After the upgrade of SAP the screen got changed
the available tab in the screen got changed after the upgradation.
the changes of the upgrade has been transported to testinf server . But in production system the tabs are different in Project System CJ20N. Here earlier it was artist but aftre upgrade in testing environement its Cust. Enhancement also one new tab introduced LONG TEXT.
PLEASE PROVIDE THE SOLUTION.
Please respect Forum Rules..!!
(do not use full capital letters for message / heading)
It seems your Lay-out of flexible detail screen got changed, which needs to be corrected from the below path.
SPRO >> PS >> Structures >> Operative Structures >> Work Breakdown Structure (WBS) >> User Interface Settings >> Layout of WBS Element Detail Screens >> Define Layout of WBS Element Detail Screens
Please also refer SAP Notes : 304386 and 383310
Similar Messages
-
I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?
That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
iTunes: Restoring iOS software - Support - Apple -
My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
Is there any other way I can fix it or do I have to go to an apple store?Try:
Turn on without Home/Power Button -
My Ipod nano touch is not charging, not showing in my PC or laptop. Last I saw an apple icon and low battery signal. There after the screen is black and no power not taking AC or PC charge. What Can I do?
If the Reset didn't work, you'll need to do a Restore.
From iTunes, select the iPad and then select the Summary tab. Follow directions for Restore. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finished, you will be asked if you wish the contents of iTunes to be copied to the iPad. -
I was in Aussie last month and dropped my iPod Touch (4th Gen) on the road. The screen was cracked on the top left-hand corner (where the wireless area is). The screen got fixed but the wireless stopped working. So I am wireless-less... I bought it last July and its still under warranty, but can I still claim a repair on it?
No because it was physical damage
-
my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
help me ASAP pleaseHello sameen shah,
The following article would be a great place to start for information that can help get your iPhone working again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
Macbook Pro loses Airport Extreme after the Screen switches off.
I am experiencing problems where my MBP is losing the network connection with my Airport Extreme after the screen switches off (the MBP is not does not sleep).
I could be watching a video streaming from my MBP to my ATV, and all of a sudden it stops, and the ATV loses its connection with my MBP. On looking at the MBP it is still connected to the internet, but it can't physically see my Airport Extreme. I've opened the Airport Utilities program and it cannot find the Airport Extreme, even though I am still connected to it.
The only way I can fix it is to turn off the Airport on my MBP and then turn it back on and everything comes right.
This has only just started happening in the last week or so, and I have never had a problem before.
I've had a look through the forums, and on Google, but others seem to be losing their internet, etc. I am still able to access the internet, just not anything connected the Airport Extreme (e.g. USB harddrive).What are you doing to change it to a static channel? I've been having this same problem and have tried going to Network Settings>>Advanced>>TCP/IP>>Configure IPv4, changed setting to "Using DCHP with manual address", and changed the IP address to an available ip. I've done this a lot of times before I had the monitor problem to solve the IP conflict problems I get sometimes on my network, but this didn't fix the external monitor issue. Is there something else I should be doing? Thanks
-
I drop my iPod and the screen got 4 tiny lines across the screen . The warranty covers this damage ?
Apple does have an exchange program which would allow you to exchange your ipod with an alike one, for a price.
The i pod you would receive in return would be a refurbished one. Here is a link to an Apple pricing page which will allow you to see what it would cost you, if you choose to partake in this program.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipod -
The camera on my iphone4 opens up but seconds after the screen turns black with white line.
Hi guys! Please help me I have iPhone 4 .the camera although opens up when I press the button, but seconds after the screen turns black with white line. Need I need it repaired or there is some trick which can set it right.?
-
My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?
Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i -
How to update the editor properly after the source types change??
