After this install product says not latest install. Reinstalling does not help.

Have latest download installed. On boot up get message not latest program. When asked do I want toupdate, I check yes.
Get new features screen.
When I leave this screen still get into loop of saying not latest etc

This - http://www.google.com/firefox - is the old Firefox Start Page used by the Firefox 3.6 and earlier versions of Firefox. I don't think it is being maintained by Google and Google assumes that you are using an older version of Firefox.
Starting with the Firefox 4 version, Firefox is using a "local" Start Page with the address of '''about:home'''. It looks similar to the old Start Page, but it isn't exactly the same.

Similar Messages

  • HT4623 Just installed IOS 6. Now when I try to check email om Yahoo I get this, MFMessageErrorDomain error 1032. What should I do. Just got the iphone4, after this wish I had not.HELP!!!

    Just installed IOS 6. Now when I try to check my email on Yahoo I get this error. MFMessageErrorDomain error1032.
    Just got this phone, now wishing I had not......HELP!!!!
    Read in net to uninstall Yahoo mail and reinstall....DID THAT, still same.

    Hi there,
    Do you have icloud account? You need firstly turn off find my iphone (by go to icloud.com -->sign in --> go to "Find my iphone" and erase your iphone in it). And then you restore your iphone with DFU mode.
    When you erase your Find my iphone and if you can not restore, your iphone has a problem with hardware.
    Some infos can help you.
    Kind regards,

  • I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing.

    Received this error message when starting iTunes and reinstalling does not resolve it:  The registry settings used by iTunes drivers for importing and burning CDs and DVDs is missing...
    Can I uninstall existing iTunes without losing my media library?  and then install fresh to fix this problem?

    Hi there kweitkamp,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    -Griff W. 

  • Whenever i try to open my after effect it just says error 15 n dont work plzz help me out

    whenever i try to open my after effect it just says error 15 n dont work plzz help me out

    We cannot know. you are not telling us anything about your system, what kind of project, what footage etc. We don't even know what version of AE!!! In any case, run the Creative Suite Cleaner Tool, reinstall the program. If the issues persist, we realyl need a lot more info to help you.
    Mylenium

  • Who have problem with your bootcamp after this instalation?

    I use VMware software and after the instalation i receive this advertise:Cannot open the disk/Users/leofernandoz..../Libary/Application Suport/VMware Fusion/Virutal Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmdk"or one of the snapsohot disks it depends on.
    Reason: The partition table on the physical disk has changed since the disk was created. Remove the physical disk from the virtual machine, then add it again.
    What the best and easiest solution for it?

    There is nothing on Fusion Community in  the way of FAQ regarding Lion and bumping Windows partition +1 ( due to presence of a recovery partition added0.
    A quick check of VMware Fusion turns up a thread or two (-:
    Boot Camp partitions may not be accessible through Fusion after upgrading to Lion.
    To work around this issue, delete the Boot Camp virtual machine from the library and recreate it. For more information, see
    A Boot Camp virtual machine fails to power on with a disk error (1003483).
    A Boot Camp virtual machine fails to power on with a disk error (1003483)
    VMware Fusion 3 support for Mac OS X Lion (10.7) (2003715)
    VMware Communities: Fusion 3.1.3 and OS X Lion
    There may be other issues with Windows and changes that need to be addressed to dual boot Windows natively.

  • I keep getting a display message saying this cable or accessory is not capitiable with this apple product may not be reliable with this iphone even when i have no cable or accessory in use

    My iphone 5 has been saying this for days now. Yes I have recently purchased a motorola ear piece for easy talking while walking, but i have also used a 10ft cord purchased at walmart for months now and no display before the motorola. now even without anything plugged in ,I still get the display message on my phone saying" the cord or accessory is not capitable with this iphone and may not be reliable with this iphone.
    what DO I do ?! is there something I can do without going to either Sprint or Apple for help.... will this be damaging to my iphone ?! HELP before its too late.
    sincerely,
    Apple lover JAJA

    Try resetting your iPhone.  Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
    CAUTION - This may get rid of the warning for now, but the issue the warning points out still remains.  One or both of your cables is certainly suspect.

