After the ios7 update I am not able to scroll in the notes section in reminder?  Any suggestions?

Prior to the update I was able to use the notes section in the Reminders program.  When I would type a lot of material the box would automatically scroll as I would type.  Now, it stops scrolling and I can't see what I type.  

Having the same problem - and its frustrating!

Similar Messages

  • After 2.3 update I can't get 3G to come on or stay one. Any suggestions ?

    I noticed that since the 2.3 update that I can't seem to get 3G to activate.  I do have data roaming on. 
    Sometimes when I turn off wifi the 3G symbol flashes, but it goes away quickly. 
    This happens regardless of location, but I am testing it at home where I did have 3G coverage in the past. So I expect it to work.
    Any suggestions?
    thx
    Joe

    This is stupid.
    I did the *228 - 2 option a few days ago without an issues. Now when I try *228 it fails to dial and tells me to contact customer service. Hard to do without a working phone.
    **bleep** at VZ and Moto need to do a better job with software updates. Between these issues and the new data plans i will be willing to go elsewhere when the contact is up.
    Going to reboot phone and see if that helps.
    joe
    wow - guess VZ has some auto-censor software going for all posts and you get "**bleep** " if you offend them. lol

  • After the ios7 updated I can not open the iTunes store in my iPhone 5

    After the ios7 updated I can not open the iTunes store in my iPhone 5
    How can I fix it?

    Hi adrimomo,
    Welcome to the Support Communities!
    Here are a few things you can try:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If you have tried those two things, refer to page 146 in the iPhone User Guide to Reset All Settings:
    iPhone User Guide for iOS 7
    manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    Also, check your settings for Safari -- enable cookies and turn off private browsing - see page 57 of the iPhone User Guide above.
    Cheers,
    - Judy

  • My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    My IPhone 4s is freezing up and the wifi will not work. This happened after the update. I have tried to restore it and that did not fix it. Any suggestions?

    Most of your purchases content can be downloaded again via the Purchased tabs in each of the store. I realize that this will be a problem for the iTunes Store on the iPad, but that has nothing to do with apps, since apps are in the App Store.
    If you backed up synced with iTunes before you restored the iPad, your content should be in iTunes on your Mac and you should be able to sync it back again.

  • Able to connect keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please

    Hello,
    I am able to connect my wireless keyboard to only one mac ...not able to connect to my other mac at work after disconnecting the first one ...any suggestions please
    thanks,

    Hello:
    You will need to delete the keyboard from the other Mac.  Simply disconnecting it leaves it still paired with the first Mac.
    Barry

  • After installing iOS7 update my WIFI is very slow.

    After installing iOS7 update my WIFI is very slow in my iPad 3rd Gen, iPhone 5 and iPhone 4. Is there a fix for this problem? I've reset my modem and AirPort Extreme 3rd gen. Problem still exists. Help

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset Network Settings
    Setings>General>Reset>Reset Network Settings

  • After installing iOS7 update  ipad sought passcode disabled restore dead! Now what?

    After installing iOS7 update my ipad magically wanted a passcode to open.  I tried several of my usual passwords but none worked and it disabled for increasing lengths of time.  Eventually after reading up a bit about it I strated to restore it to factory settings but was interupted your this process and was unable to complete it fully (to be honest I'm not keen to do this anyway as I don't want to lose all my data - photos, and fail to see why I should simply becasue of a bug in iOS7).  Now my ipad is totally dead and will not respond to anything.  What can I do now?

    It is still not working.  I have had Apple support on the phone twice as each time I get through the restore process it comes up with an unexplained error (3194) which they keep telling me is because I have a firewall preventing it from happening.  This is wrong because I have removed the firewall and it still comes up with the error message and will not restore.  I now have to take it to the guys I have had look at my computers from time to time to sort it out (presumabley at my cost).   If and or when it gets to the point to restore, yes I can restore from iCloud an should get all my data ok but I shouldn't really have to go through all this drama as the iPad is only very new and still under all of it's warranties etc Completely unimpressed with this whole thing.

  • HT201263 Can anyone help? I cannot activate my  iphone after an ios7 update.

    Can anyone help? I cannot activate my iphone4 after an ios7 update. I have carried out a  recovery-mode restore but when the phone is switched back on I enter the UserID and Password that are verified via itunes and icloud but no joy. It tells me the used ID and password are not correct.  This is is second hand phone that I have hand for a year. Apple says that I have to contact the previous owner to get their User Name and Password. This is impossible.They might have even passed away. I can believe Apple would do such a crazy software release.  There must be thousands of people in my shoes. 

