After update 6.0.1 i have problem with soun it become very low pls solve thise by update another can i restoer to 6 another time
after update to 6.0.1 the sound very low how solve thise problem can i restor to ios 6 another time you solve problem battery by update 6.01 but you make problem with rining sound pls solve solve problem
http://support.apple.com/kb/TS2802
Similar Messages
-
Hi, I have a macbook air os x 10.9.5 and I have problems with the app store. It doesn't open anyway. so, how can I install it again or update. I have problems with preview too, the same, doesn't open the application
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Hi, After I installed Mac Lion, I have problem with the tamil font while typing in Neo Office. Especially with the letters "e-Ex: தெ" and "ai-Ex:தை". Please help me I know its not bug from Apple It shd be some problem in neo.
Is your problem due to the keyboard or to NeoOffice Characters? You have to change probably the font. Not all fonts are supporting all Unicode sets. Which font you have in your NeoOffice set to write Tamil? Try with Arial Unicode MS for example.
Are the letter e-Ex and ai-Ex right in your posting? If they are right, how you inserted these letters in your posting? By copy and paste or by typing? If by typing, your question is related to NeoOffice. Probably you should reinstall or update NeoOffice? Or switch to OpenOffice?
marek -
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
I have problems with sync ibooks from iTunes to my iPad since i update to ios7
i have problems with sync ibooks from iTunes to my iPad since i update to ios7
first you plug your device into your computer, then you select the name of your device on the left side of itunes. then you select 'apps' from the top center of the itunes window, and you check the apps that you want to go from the computer to the device
once you've done that, you press the 'apply' button in the lower right corner
this will be the same for anything you want to go from the computer to the device
you'll select the appropriate tab at the top, then only check information you want to go from the computer the device and then hit 'apply' -
I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?
I have problems with buttons and Forms in my trial proof of Indesign CC, how can I fix it?
Moved to InDesign forum.
You can start by telling us what the problem is. -
Hello ! I'm using iphone 5 running ios 7.1.1 and I have problem with appstore error and also Safari doesn't work. what can do I fix this problem ? I need help now my iphone can't do nothing
Need more details. What is your appstore error exactly? and what happens when you try to use Safari?
-
Alter updating my IPad, I have problems getting new apps. After filling in my Apple Id, and answer my 3secret questions, I get THE answer that this session had to be ended without results.
Wow ! I got it running again ! :-)
I called support and got helped by a very friendly guy:
We tried serveral things, what worked for me was to reset my cookies:
- Close all apps by doubleclicking the "home" button - you see all running apps in the lower part of the screen. Then click an hold the first icon until it starts "shaking". Klick the small minus, proceed like that until the row is empty.
- Go in to the control center (don't know what it's called in english, in swedish it's "Inställningar")
- Klick the tab "Safari"
- Klick on Clear cookies and data ("rensa cookies och data")
- Close the control center and start App store
If you now try to download an app you still get the request for the three safety-questions, but when filling them in it works and you can proceed after that. The questions will not turn upp again afterwards...
Good Luck !
Other things we tried was:
- disconnecting the wifi and restarting it
- log out from app-store (in control center, tab "itunes and appstore") -
problem with vpn connection after upgrading on ios6.pls help
I've never been able to share FaceBook posts nor seen the option using the iOS FaceBook app regardless the FaceBook app and iOS version. I can Like and I can Comment, and if I select a link or video to view under iOS 6, I can use the Share option for the link or video, but not for a post.
-
an atuomatically page open like this. http://rnzzz.exclusive-rewards.prizespy.xyz/?sov=62551901&hid=gqmqqssogwsokos&kw =DIRECT&email=email&redid=797&gsid=68&id=XNSX.1%3A%3APEERFLY-r797-t68
If you're getting prompts that say something like this:
To view this web content, you need to install the Java Runtime Environment
then the Apple Java runtime is not installed. Some third-party web plugin is installed that depends on Apple Java.
You may have installed the Oracle Java runtime, which is different. Neither installing nor removing the Oracle Java will have any effect on the prompts. The only thing that will stop the prompts is either to install Apple Java, or to remove the web plugin that depends on it, as I wrote earlier. I don't know all the possible plugins that might be involved, but I mentioned a couple of common ones.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
Strange problem with broadband. Speed very low.
Hi all,
From last Friday I encountered really big problems with my broadband as the speed go dramatically down. I don't know what may be the reason, I'm using HomeHub and between it and computers in my household everything is fine. I haven't heard about any fixes round Aberdeen so have completely no clue what is going on.
Do you have any clue what can cause the problem, for more than 3 years everything was just great. Maybe my HomeHub is old and faulty, it is the 1st gen, white one.
I post speedtest results and ADSL info:
Download speedachieved during the test was - 134 Kbps
For your connection, the acceptable range of speedsis 4000-21000 Kbps.
Additional Information:
Your DSL Connection Rate :18761 Kbps(DOWN-STREAM), 888 Kbps(UP-STREAM)
IP Profile for your line is - 16000 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 0.0:75.22:25.5 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
Upload speed achieved during the test was - 692 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 888 Kbps
DSL Connection
Link Information
Uptime:
3 days, 22:26:20
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
888 / 18,762
Data Transferred (Sent/Received) [MB/GB]:
350.53 / 4.65
Output Power (Up/Down) [dBm]:
11.5 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
15.0 / 5.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
0 / 0
FEC Errors (Up/Down):
0 / 246,017
CRC Errors (Up/Down):
0 / 46
HEC Errors (Up/Down):
0 / 39
Line Profile:
Fast
Solved!
Go to Solution.Update.
