After transports, find many InfoObjects are inactive!
After all transports are done. Find inside any Transfer Rule, source system/datasource fields are blank (We have asked BASIS to do the source system name mapping settings already). I manually assign the source system/datasource and find many InfoObjects are marked with red tick "X", then I realize that these InfoObjects are inactive.
You guys may know that BW InfoObject dependencies are very complicated. Just wonder how you guys collect all these InfoObjects for transports.
I find a way of massive activations of all InfoObjects manually, but in this way, the Change Request window pops up to prompt you to create change request and I don't the authorizations to create CR on PROD.
Any idea?
Thanks
Hi Kevin,
you can not activate the BI contents in the production server. The procedure is to activate them in Dev, move them to QA. Test them in QA and on successful testing, move them to production. This way, you need to create a CR in dev system and move it all the way to Production system.
As you rightly mentioned, you need to maintain the dependencies while transporting the BW contents. I would suggest you follow the following steps.
1. Transport the datasources.
2. Replicate the data sources.
3. TRs, CS, Info Objects, UR and then infoproviders.
This way, you should not ahve any problem. Hope this helps.
Thanks and Regards
Subray Hegde
Similar Messages
-
How to find users who are inactive.
Hi I want to find users who left the company. I ran program rsusr200 in se38 but not understanding which option will clearly give me the invalid users. Also i had a doubt. Does users with password deactivated that the user left the company.
Thanks in Advance for your helpThe "password" field in this report will not necessarily show you users who have left the company. The password may be be "active" since this is a new user and they have not yet logged on. You would need to compare as well the field "Created On". I would use the last logon field as an indicator of who may have left - if someone has not logged on in 90 days, that could be an indicator.
-
After 2:39 many songs are silent for the rest of the time.
This only happens on my new iPod touch 32gb, not when I play the same songs in iTunes or another iPod. It is always at exactly the same time, and there's no connection between the songs that it happens with.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
After deployment MQ 6.0 drivers, JMS channels are Inactive
Hi
I have deployed MQ 6.0 drivers on PI 7.1. And after my JMS communication channels are Inactive.
The status is showing in rwb is ..
"Channel Has Internal Error"
"Adapter has not provided any status information about this channel"
"Exception: Channel with Status Unknown or Not Registered"
I am unable to understand whether it is development issue or basis issue. Please provide solution on this.
I have cross checked below things and everthing fine
1. I have modified the CC configuration w.r.t PI 7.1also.
2. Cache full refresh is working fine
3. Vendor 7 MQ jar files are placed correctly after deployment in below folder
/usr/sap/SID/Instance/j2ee/cluster/bin/ext/com.sap.aii.adapter.lib/lib
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
4. SICF services are activie.
Thanks & Regards
Sudhakar Meriyalaconfirm if the deployment was done as specified in Note 1138877 - PI 7.1 : How to Deploy External Drivers JDBC/JMS Adapters
Also try to stop and start the adapter if the configuration details given are correct in the adapter -
DTP are inactive after System copy
Hi Guys!!!
I have done a system copy from one sbox another. After that all the DTP are inactive after System copy.
Please help me in this regard.
Thanks in advance
Peter..Hi,
If u copy the transformation get inactive, bcoz it has changed from existing target to new target.
so need to activate all.
Hope it helps u,
Thanks -
What are the objects that goes inactive after Transportation
Hi,
Usually,What are the objects that goes inactive after Transportation?
If you have any links for tranportation ,please send.?
Regards.,
Naresh.HI,
the main reason for most of the transports to fail is:
1)Transporting each and every object in the same transport request.
Ideally,
u2022The Infobjects should be transported first in a separate request.
u2022Then the Data source and the Info providers (Cube, ODS, Data source and Multiproviders) together in a separate request.
u2022At the end the transformations and the DTPu2019s in an another separate request.
If the above mention sequence is followed while transporting the transport failures can be avoided.
2)Also when a change is made to an ODS (I object added or deleted) it should again be transported along with the transformation but in separate request.
I.e. the ODS 1st and the transformation.
