After transport, changes are not updating

hi..........
We are configured two clients as master client(009) and test client(008) in one DEV machine.
i performed one transport from 009 to 008.( i released through scc1 and imported in 008 through scc1) it's transported successfully.
but our consultant saying that, those changes is not updating in client 008.
i performed so many transports to 008 and also to prd. before and after.
then why the changes were not updating in 008, to that particular request?he created another request with the same issue and i transported it.again same problem. is there any thing to check from basis side?
(4.7E,mssql,widows 2003 server)
Please help me.................

Hello,
Check the transport log. Even it is saying Sucessfully Imported, just open it, read it.
And check the size of the transport request also.
And another option is add this particular request with another request and transport it. Check for anything is happening....
I don't think anything balance has left from basis side....
Note: Points always encourage me to reply !!

Similar Messages

After transporting changes are not happening

Hi All,
As per the requirement we need a change in the pricing procedure ZJEXPS
(Export Sales Switch). We made the changes in transaction code V/08.
But after transporting the request to quality server, changes are not reflecting there.
I had checked the request number all the tasks are there and transport was completed with warning.
our consultant created another request and then also after transporting changes are not reflecting.
How it is happening particular to this request?
How to trace this? Kindly suggest me.
(Ours is two system landscape with master client 009 and quality client 007.I am trying to transport to 007)
Regards,
Nagendra.

Hi
Check the import logs. If you are getting warnings that original objects cannot be replaced. You need to import the change request in unconditional mode. During performing imports select option, overwrite originals.
Some times the requests contain the objects, which are original to the target system, e.g SAP standard objects.
Check if this could help you.
Regards
Rahul

After transport changes are not immediatly avalable

Hallo.
When I import a transport request in our TES system, the changes are not immediatly available but we have to wait some minutes.
Why this?
Could you help me?
Thanks.
Mario

Hello Mario,
1. If you are working with old level of kernel and transport tools (tp and R3trans). if yes update these immediately.
2.if transport tools are new and updated then the problem is due to Buffer Synchronization :
After the transport, the changes are not done in the database level and not reflecting immediatly in the TCODE. And after some you are able to see the changes.
If this true, the the problem may the sync of the buffers. Try by executing /$sync after import. Which resets the buffer and next start of tcode buffers the program again.
Please check the settings of the profile parameter rdisp/bufrefmode is as per the note 1163741.
"If the changes are there after some time, then this is most probably a buffering issue. rdisp/bufreftime and bufrefmode can be checked but also DDLOG issues might be relevant.
Check whether the following parameters are set correctly.
rdisp/bufrefmode = sendoff, exeauto
rdisp/bufreftime = 60 (or less)
Best Regards
Niraj

After transport changes are not reflecting to other users

HI all it's urgent
One user abcd who had made some changes to some screens is not reflecting to other users after transport we have 2 clients 100 and 200 changes are reflecting in own user id we transported with scc1 transaction
with regards
vinod

I am not a developer, so pardon me if I misunderstood this question. I thought screens and other repository objects are client independent. That means the change should be evident in all clients without a need to transport.
Is this to do with security by any chance ( though it seems unlikely )? Can the other users see the change in the original client in which the request was made? That should help you determine whether the problem lies with the transport or outside. Also you can check the contents of the transport in SE01 and see if it holds the kind of data that you are expecting it to. I am guessing you have already generated the screen after saving the changes.
Hope this helps,
Sanket

Changes are not updating :(

Hi-
For the past few days, after I save changes (and these are simple text changes) they are not showing up on my webpage. The upload seems to be a little slow lately, but I'm not getting any error messages......it says it has uploaded. But....my changes are not there
Is anyone else experiencing this??? Any advice???
Thanks!

yes, empty your cache as kabing said!
a cache saves files from your website when you visit it often - therefore it loads faster. yet when you make changes to your website - they are then not recongnized and the old page is still showing!
so my advice, empty your cache everytime you publish!
max

Bid invitation changes are not updating

hi
when im creating a bid invitation and publishing the bid ,and when im changing the partner ie requester
and it publishing the same bid invitation its showing the same partner ie the prevoius requester
please help to solve this problem

Hi ,
Actually we cloned standard bid process (bus2200) to PP process and when we r working with
standard bid process with stragic purchaser role and making changes to published bid , the changes r updating but in pp proceess the changes r not updating
pls help me i will be thankfull to u
Edited by: eswar syam on Jan 14, 2009 10:05 AM

My website changes are not updated in my folder

I make changes to my website in IWeb, and when I save it to my folder, it is not updating. Nothing happens. I cannot figure out how to get it to properly save the new changes so I can update the actual website.
Please help.
Thanks

When you publish to a local folder, are you testing the site by double clicking the index.html file to launch it in the browser?
Make sure you empty the browser cache, hit the refresh button or add a ? to the end of the URL to get the latest version.