First, do you always get reply from MODS? Today my connection dropped and after a while it was on again, I found my SN Margin reset to 6.5 and better bandwith 1205 / 19832 but the speed didn't improve at all. It is 24h since I've sent notice to MODS and I will wait another 24h before contacting them again. What really worries me is FEC Errors field in my ADSL Line details. Last time after 4 days it was 245'000, now after 6 hours I have more than 750'000. Is that normal after connection drop? I've checked speed using this speedcheck provided and my profile is still the same, 16000kbs
UPDATE:: 40 minutes past, 35 MB more dowloaded and 100'000 FEC Errors more :/
I paste details below:
DSL Connection
Link Information
Uptime:
0 days, 6:01:26
Modulation:
G.992.5 annex A
Bandwidth (Up/Down) [kbps/kbps]:
1,205 / 19,832
Data Transferred (Sent/Received) [MB/MB]:
38.53 / 275.66
Output Power (Up/Down) [dBm]:
12.0 / 0.0
Line Attenuation (Up/Down) [dB]:
4.5 / 14.0
SN Margin (Up/Down) [dB]:
6.5 / 4.0
Vendor ID (Local/Remote):
TMMB / IFTN
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
1 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
Error Seconds (Local/Remote):
1 / 0
FEC Errors (Up/Down):
0 / 769,697
CRC Errors (Up/Down):
0 / 8
HEC Errors (Up/Down):
0 / 5
Line Profile:
Fast -
Re: Strange problem with broadband. Speed very low...
What is going on with my BT Broadband speed...?
Download 0.25 Mbs and up load of 0.09 mbs..
This just can't be right...?
Frustrated subscriber.. Glenn :-(I moved you post to start a new thread as previous one was marked as solved by originator
welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results .
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Updated Kaspersky to 15.0.0.463(a) - ( comes with "safe money" - now turned off).
Updated Firefox from (old) version to 32.0.3.
Barclays bank site loads properly, and allows access to accounts BUT when I try to look at a statement, Firefox "not responding" and a blank/ unresponsive page is displayed.
In order to acheive any movement I have to close firefox... this gives rise to windows wanting to send error data, and Firefox apologising for loosing the tab.
None of which allows me to do essential banking transactions.
It is this machine that has the problem - I can access without problems via work computer (using google Chrome)My guess is that your statement is a PDF document, since banks and other companies often use that format for statements.
Firefox has various options for viewing PDFs, including a built-in PDF viewer (not as full featured as Adobe's), or the option to use a plugin such as Adobe Acrobat, or to launch the PDF in an external application. This article describes how to experiment with that setting: [[How to disable the built-in PDF viewer and use another viewer]].
On another subject, your plugin list has various plugins described as "Google Chrome Extension". I haven't seen that before. Could you review the list and see whether they really should be active in Firefox or can be deactivated?
Open the Add-ons page using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Plugins.
For those that are not essential, I suggest changing them to "Never Activate". This might not take effect immediately in that window, but should disable them in new windows. -
After install of 10.9.2 have problems with rebooting
I have had to reinstall 10.9.2 and won't dare reboot because:
After install of 10.9.2 I reboot and got some kind of error that would not let me get to the logon screen. I'm not sure exactly where the hang up occurs but the output looks something similar to when booting with opt-S. The only thing I remember are words "osx version not set." The only way I could get things working again was to do a fresh install.
The second error occured after installing wireless mouse software that required a reboot. This time I could get to the logon screen but my keyboard no longer worked. In other words, there was a prompt for username and password but no keypresses were being registered. Once again the only thing I knew of to do was to reinstall.
Is there anything I can do to be able to tell if there is some latent problem waiting to happen if I try and reboot? Or should I just keep the machine on all the time now?
Thank youGo step by step and test.
1. Power cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode
http://support.apple.com/kb/PH11212
2 Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
3. Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
4. Safari > Preferences > Privacy > Cookies and all other website data:
Press “Remove All Website Data” button
5. Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions -
I have problems with Itunes in my iPhone 4S since the newest Itunes update
When the latest Itune released was suggested in my Itunes I pressed yes, and I was asked to reset my Iphone. I did that and lost all the contacts, emails,etc, but I recovered them through I cloud. What I did not recovered was anything I had in Itune in my Iphone which was not synced with my Imac, I had customised it. Now I can not sync with my Mac. I can not even play the songs I have in my iphone, there are greyed out and go by very quicky and I can not play them. I want to be able to sync back and forth playlists between my Mac Air and my Iphone. Thanks for your help.
Thanks i am glad its not just me getting this problem! It asks me to put it back to factory settings but hw do i do that when i cannot get it recognised in the first place? Any ideas please?
Maybe you are looking for
-
Custom Validation in ESS Edit Screen
All, We have a requirement in ESS Address screens that all country users should key in only English Data. We are in SAP ESS SP12 and all the Address Components are in WD Java. The validation on all the address screen fields for this requiement has to
-
Hi Friends, In oracle 11g single instance, are there a max number of services? some DAB likes to create different service to handle different task. In this way, any potential issue/risk with performance will be linked? Thanks newdba
-
SWC and Unit for PI 7.0 for a Java application
i want to integrate my Java application with XI. In SLD what should i mention the SWC and Unit for PI 7.0 for a Java application to be integrated????
-
Unknown system keychain for airport network
Hi, i wonder if anyone can explain me this: I have found in my keychain access a totally unknown "system keychain", under somebody's name. the Kind says "Airport Network Password", the Account says "Person Name " , Where is in "Airport Network" and i
-
How can I set my Messages to view by date ?
How can I set my Messages to view by date ? I don't like them to organize by thread. Are there any software to help me?