Hope this helps.
regards,
mahesh. -
I tried re-installing Firefox - no change. From Internet Explorer all buttons are active - this only happens in Firefox. 'Some' buttons on 'some' sites are active. But most buttons are inactive - the cursor placed above the button does nothing.
Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause this issue. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Having issues finding out how many bytes are sent/recieved from a socket.
Hello everyone.
I've searched the forums and also google and it seems I can't find a way to figure out how many bytes are sent from a socket and then how many bytes are read in from a socket.
My server program accepts a string (an event) and I parse that string up, gathering the relevant information and I need to send it to another server for more processing.
Inside my server program after receiving the data ( a string) I then open another port and send it off to the other server. But I would like to know how many bytes I send from my server to the other server via the client socket.
So at the end of the connection I can compare the lengths to make sure, I sent as many bytes as the server on the other end received.
Here's my run() function in my server program (my server is multi threaded, so on each new client connection it spawns a new thread and does the following):
NOTE: this line is where it sends the string to the other server:
//sending the string version of the message object to the
//output server
out.println(msg.toString());
//SERVER
public class MultiThreadServer implements Runnable {
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
//setting up sockets
Socket outputServ = null;
//create a message database to store events
MessageDB testDB = new MessageDB();
try {
//setting up channel to recieve events from the omnibus server
BufferedReader in = new BufferedReader(new InputStreamReader(
csocket.getInputStream()));
//This socket will be used to send events to the z/OS reciever
//we will need a new socket each time because this is a multi-threaded
//server thus, the z/OS reciever (outputServ) will need to be
//multi threaded to handle all the output.
outputServ = new Socket("localhost", 1234);
//Setting up channel to send data to outputserv
PrintWriter out = new PrintWriter(new OutputStreamWriter(outputServ
.getOutputStream()));
String input;
//accepting events from omnibus server and storing them
//in a string for later processing.
while ((input = in.readLine()) != null) {
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.println("Event from: "
+ csocket.getInetAddress().getHostName() + "-> "
+ input + "\n");
System.out.println("Waiting for data...");
//---------putting string into a message object-------------///
// creating a scanner to parse
Scanner scanner = new Scanner(input);
Scanner scannerPop = new Scanner(input);
//Creating a new message to hold information
Message msg = new Message();
//place Scanner object here:
MessageParser.printTokens(scanner);
MessageParser.populateMessage(scannerPop, msg, input);
//calculating the length of the message once its populated with data
int length = msg.toString().length();
msg.SizeOfPacket = length;
//Printing test message
System.out.println("-------PRINTING MESSAGE BEFORE INSERT IN DB------\n");
System.out.println(msg.toString());
System.out.println("----------END PRINT----------\n");
//adding message to database
testDB.add(msg);
System.out.println("-------Accessing data from Map----\n");
testDB.print();
//---------------End of putting string into a message object----//
//sending the string version of the message object to the
//output server
out.println(msg.toString());
System.out.println("Waiting for data...");
out.flush();
//cleaning up
System.out.println("Connection closed by client.");
in.close();
out.close();
outputServ.close();
csocket.close();
catch (SocketException e) {
System.err.println("Socket error: " + e);
catch (UnknownHostException e) {
System.out.println("Unknown host: " + e);
} catch (IOException e) {
System.out.println("IOException: " + e);
}Heres the other server that is accepting the string:
public class MultiThreadServer implements Runnable {
Socket csocket;
MultiThreadServer(Socket csocket) {
this.csocket = csocket;
public void run() {
try {
//setting up channel to recieve events from the parser server
BufferedReader in = new BufferedReader(new InputStreamReader(
csocket.getInputStream()));
String input;
while ((input = in.readLine()) != null) {
//accepting and printing out events from omnibus server
//also printing out connected client information
System.out.println("Event from: "
+ csocket.getInetAddress().getHostName() + "-> "
+ input + "\n");
System.out.println("Lenght of the string was: " + input.length());
System.out.println("Waiting for data...");
//cleaning up
System.out.println("Connection closed by client.");
in.close();
csocket.close();
} catch (IOException e) {
System.out.println(e);
e.printStackTrace();
}Here's an example of the program works right now:
Someone sends me a string such as this:
Enter port to run server on:
5656
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=5656]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4919,localport=5656] connected.
hostname: localhost
Ip address: 127.0.0.1:5656
Waiting for data...
