After the update, the screen inscription "unknown device"

after the update, the screen inscription "unknown device"

If movies/TV/Music colums are no there AppleTV is not connected to the internet or at least thinks it isn't.
Being able to access Shared libarries means you have a LAN connection active but not necessarily internet.
I assume Photos are streaming from computer - if you can access Photostream photos however that would suggest internet connectivity.
First things to do are unpower and restart the router and AppleTV and see if menu items come back or now work.

Similar Messages

Can't activation, in the screen show message device unknown

hi all,
i have iphone 5 but can't use because activation error.
my iphone 5 now installed ios 7.0.2 but can't activation, in the screen show message device unknown. please help.
thanks

Meanwhile I solved the problem myself: the layout screen had sunk to the bottom, just had to pull it up.

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed.

I got a new laptop and installed iTunes and plugged in my iPod but it won't get recognized on iTunes or in my computer, the computer says unknown device found and that the software was not successfully installed. What shall I do ? I tried reinstalling so many times and everything else I could find. Please help!

Hello MArk.wijesinghe,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Best of luck,
Mario

The recording device reported the media error: Unknown device error. (0x0C,

Hello
I have a problem making a DUAL LAYER DVD, i have done anothers before. But now I can't burn it.
It's a message error.
(The recording device reported the media error: Unknown device error. (0x0C, 0x00.))
Next this my Mac configuration.
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 3.2 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 6 GB
I have DVD STUDIO PRO 4.2.1, and in the log appears this:
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing VTS010.VOB
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing VTS010.VOB
Muxing VTS011.VOB
Done.
Linking VMG...
Linking VTS#1...
Writing VTS#1...
Writing VMG...
Writing Layout Info...
Compile Completed Successfully
Note: The file ‘UNTITLED_DISC.layout’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Note: The file ‘VOB_DATA.LAY’ found in the ‘VIDEO_TS’ folder is not a DVD-Video file and will not be included in the final disc or DLT.
Start formatting
Formatting as Standard DVD
Simulation mode is off
Lossless linking is on
Number of layers is 2
Doing opposite track path
Setting layer switch at sector 2053488.
Doing side 1 of 1
Playable in region 1,2,3,4,5,6,8
Disc size is 12 cm
Disc has no copyright material
Writing ISO 9660 directories
Writing UDF 1.02 structures
Writing files
The recording device reported the media error: Unknown device error. (0x0C, 0x00.)
What should be the problem?

There could be a few reasons, a common one is bad DVDs or a burner going bad.
[Some threads discussing the error|http://discussions.apple.com/search.jspa?threadID=&q=Therecording+device+reported+the+media+error%3A+Unknown+device+error.+(0x0C%2C0x00.)&objID=f952&dateRange=all&userID=&numResults=15]
You can try the [arrpoach in this thread|http://discussions.apple.com/thread.jspa?messageID=2453295&#2453295] as s start.
Take a look at this
Not sure which brand of DVDs you are using, but [this guide rates brands|http://www.digitalfaq.com/reviews/dvd-media.htm]
Verbatim are usually good for me for DL.

My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?

If the Reset didn't work, you'll need to do a Restore.
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad.

The recording device reported the illegal request: Unknown device

Has anybody any idea? I am not able to output a dvd-9 (dvd + dl). there is always the message: the recording device reported the illegal request: unknown device. The layersize is ok and the dual layer brake is set.

I don't have the exact error message with me, but that sounds similar. I bought a new DVR-115 for my Mac Pro and put the existing DVR-112 in the bottom slot. The DVR-115 worked fine for a month or so, then started getting that or a similar error. I replaced it under warranty and soon got the same thing. Then I Googled the error message an found many people having the same problem, even people with PCs. Now I just burn with the DVR-112, not worth resolving. BUT, I could be remembering the error message incorrectly, so Google and see what you get.

Macbook Pro loses Airport Extreme after the Screen switches off.

I am experiencing problems where my MBP is losing the network connection with my Airport Extreme after the screen switches off (the MBP is not does not sleep).
I could be watching a video streaming from my MBP to my ATV, and all of a sudden it stops, and the ATV loses its connection with my MBP. On looking at the MBP it is still connected to the internet, but it can't physically see my Airport Extreme. I've opened the Airport Utilities program and it cannot find the Airport Extreme, even though I am still connected to it.
The only way I can fix it is to turn off the Airport on my MBP and then turn it back on and everything comes right.
This has only just started happening in the last week or so, and I have never had a problem before.
I've had a look through the forums, and on Google, but others seem to be losing their internet, etc. I am still able to access the internet, just not anything connected the Airport Extreme (e.g. USB harddrive).