    This is the new Activation Lock feature that users have been wanting for years to prevent stolen phones from being restored and used by the thief.
    If you cannot get the password to the previous user's AppleID then the phone will be useless to you.

  • After my ios7 update

    where do i go to approve the new legal for the app store after my ios7 update?

    I THINK that i was able to fix this issue.  The funny number was in my iMessage profile and then i logged out and logged back in and the number left the profile and my contacts say my regular info is showing up now.

  • Ipad mini working sluggish after installing ios7  why apple is not fixing this issue

    Ipad mini working sluggish after installing ios7  why apple is not fixing this issue
    Now it doesn't feels like i m using an apple device .
    idevices should be flawless thats what it was

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • When I try to update my iMovie to be Maverick compatible, this is what I get " Your computer's video card does not meet the minimum system requirements."  Any suggestions?  Thanks

    When I try to update my iMovie to be Maverick compatible, this is what I get " Your computer’s video card does not meet the minimum system requirements."  Any suggestions?  Thanks

    I have a Mac Pro earley 2008 with 16gb ram and the original ATI Radeon 2600 XT 256mb ram card.
    After searching everywhere and finding no helpful info I just went to amazon and serched video cards for Mac Pro. The Asus HD 6450 silent and others came up. They all show PC compatibatily but since Mac is now PC structure I think allmost any card will work that is PCI-e.
    I purchased the Asus HD 6450  for $39.00 with $10 rebate and it worked great, ( plug and play ).
    My startup is way faster than before and graphics are way better.
    The DVI works great with my Viewsonic and if you need to connect more than one monitor the DVI and VGA are secondary. If your main monitor is HDMI than you will have no problems using more than 2 screens in sharing mode.
    http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Daps&field-keywords=A sus+hd+6450+silent&rh=i%3Aaps%2Ck%3AAsus+hd+6450+silent

  • After downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.

    additional info.
    I have found the correct error definition in english.
    "can not start the device (Code 10)"
    I have updated my bios to the latest version.
    I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
    I have tried to uninstall and reinstall all webcam drivers - no luck

  • HT4623 after installing ios7 my Iphone4 will not work

    after installing ios7 my Iphone4 will not work

    Try a reset: hold down the home button along with the power button until you see the Apple, then let go.

  • HT1689 since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    since doing the 7.0.4 update i notice that my mobile data has doubled and i am running out of data mid month.  I've disabled apps s not many running.  Any suggestions?

    I am having the same issue even with the newer 7.1. I have a 1-100 KB data push on both my husdand's and my phone every hour on the hour (i.e. my will be at :23 of the hour and his will be at :13 of the hour and it will change). This is whether we are on a WIFI and with all apps, background refreshes, push notifications, etc turned OFF.

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Since updating to iOS5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to restore this feature.

    Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.

    There is No Pre-installed Youtube App in iOS 6.
    http://itunes.apple.com/app/youtube/id544007664?mt=8

Maybe you are looking for

  • Preventing Photoshop elements in Windows dialog when docked

    I am using an iPhone 3G, and have some more questions... When I've taken some new pictures with the iPhone and dock it to the computer. Two items automatically come up, Photoshop elements photograph downloader and a dialog from Windows asking what so

  • Problem in JA text Download into file

    When text file is downloaded from ECC ,  the Japanese character takes more spaces in the file , comparing to Earlier version 4.6 C ( NUS) .         For that other characters left to it  displaces from its defined position thanks bobby

  • HT1430 Ringer function button not responding any ideas?

    The ringer button  is not responding to up or down.. I'm missing calls, however settings state it's operational and alarm is still working. I will try to reset and reinstall original phone setting. But what a pain in the behind. Any suggestions to tr

  • Best way to create DVD

    I've exported a movie that I created in FCP 3 to a Quicktime file. I would like to burn the movie to a DVD that I can play on a DVD player. I've been trying to use iDVD 4, but its not recognizing the audio in my quicktime file. Is there another way t

  • Warnings

    Hi, The following sample code yealds duplicate definition warnings on the second "for each" statement. I thought the scope of the variable was restricted to the "for each" loop, is this not the case? Thanks in advance Richard Hernandez private functi