Event from: localhost-> UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1",424,"9.27.132.139","","Omnibus","Precision Monitor Probe","Precision Monitor","@busch2.raleigh.ibm.com->NmosPingFail",5,"Ping fail for 9.27.132.139: ICMP reply timed out",07/05/07 12:29:12,07/03/07 18:02:31,07/05/07 12:29:09,07/05/07 12:29:09,0,1,194,8000,0,"",65534,0,0,0,"NmosPingFail",0,0,0,"","",0,0,"",0,"0",120,1,"9.27.132.139","","","","dyn9027132107.raleigh.ibm.com","","","",0,0,"","","NCOMS",424,""
Now my program makes it all nice and filters out the junk and resends the new string to the other server running here:
Enter port to run server on:
1234
Listening on : ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=1234]
Waiting for client connection...
Socket[addr=/127.0.0.1,port=4920,localport=1234] connected.
Parser client connected.
hostname: localhost
Ip address: 127.0.0.1:1234
Event from: localhost-> PacketType: UPDATE , SizeOfPacket: 577 , PacketID: 1, Identifer: UPDATE: "@busch2.raleigh.ibm.com->NmosPingFail1" , Serial: 424 , Node: "9.27.132.139" , NodeAlias: "" , Manager: "Omnibus" , Agent: "Precision Monitor Probe" , AlertGroup: "Precision Monitor" , AlertKey: "@busch2.raleigh.ibm.com->NmosPingFail" , Severity: 5 , Summary: "Ping fail for 9.27.132.139: ICMP reply timed out",StateChange: 07/05/07 12:29:12 , FirstOccurance: 07/03/07 18:02:31 , LastOccurance: 07/05/07 12:29:09 , InternalLast: 07/05/07 12:29:09 , EventId: "NmosPingFail" , LocalNodeAlias: "9.27.132.139"
Lenght of the string was: 579
The length of the final string I sent is 577 by using the string.length() function, but when I re-read the length after the send 2 more bytes got added, and now the length is 579.
I tested it for several cases and in all cases its adding 2 extra bytes.
Anyways, I think this is a bad solution to my problem but is the only one I could think of.
Any help would be great!(a) You are counting characters, not bytes, and you aren't counting the line terminators that are appended by println() and removed by readLine().
(b) You don't need to do any of this. TCP doesn't lose data. If the receiver manages get as far as reading the line terminator when reading a line, the line will be complete. Otherwise it will get an exception.
(c) You are assuming that the original input and the result of message.toString() after constructing a Message from 'input' are the same but there is no evidence to this effect in the code you've posted. Clearly this assumption is what is at fault.
(d) If you really want to count bytes, write yourself a FilterInputStream and a FilterOutputStream and wrap them around the socket streams before decorating them with the readers you are using. Have these classes count the bytes going past.
(e) Don't use PrintWriter or PrintStream on socket streams unless you like exceptions being ignored. Judging by your desire to count characters, you shouldn't like this at all. Use BufferedWriter's methods to write strings and line terminators. -
ADF: Best way to find out how many rows are fetched?
Hello,
I have overridden method executeQueryForCollection of ViewObject in which I execute supper.executeQueryForCollection and after that want to find out how many rows are fetched during the execution.
If I try to use getFetchedRowCount I always get "0", if using getEstimatedRowCount, query are being re-executed.
What method is better to use for that?
Thank you,
Veniamin Goldin
Forbis, Ltd.I have a 'home-made' view called RBS, whose definition is this:
create view RBS as
select /*+ RULE */ substr(s.username,1,10) oracle,
substr(case when s.osuser like 'oramt%'
then nvl(upper(s.client_info),'client_info not set')
else substr(s.machine,instr(s.machine, '\')+1,length(s.machine))||':'||s.osuser
end
,1,20) CLIENT
, substr(''''||s.sid||','||s.serial#||''''||decode(s.status,'KILLED','*',''),1,12) kill_id
, lpad(to_char(t.xidusn),4) rbs#
, lpad(to_char(t.used_ublk),4) ublk
, lpad(to_char(t.used_urec),8) urecords
, i.block_gets
, lpad(to_number(round((sysdate - to_date(t.start_time,'MM/DD/YY HH24:MI:SS')) * 60 * 60 * 24)),9) time
, upper(substr(s.program,1,20)) PROGRAM
, to_char(s.LOGON_TIME,'HH24:MI:SS DD-MON') LOGIN_TIME
from sys.v_$transaction t
, sys.v_$session s
, sys.v_$sess_io i
, sys.v_$process p
where s.saddr = t.ses_addr
and i.sid = s.sid
and p.addr = s.paddr
/By monitoring the URECORDS column value of the row that corresponds to my session doing a transaction, I can see how it progresses.
