After two hours working my iMac can't find HD
After two hours working my iMac can't find HD.
If I will try to start the iMac again, it starts showing only a white screen.
I have done all the things that apple says except format to solve the problem.
The problem stops only if I leave the computer for a while without working.
The Hardware Test finds nothing and Verify Disk says that HD seems to be OK.
If the problem with white screen apears the computer can't start even in safe mode.
Yesterday, I tryed to format HD but I couldn't because the system could not find HD. Disk Utility from Installation Disk could not find either HD.
I closed it and after 30 minutes I tried once again to open it.
The computer started without any problem like magic and all worked perfectly.
Then, my first job was to verify disk and showed that everything was OK.
Then I restarted the iMac and same problem started again...
Similar Messages
-
Hi. I am really frustrated with Apple support. After two hours of trying to navigate their support site, I finally gave up. I really hope someone here will be kind enough to help me find a solution to my problem.
My iTunes always launched with my account, my library, etc. present. Now it launches in a generic form with none of my information present. It also has no "sign in" area so I can get to my data. I'm not sure what happened, can anyone help?
Thanks so much for any assistance you can offer.
JoeI've not noticed this but haven't looked for it either - I suspect you are seeing 'normal' behaviour for AppleTV 2/3 - in other words it's ignoring the iTunes flags.
With AppleTV 1 I used to set playback start/end times using Get Info in iTunes for certain self-indulgent music videos I'd bought which had several minutes of 'acting dialogue' you'd only endure once - this allowedme to shuffle music videos with only the song part of the video being played not all the waffle before the song started. AppleTV 2 and 3 ignore this setting.
Also, with AppleTV1 if you unticked the check box next to stuff you never wanted to stream AppleTV would behave as expected and not display it at all - useful for preventing non-family friendly material from streaming in the first place or excluding seasonal material and do forth. AppleTV 2/3 completely ignore the checkboxes on iTunes ans stream everything though you can of course enable parental controls.
Hard to know if it's the AppleTV's ignoring the info or iTunes not sending it to them in the first place.
Either way send feedback to Apple here:
Apple - Apple TV - Feedback
They won't answer but it may get put on a 'to do' list if enough users complain.
I'm still waiting for AppleTV 2/3 to handle iTunes LP and iTunes Extras!
AC -
SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?
I redeemed my 'card' I got my serial numbers, I downloaded, clicked open, clicked RUN, now where is it? I pray the program itself isn't as hard as the opening of it! I'm a Grami and not so techie. I need phone help. I have the premium - it SAYS I can talk to someone on the phone.
Did you have this page Terri?
BLESSINGS! Praying my story gives God glory!Favor, Peace and Joy!
Caryl
A Little Lower Than the Angels Volume OneHearts Stolen (1839-1844) Book Two Vow Unbroken (1832), the widely acclaimed Historical Christian 'western adventure' Texas Romance Caryl's Website
From: TerrieM <[email protected]>
To: Caryl McAdoo <[email protected]>
Sent: Tuesday, December 30, 2014 5:26 PM
Subject: SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?
SOOOO, now I start all over after TWO HOURS! Heavy sigh. I've downlaoded now where is it?
created by TerrieM in Photoshop Elements - View the full discussionIf you find a phone number please post it. I'm getting desperatefor help already. f the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7054540#7054540 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7054540#7054540 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624. -
Imac can´t find TC after upgrade
I have tried to upgrade my TC from 7.3.2 to both 7.4.1 and 7.4.2. On both the upgrades my imac can´t find TC via airport, and are not able to connect to Internet. Works OK with Ethernet cable though. My daughters macbook does not have the same issue, and has no problem finding TC after upgrade. I use this to downgrade to 7.3.2 after trying every possible option in system settings. On version 7.3.2 everything works perfect.
Some additional information:
I also have to airport express agents connected to the TC (one for airtunes and one to my printer). I also have an Apple TV connected. All are older models and does only work on the g standard. upgrading I have also had some issues with one of my airport express agents and my Apple TV.
My imac is placed almost beside the TC so there is no signal problem.
Anyone has a clue? or am I doomed to stay on version 7.3.2 forever?Apple issued airport update. Issue seems to be solved.
