After turning off and then on l7650 i loose the printer network on pc
i choose not to leave l7650 power on all time every time i power on i have to delite and reinstall printer to print
I had a similar problem and found that it was because my router would assign a different IP address to the printer each time (using DHCP) and the driver was trying to use the same one that was there when it was installed. This can be fixed by going into the configuration for the router and reserve a specific IP address for your printer. That way it will always be the same. When you install it after that, it will continue to work each time.
The instructions for your router should tell you how to configure it this way. It would be different for each one, so I can't describe that. It probably involves browsing to the router from your PC, logging in and looking for a menu item to configure the wireless setup. In there will be a way to "reserve" certain IP addresses for certain things on the network. That is what you are looking for.
Good Luck!
I may work for HP, but my comments are always my own!
If we're lucky and something I say is useful, let me know with kudos! If we're really lucky and it actually solves the issue, then mark it solved! Thanks!
Similar Messages
-
i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
or
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
The browser doesn't start after turning off and turning on the computer
The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!
Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
* check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
thank you -
Iphone5 will go to starter screen but then will turn off and then repeat
iphone5 will go to starter screen but then will turn off and then repeat
Howdy AJBA,
Thanks for using the Apple Support Communities.
To troubleshoot this issue where your iPhone will get to the Apple logo and then restart again, please follow the directions outlined below.
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
Get more help
If you still need help after trying the steps above, contact Apple Support.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Take care,
Alex H. -
What can I do to find out what's wrong with my iMac?
Internet keeps shutting down. I have to turn OFF and then ON. Sometimes, I'm just browsing the web, sometimes on Facebook and lately it happens when I'm on Dropbox uploading.
A few times while editing photos on Lightroom or Photoshop the computer will freeze and I can't do anything but power off ..
What can I do to see what's wrong with my iMac?
Thanks so much!
THi! Thanks for the reply..
No, I do not get any prompt whatsoever.. I can move the mouse but cannot click on anything.. Just frozen screen, can't close a window, can't click on apple symbol on top to try to force quit an app.. -
Have Officejet j5780. Replaced #74 black ink. Did cartridge alignment. Pressed OK button. Hear cartridges aligning. j5780 begins to print. Then suddenly, the words, "turn off and then turn on" are on and power button is flashing on j5780's screen. Rebooted a couple times. Unplugged power cord from j5780 and from wall outlet. Then plugged power cord to outlet then to j5780. Power button is on. Then it begins with same problem. At this moment j5780 power cord is unplugged. When I plug power cord to j5780 and outlet power button is off. When press power button problem is still there.
The document here may help resolve the "turn off then on" message on your Officejet J5780.
You mentioned turning on the power outlet switch. Using an external switch with an inkjet printer may cause issues, the printer outlet the printer is plugged into should always be live. Using an external switch can allow the printheads to be left uncapped, which will cause them to dry out. It will also cause extra ink usage as more ink will be used for startup when power is applied. This is not likely related to your current issue, but for the future please leave the outlet switch "on" for any outlet with an inkjet printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
My ipod touch will not charge or register in itunes. It keeps turning off and then shows the apple logo. I have tried holding down the button and plugging it in. It will show the red battery for a second and then turn off? Any other suggestions?
I have checked for problems with the connections, but from what i can see with the naked eye, nothing appears abnormal. It is very strange, and very sudden. It just stopped in the middle of a charge. The apple store is my next step. I just wanted to see if anyone on here had some extremely eye-opening solution or check. thanks though!
I'm also within warranty, so it's not a huge problem. -
My sound keeps turning off and then gonas back on and also its ending my calls when i got full sigal
Hi
could you please help me as my sound keeps turning off and then gonas back on and also its ending my calls when i got full sigalHi john00000001,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Cheers,
- Judy -
My phone crashed and has an icon showing a usb cable and the itunes emblem. when I connect to itunes it does not recognize my phone and treats it as just iphone. when I try to restore about 9 to 10 minutes into the restore the phone turns off and then on and then loses the connection with itunes and at the end of the download it just asks me to restore it again.
Be prepared to lose everything on your iPhone but it should be backed up in iTunes so you can restore from your backup.
Try Recovery Mode... http://support.apple.com/kb/HT1808 -
I have an iPhone 4 and since I updated to iOS6 I must hit the home button several times to return home or sometimes turn off and then back on. Any thoughts? Could this be related to running low on available storage?
Hold the sleep/wake button and the home button until the phone shuts down and let it restart.
-
hi i have i phone 4s and ios 7.0.2 is updated and problem is wifi and last 3 days i have problem about wifi and im connected wifi and its automatic turn off and then on ...... will you help me
Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.
-
one of my iPhone contacts messages go out as green, not blue, she has tried to turn off and then back on her messages, and it works fine for everyone but me. Mine go as green o her. My phone is iPhone 5, hers is the latest iPhone.
Hello SaSexton,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Have a nice day,
Mario -
No power after turning off and plugging into a new functioning outlet.
No power after turning off and plugging into a new functioning outlet
Perhaps corruption of the Energy Saver settings...
Reset the PRAM cannot hurt.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from http://support.apple.com/kb/ht1379 -
my iphone 4 wont turn on. it justr randomnly turned off and i have tried to hold the home and sleep buttons for a minute and also tried to put it into recovery mode but nothing is working?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
When i plug my Ipod touch 4th generation in it goes to the apple screen and then shuts off and then turns back on and goes to a solid blue screen.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Share Calendar & Calendar Permission Options are Greyed Out
I was trying to share my calendar with my bosses and colleagues but I couldn't. I found my Outlook Share Calendar & Calendar Permission Options are greyed out. I am using Microsoft Office Outlook 2013 IMAP account. Please help me on this matter. R
-
How to insert text in Master-Detail tables
I have created a table for storing web pages as follows, TABLE Pages -- Master (Page_ID NUMBER PRIMARY KEY, NAME VARCHAR2(15), BODY CHAR(1)); TABLE Pages_Detail -- Detail (Id NUMBER, lno NUMBER, Text VARCHAR2(50)); I created a DETAIL_DATASTORE prefer
-
Solstice DiskSuite or Veritas Volume Manager
With regards to Solaris 8, I plan to use DiskSuite to create a few 0+1 volumes for our new database server. Any reason for me to consider Veritas Volume Manager instead? We have an E5000 running Solaris 2.6 with Veritas Volume Manager 3.2, we are onl
-
Dear all, Material is quality managed. I recieved the items and out of total 100 Nos , 50 Nos are moved to Unrestricted and balance 50 are moved to blocked stock thru usage decision in QA11. Now I want bring the 50 Nos in Blocked stock to Qualtiy or
-
Bidding - Create PO in backend with multiple doc type.
Dear Friends, We are working on Bidding Cycle with classic scenario where we want follow-on document Purchase Order to be created with more than one document type. So we defined BSA attribute with ZPO & ZSRM and DP_PROC_TY attribute with ZPO & ZSRM.