Toon -
Infospoke inactive after transport
Experts,
In version 3.5, I have created an infospoke with transformation and unit tested in Dev box. After transport I have got an error 8 while importing in QA. I checked all objects if anything missing or inactive in dev box related with this transport. But could not find anything.
Looking into QA, I noticed infospoke was in revised version. Do you have any suggestions about what could be missing in transport? Or what should be the next possible steps to resolve the issue, please. Thanks.
Regards,
Nimesh
Message was edited by:
Nimesh PatelHi Anil, I am having the same problem. My ABAP routine puts the correct selection variables, but the infospoke is getting into 'Revised' version. Can you please let me know, if you have a fix for this?
Thanks,
Naveen -
Finder menus grey (items inactive) after start up
I have the following issue: Recently the menu items in my Finder menus have become grey immediately after start up, i.e. they are inactive. The menus become active after I click around a bit and then select them again. Quite annoying.
Any ideas what the problem is and how I get rid of it?
Thanks in advance.AT LAST!!!!
I've had this problem on my MacBook for a while, it drives me CRAZY!!!!! Luckily, I rarely restart my Mac, but it's nice to know I'm not alone with this problem.
I've tried EVERYTHING - repaired permissions, ran Cocktail on Autopilot, deleted preferences, and the problem still remains.
The only thing I can say with any certainty is if you click the Finder icon in the Dock (which will create a new Finder window), the Menu items will then become 'clickable'. Other than that, I have to wait forever to be able to use them.
Glad I ran into this post. I will subscribe and let you all know if I eventually manage to fix the problem. -
Unable to find resource error after transport
Hello,
there is a strange error happening with some mapping after transporting the content of some namespaces from Dev to Q using file (client) export import.
We already tried the scenario successul on Q, but after some reimports of changes (which still work on Dev) we get the following error in the "request message mapping" step:
"RESOURCE_NOT_FOUIND"
Unable to find resource .............. in the following software component versions: ........
However the mapping is there and can be tested. Any idea on this?But last time one day later the scenario was running fine. Could that really be a problem with cache update?
If all the required objects are present in the QA environment and are active....then yes it can be a problem with the Cache.
I hope that no error was encountered (or import was done properly) during the import/ reimport.
Regards,
Abhishek. -
I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?
Is your Yahoo account set up as POP3 or IMAP?
-
Need to find out how many users are using Siebel Application
Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasunHi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed -
I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?
what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?
Maybe you are looking for
-
When I open a bookmark from the bookmarks toolbar, it opens in a side bar instead of a new tab or window. How do I change this to open a new tab?
-
Owa_cookie.get('DIVEPORT_COOKIE');
I am trying to bypass the login screen but know who is logged in. We have a deployment site in DI Diver which will launch a APEX application from a URL. The user logs into DI DIver and we can write a cookie out stating who is logged in. I want to all
-
Uncaught error handler (global error handling) not working in Chrome FP 10.1.103.22
A few days ago I very happily discovered the new global error handling available in flash-player (FP) 10.1 Now while all works well in Firefox (using Adobe's FP 10.1.102.64), nothing happens in Chrome (using Google's FP 10.1.103.22). I can disable Go
-
Java server/client archetecture
how would I go about setting up a connection with a client and maintaining it by sending info back and fourth
-
Help help please... I'm running Photoshop CS, on a Windows XP machine. After re-booting the machine after an unexpected power failure I have been told that the "Configuration appears to have changed since the time this product was activated. To con