Error Message :
The description for Event ID 0
from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
(mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
Could not find a part of the path
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
temporaryDirectory)
the message resource is present but the message is not found in the string/message table
We are using VS 2013 (premium) and IE 10.0, scripts have been created on the same versions. It is working fine on
developers command prompt but the same tests are getting failed in lab center test agent machine
test agent log:
QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
QTAgentService.exe, AgentPro
QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
QTAgentService.exe, AgentService: Connection to controller is up.
Thanks
Suresh -
Who kills your iPod after the installation of iPod updater?
Hello all,
First, sorry for my poor English. I am not a professional nor a technician and I could be wrong, so please correct me. There are many problems reported mainly from the PC users that their iPod can't be recognized nor mounted after the installation of the latest iPod updater. Most of them claimed that the iPod updater kills their beloved iPods. Before we jump to a conclusion, we must understand what is iPod, and how does the iPod update work.
I believe that iPod equals a basic computer and need a OS in order to communicate with the PC. Installation the Updater will format the Hard disk of the iPod and then install the simple OS, so if we open the iPod updater file, it will show a window with two buttons i.e. Restore and Update, an Update is to copy the latest OS over the old version, but the Restore will format the hard disk before it install the OS over it. And importantly, during this process, the iPod needs sufficient of power to complete the upgrade, however, the problem comes just after the format, and the PC's USB (only 2 will work not 1.1) does not supply the stable power,even some cases that iPod does not get charge in the half way of installatin (a proper installation, you will see a running bar showing on the iPod screen just after the format), so you can imagine a hard disk got format but only got an uncompleted OS, of course, the iPod would not get recognized and mounted, and do not manage to communicate with the computer. At this stage the iPod will show a Sad iPod icon, a folder with exclamaiton points or a battery charging icon.
So, what would you do when it reach at this stage, a Reset would not work, and you would not able to do the Restore as the iPod is totally unrecognized by the computer.
Therefore, is there anyway to solve this problem, in my opinion and from my past experience, the answer is "yes", the simple way is to put your iPod in Disk Mode, when it plug to the computer, it will show as an external Hard Disk, you must fix it by doing a format (RESTORE would not work at this stage as it still can't recognized and mounted), in Mac we can use "Disk Utility" but the XP would not allow you to do the format in FAT32. After the formatting, replug the iPod with the computer, then it can be mounted and allow you to do the RESTORE.
In addition, I find an interesting point is, if your iPod formatted with a Mac, you will have better chance to be mounted with a PC, even your iPod does not complete the process of the installation of the iPod updater, and a PC formatted iPod will be likely to be fixed by a Mac as well.
How should we do before the update of the lastest software, for the XP user please do the following:-
1. Go to the system restore and create a check point in order to revert back to the previous version of the iPod updater, or do the back up using the 3rd party software such as Ghost or Go Back.
2. To have a test and make sure the PC's USB works properly. You can use the iPod or a PDA, and just make sure it got charged.
3. Have your iPod a full charge before the installation of the iPod updater
So, who is the main killer for the iPod?
For further infomation please read the following link - which wrote by a groups of great people - thank you guys
http://discussions.info.apple.com/webx?128@@.68ae8668Hello Shanker Ghimire,
Please try run the following command:" devenv /resetuserdata " to have a test, it will clear all your settings.
By the way, have you ever got any error when install that Visual Studio SDK?
In case there are some unknown errors, I'd like to ask you for some logs. Please use
http://aka.ms/vscollect
to gather the installation logs. After using it, you will find vslogs.cab from %temp% folder. Please upload the file to
https://skydrive.live.com/
and share the link here.
Best regards
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
Connect SAP BO server to domain after the installation.
Hello,
I would like to ask if it is fine to connect SAP BO BI 4.x Windows host to the customer domain after the installation of SAP BO.
I was trying to find answer on this but nowhere is explicitly recommended to connect SAP BO host to domain before the installation.
My question is related to Windows AD Authentication where two conditions need to be secured:
1. Windows AD authentication only works if the CMS is run on Windows
2. These Windows machine must be joined to the appropriate AD domain
What I found till know is that you can use Windows AD Authentication only when SAP BO server is in domain.
What is concerning me is that when I start with installation of SAP BO on the server which is not connected to any domain then the installation process is taking during the installation actual hostname of the SAP BO server (e.g. boserver) automatically. There is no requirement or possibility to specify hostname or IP address manually during the installation process. And I assume that connecting SAP BO server to the domain after installation will cause that hostname will change (e.g. to boserver.domain.com).
So question is if this change will cause any issue for functionality of SAP BO application. If not could you please send me an official statement from SAP Note or any BO Documentation as I was not able to find any.
Thanks in advance for opinions and answers.
BR,
PeterHi Bill,
thanks for reply. I spoke with couple of my colleagues which are supporting AD and yes I can agree with you that connecting server to the customer domain after the installation of BO can bring some limitation up to Domain policy.
Best practice in order to prevent possible issues is to join server to the domain before installation.
Another possible issue can be that some customers are using own naming convention for server's hostname so joining server to the customer domain is conditioned by a change of hostname and this can cause issue with correct functioning of BO application.
Thanks again for your opinion I really appreciate it.