-
Blurb Book in Lightroom 5 on my Mac disappeared after 3 days of work. Where can I find a backed up copy via Time Machine or anywhere else?
Welcome to the WD Community.
1) I assume I can just hook the unit up via USB to my Mac and use iPartiion to reformat the drives, assuming each of the 4T drives will be seen by iPartition as a separate drive. That much seems straighforward.
Yes, and in case you ipartition dont see the unit properly, you can use the disk utilities on your Mac and you will be able to reformat the unit to make it compatible with your system.
2) Is my next step to reinstall the WD software and how do I do that? I've downloaded the Drive Utilities and Securities install apps - I assume I just run these with the drive still connected and that's all I need to do?
Yes, just run the applications.
3) What about the firmware update for Mac - when should I run that??
Normally, firmware updates are released to fix any issues that you might encounter on the drive. the latest one was released on 9/24/2014 and it fixed an issue with the drive dropping off of the list after system wakes up from standby mode.
5) And what about the "My Book Live Duo Setup" app for Mac - is that for a completely different model? What's the difference between "My Book Live Duo" and "My Book Duo"? It's these little things that I find so confusing.
Those are different units. The MBL Duo is a NAS (Network attached system) and the My Book Duo is a DAS (Direct attached system)
6) Lastly, when I have all the software installed, is that when I follow the procedure described in the Knowledge Base article ID 5724, "How to install a My Book Live or My Book Live Duo on Windows (8, 7, Vista, or XP) or Mac OSX for the first time"? Or is that procedure only for "My Book Live Duo" but not for "My Book Duo"??
That procedure is for the network units, not for your drive.
-
I purchased a book through iTunes. I then synced my iPad and went to iBooks. I clicked on the book and it shows downloading but that has been going on for almost two hours and i still can't open the book. What gives? I have done this before no problem.
Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that book, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
Or you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I've done a project on iMovie, after it finished finalising, i just closed iMovie, now i think i've lost all my work because i can't find it and when i found it, the movie was just black - please help
Hi
More info please
• Free space on - Start-Up (Mac OS) Hard Disk ? How much ?
• Any other hard disks connected ? Formatted as ?
Yours Bengt W -
HT5569 Backup started then after two hours Message " prior backup not completed"
Successfully connected to WI FI trying to back up my contacts, etc. Entered "Back up Now" and backup started with the message " expected completion time: two hours. Did not touch the phone. After two hours, I checked the phone. Got message" Prior Backup not completed". Al Aloisi .
Is iPhone in wall power charger?
-
IMAC can't find N network with TC firmware 7.4.1 and 7.4.2
Hello, I have a problem since I upgraded my TC from 7.3.2 to 7.4.1 and 7.4.2.
both my two IMACs can't find the TC N network, only if I downgrade to 7.3.2 they actually find and connect to the TC N network.
please let me know if the only solution is not to upgrade the firmware.
thanks
FabrizioSame here: 7.1.1 works but 7.2.1 & 7.3.1 do not with the same symptoms.
In fact there are now several threads reporting the same loss of internet connectivity. Happily reverting to 7.1.1 restores connectivity. -
IMac can't find network printers
We have 4 Macs in the office and a bank of 4 printers all of which have been working great and connecting together for a while with no issues. However in the last few days the iMac can't find 2 of the printers. We tried to reload them through Print and Scan preferences but they didn't appear in the preferences. Checked all the cabling and hub and everything seems OK. Booted the iMac in Safe Mode and it could see them both straight away, rebooted the iMac and again they did not appear in the list, Tried to share one of the printers from a MacPro and it appeared in the list however sometimes it just won't print to it, it seems to print but nothing appears at the printer. Since then we have reinstalled Mavericks, Verified and Repaired Permissions, Verified the HD, reset the PRAM, all to no avail.
Apart from that the iMac prints to the other printers on the network without any problem and connects to the other Macs with no problems as well. We're using 10.9.4 on a 2.7GHz iMac with 8GB of memory. The other Macs can all see and print to all the printers. We are using a wired ethernet connection, not wireless.