Changes are not updating in infotype 588

Hi,
In 0001 subtype of infotype 0588 , when i try to copy the record into another or change the record,
i am changing the ESI Number ,but this new number is not updating. It is updating with same old number.
What may be the problem?
This problem is coming when i try to create the new record by copying the existing one.
If i create new record normally then it is working fine.
Thanks,
Mamatha

hi,
I am not copying the infotype. I am copying the record of 588 infotype to create the new one.
thanks and regards
mamatha

Changes are not updated in Vistex BSP application

Hi Friends,
Iam working on VIstex BSP Applications. I have a problem with data update.
I create a new Agreement Request using existing Agreement in BSP. In the Agreement Request I have different Rules and each Rule has some records in it. When I click on Save, initially all the records are alloted a temporary variable $$000000XX (XX is some number). After Save, from the Number Range object, these records are alloted permanent numbers. Up to here it works fine. When I go to any of the Rules tab and add a new record to that then this record is not saved properly. I mean when i go to the ECC (backend), it shows the newly added record, but when i click on the same tab again in BSP i could see in debugging, that
the record still has a temporary number to it. So it always inserts a duplicate record in ECC.
The issue is after i add a new record in BSP, Save the Agreement Request and come out of the transaction, then it saves properly. But when i add the record, Save and go the same tab again and change something to the newly added record, it is creating duplicates. And this is because it is not saving the record properly.
Also if I just come out of the BSP page and load it again after clicking on save, the save is done properly and no duplicates are created if i modify the newly created record.
Any suggestions to solve the issue will be appreciated.
Thanks & Regards,
Raju
Edited by: Narayana Raju Sampathirao on Oct 6, 2009 3:02 AM

Looks It's a Refresh issue part of BSP

InCopy changes are not updating assignments in InDesign?

I work for a magazine and have been having trouble with InCopy and InDesign. When the editor changes any text in InCopy, it sometimes does not appear on my end in the InDesign file. When I open the document and the message: "This document contains links to sources that have been modified. You can updated the modified links now, or update them later using the Links Panel." , I hit "update links" and either it just doesn't or everything disappears. How and why would this be happening? Is there some kind of setting I'm missing?
Has anyone come across to a similar situation?

What version of InCopy and InDesign are you using? Are they both the same version? Also, this sounds a bit like a server-related issue. How is your network speed? There's a lot of moving parts here so we need to try to isolate the issue. Can you provide some more details regarding your setup and if this problem started occurring all of a sudden or if you've been experiencing this issue from day 1.

Changes are not updated from ECC to CRM How to debug

Hi,
QCs 1140049726 and 1140047459 were updated in P20 system to remove the WBS. This was done per normal P20 process and instructions. P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
CSP still shows these QCs as having a WBS assigned to them. This is incorrect. It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
How to proceed with it. How to debug from ECC to CRM.
Prem.

Hello Prem,
Could you please have a look at SAP note 656823?
This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
Hope this could be helpful.
Best regards,
Maggie

Changes are not updating in Poplist

Hi All,
I have a poplist item in advanced table (table action). For the first time it displays correct data from database. I am updating the table which is associated with the poplist item. After save the data, poplist is not displaying saved data. But it is displaying previous data.
when i execute VO query i am getting saved data, but in poplist its displays previous data.
I need to display saved data.
Can any one tell me how to solve this?
Regards,
Babu

Have u disables JVM caching in poplist?If u have no idea what I am talking about I would suggest to go through old threads.
--Mukul

Mac Contacts changes are not updated on iCloud

My Mac and iPad are both linked to iCloud. Almost everything syncs perfectly. In Contacts I can make changes/additions on the iPad or in iCloud on the web, and the changes propagate to the others, including the Mac.
HOWEVER, if I make changes to Contacts on the Mac, they do NOT appear in iCloud or the iPad.
What do I need to check to find the problem?

Welcome to the Apple Community.
This user tip might help you understand how accounts work with Contacts (Address Book).
First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.

Changes to BI web templates are not updated

Hello BI Experts,
I need to find a way to advise my portal resource on how to resolve a problem we are experiencing.
When we make a change to a web template, the changes are not updated and it appears that the old version is cached. The only way we can get the new template to show is to bounce EP.
Does anyone have suggestions where we can find the appropriate global settings to set the cache so that EP will retrieve new BI content as it is modified?
Thanks in advance for any help.
Tom

Hi Tom,
If there is some incorrect setting in the portal, the WAD templates does not get saved after the first Save action.
I am not sure of the setting which needs to be done. But I can provide you an alternate solution. If there is no other issue than the templates not getting saved, you can use this.
You can save your changed template using 'Save As' in a different name and then you can delete the original template. Afterwards, you can save this template with the actual name.
I hope this would solve your problem.
Regards,
-Neethu

Changes are not reflecting in QA after transport

Hi Everyone,
I am having an issue with the transport in PI. After making the changes in development, i exported the tpz file to Quality. The changes got reflected. Then for testing purpose some changes were done in the Quality IR. Now i again exported the tpz file from dev to QA. But the same changes are not reflecting.
Has anyone faced such a problem? Need your help experts.

Hello,
Check in IR > Environment> cache status overview. Is it in green status??
Check if the import of .tpz file is successful in quality IR??
>>Then for testing purpose some changes were done in the Quality IR
Also, check if there are any conflicts in the IR of quality system??
-Rahul

After transport, changes are not updating

Similar Messages

Maybe you are looking for