Dear all;
i'm using LLBLgen tools (o/r mapper tools) which helps me to create my BLL layer;
recently i have upgraded from vs 2008 to vs 2013 and i got the following bug :
strange thing i have noticed is that if i tried to make any changes in db and updated it in llbl application then visual studio (after clean and rebuild the solution ) recognize changes only in the code behined editor but in the design editor if i
tried to put gridview control and tried to populate it using LLBLdataSource control then the gridview control load old fields not the new ones
why this problem keep happening in the design editor but fixed in the code behind????
so i tried to post this bug in LLBLgen forums and i got the following response :
" the datasource controls sometimes act weird because vs.net doesn't update the editor properly after the source types change. This is unfortunately a problem related to the ASP.NET tooling for webforms.."
so any idea on how to fix this issue
thanks
Tamer El MorsiAs your issue is related to ASP.NET and web forms, I suggest you visit the Microsoft ASP.NET site (link below) and post in a topical forum there:
http://forums.asp.net/ -
ODI Client cannot connect the datebase after the datebase IP changed
ODI Client cannot connect the datebase after the datebase IP changed.
1,the datebase on mac A,the mac changed ip
2,on the client, tnsping db is ok.
3,use pl/sql ,can connect on the db
4,with odi,changed the repostry URL to the new db IP,throw the exception below
java.sql.SQLException: Io Exception: The Network Adapter could not establish the connection
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:274)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
at com.sunopsis.sql.h.run(h.java)
Is anything we need to config after change db machine IP?yeah,I got it.Everything is ok now.
After change IP,we must open TopologyManager:change the JDBC connection of workrepository which must chose in Designer.
when we open the Designer ,it will connect to db.then coonect to workrepository with original IP.So,we must rechange workrepository's JDBC first! -
SECATT not saving the screen for change of address in CAA2
Dear Secatt Experts
When recording the transaction CAA2 using TCD(Record) in SECATT, the
screen for change of address in the main screen of CAA2 is not getting
saved. Therefore I am unable to run the script for change of address
The address can be changed (Fix any address other than standard address)
by using F4 function in the address field in the main screen.
Please help
Best Regards
VenkatHi Venkat,
It should work fine with SAPGUI recording. So please try this.
Hope it helps.
Regards,
Ananth. -
I am facing a problem and I am not sure if its a graphic card malfunction. When I open applications like Chrome, VLC player, and most apps, my display suddenly changes color. It is as though the Theme was changed. The normal grey panel on opened windows turns to light blue and everything else seem as though there is a light blue layer on top of it. When I close these applications (quit) the display returns to its normal self.
My MacBook Pro is 2 years old, and I have an extended warranty. Will Apple replace my graphic card if it is actuall the graphic card's problem?I had that problem, too, and it's been documented both here and on the Adobe forums. What happens is that when you have dynamic switching on, when an application that uses your discrete GPU kicks in, the screen will change color. My problem lasted for a couple of weeks then just vanished.
What you need to do is download Cody Krieger's gfxCardStatus and turn off dynamic switching and leave your GPU set to discrete only. That's the only fix that I know of at this time. I don't know why it happens or why mine stopped.
Good luck,
Clinton -
Is there a way to make the icons/words larger on the screen without changing the screen resolution?
If you right-click in the top of title bar of any Finder window there is an option to un-check 'use small icon size', though toggling between the two makes little difference on my screen.
Another trick is you can zoom the whole screen by holding down the 'control' key and using a two-finger swipe up on the trackpad to enlarge, down to go back to normal.
Maybe you are looking for
-
This is very fustrating I have tried a few different things I have seen on-line and nothing is working. My itunes is version 11.1.3.8 and my ipod touch is ios version 6.1.5. Since last Christmas I have a playlist called Christmas songs and I would
-
How can I take data from specific column in a table using VBA
Hi I do not know how to take the values from the last column in a table, I know how to look over each row but I cannot take the last column values for each row I pass by. This is the table for example: | Date | Account1 | Account2 | Description | Amo
-
How to configure HTTPS in the receiver HTTP adapter ?
Hi Guys, How to configure HTTPS in the HTTP receiver adapter and where i need to mention the QOS=BE in the receiver adpter. any suggestions or help would be appreciated Thanks, Srini
-
XML VALIDATION WITH EXTERNAL DTD
I've the following problem: I've stored a dtd into the xdb repository(with createresource function) and all seems work. In this DTD i've declared some element and one entity in this way : <!ENTITY emsp " " ><!--=em space--> When i try to store or ext
-
Material Design for bonded and non-bonded warehouse
In some countries the materials put in bonded and non-bonded warehouse are treated differently, for example the cost, shipment, trace of the material. In general, there are two designs. One is "Only One Material Number", and the other is "Two materia