What are you doing to change it to a static channel? I've been having this same problem and have tried going to Network Settings>>Advanced>>TCP/IP>>Configure IPv4, changed setting to "Using DCHP with manual address", and changed the IP address to an available ip. I've done this a lot of times before I had the monitor problem to solve the IP conflict problems I get sometimes on my network, but this didn't fix the external monitor issue. Is there something else I should be doing? Thanks

The camera on my iphone4 opens up but seconds after the screen turns black with white line.

Hi guys! Please help me I have iPhone 4 .the camera although opens up when I press the button, but seconds after the screen turns black with white line. Need I need it repaired or there is some trick which can set it right.?

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i

Update the iPad 2 with new iOS uppgrade, but after the screen only show the apple and nothing else. has been the case since yesterday. have turned off the iPad and turned it on again many times, but still only apple shown. What should I do?

UPdate the iPad wjith new iOS upgrade that where shown under settings on the iPad, but after I did the upgrade the screen has only shown the apple and I can't get back. This has been the case since yesterday. Have turned off t.he iPad many times, but every timebwkhen Ibturn it on again the screen onöy show the apple icon and nothing else happends. What should I do? Anyone having the same problem and how can this be solved?

Did you try to connect in recovery mode, explained in this article?
iOS: Unable to update or restore

After the apple logo my device wont open!

Hello. I have an ipod touch 5g. I've been using it for at least 2 years. Today i updated it to ios 8.1. After that my device shut itself and didn't open. Whenever i tried to open it i can only see the apple logo. After the apple logo shows up it turns into the black. I also tried to plug my ipod to my macbook but there's no phone symbol appears in itunes. Also my home button is broken so i can't use it. What can I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My daughter forgot her password and now her ipod touch is disabled. When I connect it to itunes it does not come up on the screen as a device. What can I do to get her itouch working again?

My daughter forget her password and now her ipod touch is disabled. Red message says to connect to itunes. When I do connect to itunes, the device is not recognized and then a message comes on the screen that says it is locked and to enter the password to access it. I cannot access the password and since itunes does not recognize the device, it does not come up on the list on the left, i cannot reset it. What do I need to do so she can use her ipod touch again? Thanks

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

When I open iTunes and am also connected to my iPad, I do not get the screen where my device should be listed.

When I open my iTunes and am also connected to my iPad, I do not get the screen where I can select a device or choose the Summary tab. What am I doing wrong?

Hello Hegsted60,
Sorry to hear that your iPad is currently not recognized by iTunes. I found an article with steps you can take when you experience an issue like this. I wasn't sure whether you were using a Windows or Mac computer, so I included the respective articles for each:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1386 I turn on itunes, plug in my ipad - but what appears is my list of songs, not the screen witht he 'devices' option that is shown in the instructions. What do I do to get that screen?

I am having a problem getting music from my computer to my ipad, though it works the other way.
I can't get the set up screen. I turn on itunes, plug in the ipad, and my music list comes up --- not the screen with 'devices' that the instructions say will come up. How can I get to that screen?

With iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC. When the iPad is plugged in it should then appear on that left-hand sidebar under 'Devices' so that you can select it, and then use the tabs on the right-hand side of the screen to select what to sync to it.
Syncing music : http://support.apple.com/kb/HT1351

How can you record the screen of any device with no computer and no jailbreak?

I would like to record the screen to record my gameplay and other stuff. Please help.

Josh, this was my first gripe when I moved to IronPort toward the end of 2008; I forget the version of Asyncos we were on then. Remember that the design philosophy (as I'm given to understand it) is that you shouldn't have to nursemaid it as much as some other gateways, though achieving that is more a question of developing robust mail policies than simply plugging in the device and running the setup wizard.
I found the Asyncos GUI a bit of a pain to work with for header analysis, but I've adapted over time. It's only an annoyance now when you need to see an attachment file name that scrolls across three or four screen widths, and by comparison SharePoint gives me more grief in that department (we're on a paleolithic version here).
For some things we send a copy of quarantined items out to a dedicated mailbox only accessible by staff monitoring our gateways; for more details see my posting in your thread "Can't View Video Files Attached To Emails".

After the update, the screen inscription "unknown device"

Similar Messages

Maybe you are looking for