After the update to iOS 8 the power button of my iPhone (iPhone 5 16gb) starts to fail
Hello guys,
After the update to iOS 8 the power button of my iPhone (iPhone 5 16gb) starts to fail and before the update it was working properly.
I'm a certified iOS developer and this same situation occurred when i tried to install the iOS 8 beta 2 on the same iPhone i mentioned above, but i had to reinstall the iOS 7.1 just a few days later and the button starts to work normally again.
Any thoughts about this?
Have you checked to see if your phone is eligible for the Power button replacement?
https://www.apple.com/support/iphone5-sleepwakebutton/
Similar Messages
-
help me please my ipad don´t tur on
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i have an iphone 3gs........it is not jailbroken........I was updating to iOS 6!! THen a box came up saying ios 6 will install in 5 seconds................ after wards....... it shut down then restarted.............. the apple logo came up and then below it was a bar.......... it had to be full to complete the installation ............ after a few minutes the bar stopped in between and remained stuck!!! then i pressed the home button and the powerr button together........ it turned off!!! then i restarted it ......... the apple logo comes up then goes off!! it happens and is not stoping until i press the power button once!! whenever i m starting it ....... the apple logo is coming up then goes off ... plz help me........... my father will scold me!! plz :'( plzz :'( thank u.......... :'(
-
Power button on my iphone 5s is not stable
Hi
I've purchased recently the new iphone 5s by friend in usa,
Since opening the box I noticed that is the power button on my iphone 5s is not stable ! It moves up and down and I've comparing it with several friends iphone 5s and it was the only one in this case, i am from jeddah saudi arabia and There is no an authorized dealer in my country for repair within the international warranty Please help me and Thank you And I wish you a happy day
# sorry for may bad englishThank You
but My friend returned back to Saudi Arabia -
After I updated to iOS 7, my iCloud account is showing the incorrect email address for my Apple ID but will not allow me to change it- it's gray and I can't click on it. How do I fix this?
If you change your email, you do not need to "change" your AppleID. Just edit your email(s) on your Apple ID by logging in to your AppleID account. You should always use the same AppleID for Apple Services (iCloud, iTunes etc) and multiple ID will cause problems and confusion in the future.
You can manage your Apple ID here:
https://appleid.apple.com -
i was doing a software update downloading ios 6.1 and the phone froze half way through the download i tried to restart the phone by pressing the power button and the home button but its just a apple on the screen. what can i do to fix this??
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
But... if the Device has been Modified... this will Not necessarily work. -
Safari on my iPad 4 opens the latest page used rather than to my home page.
This is new ,after I updated to IOS 8.3.How do I get it back to what it was?You're welcome. You're not alone. The change has left alot of people scratchiing their heads wondering why. Maybe if enough people leave feedback at the link below it will be changed.
http://www.apple.com/feedback/ -
i am having problems with my burst mode on my iphone 6 plus it is slower than the facetime camera after i updated to ios 8.3 apple please fix this issue i am fed up with all your mistakes
Gerald
If you had taken time to read the Terms of Use you agreed on joining this Community today you would have realised that Apple is not here
neither reading nor responding on this User Community
http://www.apple.com/feedback/ -
after I updated to ios 8.2 it's hard to have a phone call without my phone pulling up my contacts or putting itself on speaker, mute or hold on it's own.
Looks like the proximity sensor is not working correctly. Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches after installing new software.
-
After I updated to iOS 8, I noticed that while copying photos to my PC, I see photos being categorized into many folders now. I also found some system files in each of the folders containing photos (in the name of Local Disk). Is this usual?
I couldn't find the edit button on my original post so I am posting an update here.
I have gone through more apps and have had good luck on all but one more. And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should. On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much. I will post a note in the app store to let them know. I really like the Yahoo app better than the new stock app.
I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine.
Starbucks app works as it should.
I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again. -
After last maverick update macbook pro can't be shut down anymore - only by using the power button
Hello!
I hope that someone can help: after the last Maverick update I can't shut down the computer anymore - or restart. I need to use the power button. Furthermore several apps don't close when they are supposed to be closed - I always have to check with Force Quit. I could live with that, but not being able to shut down or restart the Mac is more than tiresome. Can anybody help?These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter "BOOT_TIME" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Note the timestamps of the BOOT_TIME log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
For example, if the system was unresponsive or was failing to shut down for three minutes before you forced a restart, post the messages timestamped within three minutes before the boot time, not after. Please include the BOOT_TIME message at the end of the log extract—not at the beginning.
If there are long runs of repeated messages, please post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A crash report has a name that begins with the name of the crashed process and ends in ".crash". A panic report has a name that begins with "Kernel" and ends in ".panic". A shutdown stall report has a name that ends in ".shutdownstall". Select the most recent of each, if any. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot. It's possible that none of these reports exists.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash or panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
I cannot configure my phone after just updating to ios 5, it says 'your iphone could not be activated because the activation server cannot be reached' i also cannot connect to itunes on my computer,it says 'your sim card is not supported' what can i do?
natalieduffy wrote:
it says 'your iphone could not be activated because the activation server cannot be reached'
Typically this indicates a device that has been hacked to be unlocked or jailbroken.
If that is the case, no support can be provided here. -
I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful
http://support.apple.com/kb/TS1275
-
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
After resetting the SMC the keyboard is inoperative. On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol). I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen.
When I try to login with my username, no characters appear as I type.
I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
Thanks for your helpWhat happens if you close the lid? Sleep?
In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover
Maybe you are looking for
-
Adobe album photo 'reconnect' causes Runtime error in Microsoft Visual C++ Runtime Library
When I try to open photos from any of my Adobe 3.2 Starter Album albums, it tells me I must reconnect the files. Adobe browses for them, and can usually locate them on my hard drive. Lately, it can't find them, and I have to 'browse' to locate them
-
I have weak, almost no sound using Windows 7 on my iMac.
All indicators on Windows say it's working and at maximum but it's barely audible. Suggestions? I have used the latest version of Boot Camp and cannot find a sound adjustment anywere else. The sound is fine on the OSX side.
-
need to erase all content on my iPhone but wifi is dead and iTunes says i need to turn off find my iPhone, please help
-
MBP 2013 Sleeping, fans running, but no display
Hi. I have this reocurring problem with my MBP late 2013 (the £1.8k model). Sometimes when I put the machine to sleep it will not wake but the fans will be running and the only way to recover from this state is to reset the machine using power+alt or
-
i have just installed ios6 and now some of the icons i had have gone from the front screen, how do i get them back ?