  • After Fresh Install CMS does not start

    Hello BO Gurus,
    I have got  a blank Installation of BO 4.0.
    At Install CMS does not start.
    I have got a:
    - BO 4.0
    -Windows 7 Server Enterprise, SP1
    Trace shows:
    ....Server MSMYSERVER3:6400 ... was not found or is possibny down....  (FWM 01003) Connection refused: connect
    ...Is the CMS alive? Ensure the CMS supports SDK version 1400
    How to start CMS ?
    Which Username to take to start CMS ?
    What is SDK version 1400 + ?
    Where to get SDK version 1400 + ?
    Thank You !
    Best Wishes
    Martin

    Could also be a database connection issue.
    What database are you running?
    We've had an issue where the database (MSSQL) was hosted on a seperate server and where Windows Authentication was used. To resolve the issue, we had to change the Server Intelligence Agent (SIA) service to start with the Windows/domain account.
    Regards,
    CJ

  • Stuck workflow after crash - SWPC is also not helping

    Hi Guys,
    There are some instances for a particular workflow background task which stucks and stops the workflow processing.
    This problem is not with all the instances.
    We have executed SWPC also but that is also not helping to solve our problem.
    Workflow administrator has to execute it 4-5 times to resolve this problem.
    After executing the SWPC the workflow log is updated with tRFC entries as shown below:-
    Workflow log is updated with following
      Background Processing Started            06.08.2009 12:04:51 tRFC Entries         0A126A2E03F14A7AAAC3004700000...
    Please provide us the possible solutions which can reduce this problem.
    Thank you.
    Regards,
    Guru A

    Check whether WF-BACTH or workflow administrator user is locked . Try to unlock it and check

  • I've lost my yahoo email access on playbook and yahoo says it's BlackBerry's doing - please help

    It's now day 2 of no playbook mail. I kept getting a yellow triangle saying yahoo account not available or couldn't access. The yahoo site says blackberry has done this and blackberry  is working to resolve - is this true ?? If so it seriously sucks, as my internet provider is Rogers, just like many people, and Rogers uses yahoo mail. Can someone p,ease confirm and help with thus? B TW:  my iPod email is working fine, so its not my Rogers/yahoo email that's the problem. Thanks for your help, Carolxi

    carolxi wrote:
    Hi TroyTempest, here is the reply link you asked for from yahoo. My issue is how to regain my e-mail. I have outlook on my pc, but Rogers has this downloaded from the yahoo account anyway, so I can't figure out how to fix this. I would be extremely grateful if you could help, perhaps list steps if there is an answer? Thanks so much.
    http://help.yahoo.com/kb/index?page=content&id=SLN5817&actp=search&viewlocale=en_CA&searchid=1351274...
    That article was last updated March 16th 2012.  I don't think we would have put up with this problem for that time would we???
    All you can do is delete the account and add it back taking care with the account details.
    If people with Rogers email accounts say their Playbook works fine then it ain't the Playbook OS, it's the way it interacts with Your playbook and Your Rogers account.  It's in the settings I would think, but everybody with email problems should delete and re-add as first line of attack. 
    A four legged friend, a four legged friend.... (or is that a different Rogers?)

  • After downloading, install software does not see the internet.

    Has anyone dealt with this issue,  Please advise.

    Go to system prefs>security and privacy>firewall and make sure that PSE is allowed out.

  • Lightroom 5.2 won't open after "successfully installed" - can anybody please help me understand why?

