After trying to upgrade my iPhone to 3.0, it now doesn't have any service.
I have the 1st gen iPhone, and tried to update to 3.0 and now I keep getting error codes on iTunes saying that there is an unknown error occured with iTunes, to try again later. Now my phone has no service and can only be used in emergency mode. In the iTunes store, it will show that my phone is connected, but will not pull up any information at all for it. I tried uninstalling iTunes, and then reinstalling it, and still the same thing. It's like my phone has been completely wiped clean. Someone PLEASE help!!!! I don't know what else to do.
Same problem here!
I think there has been too many reports of this kind to say it's not an update problem.
Does anyone have a solution?
Thanks.
JP
Similar Messages
-
hi all, i bought iPhone 4s. while am trying to access my Appstore Genius app appearing that it doesn't have any recommendations. could any one solve my prob?
After some troubleshooting, I decided to order a new battery. I replaced the battery and was then able to get it to restore, however--after I restore it and it comes time to restart the phone, it gets stuck and doesn't turn on.
Sorry, your repair ruined the iPhone.
She does not have apple care and even though she loved this device, she isn't going to buy another iPhone because of all the problems shes had with this one (it's just over a year old).
After you ruined the iPhone with DIY, Apple won't touch it anymore. You should have asked before all these had happened.
I'm an android user myself and I love rooting/flashing new ROMS, so if jailbreaking her phone or doing some kind of super-restore with 3rd party programs might help, I'm all for it-
Yeah, all Android user can think of is Jailbreaking, read this: http://support.apple.com/kb/HT3743 -
Error after trying to upgrade an iphone 4 to iOS 6
Tried to upgrade an iphone 4 to iOS 6, but was asked to connect to itunes. This attempted a restore (several times) but now phone is totally unusable. Can't switch it off and PC does not recognise it as a device. Can anyone help?
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Can't restore, can't power off, and pc can't detect iPad. Error code 3014 when trying to upgrade. Can't even restore to original settings. Opened Hosts files and I did not see 127....gs.apple.com, or other suggested files. Pls help.
Did you see the very end of this about not having enough space left on your computer specific to therror code 3014?
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Error 3002: If you experience this error while updating an iPod touch (2nd generation) or iPhone 3G, please use the standard update or restore process in iTunes (click Update or Restore).
Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. -
After trying to upgrade my iphone to ios5, iTunes is freezing
iTunes on my PC freezes and works extremely slowly. Is the downloaded file causing a problem? - using Windows XP
I have unistalled and reinstalled, without any success.Same problem here!
I think there has been too many reports of this kind to say it's not an update problem.
Does anyone have a solution?
Thanks.
JP -
I was trying to upgrade my iphone 4 to the isos 5, everything was done on the PC. After it was done i thought it was working,but the screen went blank and this wat it says. SIM not Valid... please help me, that's the only phone i have.
If your iPhone was hacked to be unlocked to use with any carrier's SIM card, you just re-locked the iPhone to the carrier the iPhone was sold as carrier locked when new.
-
Tried to upgrade my iPhone 4 to 5.1 and now it is stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
IPhone 4 wiped out after trying to upgrade to OS5
I tried to upgrade my iPhone 4 to OS5, completed the back-up and then when the software was installing I received an error message and now my phone is wiped out. How do I access my back up? I don't want to restore my phone and loose everything it if there is a way I can retrieve my back-up. Help!
Kevin ..
Try this support article > iOS: Device not recognized in iTunes for Mac OS X -
Trying to upgrade my iphone but it will not go pass the Terms and Agreement page. Any suggestions? Thank you
You must scroll down until you see the Agree button. Even after you Agree, another pop-up may ask you to Agree again.
-
I am trying to upgrade my iphone 4 with the new information. The device is still downloading on the itunes page after 10 hours. What shall I do? Will unplugging it lost my information? Help!
Doing the same. Progress bar not moving at all, but it does show 3 hours remaining instead of the 4 hours it did a couple of minutes ago. Go to summary. does it say "iTunes is currently downloading software for the iPhone" ?
My phone went on and it still says phone disabled with the added little gem of my sim now also being locked. -
I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes. Now, my phone wil not work at all. I think it is backed up on my computer, but I am unable to get it to download to the phone. What to do?
Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim -
after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!
you'll want to restore it using itunes and recovery mode
http://support.apple.com/kb/ht1808 -
Good morning
I am trying to upgrade my iPhone via my macbook but the following message keeps coming up and the download does not work
"There are purchased items on the iPhone “Mark Price’s iPhone” that have not been transferred to your iTunes library. You should transfer these items to your iTunes library before updating this"
Please advise how I can transfer these files, I am not sure what files are in question.
I've only had the MacBook a couple of days, I am PC savvy but this is all new to me so please keep it as simple as possible. I am a brit based in Bahrain.
Regards
Mark Priceokay I've done everything regarding the transfer process (via file>transfer purchases) and syncing, so everything on my iPhone device seems to have been transferred to my iMac... however, I still get that message ("There are purchased items on the iPhone..."), trying to upgrade the iOS Have tried several times the same process of hitting transfer purchases via file, but nothing seems to make that message go away! Would have been nice to know which files I actually do need to transfer, which I don't get any info on of course...
Starting to get really annoying this thing.. Any smart suggestions what's going on? -
i tried to upgrade my iphone 4 to ios5 yesterday in the installation process my iphone stopped process and the actuall phone itself has frozen what is showing is the music note icon over a CD disc icon with an arrow pointing upwards and a picture of the usb cable small end . i have gone back into itunes on the left side and nothing comes up for list of devices to restore it or reset it back to prior upgrade attempt. i cant even locate the serial number under edit preferences and devices.. however it shows that all my music was imported and synced .. how do i recover the i phone so i can go back to using it.
From iPhoneWiki:
Try changing the USB port (the back one of chassis is better) and restart computer.
The installed version of iTunes may also be too old. Update iTunes.
Also put your iPhone in DFU mode when doing the above and restore. It's a software error. -
After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.
1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware
Maybe you are looking for
-
How can I use CWGraph3D for Visual C++,How the Variant operate?
I have a VC++ project that use CWGraph3D to show data. How I use it's method Plot3DCurve(VARIANT& xVector,...) what's the VARIANT type. How do I use the VARIANT type to do this job?
-
How to display a screen in a container ?
Hi All, I have an instance of a container lrc_cont_right type cl_gui_container and a screen 0300. How do I display this screen in the container ? Regards, Ashish
-
DMVPN phase I fails when migrating from PSK to RSIG
I am currently is the process of migrating my DMVPN network from pre-share key to certificates. Most of the spokes have come up and are working without any issues but there are several that are not making it past phase I. I have included the isakmp d
-
Hi, Does anyone know why, when I create a footnote, the line following is placed in an improbable and non-correctible space below - perhaps as much as a whole line? If anyone does know, do they also know how to correct this globally throughout the do
-
This is the message I get when I try to launch the manager to sync my Pearl to my new Mac. I've just switched from PC. When I downloaded the software, it synced perfectly the first time. Now I can't get it to relaunch. Tried deleting the software