Wish you a nice week.
BR,
Peter -
After the installation of Lion I don't see the partition with Windows 7. The solution?
After the installation of Lion I don't see the partition with Windows 7. The solution?
Let's be real clear here -- are you saying you are using Internet Explorer and when you try and download Mozilla Firefox it gets around 75% through and shuts down?
If so there is something wrong with your computer -- or at least IE. I rarely, if ever, recommend this, but it might be time to reformat your hard drive and reinstall your OS (if you are even thinking about doing this the first thing you must do is back up all your data files, preferably to writable media like DVDR or CDR).
If you have a friend with a computer perhaps you can get them to download both the latest iTunes as well as (more importantly) the latest firmware updater, and then install them on your machine (they can write them to their own CD).
The other thing that occurs to me is you might not be logged in as admin on that computer -- make sure you are doing this and are the only user.
Otherwise my brain is fuzzy right now -- perhaps someone else can jump in after you reply (I'm right in the middle of packing for a cross country move and only able to spend about five minutes a day on this board). -
IMessage doesn't work after the installation of the update 5.1
iMessage doesn't work after the installation of the update 5.1
I am unsure whether my issue relates to updating to OS5.1 but seems coincidental that I have only had the problem for the last few days since updating.
I can use iMessage without a problem although some messages are delayed in being sent or received recently. However, I can no longer send MMS picture messages. I have spoken to my provider who has been through all their relevant settings checks. I have restarted the phone (iPhone 3GS), I have tried turning off iMessage to send MMS but still nothing works.
I've had no issue sending MMS picture messages since owning the phone right up until a few days ago.
Has anyone else experienced this or does anyone have any suggestions on anything else I can try please?
Thanks
Jo -
Package status not appended in the Add Remove Programs in control panel after the installation.
Hi,
I have a strange problem with "Package status not appended in the Add Remove Programs after the installation.".
Like, onec the package is installed via SCCM, it should be listed in the Add Remove programs with the package name, version and the install date.
At times on random machine these details are not appended. Although the application works fine on the machine, but the correct details are not populated in Add/ Remove programs.
There is no issue with the package as it shows correct details on few other machine where it is installed.
This behaviour is random on random machines. Hence, very difficult to track the reason.
System Security analyst at CapGHi Jason,
Yes, i have tried Jorgen's suggestion, ans as said earlier. It install the application smoothly on any other machine (any random machine) perfectly with correct details in Add Remove Programs.
As mentioned earlier, the same package, same environment, same set of machines with same OS, it installs correctly on few machines.. and on few its just misses to add correct details in Add Remove progs.
If it was related to package, how does it install corretly on other machines?? How does the same package installs correctly when done manually or by that means by PSEXEC.
To a matter of fact, we are checking our package for the multiple times now, just to make sure it is buldled correctly with correct install scripts. We are trying to search different multiple ways to see what makes the package to skip the
correct entry in the Add Remove.
To add, this is not with one package, it happens with random package with random machine. There is not typical behaviour that could be tracked.
All the installations done via SCCM 07, with admin account.
This looks more tricky and complex then as simple as saying, its the fault of packaging.
I hate to say this but this is NOT a CM07 problem, You will need to work with your packaging team, and use tools like process monitor,psexec and the msi log to determine why it is failing.
Your first step is to find a pc where you can consistent get the setup to fails. once you get that you can use process monitor and the msi log files to determine what is going on.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
I have been trying to download Adobe Air for a website I'm trying to access (Colonial Williamsburg). After the installation was finished, I went back to the website and it still said I didn't have Adobe Air. I tried reinstalling and Adobe said I already have it on my system (Mac OSX 10.9). I can't find the app. I uninstalled, restarted, etc. and same results.
Thoughts anyone?Lanakivee
Try this it worked for me Pat Willener gave it to me off the site :
I have not read all you wrote, so I may have missed some points. As I understand it, you installed FP 10 on IE7, but it won't play any Flash content?
Try this
download the FP uninstaller from http://www.adobe.com/go/tn_14157
close all browser windows, then run the uninstaller
download the offline ActivX installer for Internet Explorer from http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
close all browser windows, then run the installer
Maybe you are looking for
-
Blue screen on restart after 10.4 install
i have an ibook and tried to upgrade to 10.4 from 10.2.8. after having to try twice to install 10.4 (i kept getting the "try again" error message), it worked. but on restart, after the grey "OS X" screen, it goes to a blue screen and just sits there
-
Apple mobile device service has stopped working - continues
Hi I have a 16GB iPhone with 02 in the UK. My first iPhone with 02 had trouble receiving calls with about 90% of incoming calls going straight to voice mail. I also couldn't backup that phone as every time I tried with iTunes, i got the message "Appl
-
I am using Mac Labview 8.5.1 and it does not have the "Sound output info Vi". Does the newest Mac Labview have this VI. I need to determine if a sound is in progress so I can stop it and start another.
-
Sleeping ipod touch white save batterie
Does Sleeping ipod touch white save batterie?
-
Attachments folder from B1 client
Hi all, If a user wants to upload or attach some documents in SAP Business one to a BP, or activity they need to follow the path where the attachement folder is defined. This path for attachment folder is appearing in all the clinets / user machines