Has anyone any suggestions as to the problem as it's becoming really annoying now.1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have been having Time Machine backup to an external HD which is connected via a Firewire line for some time now. The last backup was 5 hours ago. When I went to back up, it said there was no backup disk, even though it's been connected the whole time. Now the iMac can't even find the disk and it's still connected. What do I do? I have already restarted, shut down and restarted, unplugged both the external HD and the iMac, then restarted, checked all the wires, and unplugged and plugged the external HD several times. I don't understand why the iMac can't find it. Also, when I now click "Select Backup Disk" it takes me to the Airport to find wireless disks and this is not wireless. Help!
This forum is dedicated to the productivity application, AppleWorks. It is not a "catch-all" for how Apple computers work. For those type of questions the best places to start are the forums for your version of the Mac OS or your model of Mac. For you I suggest the Time Machine forum in the Category: Mac OS X v10.6 Snow Leopard.
-
I updated to iOS 6.1.2 on my iPad gen 3 and is unable to use my Google app! Two things happen, 1.) Can't find URL n 2.) Yahoo developers HTML codes are shown.
THey have bought out an update Ios 8.2 perhaps u could try that it may help u unfortunately u cannot go back to Ios 7.1.2 apple wont allow u to i guess hindsight is a good thing u can learn from this and dont be in too much of a hurry to update in the future sit back and wait too see if there are any problems before u update i work on the principle if aint broke then dont touch it...sorry there much u can do other than vent your suggestions to apple support..
-
New iMac can't find the old iMac via Ethernet
I just bought a new 27" iMac and I am trying to migrate data from my old iMac.
I have the two machines hooked together via Ethernet and have Etherenet turned on in the source iMac but the new iMac can't find the old iMac. The pinwheel keeps spinning with no success. What should I do here?Gramps wrote:
What FireWire?
There is no FireWire port on the new machine so this is a non-starter.
Unfortunately you didn't read my post very thoroughly. You are correct, the new iMacs do not include FW however your old Mac probably does. For just that reason and more Apple makes a Thunderbolt to Firewire adapter which you can use if you opt to use FW Target Disk Mode. You can find the adapter by going to your Apple online store or Amazon carries it to. Here is the Amazon link:
http://www.amazon.com/Apple-Thunderbolt-to-FireWire-Adapter/dp/B008RXYOKY/ref=sr _1_1?ie=UTF8&qid=1366831510&sr=8-1&keywords=thunderbolt+to+firewire+cable
However as I mentioned use TM or a bootable clone with Migration Assistant. If your old Mac was using any verison of OS X from Leopard (10.5.x) on at the very least you should have a Time Machine backup!
Also use Pondiini's guide as AnaMusic suggests, it's THE GUIDE for using Migration Assistant and Setup Assistant. He has also created excellent guides for Time Machine too. -
How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.
Try calling 1-800-676-2775. Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk). *May* is only because they may not burn disks for Leopard anymore.
If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
Have you considered Snow Leopard?. Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE. -
I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?
You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion
Maybe you are looking for
-
Help. transfered my itunes liberary via a hard drive to a new lap top. wasnt easy, cant play any thing I bought on the old computer says this one not registered? The box that comes up has my VERY old email on it, I change this to my current one put i
-
Converting MS-WORD characters such as smart quotes into standard quotes
Hi, This is a problem when taking text from a MS Word file and pasting it into a browser editor. The Java code doesnt interpret these smart quotes correctly. Any ideas on how to convert these to standard characters that can be understood by Java Rega
-
NOMAD JukeBox Zen Xtra driver will not inst
I plug in my NOMAD JukeBox Zen Xtra 30GB into my computer and it shows up as USB\VID_04e&PID_428 but the driver shows the ZEN Xtra as USB\VID_04e&PID_40. I changed USB\VID_04e&PID_40?to USB\VID_04e&PID_428 but it still doesn't work. It come up with e
-
HT3371 how to replace internal battery in Macbook Pro 17"
My 17" went dead while sitting in a warehouse waiting for a residence. Grrr.
-
Secondary Color Correction End Softness
Here is a little something that has driven me insane across all versions (sans 8.1 which doesn't work on my machine)... Lets say you are using secondary color correction to mask out the sky above a mountain range - you know, like every single video t