    Hi everyone
    I've bought and downloaded Adobe Lightroom 5 for a new iMac 27" intel core 5 3,4 GHz. The machine is only three days old and no more updates are to be found when searching for it. However; after the message that "lightroom 5 has successfully been installed" I don't get to open the program. So I never get to the point where I can register the serial number / registration key for purchased product.
    I've followed the instructions that comes with Lightroom 5, but no luck. Also tried to uninstall and reinstall.
    No secret that I'm total incompetent when it comes to understanding of computers and software....
    Hope someone can help me understand what I'm doing wrong, and sugest some good solutions :-)
    Thx

    I think you may need to uninstall and then start over. There is no installer on the Mac for Lightroom so select it in Applications and send it to the trash.  I suggest you download again from a different source. You can use the link below to download the free trial and then validate the software after installation with your product serial number. Ensure you choose your language version and MAC platform from the dropdown list at the top of the page.
    After you click download it starts by downloading or updating (replace) the Adobe Download Assistant. You then browse the products and select Photoshop Lightroom 5 to start the installation.
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom&promoid&promoid=D TEML

  • Installation issue : imac lagging after Leopard install...please help :)

    Hey all,
    So I upgraded my sisters imac g5 (not intel duo) 512mb ram with Leopard recently. The installation completed and booted into OS X. However, the good old spiral continually spirals and never stops and I could not access my hard drive via Finder. I could access applications like Firefox just fine. I took it to the genius bar and they were able to archive & install and everything seemed fine. Unfortunately, ever since this the computer has severely lagged and I really don't know what to do. If you have any advice for me I would greatly appreciate it. I feel bad for my poor sister, being that I am several thousand miles away right now and cannot help directly. Thanks in advance!!
    Josh

    Yep, meeting the minimum requirements will get you minimum performance. A machine that runs Tiger great may not be able to keep up with all the new code in Leopard.
    CockTail is just another utility program that I keep around. I leave my computers running 24/7 so I don't need to worry about the daily/weekly/monthly maintenance scripts. They used to be called cron tasks, but are are being handled by launchd. They run very early in the morning and if the computer is not running, they may not run very often.
    Cocktail can run them manually without you having to resort to terminal commands. It can also give you access to several other utility type settings like enabling journaling, deleting DS Store files, tweaking network transmission settings, showing hidden files, and many other settings that you can work with in Terminal if you want.
    Use it sparingly.

  • System went down after this message Client is not known to the mess server

    Hi Guru's,
    I am running 4.6c on Ora 8i, Windows 2000 Server. We have 1 application server. The central instance and DB is on same host.
    <b>Initially i got following error message 2 times in the system log reading:-</b>
    No free memory available in class PERM . Memory block ID "abtsv2", 958955044 bytes
    <b>After above message I got an information message Continuously 30 minutes in the system log reading:-</b>
    Client cinsapp1_PRI_00 is not known to the message serve
    <b>Then stoped the workproccess one by one</b>
    Stop Workproc 5, PID 4800
    Stop Workproc13, PID 4468
    Stop Workproc18, PID 4508
    Stop Workproc11, PID 4452
    Stop Workproc14, PID 4476
    Stop Workproc12, PID 4460
    Stop Workproc17, PID 4500
    Stop Workproc24, PID 4560
    Stop Workproc23, PID 4552
    Stop Workproc25, PID 4576
    Stop Workproc10, PID 4444
    Stop Workproc16, PID 4492
    Operating system call recv failed (error no. 10054)
    Operating system call WSASend failed (error no. 10053)
    <b>Finally R/3 system was stoped.</b>
    Please let me know the process how to check the trace for this problem. If any body got same problem please suggest me how can i resolve this problem.
    Thanks in advance,
    Ramesh

    Hi Experts,
    How you fixed this issue, Please share with us.
    because i am also facing the same problem in one of our SAP server.
    Thanks & regards,
    Pandiyan

  • My MacBook pro stop working and it shows folder with question mark after this update,  it's not my fault,  Apple should solve the problem with out ask me to make payment

    After updating my MacBook pro it shows only a folder with question mark on it
    It is not my fault, Apple updates problem
    They should solve it fir me without make any payment
    Thanks

    Try starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume

Maybe you are looking for